grease>oil edition
old thread >>31502363
>>31506094
>grease>oil edition
«no»
>>31506094
In with raped fittings
>>31506094
CLP>everything else
>>31506131
So which end did you stick your dick into?
How loose was it?
>>31506134
oh lawdy stop that before the motor oil shills show up
>>31506094
Someone ask me how I got my crush washer to compress. Please
>>31506094
>That pic
Fuck that shit, I just hit it with CLP all over.
Ok Im about half hammered and trying to figure this out. What is the difference in these SOPMOD stocks? Theres the B5, B5 Enhanced and theres an LMT one, am I missing any others?
>>31506094
If I use some black walmart spray paint on my barrel will that hold up to heat?
>>31506142
Did you mail it to Giddy for a mauling?
Have your wife sit on it?
Have your snek squeeze it?
I know you didn't simply find your testicles and wrench it.
Is there any thread on K that is more of a circlejerk than the ARG?
i mean this is a really seriously lubed up round robin in here
>>31506140
The joke
Your head
>>31506151
>not surgically lubing your BCG to the mm
casual
>>31506134
i also prefer clp
>>31506158
>Have your wife sit on it?
>>31506080
A trigger that was meticulously built
>>31506153
TI-7
>>31506153
B5 Enhanced and LMT sopmod are basically the same. B5 Bravo is a skinny faggot with no storage
>>31506142
no
>>31506155
no
yes
it might discolor
don't rub it on anything when it's hot
>>31506165
put the muzzle deep into your mouth so you can't possibly miss that one
>>31506155
use high temp grill paint and clean the barrel well before hand. it might not hold up to dings and scratches but will hold up to the heat
>>31506128
I'm so happy I got a BCM BCG.
How do you like the Geissele handguard?
>>31506176
not surprised you only post grills the same age as you
>>31506218
i think i could run it over with a tank it would probably be fine
>>31506187
WHy the fuck didn't I get an FDE scope mount? Fuck I am dumb.
Oh well.
>>31506218
>I'm so happy I got a BCM BCG.
why would anyone be happy that they bought a mil-spec BCG that cost twice as much as any other mil-spec BCG
>inb4 muh quality control
BCM does the same exact shit that other manufacturers do
>>31506176
Cool cheel cosplay
>>31506205
Is that anything like engine enamel?
>>31506236
cant help they are so darn cute
>>31506158
Literally hit it with a hammer 3 times and torqued it down
>>31506194
No
>>31506271
reported to criminal-ceos
>>31506272
this is why you don't cheap out on even the smallest parts you fucking punce
>>31506094
>>31506151
right? that bcg has more moving parts than some full rifles and if it needs lubed in 15 different places i'd just spray the whole thing
>he doesn't throw his receivers down the driveway for that bringback look
>>31506297
>he doesn't want a factory fresh A1
kys
>>31506295
It was the metal crush washer from D60
Quick question, would an AR with a standard thickness barrel be able to support the use of a sword bayonet? I want to make a gift for a friend and knowing him he'll probably use it heavily.
>>31506291
gramps pls
top cute coming through
>>31506297
>he doesn't use his guns
>>31506140
mobil 1 you dumb fucking nigger
>>31506328
>sword bayonet
>he'll probably use it heavily.
>>31506329
enjoy federal pound you in the ass prison my man
>>31506324
that's some fucking gay bullshit
was it shiny black?
i had one that wouldn't crush
i did the logical thing and didn't use it
>>31506269
i truthfully dont know, ive never used the engine paint before.
Has whatdickwhatcock asked us for rail advice this thread yet?
>>31506140
>motor oil shills
>not using motor oil
>paying 100x for lower quality lubricant
>>31506365
Yeah kinda like that.
I'm probably gonna order a rubber one anyways
>>31506368
No.
And neither has MPX-guy shown up asking in what situation an MPX is better than a wet fart in white shorts.
>>31506368
idk
he forgets my answers to his questions so i just ignore him now
>>31506381
a rubber what
FDE a poop
>>31506405
Washer. The one on my m&pee is rubber I think
>>31506401
this guy gets it
>>31506414
Pistol done, needs paint. Only thing I'm planning on upgrading is the irons, trigger and muzzle device.
>>31506425
what the fuck
what kind of retarded shit is that
>>31506433
I dunno, I didn't design it
>>31506425
Doubt that it's rubber bud
>>31506425
that wouldn't be good
>>31506344
He likes large blades and guns I think combining his interests would be a nice gesture. I think it will weigh about 2-3 pounds. Would making a trench knife style handgaurd be too gauche?
>>31506414
>>31506426
keo
>>31506425
????????????????????????????????
>>31506445
>>31506447
>>31506457
It's been like a million years so I could be wrong
But p sure it's flubber
Lemme chek
What VFG are you gaymosexuals using? why do you like it?
>>31506469
Does it smoke when you shoot it?
..oh wait
>>31506452
is that ebonics
In for home :)
>>31506471
>What VFG are you gaymosexuals using?
Magpul AFG.
>why do you like it?
I didn't expect to like it. It was just going to be a placeholder for a BCM stubby VFG, but the AFG does a great job for my big fucking hands.
why is the mro such a goofy-looking optic?
pretty much down to either a strike eagle or an mro.
>>31506471
AFG is best VFG
>>31506487
you tell me mr detroit '>'
>>31506499
or you could get a good optic, like the accupower im selling
New basic bitch AR
>>31506499
MRO is comfy.
>>31506523
My side charger is better
>>31506499
vortex is dumb
>>31506513
how much?
tell me some retarded shit like $700 plus my buis
>>31506532
At least he has a full gun you poverty ridden nigger.
>>31506471
>BCM stubby
Super comfy and available in mlok
>Troy convertible
Adds additional weight to the muzzle, can be either stubby or fullsize, stores 1-3 CR123's, and will literally bend the barrel before coming off
>milspec grip-pod
It's a grip. It's a bipod. It's fairly comfy. It triggers people. Makes a satisfying WHACk when deployed.
>>31506532
shut up fag
>>31506537
put your trip back on
>>31506539
>>31506512
fix that gangsta lean 3P and I will
>>31506538
4u $550
>>31506523
i actually dont hate that.
speaking of holosuns, their chevron reticle has me interested.
>>31506532
His actually fires.
So no.
>>31506532
So where's your forward assist, then? :^)
I will admit, yours is aesthetic as fuck, and having it on the left side is a plus.
>>31506532
>>31506523
Left side charging handle >>>>>> right side
unless you're a lefty
>>31506558
shit rifle. also, sights optic? nevermind, you aren't even going to shoot that abortion
>>31506561
>>31506405
what barrel length?
>>31506539
See pic
>>31506550
It was light bantz ;_;
>>31506570
Kys
>>31506573
I do wish it had a FA, I agree
>>31506580
They make one that has the CH on the right too
>>31506591
buy my accupower, it would be great on your pistol
>>31506523
What upper is that?
>>31506561
>$550
mount or nah? also 1-4 or 1-6?
>guy on armslist selling black SF Warden for $180
>meeting tomorrow at 1300hrs
I don't even know if I wanna use it or if I'll just throw it on ebay to turn a 300% profit.
>>31506532
no one made fun of my build :(
(you)s plz
>>31506608
no mount, 1-4x
550 shipped
>>31506610
smart
>>31506583
Waiting on stuff to arrive
>>31506617
Kys
>>31506623
GAAAAAY
>>31506610
>ebay to turn a 300% profit.
Do that. There will be more, and even if there aren't who cares just get a suppressor.
>>31506580
Left side is marginally easier to use, but it being non-reciprocating means you lose the utility of having a built-in forward assist.
Also, it's fun as hell to charge the thing like an AK, and let's be honest, the entire reason I bought it is to have fun.
>>31506606
Bear Creek Arsenal side charger. Comes with a BCG for $220 shipped. I've heard mixed reviews about BCA but so far it's worked without a hitch.
>>31506167
You are right about that
>>31506623
>10.5
fag
>>31506604
looks like anon wants it
>>31506641
It's not bad anon
>>31506641
Mine is non reciprocating fortunately
>>31506623
>blaster guts
terrible name.
also if youre going to spend $150 on a bcg, atleast get a brand name or nitrided.
>>31506652
rather sell it to someone already doxxed
>>31506636
>>31506610
What's up with the retarded ebay prices?
>>31506636
My SFMB is on my 18" SPR, it's pretty light on concussion as is because it's an 18" rifle-gas gun.
>>31506663
kek
1-4 would be kinda dump on a pistol tho
>>31506626
pics? and which reticle?
email me if you want. i was considering the trij 1-4 but combining a good mount would have put me over budget.
asinineturpentine@gmail
>>31506655
Tbh I dont think theres a huge difference between non reciprocating, and reciprocating. Theoretically one that moves with the bolt can catch on things and hit you, but people have been using AKs with reciprocating charging handles for decades without much complaint. It really does seem like 90% personal preference, neither is objectively better than the other.
>>31506667
>Surefire goes on humongous marketing campaing about The Next Greatest Thing
>proceeds to make all of 20 of them
Demand far outweighs supply atm.
>>31506696
I just feel that on a modern gun rifle, there should be any of that going on. It's not the biggest deal
Though I do really wish I had a fa
>>31506659
agree awful name
>nitride
no need for a meme bcg. parked is gtg. muh 158 MPI HPT
Is my red dot one notch too far forward??
>>31506494
was it you or Milsurpdude who was saying that pics of an M16a1 with a 3 prong flash hider couldnt be found?
>>31506687
ppl seem to do it a lot
>>31506695
sent. its the .223/5.56 BDC reticle
>>31506746
you got me on the t2 train. i could just buy a pa micro but that'd be gay af
>>31506497
>>31506500
>>31506541
You fagbois are alright sometimes. AFG just isn't comfy for me, VFG keeps my hand a bit more consistent in placement, let's me pull my rifle into my shoulder a bit more, and just positions my thumb for my light better. Appreciate the opinions either way.
>>31506763
yeah dont do that
>>31506740
>is it where you want it?
>does it touch your handguard?
>>31506777
who are you quoting?
>>31506610
>>31506202
I'm thinking Friday or Monday
>>31506789
Your autism.
>>31506793
KEK
>>31506793
top kek.
>sells it to a nigerian
>>31506793
rekt
>>31506793
lmao
>>31506795
I'll let ya know as soon as marky tells me
>>31506793
Meh
Would save me nearly an hour drive if he backs out.
>>31506772
i feel the same way, i wanted to like the afg bc i hold it thumb break anyway but it just felt awkward for me.
>>31506793
lmao. send him this.
>>31506799
learn how and when to greentext
>>31506772
AFGs a poop
>>31506821
What the fuck? They're not discontinued or in grey legal standing, just in between runs what kind of impatient manchild would pay over 400% MSRP.
>>31506716
Fug. Got mine for 80 bucks. Maybe I'll have to throw it up there
>>31506777
Ah that was the golden rule I was trying to remember. Yeah since it's not on the rail it's fine for me
>>31506867
really impatient people with disposable income. $500 is nothing for some people.
>>31506867
The very impatient ones
>>31506523
I like your taste
Hello
I may be a little drunk
You know how the locking lugs on AR bolts are known to shear?
Why not put an angle on the back end? Wouldn't that increase its shear strength?
>>31506922
No ur dum
Git
>>31506922
>locking lugs
>known to shear
wat
http://www.gunbroker.com/item/587963592
Every day we stray farther from God's light
>>31506922
Your drunkenness shows. How would the lugs lock up into the barrel extension with angles stopping it from turning?
>>31506922
Are you sure you're not drunk, and retarded?
>>31506936
>http://www.gunbroker.com/item/587963592
y tho
>>31506922
thicc bolts
>>31506972
I want another Noveske lower to match my other, but I don't 230 dollhairs want it, nomsayin
>>31506988
No I feel you, I was talkin why it was going for that much
>>31506995
Noveske has been focusing on their N6 .308 rifles and new faggy bolt actions that no one asked for. For whatever reason their lowers are getting hard to come by
>>31506939
Obviously you'd mirror the shape of the lugs in the barrel extension.
I'm not the only one with this idea it seems
>>31507041
Do you think a slanted surface would resist force better than a flat one?
I don't
>>31506985
so thicc
>>31507022
does noveske even make gen 1 lowers anymore? i thought they were onto selling billet gen3s now
>>31506642
Did you get that out of a tac pack also?
Should I go ahead and get a red dot for meyou pistol, or grab a rear iron for my rifle?
>>31507057
w-would it still work?
>>31507074
Take a wild guess
>>31507057
>What happened to this bolt?
giddy probably
>>31507074
If it had at least 2 lugs left, yes.
But it has part of one, so no.
>>31507057
>sharps relia-bolt
>>31507069
Yeah after two months I canceled tho
>>31507069
repaint pistol a solid color
>>31506523
I really like that charging handle, something about it just fits.
>>31506094
ARs are gay, why don't you get a non-entry level gun?
>>31506428
How do you like that rail? How is the build quality? Does it feel like it is attached well?
>>31506405
>Cobra buckle on sling
I like your rifle qb
Wait till you see my next build.
>>31506151
I know this is 2016 but the book issued with the M-16 just says to use oil. And if it's going to be used in the Arctic....lighter oil
>>31507135
I just cancelled mine last month. Finally got tired of feeling like I was wasting money.
>>31507143
The whole dang thing? Should I do krylon OD or brown?
>>31507166
like what
>>31507062
I haven't heard otherwise. They still have complete rifles on their website like use the gen 1.
>>31507217
brown
sweet christ
>>31504802
>>31507277
That green text. Holy crap.
Crap is also the color my gun would be, I fear. Would I need to do a base coat of a lighter color first?
>>31506867
you're just not cool until you have one
>>31507277
i want to believe this is a work of fiction
>>31507277
>brings tanerite to indoor range
>>31507277
>anything you can hang up
>automatically assumes explosives are g2g
>>31507362
i'd like to believe its just for you's but people really are retarded.
warden comes tomorrow.
>>31507435
>>31507362
Everyone is buying SFMB's and Wardens.
How long before Geiselle rails, DD rails and Wardens are literal memes? I want off this ride.
>>31507459
>DD rails
>>31507459
i mean, what did you expect when people recommend the same stuff day in and day out
>>31507459
literally everything is a meme already.
might as well lean into it.
>>31506744
Back then, they used up old production parts, ya have to remember, they couldn't make those things fast enough, they didn't waste anything, so if some old production ended up on a newer model, no biggie.
>>31507500
geissele bayonet mounts are the next hot item if they actually sell them
>>31507476
'>'
>>31507491
Not sure what to expect really. Stolen valor and ACOGs became memes almost instantly, yet Surefire or the RIS hasn't succumbed to it.
>>31507500
I'd rather not.
>>31507518
This.
I'm buying at least 3.
>>31507459
Meme are all we can aspire to be
>>31507518
>ddc bayo mounts
muh dikk
wow.
sfmb and warden. urx 4 and acog. snickers sling in the mail. pb has a ddc geissele charging handle for me. also found 2 larue mbts for sale locally
how many more meme items can i get
>>31507527
I thought that one would go a lot higher. If people want to buy KAC, DD, SF and geissele shit all day thats fine with me. better than a bunch of poverty builds shitting up the board
>>31507536
Meanwhile, this faggot is making cash on idiots.
http://www.ebay.com/itm/Daniel-Defense-MK18-RIS-II-Rail-9-5-burnt-bronze-FDE-Flat-dark-earth-cerakote/262649325743?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D39241%26meid%3Dd3e21a712bc34fbc929d9eb965711b51%26pid%3D100011%26rk%3D2%26rkt%3D18%26sd%3D191979409772
>>31507549
It's kinda a big deal
>msrp 399 dollars
And I'll still buy it
>>31507557
oh, and a stolen valor
>>31507459
they already are brochacho
>>31507476
What the fuck...
>>31507566
Jesus Christ that color looks like Uncle Bill's doo doo brown or DDC. Fucking normies buying up all the mk18 rails
>>31507560
>shitting up the board
i needed a good laugh
>>31507569
FUG I DIDN'T KNOW IT WAS REAL
WHAT A TIME TO BE ALIVE BOYS
>>31507566
what is he fucking retarded?
the people crazy enough to pay over msrp for one of those are the people autistic enough to need the real thing
i'll be surprised if he sells at that price
>>31507575
When that shit is on the BST thread on /k/ I'll believe it.
>>31507557
Meme Lancers.
>>31507560
Slipped through the cracks of the clammy NEEThands of ARFCOM.
I don't mind quality builds, but when everyone has the same shit it kinda makes for lackluster conversation.
>>31507598
>>31507609
>2 days left
Just wait, it's gonna get spoopy.
>>31507604
(Bass drops)
>>31507611
you realize that's not an auction right?
>>31507611
such is the reality of the hivemind
>>31507069
You actually shoot/use that thing that much or just drag it behind the truck for a while?
MAC did a torture test on the M&P 9, and it shit the bed. What do I carry now? An Internet guy invalidated my purchase
>>31507616
>>31507625
I do now.
>>31507657
>he doesn't drag his rifle behind a pickup for reliability testing
Fucking pleb.
>>31507657
>scratches behind the shell deflector
I'm gonna go with dragged behind the truck
>>31507657
The painting? No I found it in my apartment after I moved in.
>>31507668
Unless you plan on torturing your M&P9, just carry the M&P9.
Also buy a new gun anyways, I know that's the real reason why you asked
>>31507678
>implying you don't want to have 4 pounds on the end of your rifle
>>31507668
glock brand glock
>>31507700
I already do, and it's significantly more useful.
>>31507668
a VP9 because MAC is a gay hobo and can fuck off
>>31507723
sorry senpai, some faggot on the internet said your gun cant get get wet.
also you cant baseball pitch it at steel, so don't do that
>>31507686
>>31507657
In all seriousness, i've shot it quite a bit, but that's just leftover bits of paint from when I stripped it. Pic is old paint job.
>>31507699
Part of my morning routine is filling it with sand, though.
>>31507708
But everyone has that. I need to be cool.
>>31507747
i know what it takes to get my gun to fail
and how much it will work up until that point
>also you cant baseball pitch it at steel, so don't do that
i did stomp on it in the snow
it took that well enough
Thoughts?
>>31507783
I'm honestly about 1000-1200 rounds in on this M&P with with no failures aside from limp wristing from noguns friends. Even the one Promag I own has never given me issues.
I think the FDE makes it more reliable.
>>31507783
REEEEEE
don't you know the true test of handgun reliability is how many time you can throw it at ar500?
lrn2opr8 jesus
>>31507826
>I think the FDE makes it more reliable.
probably
that's why i painted it
did i do gud
>>31507819
the rifle on a midlength is kinda weird. Also, the PSA CHF barreled uppers and rifle kits usually dont run very much more.
>>31506189
What would you even store in it anyway? The only storage I ever saw that I liked was the Larue stock with the cleaning rod in it.
>>31507863
dank buds
>>31507839
I didn't realize that was paint till you said that. What brand? It looks close to HK's FDE.
Man, that blem sale got everyone rockin the DDC MK8 now.
>>31507851
>random cheap non-matching stock
>rail segment on bottom of keymod handguard with nothing on it
>A2 grip
>milspec trigger, FA, and charging handle
>no sights, no optic
You did alright, could've done better
I ordered another 500 rounds of WG instead of a TD grip. And I think my next purchase will be more 9mm. Fucking election, keeping me from getting new accessories.
>>31507851
Looks good to me.
Blem 9.5" rail is on the right. No real blemishes on it that I could find and the color is close to the other. Looking forward to building my pistol.
>>31507873
>What brand?
whatever
i forgot
Just did my first 80% lower.
How'd I do?
definitely want to clean up some corners
>>31507885
could just not shoot for a while
>>31507863
Spare earplugs for your retard friend that forgets his
Lens wipes for your optic
Dummy rounds that seemingly every magpul product comes with
3-piece cleaning rod for cleaning or clearing stuck cases
Spare batteries for your optic/light
I keep a hex key that fits my optic/light mount in my grip but that's normally about it since all but one of my rifles has non-battery-powered optics.
>>31507907
Also do I need to put a serial number on it?
I'm in Montana
>>31507919
Now get one of those retarded uppers that has slanted slots milled through it and you're golden.
>>31507928
What makes it retarded?
It's not like i'm going into combat with it
>>31507911
Who do you think I am? You?
>>31507892
unblemished blem? can't go wrong.
why do no rails come in OD Green
>>31507936
no i have plenty of ammo
Are all LPKs pretty much the same besides the trigger group? Should I just get the cheapest one?
>>31507902
I see. Thanks
>>31507907
>>31507919
but will it pass the mud test?
>>31507491
What do they store in those things?
>>31507957
Fuck no, I just wanted to make a super light ar15
>>31507946
more or less. IMO, Stag makes a decent LPK, but everything else they do is shit.
>>31507957
dude the mud will just fall right through it
it's genius
Also what's the difference between m2 and m3 pmag?
Military Classic vs Polyformance?
>>31507944
So will I soon enough.
>>31507981
somebody call the DoD, our boys need this new tech
>>31507986
whoa hey is this some fucked up hentai shit
>>31507997
Probably, I think it's on-going.
So is there any real difference in terms of reliability between Gen M2 and Gen M3 Magpul mags?
Or is it all a matter of comparability for a few extra rifles? Because I'm already going to have 20 M2's and 20 PSA GI mags, the latter in the event I decide to go full retard and buy a SCAR 16 or HK416 or something.
>>31507984
>>31508139 here
Basically the majority is just that the M3 mags allow you to be compatible with other STANAG compliant rifles, like the SCAR, SA80, HK416, etc. Like the old EMAG used to do.
As for any extra improvements that increase reliable feeding in a regular AR-15 platform, I'm not too sure.
>>31508139
In an AR, yes.
Gen2 is more reliable than gen3 *in an AR* at the cost of not fitting some other STANAG-based rifles, and not having the dot-matrix for numbering (who fucking cares).
>main difference is you can't over-insert a gen2 as easily
>the difference is minor and you'll do well with either
>>31508139
Regarding ARs, there won't be any real difference in reliability.
>>31507518
apparently someone already emailed them about it and they have no plans of fielding them.....feels bad man
>>31508367
>>31507277
>sets off a 6-pack of tannerite in an indoor range
ABSOLUTE MADMAN
>>31507277
>creates tannerite bomb
>lets that muther fucker rip in an indoor range
the hero we deserve
First time build today and i ran into a problem with the piece that holds the safety selector when i insert the spring that holds the detent for the safety selector the safety selector no longer moves is the spring to tight? Should i shorten it?
>>31508663
Take it out and oil it and move everything around a couple times, id be amazed if that didn't fix it
>>31508367
R u fukin srs
Do they hate money?
>>31508532
Where is gas bloc?
>>31507907
coolio
>>31507919
>I'm in Montana
What part of it, mate? I'm central-west-ish.
Also please post pics of the fully assembled skelliegun.
I hate all of you
Okay so what's the deal with pmags and hexmags? I have no idea why so many people run them. I'm sure there's a reason and I'm probably just retarded but I'm stumped.
>>31509393
Pmags are light, reliable and quiet.
Hexmags a shit.
How good are the ta-31s? I'm thinking a ought picking one up its the red chevron
>>31509839
Awesome clarity and field of view if you don't mid the short eye relief
>>31509866
It will be going on a 16 mid, what is a good mount for it?
>>31509875
GDI, Geissele, Bobro, Stock Trijicon, LaRue
>>31509884
Seems like the stock ones would come loose
>>31509900
Put blue or purple loctite on the threads and torque it to spec. More than 99% of the military's acogs are on stock mounts with no issue.
>>31509917
That's tyre, but I feel like paying 130 wouldn't be so bad considering how much of a pain the the fucking ass it would be
>>31509927
It may be worth it to you to pay extra if you want QD.
That said, the stock mount is just a set it and forget it type thing.
>>31509927
wtf is tyre
>>31509947
true*
also a city
>>31506922
No, at most you'd want to increase the cut radius in the corner to reduce stress concentration from bending (not shearing).
As it is he bolt is designed to last many thousands of rounds so it isn't really a problem that needs fixing.
t. Mech. Eng. student.
>>31506922
KAC rounds the bolt lugs, pretty snakeoil if u ask me
>>31509393
Pmags are reliable, lightweight, and CHEAP
Hexmags are meme mags
>>31507958
batteries
>>31510065
>pretty snakeoil if u ask me
are you an engineer?
no, you're just an anon who doesn't know shit.
>>31510238
>fighting my opinions
>>31510244
i'm not fighting, i'm dismissing.
>>31510287
did you paint your lower yet, fanboy?
>>31510290
what lower?
>>31510319
the kac
also, you have an ACOG right? which model do you have?
>>31510334
The kind he managed to break and had to send in for non warranty repair.
>>31510388
lol
I'm thinking about picking up an ACOG instead of a t-2 now, but haven't decided
I got a line on a ta-31 (red chev) for around $1000
>>31509839
>>31509875
>>31510334
TA31 a best
Hahahaha a fucking bee
>completely rekt
pissing contests aside, should i spend the money to actually SWITCH from pig disgusting 16 inch carbine gas and button rifling to grorious chf with mid gas? is it worth the loss of neetbux?
>>31510452
That's up to you.
I'm torn between switching out my 16" middy for a 14.5 pinned and welded. Personally I prefer middy, but if it's not worth it to you then it's not worth it. If you'd be that much happier with your AR with a middy, then do it.
>>31506117
In what? A wheelchair, perhaps, you handicapped fuck?
>>31510467
how does he deliver pizzas if hes crippled?
>>31510479
His wheelchair is his delivery vehicle.
>>31507879
>implying there is anything wrong with the A2 grip or the FA
you're pushing the wrong buttons normie
>>31510515
The A2 grip sucks. I also swapped out my FA for a V7 FA.
>>31510479
i get a lot of tips due to my disability
>>31507877
sell me the arsenal CR
>ammo out for delivery
weeeee
>>31510637
GRAB PUPPER
whats up with all these new tripfags
also
should I buy a carrier and some armor? it seems hilariously unnecessary
>>31510745
>whats up with all these new tripfags
idk
i wish they would off themselves
none of them own anything of value
>>31510764
Literally who r u
>>31510768
still alive
>>31510776
Is he buried next to dr8c0s dead girlfriend(s)?
>>31510783
how many underage girls has dr8c0 raped and murdered now?
Anyone know how well Magpul's FDE matches with Midwest industries's handguards?
>>31510801
3 confirmed
>>31506131
In with more fittings
>>31510816
>matching FDE in 2016
get with the times
>>31510741
new puppers:^
>>31510837
i can't wait until trump executes him
i'm so sick of hearing about illegal aliens raping and murdering and getting away with it
>>31510849
>>31510816
Ah fuck I meant OD, not FDE
Either way, I know it won't match perfectly, I just don't want it to look like dogshit
>>31510854
so what are you going to do?
the old sack in a river?
bag on a freeway?
you could cut a hole in a box and use car exhaust
>>31510868
Honestly, I like different shades. I think straight up matching shades of FDE and OD look like shit.
>>31510854
aww they are like little chubby wet rats
>>31510875
I don't mind it if they're pretty close, but too far apart and it just looks cheap.
To each their own, I guess
>>31510874
sell them for $500 each
>>31510879
smell like ass tho
>>31510854
Looks like the rats I feed to my pythons, pls take better pics for a r8
>>31510861
BUILD
>>31507919
you only need a serial if you ever sell it, I think
>>31510908
Tbhfam giddys rifle is better but only because of the quad rail.
Are anderson arms ARs worth a shit or should you just stick to the more known rifles in that price range?
Anyone ever use PMC X-tac? PSA has it on sale for 7.49/20 and free shipping over 10 boxes.
Looks like it's just green tip stuff.
>>31510585
Nah, she runs like an AK should and I am already attached.