Stupid idea thread

>>30393639
ok smartass

packaging cost vs hazmat fees

>>30393649
This is why I said stupid idea thread. obviously it'll cost more in startup and probably well into actually selling it.

> customer loads .50bmg blank into rifle
> shoots blank
> rifle kb
> customer dies or is injured
> lawsuits

Maybe if you made some kind of bizarro wildcat.
Somebody neck down a can of powder to .50 and figure out a way to prime it.
.50 Hornadyeargesplitten superboomer

>>30394021
Laughed hard as the name

>>30394021
I'm pretty sure one could make a gun to fire that at least once, before shooting out the barrel

File: lel.gif (884KB, 245x138px) Image search: [Google]

884KB, 245x138px

>>30394021
I'm giggling

>>30394021
Neck it down to 1-3mm or so and it could double as a powder trickler

>>30393639

FWIW, blanks also have to ship as hazmat, as do primed brass.

What do you think a primer is? Hint: you need a catalyst for the powder in the cartridge. Catalyst in this case is a small explosive. Oh wait, that's a primer.

Silly dilly dookie head.

>>30393639
>stupid idea thread
beef the FUCK out of the AR platform so it wants to snap back into battery extremely fast

because 2000rpm rifles should be a thing.

File: johnwaynelaugh.jpg (27KB, 400x300px) Image search: [Google]

27KB, 400x300px

>>30394021
>neck down a can of powder to .50

Is there a .50 cal AR15, if not, make one

>>30397948
There is .50 beowolf, and single shot uppers for .50 BMG.

>>30397948

Beowulf

>>30393639
I would like to see cartridge that is nothing more than a .50 BMG sized down 50%. So essentially Then take an M107 and size that shit down 50%. Shit would be cute as fuck.

6.35x49.5NEATO

File: 1392077767358.jpg (229KB, 1024x640px) Image search: [Google]

229KB, 1024x640px

>>30393639
The Caster gun remade to work with 12Ga Shells. I need this because of reasons

>>30393639
Garand, but with a detachable magazine, pistol grip, and chambered in 6.5 carcano

There needs to be a firearm chamber cut to fit a cartridge made from copper piping. Like a small pipe with an end cap, then a projectile sized to fit said pipe.

Just a rigged cartridge you can easily make in your basement that would be a fuck you to gun and ammo control.

.30 Carbine version of the desert eagle

File: E11_dice_image.png (75KB, 540x230px) Image search: [Google]

75KB, 540x230px

get a Sterling SMG, give it an integral suppressor, but then put some kinda whistle on the end so that it sounds like a blaster. Shoot tracers

neck down a 40mm Bofors to .22 or .17.

Adopt 338 LM as the new standard NATO round, replacing 7.62x51

File: gat.png (20KB, 1112x920px) Image search: [Google]

20KB, 1112x920px

A true caseless ammuntion...A solid projectile. The firearm would seat the projectile into the rifling and create a gas seal and then essentially use a pressurized air/fuel mixture and a spark plug to set off the round and a hand cranked piston to compress the air/fuel mixture.

>tldr - use the operation of an internal combustion engine to launch a projectile.

It would probably have to be a break action firearm for it to be simple.

>>30398077
Spud gun + break action airshit = why would you do that anon

>>30398071
This is a great way to send bullets to another dimension

>>30398094
Not a spud but an actual lead projectile. It would use a steel construction and gasoline instead of PVC and hair spray. This is actually compressed unlike a spud gun.

>>30398077
Already kinda exists anon. Look up "dieseling an air rifle". Works to the same effect, just without the ignitor like your pic.

>>30398077
I'd buy one. Sounds pretty cool.

Also, AFT says a "firearm" uses a "fixed cartridge", so you could use this to avoid such labels and restrictions.

>>30398127
Yes, like i said. You're talking about pouring gasoline into a pellet gun

>>30397181
The FAMAS gets like 1000rpm and even that is stupid fast.

>>30396408
before throwing it out of a plane?

>>30397102

Actually primed brass does not have to pay hazmat from my experience.

A .50bmg AK

Oh wait that one attention whore retard on Youtube already made one and it weighs like 100lbs.

>>30398016
Isn't .50 bmg a scaled up .30-06? Anal with those dimensions why not update a 6.5 swede, carcano, or mannlicher? Or use .260 rem?

>>30400721
And with* how could my phone do this to me?

>>30400721
.260 Remington isn't so good for mag length loads holding 140gr pills securely.
Go creedmoor

Magazine-fed break-action rifle/shotgun
Impractical, but would probably be fun as fuck to swing around

>>30398021
Not a terrible idea for a smoothbore pistol.

>>30398057
Is that a shoulder thing that goes up?

File: 45mm_CLGG_figure_1[1].jpg (27KB, 371x191px) Image search: [Google]

27KB, 371x191px

>>30398077
Liquid and fluid propellants have been studied with various degrees of success, including a fuel-air rifle (http://www.pyramydair.com/blog/2006/05/weihrauch-barakuda-el54-ether-injection-air-rifle/ is an early example of an intentionally dieseling air rifle) as well as with more refined fluid mixtures by militaries;

http://www.dtic.mil/dtic/tr/fulltext/u2/a188575.pdf
https://en.wikipedia.org/wiki/Combustion_light-gas_gun
https://en.wikipedia.org/wiki/Bulk_loaded_liquid_propellants

File: 20160513_130251.jpg (1MB, 2560x1920px) Image search: [Google]

1MB, 2560x1920px

>>30393639
>I made this for a thread quite some time ago that was discussing use of high explosives in ammunition
I present... EFP ammunition. This uses a thick-walled casing partially packed with high explosives covered by a concave metal disc, similarly to the explosively-formed penetrator IEDs commonly found in Trashcanistan. The funnel-like chamber is intended to taper down with the disc's diameter until the barrel is similar in diameter to the projectile.
>the original thread was obvious bait and I did a lot more than just fall for it

File: 1456284112520.jpg (1MB, 2560x1920px) Image search: [Google]

1MB, 2560x1920px

>>30401000
Alphabet key if anyone needs it; I write everything I don't want people reading in a shitty runic-looking alphabet that I came up while waiting to leave after school about three years ago. Pic related isn't the original key but it's accurate.

>>30398282
WITH NO SURVIVORS

File: 1385253309078.jpg (58KB, 640x512px) Image search: [Google]

58KB, 640x512px

>>30394021
>neck down a can of powder to .50

>>30401053
Holy autism

>>30398041
It's called a 12 gauge anon and you can make one for like $15

File: roman_auxiliary1.jpg (370KB, 1016x758px) Image search: [Google]

370KB, 1016x758px

Occupy 3rd world countries and create dedicated units composed of 3rd world citizens but administrated by, led by, and part of the occupying nation's military forces.

Oh wait, wrong thread.

File: 1456285106096.jpg (1MB, 2560x1920px) Image search: [Google]

1MB, 2560x1920px

>>30401294
I'm not actually autistic (very close to the Asperger's end of the spectrum, have been tested) but I've found that I'm very similarly minded to the high-functioning aspies I've met. I honestly don't give a shit if you call me autistic.

File: notes-1.png (3MB, 1110x1435px) Image search: [Google]

3MB, 1110x1435px

>>30401053

Pfft. Low effort babby.

My superior script has a completely reformed alphabet, with 12 base letters that can be modified either morphologically or with diacritics to form more than 100 unique potential symbols.

Wait wait wait, what if we necked down a 16 inch shell from the Iowa to .22, even .50

File: Genedbf.png (564KB, 959x720px) Image search: [Google]

564KB, 959x720px

>>30398021
I'm more interested in this weapon...

>>30402759
this looks like greek written leonardo style.

>>30393639
>transport truck gets into wreck
>plastic catches fire
>yyuuuggeeee explosion

also, not everyone has a reloading machine to reload the powder into the casing.

>>30393639
also, you do understand that the hazmat IS the gunpowder.....so the hazmat fee would still exist.

>>30400912
A barrel shroud?

>>30393639
You may want to read up on the US HAZMAT regulations.
You'll still get HAZMAT fees, and if you sit HAZMAT without labels, you and the recipient will get investigated and at the least the sender will do federal time anon.
HAZMAT is not something you want to fuck with.
Just so you know.

>>30398050
This is a thread for BAD ideas friend

File: .327 Fed Mag, 4.6x30, .17 Mach 2.jpg (63KB, 689x768px) Image search: [Google]

63KB, 689x768px

MP7 in .327 Fed Mag

File: 762natoin3006.jpg (19KB, 600x220px) Image search: [Google]

19KB, 600x220px

.40 NATO

>>30393639
an entire .45acp boolet crammed into a 12 gauge shell as a slug.

minus only the primer of course

>>30401000
>SQUIB BLASTER 2000

>>30399395
Sauce?

>>30405126
http://lmgtfy.com/?q=.50+BMG+AK

>>30405174
i love you anon

File: .30 carbine magazines.jpg (521KB, 922x1229px) Image search: [Google]

521KB, 922x1229px

>>30398050
I've had that idea forever.
It could easily have a double-stacked, dual feed magazine which would neatly fit inside of the dimensions of it's grip, like 15 to 20+ rounds flush.

.30 Carbine ammo would probably run remarkably better given the gas system, I'd insist on an extended barrel though, as well as a threaded barrel so you can fit a flash hider, because sweet Jesus have you shoot a .30 Carbine pistol before? That shit is loud and bright.

I think that with a 10" barrel, and a bottom rail to mount a bipod on, then putting an optic on top, you would have a phenomenally nice bench shooting gun.

The one downside to this whole idea is that for a .30 Carbine Deagle to be made this way, a lot of time and money would have to be invested into making a new Deagle from the ground up, as one of the main themes of the Deagle is that it's easily modular, all calibers are the same size and all, all you need to convert a .357 Deagle to .44 is the barrel, magazines and slide, all you need to convert a .44 to .50 is a new barrel and mags (using the same slide), and so on.
This is something you would have to sacrifice to make a double-stacked .30 Carbine Eagle

>>30404862
Muh dick. This needs to happen. But it should be rimless, i want hi-cap mags.

>>30401329
Im talking some shit where if there was some sort of ammo ban, the cartridge itself can be made with common material.

>>30403859
If they didn't have a reloading press, why would the be buying powder and primers?

>>30403884
There are hazmat fees for powder and primers.
>Buy powder, pay fee
>Buy primers, pay fee
>Buy full cartridges with powder, primer and bullet already in case, no hazmat fees

>>30404985
Top kek...