QTDDTOT

Are you actually retarded? Don't use grease on your guns and how did you manage to make grease go bad? Just use gun oil.

>>31028426
i use lubriplate grease on my triggers and inner bolts and royal purple gun oil on everything else.

>>31028426
I only use grease on aluminum frame handguns and then any white lithium grease is fine. I actually use the same spray can stuff as I use on my motorcycle drive chain.

CLP is all you need

anyone knows knife legislation for slovenia? i can't find shit.

>>31028426
I know dick about gun grease, always used hoppes lube. But it tends to run and ends up at the bottom of my gun/safe. Is grease a better option? If so what are some good recommendations? I'm told frog lube is good but I don't feel like heating up my gun everytime I service it.

>>31028773
You don't need it.
I just use a tiny bit on contact points for the rails on my pistols

>mil tech

>$15 a oz

>is extremely lightweight teflon paste


wew

>>31028426

This stuff is awesome, doesn't run when you apply it and stays where you put it. I use both, this and clp.

>>31028750
i even tried searching in fucking slovenian no luck
>slovenski nož zakon

Does anyone just use oil on there weapons?

I recently purchased a helmet for WWII reenacting and sent it off for some refurbishment
apparently, I had a Vietnam liner (all I was looking for was the front seem, didn't consider the liner)
now I need to find a WWII (or at least wartime style postwar) liner

how much should I pay?
where besides eBay is good to look for a deal?

>>31028426
it literally doesn't matter
use cooking oil, motor oil, whatever

File: slip2000-grease-16oz.jpg (723KB, 1000x1000px) Image search: [Google]

723KB, 1000x1000px

>>31028426

Liked the EWL and later the EWL30, so I tried this out before I left for Korea. Pulled my guns out of my Dad's safe a year later with no rust or degradation of the grease. Took them to the range and they all worked flawlessly.

>I don't even remember what I paid for it, but I had a coupon code.

>>31028773

A thicker oil-based lube shouldn't run much, if at all. Hoppes is pretty thin stuff. M-Pro 7 is pretty common at various retailers (not the solvent, the CLP) and works fine. Don't overlube the gun. Not because you're going to hurt anything (you won't), but because it's unnecessary and, as you've found out, it runs all over the place.

Back when I was shooting a SIG I used TW-25B for grease, but there was a dude on AR15.com selling sample packets of it for dirt cheap. No way I'd pay whatever it is they ask for a tub of it.

>>31028773
It works a little better on the rails than oil since it has less of a tendency to work it's way down to one end of the rail while the slide is moving. That's a bit of hair splitting though. I've heard of everything from Mobil 1 to hoppes being used for years with success. Just keep your gun lightly lubed around points of metal on metal contact and you'll be fine.

For people saying never use gun grease. Some guns like the m1 Garand actually require it.

>>31029000
>>31029077
I think I'm over lubing my guns

What would happen if you shoulder an AR pistol using the buffer tube as a stock?

Clearly it'd be uncomfortable as fuck, but would it work? Would the ATF shoot your dog?

Will +p ammo work in a late 80s p226 without blowing up the gun

File: 133862.jpg (45KB, 880x660px) Image search: [Google]

45KB, 880x660px

this is what i use

Wait, you guys clean your guns? I thought that was a meme...

>>31030420
gr8 b8 m8 i r8 it 8/8 no h8, just f8.

>>31028426
I use that shit on my p226 and it's excellent.


And uhh.. Grease doesn't go bad

>>31028586
>Don't use grease

Don't listen to him. Most guns are better with oil, but many people prefer grease on precision bolt guns and for long term storage.
Generic lithium grease designed for high pressures work fine and last forever. I use Motomaster because it is cheap as hell.

>>31029748
The gun should cycle. You'd just look weird.

Just shoot it like any rifle with a folded stock.

>>31029748
at least put some padding on the tube, should be fine unless atf has cameras around you.

File: desktop.jpg (102KB, 640x480px) Image search: [Google]

102KB, 640x480px

>>31030438
FINE FAGGOT, I CLEAN MY GUNS!

Alright, I use the REM oil cleaner lubricant protectant all in one aersol cans. I spray liberally, whilst avoiding any optics on the gun and minimizing over spray on the plastic shits. I spray all metal down completely. I use an old T-shirt for all the carbon deposits that aren't too tough to remove. Then after spraying through the barrel I pull a correct sized boresnake through from chamber to crown/brake several times. I use a white piece of paper to reflect light into the barrel and examine. To ensure there isn't enough lead/copper built up to cause problems. I use a metal softer than the gun brush to remove any carbon build up that is too tough for T-shirt/pressurized REM spray to remove. Then I spray it all down with more REM spray and put away. I'll even spray some REM oil into my ammo boxes because I don't shoot enough to cycle rounds frequently and I have a swamp cooler.

ARE YOU FUCKING HAPPY!?

whats a good set up for pistol sights?

right now I'm heavily leaning towards a fiber optic front but I have no idea what's best for the rear

File: 20160818_201341.jpg (3MB, 4128x2322px) Image search: [Google]

3MB, 4128x2322px

Do y'all 2gun?
Pic related - it's my usual setup but haven't been in awhile. I'm going saturday.

>>31030832
No, but I would love to try it.

how much does an event cost? Would a revolver work for it? what would be the most basic equipment required? Any good literature to start?

>>31030695
probably something adjustable or a micro dot.

>>31030832
I'd like to get into it, or some other competitive shooting. I was thinking IDPA but now that I'm getting closer to completion on my AR it'd be neat to do something like 2-gun if the local gun club has it

File: image.jpg (1MB, 2448x2202px) Image search: [Google]

1MB, 2448x2202px

>>31028426

>>31030443
Mine turned into a watery consistency. Maybe it just separated or something. But I wasn't willing to hope shaking it up would fix i

File: GOPR0540.webm (3MB, 750x422px) Image search: [Google]

3MB, 750x422px

>>31030832
I 3 gun with my VZ. I would prefer to just shoot rifle and pistol though.

>>31030865
I live in SC. The event costs exactly $12 dollars. You need a rifle, pistol with holster, ears, eyes, and a chamber flag. They'll sell you the flag for a dollar, or even give you one if you're new.
You need at least 2 mags for both pistol and rifle, as they usually build in one necessary mag change. The first rifle mag is almost always limited to 10 rounds, so if the stage calls for 12-15 rounds you gotta change mags once.
>revolver
I really don't know. In general it seems that as long as you are cool with handicapping yourself with an unusual gun and are just as safe with it, it's cool. A revolver would be a pretty severe handicap due to the stages being set up for ~10-20 rounds. But if you're okay with that, they'd be more than happy to let you do it. I've seen lever actions used before, and I actually ran one time with a hungarian m38 mosin. It was lots of fun, and I was fine with not actually competing timewise with everyone.
They are damn serious about safety, and I wouldn't go if they weren't. While you're running the stage you're followed by a safety officer who is watching for you to do any kind of dumb shit, at which point you are stopped, corrected, and/or dq'd or kicked out depending on what you did.
TL;DR it's fun, you can probably run any gun that's safe, and if they don't take safety seriously wherever you go, turn right around and leave.

>>31030934
OH GOD, WHY IS THERE SO MANY RELOADS?!

>>31028426
Lubriplate SFL-0

>>31030934
>dat paintjob
I dig it my man.
FWIW at my local range they ask us to reload barrel towards the ground. Not straight down but lower than level. They don't want the first round flying high. Looks like you're shootin in a less populated area, but just food for thought.

>>31030971
He's canadian

What are decent budget options for full sized, DA/SA, metal frame, manual thumb safety pistols?

>>31030956
Thank you for the information.

So with two gun, the average of pistol target shots are 12-15? Muh revolver holds 7 and a single reload shouldn't be too much so long as I compensate with quick firing and not missing. Or if I man up and moonclip I could probably only lose 1/3 a second over a magazine pistol if they're forced to do a single reload as well.

>>31028426
I use RIG grease. First bottle is going on 6 years and still half full.

>>31028930
I use full synetheic on my ak and Canik

>>31031035
Sure man, go for it. I like being a little different, for the first three years I did 2gun I ran an sks with strippers. I could definitely charge the sks faster than some.

>>31031000
I see the potential for letting a round fly over the berm. But no one has called me out, and its a more effective combat reload. My number one problem is turning around with the muzzle up. its safe but RO's don't like it.

>>31031026
Define "budget"

>>31031079
5 bills or lower?

I cleaned my 10/22 for the first time today and noticed tiny amounts of rust on the outside of the stainless steel barrel. You can hardly see it unless you look at it from the right angle, but it's in a few places. Is this something I should worry about? What do I do to get rid of it or stop it from getting worse?

>>31031077
Hmm. Our stages are designed where you really shouldn't have to turn more than 180 degrees, if you have to back up you do it facing forward. I hear you on the muzzle up thing but our RO's would call someone on that too. I've been in the crowd when a dude muzzle swept the whole crew trying to change position. We didn't take kindly to it. Even if your muzzle is up it would make folks nervous to see your face while you're still running the course.

>>31031091
You "might" be able to find one of the old Smith & Wessons if you're lucky, but I don't know too many besides that for that cheap, at least in those parameters. Maybe you could find a used Beretta 92/M9 within that price range too, but it's tough to find a metal-frame option with those features within that price point from what I can tell.

Any driving reason towards the DA/SA or the thumb safety? You really don't need one if you have the other

File: 20160727_203648.jpg (473KB, 1920x1080px) Image search: [Google]

473KB, 1920x1080px

>>31029748
>>31030474
>>31030474
Shouldering a pistol IS NOT ILLEGAL for the last goddamned time you autists

>>31031101
0000 steel wool to get rid of it, then to prevent more all you can really do is oil it unless you go full Russian and cosmoline it, but I doubt you're going for deep storage.

From how you're describing it, at this stage it's probably only miniscule surface rust, in which case you have nothing to worry about. You just want to prevent pitting, and even then, the inside of the barrel is what you're really worried about; outside is more cosmetic unless you let it get horrific.

>>31028426
That's probably the best goddamn gun grease ever created, anon.

>>31031181
Then what was all the hub-bub about the sig brace?

File: Screenshot from 2016-06-29 23:33:05.png (548KB, 800x649px) Image search: [Google]

548KB, 800x649px

>>31028426
>and now it's gone bad

You are literally retarded, anon. TW25B has an endless shelf life. Just work it around in the tube before using if you really OCD over it. Once applied, it keeps its consistency.

Jesus christ...

>it's gone bad

...just reading that makes me want to beat you to death with a hammer so as to prevent your genes from polluting any future generation.

File: 1457911288662.png (225KB, 512x384px) Image search: [Google]

225KB, 512x384px

>>31031199
It wqs NOTHING. It was autistic fucking idiots obsessing over an ATF opinion letter (which is not a law) that if you can read at a 4th grade level confirmed that you can shoulder a brace or a pistol, or shoot it any way you want; only that you cannot manufacture a firearm with a barrel length under '16 with the INTENTION to shoulder it.
No one will EVER EVER EVER EVER be prosecuted for a law that DOES NOT EXIST

>>31028940
Anyone got an answer?
Does /k/ not reenact?

>>31030934
I wonder if a 3x or 4x magnification would help you hit those smaller targets.

is that distance closer to 75m or 50m ?

>>31031404
Not me m8, i like cheap surplus shit if i see it but i stick to obsessing over period correct firearms opposed to helmet liner. Cheers though, sounds cool.

>>31031155
Just preference. Glock and shit are nice but it's just not the same.

>>31028940
>>31031404
have no idea mang

ask in a milsurp thread, if they still have those around here

I'm coming back from deployment real soon and plan to spend fuck tons of money on gear and guns. I'm looking for a handgun that costs 8 bills or less. Preferably 9mm, all metal frame would be nice but polymer isn't a deal breaker. Capacity of 17 or more and reliable. Help me /k/ you're my only hope

>>31031717
What the fuck? You're never going to find a gun that costs less than $8.

File: 1471042981571-k.png (36KB, 360x361px) Image search: [Google]

36KB, 360x361px

>>31031945

>>31028426
Is Ballistoll a meme? I've gone into my local hardware stores and none of them have heard the word, nor knew what the hell it was. I can order it off Amazon for $9 a can, but I was wondering if it's really worth it?

File: IMG_0595.jpg (279KB, 816x649px) Image search: [Google]

279KB, 816x649px

>>31031469
I do well out to 200 with just a red dot. That stage is only 50yds, gopro's just make everything look really far away.

File: 1470493455171.png (382KB, 848x739px) Image search: [Google]

382KB, 848x739px

>>31028426
>tw25b
>crappy

>>31028426
What are you talking about, that stuff is awesome. You are probably using too much. The merest speck is all it takes for buttery-smooth pistol rails, and unless you intentionally scrub it out when you clean it stays put for a long time.

>>31031404
depends upon your group. Some groups are extra anal about the kind of underwear you have. On the other hand, I saw a civil war group once where 1/4 of the guys had nike/addidas on since they hadnt gotten the right shoes in yet.

Id say for most groups, a helmetliner isnt a big deal if youre starting out. look for repros, I know they exist.

>>31029135
You are if it runs out of your guns and into the floor of your safe.

>>31030558
Ur probably dying from the aerosolized petrol chemicals.

CLP and loctite moly paste

the moly paste sticks around forever and seems to work well but if it gets on your clothes or skin forget it, it's there forever

File: C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_1471483788100.jpg (12KB, 255x255px) Image search: [Google]

12KB, 255x255px

>>31028426
>tw-25b
>crappy
>gone bad

>>31032043
Anybody?

File: Frog.jpg (343KB, 1280x852px) Image search: [Google]

343KB, 1280x852px

>>31028426
>Reasonable, completely legitimate question
>"God, imma sound stupid for asking this, but (insert actual question here)."

That was in no way a stupid question, OP.

And frog lube, frog lube is great.

>>31031181
inb4 the ATF confiscates your house and shoots your dog.

>>31032043
Hickok45 uses the stuff exclusively. Also the German army used it in ww2 maybe ww1 too

>>31032043
Ballistol is good stuff and particularly good for use with corrosive ammo, for reasons I can't remember

You're not gonna find it in a hardware store though

Question that I really want an answer to.
Did SaigaMarine and the guys with him act in self-defense?

>>31028992
This shit right here op^^
>>31028426
I use it for all my guns, shot gun, ARs, pistols, bolt guns. Shit is awesome, I use it for all rail sections (so anything sliding back and forth) anything that twists like trigger group springs I use mpro7 gun lube. I honestly don't clean my guns at all except the barrel. Some of my guns have gone through thousands of rounds and function just fine with that grease. Even put it all over my mosin bolt shooting corrosive, only clean the barrel and the bolt doesn't have any rust except on the knob where I didn't put the grease.

is is possible to build AKs from individual parts rather than a parts kit?

File: cz01a-1.jpg (190KB, 1024x669px) Image search: [Google]

190KB, 1024x669px

cleaned my cz last night.

Couldn't get all the factory grease off w/ alcohol but I made some progress. cleaned the barrel w/ ballistol and lubed the slide and locking lugs w/ hoppe's gun oil.

Felt smooth as silk last night. This morning it's giving me a lot more resistance and feels tougher to pull in certain areas as I rack it.

What'd I do wrong? What do I do to fix it?

Strip your weapon with SImple Green, then apply FrogLube per directions. Done.

>>31030934
is this extreme casing extraction to the front and sometimes even to the left normal and desired with AK variants?
im a europoor with a sig 551 which is basically a stolen AK variant. but depending on the range setup and with the military style ten metres exctraction its either the shooter to the my right or myself who gets raped from hot casings which fucking deflect in perfect 90 degree angles back to me.

>>31036010
Sell it and buy an HK. Easiest stress free fix. Otherwise Hoppes gun oil is pure shite.

File: 1446950517964.gif (6KB, 96x85px) Image search: [Google]

6KB, 96x85px

On the sticky there is a guide for building an AR15, listing all the components you need.

Is there something similar for a 1911? Preferably 4.25" commander size.

>>31028750
Stop being Slovenian

>>31030254
I wouldn't hesitate to use it. It's only a max 10% increase in chamber pressure, so unless the gun is a hundred years old or absolute shit-tier quality, don't sweat +p ammo.

>>31031091
Used CZ 75B.

What do you do with ammunition that fails to fire?

Do you throw it in the trash? Chuck it in a bush? Bury it?

File: 3de.png (120KB, 448x454px) Image search: [Google]

120KB, 448x454px

Anyone here got their CCW in Ohio?
Just wondering what distance they have you shoot at for the range time

>>31037776
I just leave it at the range

>>31037788
In most states that is determined by the course instructor, and the instructors almost always use 7 yards.

>>31037800
Is there like a collection bin there or something? Or do you just leave it where it falls? (sorry for ignorance, I only shoot on at my brother's house.)

>>31037788
50 yards, the distance you need to be able to make an assessment and be ready to draw before the coked up nigger comes barreling at you with his kitchen knife.

>>31037788
I believe it's determined by the instructor (Ohioan here).

7-10 yards most likely. You will also have to shoot some with your non-dominant hand.

>>31037843
>You will also have to shoot some with your non-dominant hand.
Woe. I've never done that before

File: 1463067889989.jpg (110KB, 640x701px) Image search: [Google]

110KB, 640x701px

>>31037866
You've apparently decided to start the process of getting a CHL, so it's time to start practicing.

Don't sweat the basic pistol course though, I can't speak for all instructors but someone who had never touched a gun could have signed up and done fine.

>>31037866
It's not very difficult.

>>31037717
75s are ugly.

>>31038361
No u.

New to guns. How much should I be paying for boolits? I feel like my LGS is screwing me but I'm not sure.

Specifically .22lr and 7.62x54r.

>>31038608
22 should be 7-14 cents per round. Surplus 54r should be 33-55 cents per round, and new production should be 75-200 cents per round depending on the type of manufacture.

File: 1911 barrel wear.jpg (1MB, 1600x1378px) Image search: [Google]

1MB, 1600x1378px

Can anyone estimate how many bullets this 1911 barrel has fired based on the amount of wear it has from the slide?

>>31038537
Yes.

>>31028426
Red wheel bearing grease. $5 at Autozone, will probably last me years.

>>31028426
Nigger that shit is meant for HMGs. We use it on the fucking 50cal (m3p) on the oh58s. Use normal clp on your small arms. Not to mention that shit is expensive as fuck.

Source: 15J OH58 Armament repairman

>>31039193
I would say a lot.

>>31030934

Whats the point of training and going to a class like this when you can't CCW or use a firearm in self defense?

>>31028773
frog lube is good but where do you live? its not great in the winter here in the PNW, it will freeze. It melts pretty quick though, I just lay them next to the heater while I'm packing up to go shoot and its ready before i throw them in the car. the heat from firing keeps it fine as well, its more of just a storage freezing issue as my safe is in a cooler location. I've switched to just oils during the winter on guns I use most often (especially my carry)

>>31036010

Hoppes gun oil is 100% plain mineral oil.

Why do magazines use relatively weak springs? With the majority of gun issues being due to the mag not feeding right, why don't they use stiffer springs?

it would make loading more difficult but it's not like you're loading them in heat of battle at the range or anything

Does anyone know of the quality of the actual Russian AKM/47s? Whenever someone says something bad about the ak or it fails some test, people always yell about how a true Russian AK would beat any AK on the market.

I find it hard to believe that the Russian's original AK is the gold standard of them all, but I dont know.

>>31035865
I checked their site, it said that several hardware stores in my area carry it.

Is $9 a can about average, oris Amazon just trying to fuck me.

Also, I have a bunch of corrosive ammo, anything special I have to do, or just spray and wipe down?

>>31028586
>>31028586
>Don't use grease on your guns
spotted the noob

>>31039625
Literally they're Saigas

While they're better than IO, Wasrs, and century by a long shot, it's not like they're impossible to stop death machines.

It's like when your dodge truck has an issue and someone plays it up more like "hurr shoulda got a real truck like muh chevy hurr *soda sip* hurrrr"

>>31039625
It's about the original machines and presses used to make them. That's why Russian AKs are good. Egyptian AKs are also surprisingly very good because they were gifted some machines from the USSR. Chinese AKs are good because they were allowed detailed tours and specs to recreate their own machinery.

Everybody else is just kind of operating from scratch, and having to personally find it rather than have it be state funded by a world superpower. This is why wholly American made AKs tend to be trash.

>>31039610
A spring that's too strong can cause double feeds.

Anyone got ballistics for the 14.5x114mm?

File: 1462933906260.jpg (116KB, 700x466px) Image search: [Google]

116KB, 700x466px

Why does it seem like so many things are out of stock all the time?Like ammo or gun components.

What do I need to do just to get a glock 22 slide?

>>31040856
You check wolf?

Is the /k/lass photos for 2016 out yet?

>>31041158
Lone wolf? The only glock 22 slide they have is some crazy looking thing for over 1,000 dollars.

>>31041403
Ah. Would a 17 slide work?

>>31041448
I'm looking to use a 40 and 357 barrel. So I don't believe so.

I own a ruger 22/45, I have a supressor in nfa jail right now. I want to make it Hollywood quiet, I have some cci quiet ammo, which I know doesn't cycle the bolt. What do I modify on the gun to make them cycle? Clip recoil spring coils? Lighten the bolt?. Also, I've already purchased a new recoil spring to modify

Tl;dr
What do I modify to make subsonic rounds cycle bolt?

what happened to the /k/ poachers

>>31041783
*/k/ poacher hunters

File: gun oil comparison.jpg (106KB, 800x600px) Image search: [Google]

106KB, 800x600px

>>31028426

>>31028773
>I'm told frog lube
Didn't that turn out to be cooking grease or something?

>>31043367
>wow these hydrocarbons are similar to these other hydrocarbons
You can use cooking oil, olive oil, vegetable oil, motor oil, gear oil, and various other oils to lubricate guns

But, many firearm lubricants have other additives that can help preserve and lubricate better than the ones not designed with additives for firearms.

>>31043409

Mobil 1 had 300 million dollars in development behind in lubricity,additive packages, and corrosion protection, how is the $15 dollar bottle of "gun oil" the guy is filling in a small garage better?

>>31040323

the saiga's are a civilian sporting rifle hacked up and converted to AK configuration, the base rifles are made in a separate building from real russian military products, and have an entirely different quality level.

>>31043537
i also use car oil, 5 dollar quart is going to last you a lifetime unless you spill it or the container degrades

>>31028426
Hoppes

>>31037776
Give it a propet funeral

Joking aside try firing it again but if it doesn't fire still collect it and soak it in some wd40 to kill the primer and change and then throw it way

>>31038361
You shut your whore mouth!

>>31038608
Check out ammo seek to get a proper estimate on ppr. Off the top of my head i know .22lr goes for 0.05-0.13 per round and nugget food goes for .35 - 1.75 based on manufacturer.

File: blisstree-shake-weight[1].png (923KB, 1345x721px) Image search: [Google]

923KB, 1345x721px

>>31028426
It separates a little after some time sitting, give the tube a rub or a good shake.

>>31028426

Why was the Fulda Gap so damn important?

>>31044766
It was basically this geographical funnel through which the Warsaw Pact was poised to free Europe from the fetters of capitalism. The lead Soviet army corps had two officers at every level so it could split into *two* corps as soon as it cleared the Gap, reinforce themselves with units coming up from the rear, and go off in different directions.

Look at a topographical map of Germany. That'll help.

Does anyone have the picture of a guy reading a book on how to deal with dogs and it says "You're not supposed to shoot dogs"?

>>31028426
Where do I buy a cheap ak47 or rifle? Or anything Chinese made? I'm doing this because I want to express my right,

Redpill me on the VP9.

Is it worth it?

>>31045180
where do you live? people sell them for like $1,100 in california. not worth it at that price.

>>31030558
>REM oil
Gross

File: Havefuntryingtobuygunstheyburnedthemall.jpg (392KB, 646x495px) Image search: [Google]

392KB, 646x495px

Not sure if it's worth starting a thread so I came here.
I am an aussie in cucktoria looking to get into handgun shooting. It seems from what I have read that I have to start off on .22 using range guns and then after some time shoot to qualify so I can buy ONLY a .22 pistol.
After that I can move up to .38 and then after that qualify on a 9mm or .45 and then I am only then allowed to purchase any pistol I want.
It looks like I will be stuck on 22 for a while so TLDR: Is it worth even buying a .22 if my goal is to get a centrefire semi auto or should I just qualify for 9mm on a range gun and get unrestricted pistol choice?

File: P320-compact.jpg (772KB, 1200x754px) Image search: [Google]

772KB, 1200x754px

I just bought a P320 and will be picking it up in a few weeks (traveling around, else I'd get it sooner.)

Anyone have one? Opinions? Holster recommendations?

>>31028750
Stab gypsy if he try to steal mule. Dont let police see, ef policeman does see give him night with daugter.

I want an ak74 clone but they are stupid overpriced right now, parts kits are like 350 but they are missing the receiver and barrel but i found those pretty cheap as well, my question is would i just need these 3 things and put it together, and also how difficult is it to assemble?

>>31045539

not familiar with aussie gun laws, but having a 22 handgun is really nice, ammo is cheap and you can shoot it all day long, so its good practice, not to mention plinking with it is really fun

File: greaserifle.jpg (90KB, 600x450px) Image search: [Google]

90KB, 600x450px

Kroil in a little glass dropper type bottle for oiling situations.
Grease, Rifle for grease situations.
I get those little brown containers at my local surplus shop, works on everything and doesn't gum up if you don't over do it. I apply with a toothpick or a pinkie for most things.

File: outdoorhub-century-arms-c93-rifle-2015-06-10_16-40-15.jpg (249KB, 900x600px) Image search: [Google]

249KB, 900x600px

Is the c93 any good? I like the design but >Century

Does anyone know if it's legal in any country to own a tank? Or where you should look to buy one illegally. I would probably need to be a millionare to buy it but it would be pöretty fucking cool.

Would it be possible to make homemade caseless rounds?

>>31046900
It's legal in America if the cannon is disabled and you have rubber tracks.
Also I've heard of people getting Russian milsurp tanks for only 60,000.

>>31045830
go moore adavnced if you want quality

What really is a good size of area to go innawoods? I am in a farily populated area without miles and miles of parks. There is one near me that is 113 acres. Is this enough if I want to go and be alone, without any moms and kids rolling up on me and freaking out over an OC rifle?

>>31045552
I have one. It's fucking awesome. Best trigger I've ever experienced on a striker fired gun. Easy to conceal (the compact 15rd version). The 'carry' version has the compact length but the full size grip so it takes 17rd mags flush. It's easy as fuck to swap frames.

The gun comes with a decent owb holster. Otherwise just get whatever suits you best.

>>31031181
Literal neckbeard

Any other ausfags shot at the SSAA Marong Rifle Range or any other SSAA range? any good?

>>31037843
Not in Florida

File: 16398785191_8f62c7b3b2_c.jpg (144KB, 800x534px) Image search: [Google]

144KB, 800x534px

Is stippling just a meme?

>>31043409
Pull your head out of your ass.
It was coconut oil.

>>31043561
Good job correcting what you're saying is wrong, but not actually answering the question as long as you get to be cool

Is the Heritage Rough Rider worth $120 or is it a piece of shit?

File: amazon-logo_transparent.png (14KB, 580x280px) Image search: [Google]

14KB, 580x280px

What $100 gun/shooting related item(s) on amazon would you buy?

Someone gave me a gift card and I don't know what to get. I have plenty of earpro/targets/cleaning supplies/speedloaders etc.

What's some other small /k/ related shit i can purchase on amazon?

File: image.jpg (575KB, 1000x748px) Image search: [Google]

575KB, 1000x748px

Can I bubba a mosin into a reliable scout rifle? For shooting at 300 400 yards

>>31049006
I have one, it's a nice little gun. Tighten EVERY screw on it when you get it. I lost my ejector in a field because it fell off while I was shooting. Once I tighten it all down everything was fine.

>>31050401
>scout rifle
most retard concept ever thought of.

File: 319KmssxVdL.jpg (16KB, 500x328px) Image search: [Google]

16KB, 500x328px

Which of the Trijicon Glock sights are best? I was aiming for the basic green GL01 offering, but the reviews consistently brought up the downside of them being hard to see in daylight conditions.

>>31050473
This.

>>31050473
>>31050596
faggots that don't know anything about guns
go correct the record elsewhere

File: 1470780293549.png (375KB, 763x960px) Image search: [Google]

375KB, 763x960px

>>31050616
>scout rifle
>wanting to bubba a Mosin

>calling other people faggots

>>31050473
It's a pretty solid concept for a bush rifle for safari and quick/short game style hunting, like boar, and why a lot of those hunters have set ups in that vein.

Cooper just couldn't shut the fuck up about trying to shill the concept and shoe horn it into a tactical/military application though.

>>31050654
>Cooper just couldn't shut the fuck up
That was kinda one of his bigger flaws in general, man was more than a bit of a blowhard.

>>31028426
mobil 1 synthetic

10 bucks for the economy jug'o'lube at walmart, destroys hard carbon better than any purpose made solvents ive ever paid out the ass for. outstanding lubricant that doesnt attract as much crap as you'd think.

>>31050401
how about you bubba sergei mosin back to life so he can slap your stupid shit

>>31028426
What fun should I buy next?
AR-15 stripped lower of some sort with build kit and upper build kit too (first build, n00b)
Some shotgun, Mossberg or pre '08 Remington
Mosin Nagant or some other WW2 era battle rifle
Fudd gun probably in .30-06 for hunting deer
I haven't had much time to research guns lately because I've been working 10 hour days but I have an easier schedule coming up

>>31028426
Ok so I live in a ban state. The Attorney General banned all AR and AK type platforms. Any firearm which physically resembles or works internally the same as the ban guns are no longer allowed. I can't buy 80% lowers, I can't go out of state to make the purchase but I can do a private transaction. However, people are asking $1300 and up for M&P15s and Ruger 556s, and I refuse to do that.

Here are a few of the dozen or so autoloaders we are allowed to have now:
>Mini-14s
>Mini-30s
>M1As

Now, the only workaround I can think of is to purchase a pump action AR style rifle (like a Remington 7615.) Does anyone know much about pump action 5.56 rifles? Are they garbage? Should I just go with the Mini-14 over the pump action rifle? If anyone can help, it'd be appreciated.

>mass.gov/ago/public-safety/appendix-a-guns-list.pdf
Here's the list of rifles we're allowed to have, just incase anyone cares to look
Also, can anyone tell me how true this is of Mini-30s? This came from Brownells website:
>At the time the Mini-30 was introduced very few bullet makers where producing .311/.312 inch bullets for reloading in the light 125-130 grain weight required. Ruger initiated the use of barrels with a groove dimension of .308 inch and a long tapered throat. The throat allowed the use of ammunition with .311/.312 projectiles by gradually squeezing them to the .308 diameter. In addition, ammunition loaded with more commonly available .308 diameter bullets could also be used.

>Commencing in 1992 Ruger initiated a change to using .311/.312 nominal groove diameter, 1-10 inch right hand twist barrels in all Mini-30's. It was likely well into 1993 before all rifles coming of the production line incorporated the .311/.312 barrels.

Do the Yugoslavian M1 gas masks contain asbestos/chromium/anything harmful? I recently found out what it was, trying to figure out whether it's safe to use or not.

>>31050401
As long as you're keeping it for life and you're going to modify it for your uses, and not to be an asshole, you can do whatever you like.

However, the "scout rifle" is unbelievably retarded in any modern usage, and taking a forward "scout" position with a five shot, 5 moa, bolt action rifle with a slower straight bolt is an even worse idea

>>31051561
Get the fuck out of Massachusetts for one thing. NH isn't that far away, and Rhode Island can't possibly be worse than that horse shit the AG is pulling.

Next, if the Ares SCR isn't banned, get that. I have a feeling it is because "LOL INTERCHANGABLE PARTS".

Finally, if you can get a 'pump action' AR, and the lower is still in spec, why not just throw out the upper and get a normal one?

File: tfwnotHKatall.jpg (372KB, 956x1280px) Image search: [Google]

372KB, 956x1280px

Century93 or AR15?

File: 782876.jpg (167KB, 880x660px) Image search: [Google]

167KB, 880x660px

just started attending pistol classes I'm a decent shot, i tried a few calibers where would you place 9mm on recoil. for reference i shot 22rimfire 38special and 45. while i can shoot a 45 i don't feel comfortable with it & aim goes to crap after 4 rounds.

Question:

Some of my steel pistol magazines have patchy areas of rust speckling. I wipe them down with CLP once in a while. Is there more I should do, or is that good enough to keep them from rusting more? The magazines work great.

>>31053321
I think 9mm has controllable recoil if you've got both hands on the gun. My 38spl snubnose has a lot more bite than my 9mm from a glock 19.

Can a security guard in a state that certifies you "qualified" with a specific pistol or shotgun and gives you a card that says you can use that gun only get qualified with an AR pistol to get around the laws?

Is it okay to store my guns in hard cases all the time if I get the right kind of foam?

File: Many_bullets.jpg (442KB, 2736x1540px) Image search: [Google]

442KB, 2736x1540px

So you have rifles sending sub-100 grain bullets down range at 2-3 times the speed of sound, but then we have handguns shooting often over 100 grain bullets down range at or below the speed of sound.

Why not lighten the bullets and increase the speed for handguns?

Am I overreacting or is my dad being an idiot?

A break in in my area spurred a bit of a discussion on guns and I ended up asking him "where is your gun, anyway?" He responds with something like "somewhere in my nightstand", and I ask him if at least he knows if the magazine is in the gun or not or if a bullet is chambered. He doesn't know any of these for certain.

Isn't it simple gun safety and responsibility to know exactly where your gun is and if the magazine is in it, has a round chambered, what direction it's facing if it is?
I'm not even into guns that much and this ignorance freaks me out.

>>31053965
If there are no kids in the house it's not a huge deal.

The main issue is what if he needed to use it and there is no ammo in it and he's not sure where it's at or can't get to it right away. Gun with no ammo when you need it is useless when a home invader is busting down your bedroom door.

>>31054061
no kids.
Yea that's what I'm worried about. Thanks for the reply.

About a year back I attempted to thread the end of my 7.62 saiga barrel. I got all the necessary tools and went slow but somehow still managed to get it slightly crooked. Long story short, the crowning on the end of the barrel is fucked. Will a regular 7.62 AK barrel fit a converted saiga?

In fighter jets when they use the term "pirate", what does it mean? Is it like bogey?

Tula vs Wolf, is there really a difference?

Did I fuck up buying a taurus 809 compact ? I've put 200 rounds through it already and it seems like it works fine now that I've gotten a handle on how to not jam it (first time fun owner)

>>31037788
>WI
wat