AR THREAD GENERAL AR GENERAL /ARG/

inward

File: 1466180937913.jpg (3MB, 3735x2049px) Image search: [Google]

3MB, 3735x2049px

>>30372548
in

File: image.jpg (94KB, 388x648px) Image search: [Google]

94KB, 388x648px

>>30372548
ARs should have AK style cleaning rods on them

File: IMG_1339.jpg (548KB, 1224x1632px) Image search: [Google]

548KB, 1224x1632px

posting comedy in honor of ym thread

https://www.youtube.com/watch?v=ZblPwNLH6hg

File: tejas.jpg (323KB, 1328x747px) Image search: [Google]

323KB, 1328x747px

>>30372548
Yeehaw.

>>30372548
horses are beautiful fucking animals.

Life Plan
1) Improve skills to improve humanity
2) Get super fucking rich off of 1
3) Buy lots of fucking land and build an estate
4) Farm life for life.

>>30372603
There should be a rail with a cleaning rod in it parallel to the gas block.

File: DSC_1099.jpg (2MB, 1800x2710px) Image search: [Google]

2MB, 1800x2710px

>>30372623
Yehaw

>>30372629
>1) Improve skills to improve humanity
kek how is 6th grade?

Installing lpk.

Not paying attention.

Hear the dreaded sprrrrrrrinnnn


Detent spring is awol in the carpet.

>>30372603
Actually a decent idea.

>>30372633
that heat might cause issues with the rod?

File: IMG_8432.jpg (448KB, 1142x761px) Image search: [Google]

448KB, 1142x761px

>>30372661
vacuum then look through vacuum bin

File: filthy is good.jpg (2MB, 2212x2132px) Image search: [Google]

2MB, 2212x2132px

>>30372603
fucking why? who the fuck actually cleans their guns?

>>30372661
Iktf
That's why you buy a small spare parts kit

>>30372661
Magnets.

>>30372661
shoulda done it in a trash bag man.

t4 has good idea, use vacuum

>>30372652
M.S. actually. Honestly I am just optimistic because I am drunk and the senate just shot down all the "muh feels" gun control shit so. Feeling pretty good. But basically git gud and make bank off of it.

>>30372680
cleaning rods do more than allow you to clean the bore

>>30372661
Vacuum the look through it with magnets

>>30372548
Might be a stupid question, but when you paint your rifles do you disassemble the at all? Or do you just tape and spray?

File: Resized_20160618_145545.jpg (848KB, 2560x1440px) Image search: [Google]

848KB, 2560x1440px

fuck it, just going to get an acog for this.

get a light and sell the t1 or offset that shit?

also, red or green acog?

Already did the magnet.


It gets better.....

I think yhe spring went

Spring went down ac vent.

>>30372661
lol I fucking hate when I do that.

>>30372717
This

>>30372723
Save the T-1.
You'll use it for something good in the future.

>>30372723
Yea, just tape over the things you don't want painted

File: IMG_1148.jpg (592KB, 1632x1224px) Image search: [Google]

592KB, 1632x1224px

>>30372711
you do you m8

File: lumpy.jpg (294KB, 1299x714px) Image search: [Google]

294KB, 1299x714px

>>30372721
Tape optic lenses, controls you need to read (like turret markings), and I personally stuff an earplug in the muzzle.

>>30372739
Of course it did. Of all the places for that tiny spring to land why would it not land on the 1% (if that) of floor space where you would be fucked. Literally when this shit happens I can't help but think god is just bored and decided to be like "hey let me fuck with this guy for a bit".

>>30372773
meant for >>30372721

File: clevis pin.jpg (7KB, 400x400px) Image search: [Google]

7KB, 400x400px

>>30372661

clevis pin my man. got that shit first try no problem with one of these.

>>30372717
like what, fuck your urethra?

>>30372796
what that is

>>30372718
why not just skip a step and sweep the carpet with a hard drive magnet on a stick?

>>30372815
clevis pin

>>30372723
red

>>30372548
Is the SIG MCX an improved AR-15? Why or why not?

I'm trying to decide whether to go with an MCX or a higher-tier (>$2000) AR-15.

>>30372837
Get the AR unless you're going to shoot up a gay bar.

>>30372837
Just get a good AR.
The MCX doesn't have the track record

>>30372789
>>30372776
So you don't need to worry about paint getting on the barrel?

>>30372815

a clevis pin. a 1/4" diameter pin fits perfectly in the pivot pin holes, and the holes in the pin allow you to push the detent pin in and hold it in until you slide the pivot pin in.

>>30372852
Some of you anons are alright. Don't go to the gay bar tomorrow.

>>30372796
>>30372878
or just not be a retard and pay attention to what you are doing??

>>30372861
no
see >>30372596

>>30372858
>https://www.youtube.com/watch?v=zmyluo3aT0Y
But it looks really tacticool though. Can't you lend me some inferences?

File: chunkymunky.jpg (428KB, 877x493px) Image search: [Google]

428KB, 877x493px

>>30372861
Nah, if it burns, it burns. It is just spraypaint, you can always reapply it if you want to change schemes or it gets too beat up looking for your liking.

>>30372596
>>30372909
Sweet, thanks a bunch. I know what I'm doing this weekend

>>30372811
removing stuck casings? removing squibs? are you that unaware of the ar15 world? there are plenty of arguments for having a rigid cleaning rod.

>>30372884
t4 nails it again
savage

What does ARG think of vSeven light weight stuff? Meme or gucci?

File: image.png (131KB, 401x359px) Image search: [Google]

131KB, 401x359px

>>30372884
The salt

>>30372961
Gucci

>>30372902
You're probably fine either way

>>30372961
Their parts are fine, just remember that if lightweight is the goal, it is easier to drop weight on the larger rifle components than the small parts.

I would put v7 in the category of "if you already have everything else squared away"

>>30372943
>removing stuck casings? removing squibs?
i'm sorry, i don't have shit guns or buy shit ammo.

>>30372943
if this was such a big issue you would think they would already adopt shit like that. literal non issue

>>30372952
4u senpai

>>30372629
5. Get that sweet horse pussy

>>30372548
if you're going to ditch the lever action rifle, why not ditch the lever action motorcycle too.

>>30372983
oh well it happens, i'm happy to inform you about something. you must be new?

File: iofx7rf.jpg (139KB, 1280x879px) Image search: [Google]

139KB, 1280x879px

>>30373001
you're right, my bad

>>30373023
>oh well it happens
that attitude is why we will never colonize Uranus.

File: IMG_3665.jpg (598KB, 2484x1269px) Image search: [Google]

598KB, 2484x1269px

>tfw arms are finally getting big and juicy
>tfw taking AR innawoods tomorrow morning with a qt
>tfw finally getting a weapon light for my AR
>tfw the last thing I need to be done is a new trigger

I'm making it /arg/

>>30372548

That's neat. I always used less bulky saddle guns, when I carried a saddle gun.

Often just packed a pistol.

When I was younger and working beef, I usually used either a Beretta 92FS or a Ruger Blackhawk and a Stevens 20 gauge when working beef or riding the fence.

When I got older I packed a S&W hand ejector and an SKS for most beef work. I think a double action revolver and a milsurp rifle is pretty much the next evolution.

Trying to get back into that line of work, thinking about buying a big revolver and a levergun.

>>30372548
Maybe I'll order the MBT instead of a barrel. Would that be a fag thing to do?

>>30373060
oh, well it happens.

oh as in i acknowledge you're fucking retarded and unaware of the realistic practical uses for a rigid cleaning rod

it happens as in, despite your retarded arrogance you're wrong.

did that clear it up for you?

>>30373097
would it be a fag thing to actually get your fucking lower milled?

>>30373097
you're not gonna order anything, poorfag.

>>30373097
order anything at this point

>>30373110
Yerp

no u

>>30373115
L m a o

File: 1458178980986.png (46KB, 960x620px) Image search: [Google]

46KB, 960x620px

>>30373106
>did that clear it up for you?
no, get to the heart of the issue, why does it happen?

>>30372548
I know people tend to shy away from receivers made of 6061. What about rails? I see a lot made from 6061, is that more common than 7075?

File: zed.jpg (37KB, 820x636px) Image search: [Google]

37KB, 820x636px

>>30373138
>explain complex issues simply
well you see giddy.... anytime humans make things there's a margin of failure...

File: 20160620_224059.jpg (644KB, 2048x1152px) Image search: [Google]

644KB, 2048x1152px

>>30372548
Out. Except my senpai has a horse.

File: 20160217_202042 (2100x1181).jpg (997KB, 2100x1181px) Image search: [Google]

997KB, 2100x1181px

>>30373142
best rails in the world are made from 6061

>>30373170
>there's a margin of failure
how do we reduce this to almost non-existent

File: image.jpg (2MB, 2000x1339px) Image search: [Google]

2MB, 2000x1339px

>>30373179
Robots.

>>30373197
and what do robots do/allow for?

>>30373175
What the shit is this auto correct?
"senpai" changed to "senpai"

File: mk12 a.jpg (290KB, 1024x768px) Image search: [Google]

290KB, 1024x768px

>>30373197
when are you going to finish your lower

>>30373179
it's already reduced, are you unaware of how many rounds ATK puts out in a year?

what a horrible conflation you're attempting to make....

HURR NO ONE NEEDS THAT CUZ IT'S RARE/NONEXISTANT

so can a rigid cleaning rod remove stuck rounds and cases or not?

literally what's going on right now.

File: DDLite.jpg (108KB, 800x600px) Image search: [Google]

108KB, 800x600px

>>30373179

>Daniel Defense 'Lite'

Fuck. I've always like dthat design, but god damn it will really push the boundaries of the budget I laid out for myself.

File: 20160622_185503-1.jpg (3MB, 2709x1845px) Image search: [Google]

3MB, 2709x1845px

Finally completed my rifle with a strike eagle, R8 my raifu.

File: image.png (745KB, 750x1334px) Image search: [Google]

745KB, 750x1334px

yay or nay

http://m.ebay.com/itm/172248742027

>>30373227
yikes/10

>>30373230
sure

>>30373217
Guys can we just stop conflating

File: image.jpg (4MB, 4032x3024px) Image search: [Google]

4MB, 4032x3024px

>>30373206
If done right they don fug up

>>30373211
It's not me delaying anymore. Buddy at work has a mill and said he will do it but we are both busy as fuck

It could quite possibly be the last component to finish.

I'm gonna look over my finances next Friday. I think I'll be g2g on the barrel, but if not I'll prob look at the MBT since it's apparently p. Good

>>30373230
GET A BETTER JOB

>>30373230
Find one with more sand in it. I haven't paid more than $80 for any of the ebay surefires I've had.

File: image.jpg (83KB, 750x732px) Image search: [Google]

83KB, 750x732px

>>30373240
I'M TRYING

>>30373234
You've gotta give a little more feed back than that anon. Improvements?

>>30373225
mine is a ris ii

>>30373230
nay

>>30373217
>HURR NO ONE NEEDS THAT CUZ IT'S RARE/NONEXISTANT
pretty much

File: IMG_8427.jpg (275KB, 1142x761px) Image search: [Google]

275KB, 1142x761px

>>30373240
if you says o

>>30373262
get a new stock/rail/MD

>>30373268
>mine is a ris ii

Does it have any big negatives?

>>30373268
>pretty much
i got a link for you: https://simple.wikipedia.org/wiki/Value_judgement

simple english just for you

>>30373179
>best rails in the world are made from 6061
DD? Which one? Lite rail?

File: 1444528710991.png (1MB, 1920x1080px) Image search: [Google]

1MB, 1920x1080px

>>30372548
>I will never hit big moneys
>I will never move the fuck out and onto LAND
>I will never have a few horses
>I will never ride them, give them earmuffs, and shoot with them
I just want horse friends damn it

File: 20160604_144459.jpg (1MB, 4032x3024px) Image search: [Google]

1MB, 4032x3024px

>>30373287
doesn't even have small negatives.

>>30373302
>I will never hit big moneys
not with that attitude

>>30373299
everything i say is fact.

btw, i used to think like you, then i got a good ar and now i don't think like a tard

>>30373301
lite iii and ris ii

File: ar.png (1012KB, 2000x917px) Image search: [Google]

1012KB, 2000x917px

>>30373312
I wish I didn't have that attitude anymore

>>30373252
Then stop buying things

>>30373197
What upper receiver?

>>30373142
there is only one rail i know of made of 7075

its really pointless

>>30373326
i'm sorry, was simple english not simple enough?

hmm....

>>30373367
just stop buying tula reloads

File: IMG_1348.jpg (664KB, 1632x1210px) Image search: [Google]

664KB, 1632x1210px

>>30373327
at least you can look forward to maga

>>30373351
is it the larue?

File: 20160622_190935-1.jpg (3MB, 1329x3762px) Image search: [Google]

3MB, 1329x3762px

>>30373274
How bout this? I've been looking at low concussion MD but I can't find one I like

>>30373396
no, the mega arms wedge lock rail

>>30373303

Not even the hex bolt fasteners? Ok.

>>30373349
Gibbz

>>30373408
If a flash hider isn't tame enough for you, you'll need to get into a linear.

>>30373412
doesn't larue use 7075?

>>30373408
m8 you do you. if you like it who cares what i think

>>30373408
18"barrel?

>>30373466
I'm just looking for sugestions, I've got an incomplete build that I'm still looking for parts for.

>>30373455
i dont know
they don't say

i doubt it
most rails are extruded 6061

>>30373455
they dont list it

>>30373491
im not a fan of all dat exposed barrel or either of those stocks

>>30373443
Have you owned or shot any linear comps?
>>30373489
No, 20 inch BCM.

>>30372796
I was using the razor blade method.

>>30373382
so because i am saying that a cleaning rod can be used to remove stuck cases and projectiles somehow that must mean personally all my rounds get stuck?

IF U AREN'T FOR HILLARY U MUST BE FOR TRUMP retard logic

i've been trying to figure out why stupid people think this way for many years.. very perplexing.

File: 1466573198139.png (154KB, 953x397px) Image search: [Google]

154KB, 953x397px

>>30373508
Showing too much leg

>>30373520
>20"
Ahh man you need some long distance thinking on that. Higher mag scope

>>30373527
What's retarded is thinking ARs need cleaning rods attached at all times for the rare evet one is needed.

>>30373531
That's fine but that stock is cancer

>>30373553
It used to be cool :(

>>30373527
>remove stuck cases and projectiles
how do we stop this

File: DSC_7731.jpg (2MB, 2400x1600px) Image search: [Google]

2MB, 2400x1600px

>>30373553
>That's fine but that stock is cancer
i want you to very carefully put your ar muzzle into your mouth and mcfucking kill yourself

File: image.jpg (22KB, 260x194px) Image search: [Google]

22KB, 260x194px

>>30373553

>>30373531
Could I buy a shockwave complete lower and put this upper on it?

>>30373553
>What's retarded is thinking ARs need cleaning rods attached at all times for the rare evet one is needed.
fair, but a rigid one is still useful for the aforementioned reasons. and when you need one, you really need one. it's no different than any other prophylactic tool or spare part people carry.

>>30373575
kek on my phone and the thumbnail looked like the bcm stock.

File: image.png (221KB, 750x1334px) Image search: [Google]

221KB, 750x1334px

>>30373597
Lmao'ing at stupid mobile poster

>>30373594
yeah like when tulammo cases get stuck
i'm thinking of a photo of some secops guy with a cleaning rod taped to the side of his mk18

>>30373597
oh ok

>>30373614
>mobile
>stupid
My don't think so

>>30373594
eh if it was really a big problem you would see rods on ARs, I think it's a non issue.

>>30373614
only on phone cause in bed. I h8 it

>>30373623
>i'm thinking of a photo of some secops guy with a cleaning rod taped to the side of his mk18
im making the case for having a cleaning rod that's rigid more than on-rifle storage of it.

>>30373552
Eh, idk the BCM is chrome lined. I still don't know how accurate my barrel is, I can alway move this scope to a different rifle.
>>30373508
With a 20 inch barrel I'm kind of stuck with the extra barrel.

File: 14455140379_3cfbe2ae5e_b.jpg (187KB, 1024x585px) Image search: [Google]

187KB, 1024x585px

>>30373623
Delivered.

File: image.jpg (922KB, 2592x1144px) Image search: [Google]

922KB, 2592x1144px

Muh baybee. I think the ejector spring is week. Some FTE's last time out and seemed like it had less stiffness than another that I took out.

Getting the BCG coated by a buddy that does TiN and other coatings for aerospace and gun manufacturers. Saw some brands in his shop while I was walking through. Doing a Diamond Like Carbon coating with a low friction coating on top of it.

>>30373629
Yes

>>30373640
It's 7 in the evening wtf you bed

File: msot-operator-hr.jpg (2MB, 5616x3744px) Image search: [Google]

2MB, 5616x3744px

>>30373644
?¿
what is more rigid than a straight steel rod

>>30373662
>>30373678
yeah
thats really going to interfere with his port cover

>>30373676
Some of us have jobs in the morning.

>>30373654
Eh idk then. I guess avoid close quarter accessories

>>30373686
Is someone shilling your trip?

>>30373678
>>30373662
he should stop shooting brown bear ammo

File: 1448411756647.jpg (170KB, 800x517px) Image search: [Google]

170KB, 800x517px

>>30373668
That fucking MRO mount makes me chuckle everytime i See it

>>30373697
And?

>>30372623
That looks really nice

>>30373710
Yeah still kinda feeling it out till i find what i like. These MI hand guards get hot as fuck when its 90 degrees out and I go through 60 rounds in 5 minutes, a grip or gloves are a necessity.

File: image.jpg (1MB, 3186x2448px) Image search: [Google]

1MB, 3186x2448px

>>30373743
I'd rather not die at work cause I'm sleepy. 8 hours is what I need

File: 1465921332606.gif (2MB, 560x315px) Image search: [Google]

2MB, 560x315px

oh now i remember why i had overwatch in borderless windowed mode
it nukes my monitors in fullscreen
and i love that battle.net breaks my shortcuts when it updates
top tier work, blizzard

>>30373730
it's banned again
i can't tell why because the archive got shut down because lol CP

>>30373731
*tulammo

MBT or Giessele?

>>30373775
>die at work

Eh?

>>30373778
*any ammo from slavland

>>30373784
pick your meme
who are you going to shill for

both are perfectly fine

>>30373678
i am making the case for having a steel rod, instead of not having one. fluffy said he wants on-rifle storage of a cleaning rod.

>>30373731
hurr durr my value judgements

>>30373531
>>30373553
Someone can put a ctr on it?
And/or make it all fde

>>30373802
lots of ways to get seriously hurt

>>30373778
shoot that brown bear yet senpai?

>>30373827
You play with shit right

>>30372661
This happened to me, both detent and the spring flew. Found the detent spring next to the cat box and three weeks later found the detent that I had replaced.

>>30373784
MBT, help tell the geislelelel how far $125 should go

>>30373833
yeah

>>30373827
no

>>30373841
What exactly do you homos do with it?

>>30373843
oh

>>30373852
Stuff :^

>>30373804
it's funny because i've shot over 2400 rounds and just ordered a case of 1200 rounds for my AR and never has a single round been steel cased. brass cased and boxer primed. half of it from america, half of it from mke

but you keep making those weird brain problem assertions kiddo :)

>>30373858
Gay stuff huh

>>30373840
this.

File: image.jpg (1MB, 3264x2328px) Image search: [Google]

1MB, 3264x2328px

>>30373901
Out of all the stupid shit I've seen people put on ARs I think a cleaning rod isnt that bad

>>30373807
>fluffy said
fluffy is a retard

>>30373901
o-ok

File: image.gif (394KB, 320x240px) Image search: [Google]

394KB, 320x240px

>>30373978
Kys

File: ar_nightstand_052816.jpg (2MB, 2160x1440px) Image search: [Google]

2MB, 2160x1440px

that feel when congress doesn't vote in any more restrictions after le liberal panic meme.

feels good man.

Also, 135 days on form 4, 102 on form 1. praying to ted clutter to save me.

>>30372902
Okay, lemme break this down Barney for you.
>the factory stock is flimsy and prone to breaking (much like first gen ACR and first/second gen SCAR, only when the MCX's breaks it's actually unusable
There's 1 aftermarket stock for it, it's that weird yuro cop one that intentionally eliminates any hope of a cheek/chin/chest weld though and it's like $300. Also it still breaks, though not as much as the plastic skeletonized one

>every last thing on that gun, all the way down to the muzzle device, is proprietary
No tacticool Mlok/dickmod sooper skinny railz for you. Or suppressor adaptor muzzle devices without re-threading the barrel, because SIG in its infinite wisdom uses the standard thread pitch (1/2x28) but threads it super shallow.

>there is basically zero aftermarket for it because it is literally special-snowflake tier
Even the ACR has aftermarket handguards, but not the MCX. And 99.99% of AR stuff doesn't work on it, I think it's pretty much just the hammer and grip. Even the sear and disconnector are different (though whether they're different enough to preclude an aftermarket AR trigger group entirely I don't know).

>it's ridiculously expensive for what it is, which is basically a Galil in AR garb. Doesn't even have a particularly good barrel, unlike all the other "AR-killer" meme guns like the ACR, SCAR16s, Tavor, etc.

File: ammo.jpg (207KB, 1305x876px) Image search: [Google]

207KB, 1305x876px

>>30373978
here goes a little of it, one of the 420 round cans is empty, the other is sealed new. the mke box is 1200 rounds unopened. just arrived today.

whens the best time to pick up a geissele trigger? whens the next sale

File: loadout_050816.jpg (1MB, 1500x1000px) Image search: [Google]

1MB, 1500x1000px

>>30374123
4th of july ya dip

>>30373197
WHat everything on this rifle. I know the upper is gibbz but like wtf is the lower an the rail. I really like this rifle.

>>30374136
thanks, i couldn't remember if geissele had 4th of July sales

File: RanchGun.jpg (458KB, 1162x778px) Image search: [Google]

458KB, 1162x778px

>>30374123
Now's as good a time from any.

File: sniper_shot2_292.jpg (54KB, 600x450px) Image search: [Google]

54KB, 600x450px

>>30374113
and?

>>30374023
lol, just do it.

>>30374154
Geissele isn't the only place that sells Geissele. Pretty much every online store does too, and they are all going to have 4th sales.

File: 1466572701750.png (3MB, 3159x756px) Image search: [Google]

3MB, 3159x756px

>>30374165
>Now's as good a time from any.
>from
Whoops, meant "as"

>>30373227
>shit stock
>shit AFG
>dickmod handguard, attached a $20 rail to attach a $30 AFG instead of buying the $25 dickmod AFG
>AFG back way the fuck too far
>decade obsolete BUIS
>shit MD that's literally the same price as a decent MD
>BUIS and non-QD mount. One or the other hombre
>scope mounted too far back, eye relief wrong
>gov't profile barrel
>50 shades of gay (I mean FDE)
>foot in picture
>sock is filthy
like a 2/10

Also, you wouldn't happen to live on Lumberly Lane by chance? That looks exactly like the office/spare bedroom of a house I sold in 2014. All the way down to the woodwork installed by a drunken meth-head and no outlet covers.

File: image.jpg (65KB, 800x419px) Image search: [Google]

65KB, 800x419px

>>30372548
Would /arg/ make fun of me for pic related? Thinking about doing it on a SPR build.

>>30374168
but I thought 5.56 was useless at killing people

>>30374168
and kys

>>30372548
Where the fuck did you find that scabbard?

WANT WANT WANT WANT WANT

I got my girlfriend into guns via mounted shooting, but all she wants to shoot is lever, double barrel and revolvers because they're cowboy guns. If I had a scabbard like this for an AR she'd totally get into AR.

>>30373197
Mmmm

why is the SSF trigger 130 bucks more then the SSA

>>30374218
I bet if you used google you could find one

>>30373973
hey, I have that flashlight.

>>30374192
Retrofit pistons are always laughed at.

File: 300BLKvs556.jpg (53KB, 1023x612px) Image search: [Google]

53KB, 1023x612px

AK owning slavshit lover here.

If 5.56 is so much better than 7.62x39, why was an entirely new round designed for the AR platform for the sole purpose of mimicking the performance of the 7.62x39?

>>30374236
Not nearly as much of a market for them

>>30374192
Where is the cleaning rod stored?

>>30374253
Y not

>>30374236
I'll let you know in 6 months when the stamp comes in.

File: AR15 Done.jpg (4MB, 3000x2250px) Image search: [Google]

4MB, 3000x2250px

Might get a gold Cryptic bolt carrier group. yes or No?

>>30374218
Dated a barrel racer, can confirm only cowgirl fantasies with an acute aversion to autoloaders.

>>30374253
It wasn't?

It was designed to be able to switch from heavy subsonic ammo to light supersonic ammo without changing a fucking thing, while providing good range and "killing power" from <10" barrels.

An AK and 7.62x39 can do neither of those.

Also, .300blk factory ammo is about 3% better ballistically for 60% of the recoil, and handloads can do even better.

>>30374284
Dang

is it worth it to get a SSA over a G2S

>>30374253

AK fag here. This is an absolutely fucking stupid question IMO.

File: 300-aac-blackout-618x412.jpg (31KB, 618x412px) Image search: [Google]

31KB, 618x412px

>>30374285

>developed in the United States by Advanced Armament Corporation (AAC) for use in the M4 carbine. Its purpose is to achieve ballistics similar to the 7.62×39mm Soviet cartridge in an AR-15 platform while using standard AR-15 magazines at their normal capacity.

https://en.wikipedia.org/wiki/300_AAC_Blackout_(7.62%C3%9735mm)

Hell even their website says it "matches the ballistics of the 7.62x39mm AK, and eclipses 5.56mm with much higher-mass projectiles for a more dramatic effect on the target."

http://300aacblackout.com/

Not trying to be a cheeky cunt, just want some answers.

File: PWS_DI_Carrier_with_bolt.jpg (88KB, 700x450px) Image search: [Google]

88KB, 700x450px

gucci incoming

>>30374225
>>30374139
That's an anons gun. Sexy huh?

>>30374362
WASTE OF MONEY
A
S
T
E

O
F

M
O
N
E
Y

>>30374413
Yes it is. I am literally searching for the lower.

File: GABCG556-2.jpg (74KB, 500x300px) Image search: [Google]

74KB, 500x300px

>>30374421
?
It was $10 more than the griffin armament BCG I was looking at, and it's heavier which will go nicely with my pistol.

>>30374253
>
if 7.62x39 is so good, why did the russ abandon it and switch to a round that copies the 5.56?

>>30374362
no cryptic? lame

File: MiMJmDX.png (608KB, 1280x720px) Image search: [Google]

608KB, 1280x720px

>>30374353

Your first assumption was that 5.56 is automatically superior to 7.62x39. That's not universally a true statement, the latter is a devastating cartridge, and even outperforms the former in a few specialized areas such as cover penetration.

The .300 Blackout is essentially an evolved 7.62x39 that fills the same niche, and can do all the shit >>30374285 mentioned, such as subsonic rounds and less recoil.

And on top of that, it's a round that can be easily slapped into a weapons system that is better in almost every conceivable way to the AK platform.

File: image.jpg (30KB, 242x208px) Image search: [Google]

30KB, 242x208px

>>30374457
DELETE THIS

>>30373086
I'm mirin

>>30374281
no

>>30374456
oh i didn't bother to read the file name or look at the pic, i thought it was one of those cryptic ones

>>30374435
Idk what any of it is besides upper and stock

Need to know handgaurd

File: deer in the crosshairs.jpg (440KB, 1200x896px) Image search: [Google]

440KB, 1200x896px

>looking for ground hogs
>see deer
>looking for deer
>see groundhogs
now I remember why I stopped hunting for a while

>>30374435
Looks like a spikes or any other regular lower with pictograms.

>>30374316
mbt if ur poor

>>30374461
>>30374484
cryptic is too many dollars
I probably should have waited to get this, but I'm too dumb for that.

File: 20160605_200556.jpg (516KB, 2048x1152px) Image search: [Google]

516KB, 2048x1152px

>>30374538
They know

>>30374538
>hunting

File: fuck that .png (31KB, 500x284px) Image search: [Google]

31KB, 500x284px

>>30374573

>>30374599

File: rsz_newpaint.jpg (1MB, 2016x1512px) Image search: [Google]

1MB, 2016x1512px

Is eotech still fucked? Is there literally no reason to own one anymore?

>>30374541
Spikes has goofy shit etched into their lowers at for the full auto settings. This has safe and semi bullet marked. I am thinking an aero http://aeroprecisionusa.com/ar15-stripped-lower-no-logo.html painted/coated with a large paddle mag release thing.

>>30374494 I need to know rail/handguard as well.

>>30374494
From what we can see...

Gibbz Upper
Milspec lower, with a Odin Works mag release
Magpul Enhanced Trigger Guard
BattleArms Selector
SLR Rifleworks Solo Ulta Lite Rail
Scalarworks Aimpoint mount
Magpul Pro Front and rear
Primary Arms Microdot
Magpul UBR
Magpul MOE grip
Griffin Armament MLOK Rail covers and Handstop
Tang Down iO Cover
Surefire MB556K

Unsure if actual brand:
Magpul BAD lever
Timney Trigger

>>30374605
I'm sorry, what are you trying to point out here?

SSA is 220 SSAE is 240

>>30374621
supposedly they've solved the leaking seals which is the bigger problem in my opinion

>>30374659
>SSA is 220 SSAE is 240

I paid $190 for my SSAE

>>30374670

What about thermal drift or is that just something that comes with all red dots? Cause it gets hot af in nevada

>>30374727
Just put an ice pack on it.

>>30374747

I like your style

File: 3615614658458614651.jpg (566KB, 1589x1037px) Image search: [Google]

566KB, 1589x1037px

>>30373668
That's a fancy pants MRO mount.

>>30374681
where?

File: IMG_20160614_090941730.jpg (2MB, 2340x4160px) Image search: [Google]

2MB, 2340x4160px

>>30374626
They don't put goofy shit on the right side senpai

File: 1424734641864.jpg (2MB, 2094x2727px) Image search: [Google]

2MB, 2094x2727px

Posted for TS

File: in the face.jpg (4MB, 3264x2448px) Image search: [Google]

4MB, 3264x2448px

>>30374599
how else are you gonna test your ballistics

>>30374653
Many thanks

>>30374727
i'm not sure, you'll have to look it up. i seem to recall they responded to the thermal issue too. that seems to be eveyone's focal point but imo it's not as big of a deal as leaking nitrogen out. i live a humid place, so it getting inside the unit and causing the holographic grating to delaminate is a serious issue for me.

>>30373230
Nope, I just bought it.

>>30374827
you paid too much.

>>30374799
Is that a Steyr?

>>30374790
Primary Arms 20% off sale.

I also got a 13" Geissele desert dirt rail for $220 a few month later

>>30374811

>>30374850
>Is that a Steyr?
Which one?

>>30374857
I found an mk8 1for 217 today

>>30374857
When do they have the sale

>>30374799
GET

ON

XB1

File: MAMS 3.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

Maybe I should take some pics of my horse with my AR :^

>>30372187
That's a sweet keyboard I've got there, anon.

>>303742922
Sprat painted one

File: 1463809689808.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30374879
I'm on xbone, but I have workaholics on in the background while I shitposttalk on TS and bounce on my boy's dick for hours.

File: Overwatch 06.22.2016 - 00.04.24.02_cut(1).webm (2MB, 1280x480px) Image search: [Google]

2MB, 1280x480px

>>30374906
get on pc poornigger

>>30374871
every couple of months or so.
I got the trigger beginning of January and the rail at the end of March.

Id imagine they will have something for the 4th.

>>30374864
Is there a Steyr there?

>>30374888
>Maybe I should take some pics of my horse with my AR :^

Only if you promise they are lewd :^

>>30374906
Oh.

Gay

>>30374934
Stainless bolt action might have a Steyr action, but the barrel is not. The stock? I have no clue.

>>30374857
damn that's cool, i guess i should add geissele to my slickguns filters

>>30374955
Not that anon, but thats a Stiller action, left feed right hand bolt, by the bolt release looks like a Viper.

File: DeathTo4Chan.jpg (903KB, 2433x2448px) Image search: [Google]

903KB, 2433x2448px

>>30375033
I see. I think you might be right. The whole gun was created in this dude's garage. He build's long range guns for fun.

>>30374831
I didn't really, I just thought I'd fuck with him.

Idk if I want a light for my ar.

>>30375101
Top kek

>>30372548
Dont know where to ask, what is the most Retro AR-10 I could build? Would it just be basically a big A2 style?

File: 20160622_002636.jpg (973KB, 2048x1152px) Image search: [Google]

973KB, 2048x1152px

Anywhere to get a milsurp Surefire M951 for non-rape pricing that *isnt* ebay? Didn't know if any surplus stores stocked them, not having much luck searching.

File: image.jpg (1MB, 3044x2448px) Image search: [Google]

1MB, 3044x2448px

>>30375089

File: 0ZD07772978-gr.jpg (3MB, 4755x6731px) Image search: [Google]

3MB, 4755x6731px

>>30374916
>mfw I played tracer well for once
feelsgoodman

>>30375120
I got mine for like $80-90 on eBay brand new, it didn't have a box just sealed in a bad.
Its legit and not a fake.

File: k frame BM .jpg (545KB, 1600x1111px) Image search: [Google]

545KB, 1600x1111px

>>30375127
Time to derail with handguns?

>>30375142
yeah i literally just watched you

File: 20160613_163942.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30375162
Yup!

File: 20160623_002912-1024x576.jpg (118KB, 1024x576px) Image search: [Google]

118KB, 1024x576px

>>30375127

Just put it down and nobody gets hurt

>>30375113
Find an extremely rare Sendra/Portugese AR10 parts kit or a rifle built one.

File: 20160613_163956.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>30375162
That is pretty nice. I've got a Taurus .44 tracker that I'm thinking about starting to carry when I hike. I've been carrying my CM9 but 6 rounds of 9mm is basically useless against a moose or bear.

>>30375163
Playing tracer?

What 308 gas blocks are receiver height?

File: USP9c_snow.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>30375162
About time.
>>30375142
Nice. I really need to play with you faggots at some point.

File: 20160423_152728.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>30375170
Woah. Trippy dude weed lmao.

File: 1463618915819.jpg (1MB, 3264x1754px) Image search: [Google]

1MB, 3264x1754px

Rape is cool.

-Nick 2016

Posted for TS

>>30374906
>bounce on my boy's dick

Someone watches Big Money Salvia

File: valor.jpg (360KB, 854x480px) Image search: [Google]

360KB, 854x480px

>>30375162
Sure, why not.

>>30375184
yeah i was spectating commenting on TS how much you suck

then you did alright

File: don'tmemeatme.png (27KB, 369x255px) Image search: [Google]

27KB, 369x255px

>>30375196
>Posted for TS
Bullshit, that's a ghost town now.

>>30375223
Haha
I played tracer in the match after that and did terribly
0/10 performance.

File: M&Ps.jpg (2MB, 1000x1585px) Image search: [Google]

2MB, 1000x1585px

>>30375225
I don't even know which one people use anymore

File: uglyblock.jpg (399KB, 1328x747px) Image search: [Google]

399KB, 1328x747px

>>30375204
I should buy more classic tupperware to abuse.

File: Faxon-STREAMLINE-Handguard-1.jpg (80KB, 1280x720px) Image search: [Google]

80KB, 1280x720px

any opinion on faxon 16" gunner barrel and their handguard? cant find anything on them.

>>30375089
>>30375127
>>30375170
as stupid as it may be to some, i miss these threads

>>30375127
what u eatin

Building a budget carbine

>Anderson lower
>Full Metal Tactical LPK
>Brownells mil spec basic m4 stock kit
>Anderson upper
>Anderson upper parts kit
>Anderson charging handle
>AIM BCG
>16" midlength Faxon pencil barrel
>Faxon gas tube and gas block
>Strike Industries J-Comp
>15" ALG EMR V3
>Daniel Defense fixed sights
>magpul m-lok handstop

Should I be good? What would be a good cheap light to add?

>>30375225
>>30375257
I'm in here with qb and Nick right now. Watching videos of motorcyclists beating up spics.

File: Imperial_eagle.jpg (20KB, 477x246px) Image search: [Google]

20KB, 477x246px

>>30375225

Hey you, I got a question.

When you had Tactical Gear Junkie do up those dust covers for you, what kind of image did you give them to engrave?

I ask, cuz I sent them shit like pic related and now I'm wondering if I fucked up.

>>30375322
Not sure, is the Polytac still king of the cheap but good 1" lights?

>>30375279
Barrel's good.

That handguard is ugly and I don't like clamp-on handguards, too easy for it to work loose.

>>30375279
I like my 12.5" faxon barrel, if that helps.
I've not gotten around to shooting it enough to pass judgement on accuracy, but there's someone here that got a limited run 16" .223 wylde (I think?) and they love it to death.

>>30375345
What alternatives would you suggest? I'm kind of stuck on MI's shit because I already have M-Lok stuff, and I don't see any reason why I shouldn't be able to transfer stuff between my rifles.

>>30375320
"Chicken parmigiana"

>>30375322
>what would be a good cheap light to add?
Grab a Surefire G2X off ebay for around $40-45 and put it in a cheap ring mount.

It won't have quite the throw of something like a 952+LED kit or a Surefire Scout 600, but it's better than any of the other weapon lights out there.

Plus, Surefire.

File: tenryuu is life.jpg (2MB, 2592x1936px) Image search: [Google]

2MB, 2592x1936px

>>30375328
it won't let mo connect for some reason
>>30375334
that should turn out fine

>>30375370
Which one you trying to connect to?

File: 51stEngrave.jpg (16KB, 310x269px) Image search: [Google]

16KB, 310x269px

>>30375370
>that should turn out fine

I fucking hope so, because I'm tired of seeing Undertale dust covers.

>>30375353
If you're not hung up on a super slim rail, in (or under) that price range you have:
>Aero (fat AF but solid). Aero has blem 15"ers for $71 right now
>ALG (mid-sized but solid. Lotta people thing they're uggo though)
Then for $150 you have the Mlok NSR from the NSR OEM.

>>30375379
>that price range you have
I"m actually a different guy who's trying not to torpedo his budget just because of the fucking rails

>$300 rails are a thing
Fucking why.

File: mutsu 240 nagato mk18 AR.jpg (421KB, 1600x1200px) Image search: [Google]

421KB, 1600x1200px

>>30375375
the not goyim one
>>30375378
that reminds me, I have to order my nagato and mutsu dust covers

>>30375363
Alright.

Where do you guys get your dust covers engraved? I wanna do a Trump one

>>30375425
>Where do you guys get your dust covers engraved?

Tactical Gear Junkie

>>30375394
Well, if you wanna stick with MLok, my personal favorites are the Geissele Mk8 (mid-sized) and the Aero (fat).

I've not handled that NSR copy yet but it's the Noveske OEM company so it's solid.

>>30375356
quoted cuz why

>>30375394
Also of note are the UTG Pro Slim for ~ $110

File: P3083618s.jpg (1MB, 1984x1488px) Image search: [Google]

1MB, 1984x1488px

>>30375398
I just want Iowa to get a figma
pls goodsmileco
pls
>>30375425
TacticalGearJunkie

>>30375435
>UTG

Breh. Srs? UTG??

File: 523201605822.jpg (531KB, 1218x1920px) Image search: [Google]

531KB, 1218x1920px

>>30375170
Just walk away and we can pretend this never happened.

>>30375439
The Pro is US made and actually decent though.

Sorta like how GG&G used to be airshit tier and then got their shit ironed out.

>>30375439
Yes seriously. The Pro series is made in Michigan.

>>30372548
How do y'all grease the outside of your barrel? Do you just use a nozzle or do you remove the handguard and get in there deep?

new thread >>30375460
new thread >>30375460
new thread >>30375460
new thread >>30375460

>>30375394
>Fucking why.
don't price a daniel defense rail.... you'll be mad as hell, also their weights are ridiculous.

an alternative to the noveske NSR is the erathr3 mlok rail. i'm fairly certain the same people make both. they're VERY similar rails

>>30375458
>grease
>outside of barrel
Why the fuck would you do that?