Help me please

>>31801325
what the fuck

>>31801325
Cleaning rod down the barrel and push it out

>>31801331
It's really stuck in there

>>31801339
I will have to buy a cleaning kit

>>31801325
Cleaning rod down the barrel, couple smacks with a hammer should pop it out. Afterwards, give the chamber a serious cleaning. I had recurring issues with stuck cases, eventually realized that my chamber brush was worn down so much that it was hardly even touching the sides. Got a new brush, cleaned it up real nice and it hasn't happened since.

>>31801325
>Wolf
Not surprised

>>31801355
Okay. Like I told another anon I will need to buy a cleaning kit
>>31801356
I thought wolf to be highly regarded. Is that not the case?

>>31801325
Welp, time to break out that cutting torch you bought 3 months ago but couldn't decide what to (you)se it on first.

>>31801354
Shove a few lit fire crackers down the barrel with long fuses then plug up the muzzle. The blast will force it casing out.

>>31801366
>Okay. Like I told another anon I will need to buy a cleaning kit
Well we've figured out the cause. Keep it clean and lubed, anon.
>wolf ammo
>highly regarded
Pick one. It's cheap, that's about all it's got going for it.

>>31801325
coat hanger abortion

>>31801356
>>31801366
wolf gold is brass cased ammo made in taiwan. it's "ok" ammo. why it failed to extract could be several things, but it seems to have some rim tearing there, which can happen with particularly dirty powder or some other crap in the chamber that seals it too tightly.

if you want quality ammo, just buy federal american eagle.

>>31801389
Thanks. I didn't know about wolf ammo being shite so I don't think I'll be going back to shooting it anytime soon.

>>31801354
>he bought the boresnek meme
>he bought the highspeed low drag no rod needed

>>31801411
Its fine, you should get a new upper because yours is shit.

>>31801411
Don't listen to these fuckheads, its totally legit ammo and it's all you should shoot. 90% of these people shoot steelcased (which is 10x worse)

Buy a fucking cleaning rod, cheap ass. If you're too stupid to find some form of stiff rod laying around and use it to knock out the case you probably are too stupid to own a gun.
>I thought wolf was well regarded
Yeah, well regarded for being cheap and shitty, learn to not be retarded OP

>>31801411
Wolf Gold 223 is not "shit" . But you do have to clean the chamber, especially if you've been shooting steel case before you put brass back in it.

>>31801441
Hey, fuck you. Learn not to be a dick sometime asshole.

>>31801325
OP I've had this issue before, though it happened when I was using steel cased ammo. I have learned that it happens when your extractor pin isn't grabbing the round properly OR the barrel was gummed up enough to basically glue it in. Either way, push it out and clean your barrel. Then lube properly and try shooting again. If it keeps doing it you might need a new extractor digglydoo

>>31801453
Fuck you

File: 1474501061202.jpg (34KB, 400x300px)

34KB, 400x300px

thats what you get for buying an AR

>>31801467
Thanks anon

>>31801481
FUCK YOU COMMIE FAGGOT

File: 1477137345230.gif (2MB, 200x133px)

2MB, 200x133px

>buys AR 15
>too cheap to buy a cleaning rod

>>31802192
>owns any firearm
>doesn't own a cleaning rod

Ftfy

>>31801411
>>31801450
This.
Wolf gold isn't shit tier, but it's not ammo you should really trust either. At least its not steel cased.

>>31801354
...Wait, how the fuck do you own ANY rifle and not have a cleaning rod? Do you not change your car's oil, too?

Op. Did you clean your gun before shooting it?

Guns are not ready too fire out of the box you need to give them a good scrub and lube first

File: cleaning rods.jpg (172KB, 1186x747px) Image search: [Google]

172KB, 1186x747px

>>31801325

File: 1417988151879.jpg (63KB, 400x801px)

63KB, 400x801px

>>31801409
>if you want quality ammo, just buy federal american eagle.

Shoot a bullet down the barrel from the other end to get it out. Youll want to be careful to make sure that the other rifle you use to shoot the bullet down the barrel of the stuck gun is perfectly aligned. Works like a charm.

>>31801325
Gun is kill. Time to bin it OP.

File: 1462839646786.jpg (144KB, 800x1200px)

144KB, 800x1200px

>>31801354
Do you think life is a fucking cartoon m8?

>Be me
>shoot wolf gold, tulammo steel, American Eagle, Brown Bear, Federal Gold Medal Match down the same barrel
>even mix steel and brass in the same mags if I am feeling saucy
>haven't touched my chamber with a brush, ever
>lube my BCG every 200/300 rounds
>had one failure to feed with 1000 rounds down the tube
>that's the only malfunction the gun has ever had

¯\_(ツ)_/¯

Get a fucking stick lad

>>31802309
This is best solution.

>>31801366
Make sure to get a quality brass rod. Those shitty Hoppes aluminum rods snap constantly.

>>31802385
what BCG?

I have a NiB one and just wipe it down with a CLP rag, no malfs going on 1500 rds with tula and wolf steel

>>31802428
Seekins bolt and carrier

>>31801467
>glue
Thats actually the polymer coating melting off the casing.

>>31802494
It's not, go away

>>31802494
oh god not this fuddlore again

op what make is your rifle/barrel? Wolf gold is pretty decent ammo and shouldnt have done that unless you shot steel case first

Steel cased expands less than brass. You're much less likely to see this kind of failure using steel cased since it doesn't form as tight of a seal.

>durrr steel cased is bad because steel is as hard as your barrel
>hurr the steel cased ammo tears up your extractor and ejector

>>31802993
Nothing especially wrong wiht steel case, but since it doesn't expand to the chamber dimension when fired, powder by products get on the chamber walls.

>>31803662
true, it tends to be dirtier. This can be a problem, especially in ARs. As far as the lacquer or polymer coating melting and sticking to the chamber I can't comment directly but I've never experienced anything like that. In my opinion this would be a non issue in semi-autos, since the firing and subsequent extraction takes place so quickly, it would be impossible for the melted polymer coating on the case to harden and "glue" the casing to the chamber. Additionally, I don't know exactly what type of polymer is used to coat the cartridges, but it seems unlikely that it would be thick enough (have a high enough viscosity) to stick around in the chamber for any significant length of time. More likely, whatever thin layer that develops after a few hundred rounds (most cartridges would have literally 1 mL total or less polymer on them) simply runs out of the gun or boils off and evaporates.

>>31803802
>this

>>31801325
Cum on it and take pics.

>>31801325
your bolt (extractor) is likely shit if it wont extract

that or your barrel is shit

wolf gold is fine ammo 70% of these posters dont even own guns

Its a brand new ar. It needs a break in period like any other mass produced piece of clockwork. Knock it out with a rod and go dump a few more mags until things mate better.

Did you add enough gas in it?
It might have ran out.

File: 1476900507224.jpg (11KB, 236x313px) Image search: [Google]

11KB, 236x313px

>>31804875
>break in period

>>31804896
Works for boots works for guns.

>>31804917
>boots = guns
keep em coming

>>31804875
>It needs a break in period like any other mass produced piece of clockwork.
>AR
>In any way comparable to a clock
>Thinking a fucking CLOCK is a good example for something that needs to be broken in.

My shitty fucking Seiko 5 is way more complex than your piece of shit AR and has worked perfectly since day one. LIKE ACTUAL FUCKING CLOCKWORK

Okay maggot, this is a simple fix.
First you get another bullet and place it on the other end of the barrel.
This will be hard, the rifling will dig in almost immediately, so have a hammer handy on standby.
Shove the bullet in by hand BY HAND as far as you can.
If you can still see copper, use the hammer.
The hammer might set the charge off but the resulting gases will force the casing out of the other end of the barrel.
And for fucks sake, CLEAN YOUR GUN!

>>31801325
5.56 or 223 chamber?

>>31805128
Aren't they the same bullet?

Alright fuckers OP here. I didn't by anything to clean the rifle because I didn't see some malfunction like this coming right off the bat. I'm going to buy myself a cleaning rod and try to hammer the casing out without bottoming out the casing. After that I will lube that little bitch like there's no tomorrow.

>>31801354
HAHAHAHAHAHAH

>>31801339

this

also wtf m8 >>31801354

>>31805057
Seiko is a nip brand for weaboos that can't afford a real mechanical watch :^)

>>31805067
I have seen this work once.But how did you get the other casing out of the front of the barrel?

>>31802309
don't be an ass

>>31805563
We are trying to help dumbass.

>>31804886
don't be an ass

>>31805547
Notice how I said it was shitty?
It isn't even made in Japan, so no weeb shit here.

>>31805067
don't be an ass

>>31805579
no you're not - you're giving completely asinine things for him to do. You have school tmw - go to bed.

>>31805221
Outer dimensions of the round are but the chamber is different and they function at different pressures.

>>31805584
>>31805598
Stop repeating yourself.
>>31805607
It's physics, kid.

>>31801354
Wtf? You're supposed to clean every weapon before using it. Factory oil is alright but it burns all shitty like. You gotta break your gun's virginity by taking off her clothes first and then getting her ready for the big day

>>31805607
Op here and I'm only kind of retarded so I'm not doing any of the dumb shit they are telling me to do anyway.

File: Dont laugh.gif (3MB, 286x258px)

3MB, 286x258px

>>31805563
>>31805598
>Two people gave OP the same solution.
>Call them an ass because they want to give him a quick fix because of his lack of cleaning rod.

>>31805607
You're dumb for thing anyone is that dumb.

File: the_wind_is_troubled.jpg (61KB, 1024x576px) Image search: [Google]

61KB, 1024x576px

>>31805650
Get a cleaning rod and the rest of a cleaning kit
Disassemble and clean gun
Ask somewhere other than FUCKING 4CHAN for advice on how to do shit

>>31801356
Wolf Gold is brass case ammo idiot. Any other brass case ammo would have done the same thing.

>>31802192
AR15s are the poorfag rifles of this decade.

Next decade it will be slingshots at this rate.

>>31805691
Rock best weapon.
Cannot ban rock.

>>31805668
>Not trusting 4chan for advice.
Pff, please, if Hitler can teach someone about gas systems this place is legit.

>>31805665
then you really don't know much about the world. you CAN clear barrel obstructions by shooting it out. many people have done so.

>>31805668
YouTube turned out to be helpful

>>31805745
I know I have before.
It's fast, effective but dirty as fuck operation.
you need copper cleaner like a motherfucker after doing it.

>>31801426
boresnakes are good shit though, just not for pushing out stuck cases.

and yes Wolf is known for stuck cases in ARs.

What are common ways to avoid stuck cases besides cleaning the chamber and using the right ammo?

>>31805761
Hahaha OH REALLY WOW that sounds SO FUCKING SMART

>>31801325
Break AR over knee, set into pond as offering. Buy a reliable nagant instead.

File: HeyEdBoy.png (114KB, 517x375px) Image search: [Google]

114KB, 517x375px

>>31805786
You are sounding most upset Ed boy!
Do you need a romp in the turnips?!

Collapse the stock and slam the butt of the rifle on the ground once or twice. It should come out

>>31801339
A wooden dowl rod works too.

But what kind of a dumbass doesn't have a cleaning kit?

You jammed your fucking rifle and there are gooks in the wire!
FIGURE IT OUT!

File: do not want.jpg (20KB, 200x300px) Image search: [Google]

20KB, 200x300px

>>31801354
>spend a few hundred bucks on an AR+ammo
>won't drop 20 bucks more for a cleaning kit

>>31801325
MORTAR THAT BITCH

>>31806008
We was told the rifle cleans itself.

>>31801453
>be retarded
>get called a retard
>cry
wew

Op clearly used a bore snake that stripped out his rifling causing his barrel to lodge the cartridge.

>>31806017
RIFLE SHITS WHERE EATS!
NOT CLEAN!

get a piece of string, tie a little noose, put the noose around the shell.

>>31801339
Had this happen once, turned out case ruptured and embedded itself in the chamber, cleaning rod broke trying to get that shit out. Finally got it out after general black magic and saw the pit left from the case rupturing. I suggest you just take it to a gunsmith and let them handle it, if the case ruptured expect to spend a decent amount of money

>>31806032
>String.
Trying to teach him to turn his gun full auto I see.

>>31802226
>>31802370
>>31805526
>>31806008

do you retards realize what the concept of new means ? November 9th starts the new gun apocalypse when Hillary wins. You can always get a fucking cleaning rod later.

>>31801354
>bought AR
>didn't buy cleaning rod
this is why you need to pay attention in history class

>>31806052
It's an AR a whole new barrel is like $150

>>31801325
Okay, so what brand barrel?

>>31806069
>do you retards realize what the concept of new means ? November 4th starts the new gun apocalypse when Obama wins. You can always get a fucking cleaning rod later.

>>31806017
>already got bolt open
>case rim totally obliterated
What makes you think mortaring will have any effect here?

>>31806069
What if they ban cleaning rods?
Why would you need one if guns are banned, citizen?
Do you have something to confess?

>>31801409
I like prvi partizan.

200 rnds of 7.62x51M80 for $119.00

Berdan primed, and it burns super clean.

I haven't checked the 5.56 prices- lemme see....$75/200 rnd battle pack, or $360/1000 rnd battle pack x5.

Ive had no issues and ive shot 600 rnds of 7.62.

File: 412.png (250KB, 550x700px) Image search: [Google]

250KB, 550x700px

>>31805648

>>31805221
This might be the culprit

>>31806069
a haiku
>panic bought a gun
>cuz hillary will ban them
>can't even shoot it

>>31806248
"i'll stop the liberals!"
"my shiny toy shoots real well"
"need to fix it though"

File: 64d.gif (204KB, 320x180px) Image search: [Google]

204KB, 320x180px

>>31805648

The round isn't live still is it?

Cause hitting it with things is bad.

>>31806131
Prvi Partizan is good shit for the price, and makes almost any cartridge you can think of.

Push the bolt carrier all the way with the forward assist and pull it back.
If that doesn't work, push it out with a rod.

Piss down the barrel.

>>31806322

Any rifle round is good. Their handgun ammo is a bit more expensive. I just stick with Remington range buckets for 9mm. Tried fiocci and that walmart brand stuff in the brown box. They all feed alright. Winchester is fucking garbage. 2 fail to fire and a couple of visibly defective rounds i didnt evem try to fire in a 100 rnd box.

File: g_1280.jpg (38KB, 600x568px)

38KB, 600x568px

>>31801354
>Pay my LGS 10 bucks to clean my gun

H-Hahahaha. Get a load of this faggot. R-Right guys...?

>>31806446
Amazon

>>31806305
Let's play spot the noguns

File: 0IakHHs.gif (36KB, 333x250px)

36KB, 333x250px

>>31805648

>100+ comments
>no mention of the massive ring of brass shavings
>no mention of the cartridge rim being seriously FUBAR
>no mention of seriously FUBAR primer strike
Seriously, what the fuck is wrong with your gun
Also step it the fuck up night /k/

>>31801325
brass rod + rubber mallet

>>31801325
1. Pour some gunpowder down the barrel
2. Light a match and place it just inside of it
3. Block the barrel, put a plug in there or something
4. Put some pressure on the end of the barrel so the plug doesn't go flying
5. Tilt the gun so the gunpowder ignites and the casing will fly out the other end.

>>31806131
PPU is boxer primed these days

>>31807652
Are you sure that's standard operating procedure, anon? That doesn't sound correct, anon.

>>31801354

And so the epic bread begins.

Let's find some good alternatives for our list brother. I recommend barbed wire. It's stout enough to do the job and the barbs will help break in the rifling for an extra smooth shot.

File: image.jpg (116KB, 872x685px) Image search: [Google]

116KB, 872x685px

>>31801354
>not owning a cleaning kit

>>31809860
Don't be a goddamn pussy.

>>31809866
Plz no epic bread

>>31801325

OP, did you fix it!?!??

>>31810590
No I still don't have a cleaning rod. It was late last night when I asked and I just woke up for the day.

>>31810599

Are you in Missouri? I'll drive there and unfuck your gun for you if you're close-ish

>>31810680
No but thanks anon

>>31810457
What can I say? I am what I eat.

>>31801339
This, and inspect your chamber for rust or anything else that might catch a casing.
You'll probably have scratches going down your casing from the chamber rust scratching it on the way out too.

>>31801325
your only option is obviously to commit ritual suicide

Just get something to use as a cleaning rod and bang it out. Then inspect the brass and your star chamber to try and see what fucked up.

>>31801411
It isn't you just need to clean your fucking rifle, gobshit.

>>31805608
.223 out of a .223 chamber OK
.223 out of a 5.56 chamber OK
5.56 out of a 5.56 chamber OK
5.56 out of a .223 chamber NOT OK

>>31806021
>cohesive human language
>this post
pick one

>>31802416
Or go for a dewey rod.

>>31806417
PISS IN IT OP
PISS IN IT AND TELL KARL ABOUT IT

>>31811450
>star chamber
who invented this autism and why does it still exist

>>31801325
Get another ar15, and shoot a bullet down the barrel of the one you have now. Put the barrels tip to tip and fire. Presto.

>>31801325
Try mortaring if you can still grab the edge of the casing.

File: 147743933214.jpg (23KB, 209x272px) Image search: [Google]

23KB, 209x272px

>>31812337
i have to ask because i'm a no-funs fag.

What is the difference between .233 and 5.56? isn't the same ammo?

>>31810680
I'm in STL

hey you wouldn't happen to have a complete upper you would be willing to sell would you? Trying to slap something together in time for nuggetfest, have a lower that only needs a stock kit, need an upper to complete the rifle

>>31801325
Take it to your nearest police station. No need to put it in a case because the gun isn't functioning. Walk in the front door and ask the clerk if you can borrow a cleaning rod. They keep a few up front for just such an occasion.

>>31812746
Same bullet, slightly different casing

>>31806096
Case rim not totally obliterated
>yet
downwards force + gravity (???) = profit and maybe unjam that casing.

They're lacking a necessary tool to maintain their rifle so I don't really care if they break their own stuff.

>>31812746
Yes & no
Mainly depends on if it's nato, Remington or Wylde.
Truth be told you run all three through most any ar, the issue comes down to barrel life.

>>31812746
Generally: 5.56 is loaded hotter than .223
This means that 5.56 can be dangerous to a chamber not designed for 5.56, but a chamber in 5.56 can easily fire both cartridges.

>>31812947
I don't believe that. .223 is the original round. US took this round, gave it a specific loading, and called it 5.56. 55gr bullet is M193. 62gr bullet is M855. Other alterations come with other names. The casings are identical, but while .223 can be just about ANY loading, a 5.56 will have a very specific loading.

Same goes with .308 and 7.62 nato. .308 came first; a civilian round. It was taken by the Military, given a specific loading, and thus was the 7.62 Nato. 150gr is M80 Ball, unless it gets a different bullet for non-standard use in which case it has a different designation.

If anything, I'd say .223 or .308 could be more dangerous than the Nato counterparts. Some hand-loader who is just shooting them through a strong Mauser action might go ahead and load them up as powerfully as he damn well can. Overload them like mad. Meanwhile with 5.56 or 7.62, it will be of a specific loading that automatics are designed to be able to manage.

>>31801325
just get a 2' long ¼" wooden dowel, run it down the barrel, and then tap it with a hammer to knock the case out.

>>31813822
is there any difference in the design of the gun or is it just materials used?

>>31801481
This.

>>31805778
i used federal in my complete BCM upper ar, had like 4 stuck cases over the course of 4 mags. to the point i had to ram it out with a cleaning rod, i fell for the ar reliablity meme and sold that shit not to long after

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

FUCKING GOT IT YES!

File: 1471465822748.jpg (293KB, 1016x568px)

293KB, 1016x568px

>>31814297

how did you do this

op plz

File: 1405302470493.jpg (75KB, 960x574px)

75KB, 960x574px

>>31814297
yes op tell us your sekrets

>>31812413
It's military slang because it looks like a fucking asterisk and your average private doesn't know what a fucking asterisk is, but gets "star."

>>31814167
As far as i'm aware the dimensions of the rifles internals are the same, however the materials and construction techniques are different. You should probably look it up because i'm not an authority on the matter.

>>31813822
Bullshit. Thats is an oversimplification.

It has less to do with pressure of the loads and more to do with the differences in the size of the leade beween a SAAMI spec .223 and a NATO spec 5.56 chamber and the difference between the way SAAMI and NATO measure chamber pressure..

Different leade specs, different ways of measuring pressure, mean apples and oranges.

https://www.americanrifleman.org/articles/2013/3/4/223-remington-vs-556-whats-in-a-name/

>>31814331
>>31814420
Shot it out with another ar

>>31801325
drill hole through used percussion cap, get paper clip, feed half of paper clip through previously drilled hole, pull other half of paper clip

File: uxHQkG4.png (913KB, 750x616px) Image search: [Google]

913KB, 750x616px

>>31814696

can't be true unless the AR was made by glock

>>31814725
this is actually a good idea

>>31814725
No way a paper clip would work there when the extractor only managed to chew up the brass.

>>31814725
>>31814852
I think drilling a hole, then feeding wire/string with a knot or something in it from the barrel and through the hole, then yanking on in from the receiver side might work

>>31815051
Definitely sounds a lot more plausible than a paperclip.

>>31801354
Get a long steel rod that will fit the barrel and casing, use that in place of cleaning rod to remove stuck shell, next time dont buy shit ammo, purchase cleaning kit asap, and for gods sake get the required materials to maintain a weapon before you get the weapon. Dumbass.

>>31812413
never-served spotted

File: 1444978304491.jpg (27KB, 540x540px) Image search: [Google]

27KB, 540x540px

>>31815344
>never-served spotted
danks u 4 cervux

>>31815344
Thank you for that service you did. That'll be about $15,000. Cash or credit or repo?

File: fe-e.jpg (46KB, 495x489px)

46KB, 495x489px

>>31814455

> Burgers wage a bloody campaign to escape from the 'Tyranny of the King of England'
> Refer to the locking lugs on their service rifle as the star chamber

File: Coundom.jpg (48KB, 500x375px) Image search: [Google]

48KB, 500x375px

>>31801354
>I will have to buy a cleaning kit

File: the-star-chamber-273983l.jpg (65KB, 386x550px)

65KB, 386x550px

>>31811450
>Then inspect the brass and your star chamber

>>31806248
guns are bad things
niggers like them too
kill two or three

>>31816994
its
>5
>7
>5
Faggot

>>31817070

I don't know very much about revolvers, but shouldn't the cylinder gap let out the excess pressure and prevent a blown primer?

File: 1474650835952.jpg (11KB, 240x240px) Image search: [Google]

11KB, 240x240px

>>31801354

>>31806072
I like you.

>>31801325
Throw it back in the trash and get an AK.

>>31819795

>OP takes your advice
>Gets an AK
>Same thing happens
>Everyone tells him to use his cleaning rod
>"I will have to buy a cleaning kit"

You can't fix stupid.

>>31819812
>an ak not coming with a cleaning rod standard

>>31819896

>underestimating OP

>>31805668
/thread

Hey guys I get my first rifle in a few days and don't want to end up like OP.

Any online purchasable cleaning kit you'd recommend?

>>31801453
Make sure you have the muzzle pointing at you while you're trying to hammer out that round. You'll get better translation of force. Good luck.

>>31801481

Happens with AK's and bad ammo too.

Here's a guy with unfired cartridge stuck in AK:
https://www.youtube.com/watch?v=m3-yTpRS5KQ

File: 1442833742850.gif (1MB, 500x250px)

1MB, 500x250px

>>31801354
Jesus Christ. The fuck is wrong with you?

Is it a Bushmaster? Buying one of those would be your first mistake, mainly the newer ones that have improperly reamed chambers (IMO, this is your problem here).

Larry Potterfield will consume your everlasting soul and eat your children, but follow his instructions and buy a broken shell extractor or cast the chamber with cerosafe. Better yet, take it to a gunsmith and have him look at it. Alternatively, buy a barrel wrench, upper receiver vice block, a bench vise and a new barrel and never have this problem again after you rebarrel your chopper and find out you also have a weak extractor spring, it's over gassed, the gas tube is bent and your buffer spring is several coils too short.

After you fix all of that, brag about your newly acquired gunsmithing prowess. Then, further hone those skills by taking to your bench grinder and buffing the hammer and trigger sear surfaces to an uneven blunt roundness, akin to a river stone, and you might be lucky enough to turn your plane jane AR, into a full auto M-16 (without all of that semi auto bullshit to begin with)! Good luck and remember to always say yes to strange men walking up to you at gun shows who offer you full autos and explosives.

https://youtu.be/bDYx5-1AZdk

Watch this.

This has nothing to do with regular cleaning and everything to do with the quality of the rifle or ammo used.

>>31802267
>multi piece rods
Anon, please...

>>31805507
You didn't clean it before firing it? Shocker that you had a failure to extract. It couldn't be the lack of proper lubricant

>>31806056
Yeah ok my sides

>>31807202
Hello noguns

>>31820715

If you're only pulling the rod through, multi-piece is fine. And even if you push it through, I'm still not convinced a brass rod is going to do any more damage to a barrel than copper bullets scraping down the lands at 3000fps.

>>31817097
.... Look at the picture again. The joke is where the firing pin is striking.

>>31820775
Why, though? How? How is the hammer of a revolver SO fucked up that it hits ALL OVER THE BACK OF THE CASING?! I mean, if it was just an issue of alignment, then there would be dents on EITHER SIDE of the primer, yeah? How the fuck does the hammer go to the TOP of the casing?! WTF Taurus?!

>>31802625
>bitches about "fuddlore"
>uses the same reasoning

>>31821285
It can't.
That picture was the result of a load of birdshot.

>>31801325
>brand new rifle
>OP didn't clean it out first

it's fucked, buy a new barrel and install it yourself.

>>31801325
https://www.youtube.com/watch?v=Jg7JmEA-tbY

>>31814297
Gonna reload that?

>>31821285
Maybe casings have been reloaded numerous times. Misalignment would result in the pin hitting to the right or left of the primer. But you put the rounds into the cylinder at random angles each time. So, dents all over.

>>31801354
>doesn't buy cleaning kit
>wonders why gun jams

>>31821705
I guess he's not using a revolver, a bolt action, a Glock, or an AK...

Jokes aside though, any gun owner worth their weight in salt should have a cleaning kit. Those ones that come in the buttstocks of SKSs, AKs, and the like, those can be used, but seriously, get a proper cleaning kit. Use that cleaning kit in the buttstock for innawoods, not for at home where you can do a proper job of it.

OP here I didn't know it was factory new when I bought it and this is my first gun so you guys can go fuck yourselves about the cleaning kit thing. I got it fixed now anyways.

File: 1470570026641.jpg (122KB, 510x755px) Image search: [Google]

122KB, 510x755px

>>31801453

>>31823150
>factory new
>pawnshop gun with unknown amount of owners and unknown round count
try again

>>31823726
I just said it was factory new so how could there have been an unknown amount of owners

>>31823760
Hah was it actually new/unfired? I thought you got it used

>>31802267
Hey anon, not OP, but where did you get your cleaning supplies, the brushes and such?

>>31823806
It was. I should have known desu. It had absolutely no scratches whatsoever.

>>31823831
*desu not desu. Fucking mobile.

>>31823843
To be honest holy fuck

>>31812359
actually, this post is both cohesive AND coherent. I suspect you meant coherent. It is missing a comma, but not an important one.

I think the problem is with your reading comprehension.

>>31823843
>>31823854
The problem is not your mobile desu

>>31801325
>WOLF AMMO
>NO CLEANING KIT
I SERIOUSLY HOPE YOU GUYS DONT DO THIS

>>31823915
It's 4chan filters

>>31805939
An AR fag obviously

>>31806103
Make cleaning rods illegal.
AR fags get all BTFO'd as their rifles start to fail.
Gun problem solved.

>people actually think this rifle is reliable

>>31805547
Seiko makes good and dependable diving watches. Go be a faggot somewhere else.

>>31824273
>people actually fall for this bait

>>31814575
>https://www.americanrifleman.org/articles/2013/3/4/223-remington-vs-556-whats-in-a-name/
>posts correct answer
>no comments
o/k/

>>31801374
T. Acme Consulting

>>31824783
(you)

can you leave now?

>>31805563

Only an ass would get themselves into this position to begin with.

Fuck off, this isn't a hugbox.

>>31825112
That wasn't even me (OP)

File: 1474717326034.jpg (125KB, 1375x749px) Image search: [Google]

125KB, 1375x749px

>>31801354
>he owns guns
>he doesn't have a FUCKING CLEANING KIT!

>>31801325
>W O L F

>>31801339
Do this.
>>31826274
This guy can fuck right off.

>>31826137
A gun. This is my first gun.