High Capacity Assault Clips Edition
Old >>30269452
>>30277546
>its an anon edition
The fuck guys?
>>30277546
>High Capacity Assault Clips Edition
I can get behind this.
Are anti-roll pins a meme?
>>30277566
You gave were too slow.
>>30277585
Fags*
>>30277583
If you have a 9mm, select fire or suppressed SBR AR, no.
Otherwise yes.
>>30277583
Yes but anti-walk pins are not.
Opinions on Anderson AM-15?
Why shouldn't I buy this charging handle?
http://aeroprecisionusa.com/ar15-ambi-charging-handle.html
>>30277542
Better, warp time space
Last time I picked one up I ended up going through a wormhole to another universe that lead me behind my daughters bookshelf in the past, present and future
>>30277557
All start
>>30277637
It doesn't look as good as other charging handles.
>>30277635
Build an AR instead.
>>30277635
Don't think you can get away without oiling it and have the same longevity or reliability as any other AR in the price range without their fancy coating.
gays
>>30277653
Raptor charging handles are the best looking fosho.
>>30277698
You should clean the shit off that lower.
someone convince me if i should sell this t1 or not.
i kind of want a kek acog but im not really sure.
>>30277710
you should get fucked
>>30277637
Because BCM ambi is only $6 more and a Raptor is only $5 more.
>>30277698
no u r
>>30277637
BCM looks cooler and is only a few bucks more.
http://www.bravocompanyusa.com/BCMGUNFIGHTER-Charging-Handle-GFH-Mod-44-AMBI-p/bcm-gfh-556-mod-a44.htm
>>30277728
No seriously it would look a lot better.
Someone say "high capacity"?
>>30277705
I've always had a hardon for badger ordinances, myself.
rate my new AR.
>>30277754
no seriously, go pay a large black man to fuck you
>>30277782
10/10
>>30277782
I hear it's really good at shooting people in Orlando.
>>30277682
If well oiled, what longevity & reliability should I expect?
>>30277753
Are ambi charging handles really all that special?
I just got a medium BCM.
>>30277782
Found the muzzie.
>>30277838
The ambi feature is useless for righties but good ones like the Raptor and Geissele don't allow your fingers to get pinched on the latch.
>>30277782
>media spends a day vilifying AR-15s
>it wasn't an AR
fugg
>>30277853
That Geissele one is very good-looking. Definitely my top choice.
>>30277801
>Stainless crush washer
>No sling mount
>No rail covers
>No surefire
>Non-USGI mag
>Airsoft stickers
Kys
>>30277883
For being a weapon portrayed as the bad guys weapon of choice, I can't remember the last mass shooting done with an AK.
>>30277912
you're kinda retarded, aren't you.
Anyone died since I've been gone?
>babysitting neighbors doge, is cute.
>>30277782
49/10
But it still looks like something that came out of my ass after a night out with tons of chili and beer.
>>30277908
Geissele is top notch. Their owner is almost autistic about getting things right, no matter what.
>>30277804
I...I..Is that what I think it is??
W..Why?
>>30277912
>>30277919
Let's just call it probability. Almost every gun shop has in stock 1000 ARs at a time and maybe a couple Century AKs.
>>30277817
Same as any other build with mil inspired but not necessarily spec components and an unlined barrel.
>>30277956
b-but muh 'kill every last motherfucker in the room'...
>>30277919
AK's are somewhat a novelty gun. Most AR's in todays market cost just as much if not less than a decently made AK so there really isn't any practical purpose to pick it over an AR for the same price.
>>30277546
in for i'm tired as hell, i must be getting old.
>>30277934
Is the Geissele SSA-E better as a mid-long range rifle trigger?
I'm putting together a 16 inch general purpose HD/range/anti-BLM-rioter gun, and I'm wondering what sort of trigger I can throw in it after I get tired of the stock trigger.
>>30277728
How well dose that rear diopter work?
>>30277919
In the US of A, only whiteys use the AK for mass murder, while mudslimes use the AR.
>really makes you think
>>30277753
I have that on my ar pistol I honestly think it's better than the raptor am I charging handle.
>>30277978
but it's so evil! /s
I agree. The AK is a range toy now or a secondary choice to a good AR at best.
>>30277782
You need to get a "black mamba" dust cover for it.
>>30277997
SSA or the Larue MBT are probably the best general purpose triggers out right now. the SSA-E is very nice but almost too light, you could make it work though.
>>30277996
I know a solution
>>30277937
For when my PTR arrives tomorrow.
>>30277997
It's awesome as a general purpose trigger. Some people think it's a bit too light and prefer the SSA / G2S, and they have a point, best try it out and decide for yourself.
>>30277996
Be glad that you are still working with your hands, going from being up in the shop all day to running a desk only accelerates the aging.
>>30278057
Larue MBT prices are based on how fast you want it
That is Jew shit right there
"I want my product sooner rather then later"
"Hehe, oy, that's $50 more"
Sbr idea.
12" 556
Geissle sd 3g trigger
Geissle mk 8 9.5" rail
Troy tomahawk butt stock. (mp5 style)
Adjustable gas block ( to be determined)
SilencerCo specwar brake
Troy flip ups
RDS os some flavor
Paint it rainbow color in remembrance of Pulse
>>30278072
your wife's fat ass?
>>30278078
desu, i'd kms if i had to work behind a desk.
>>30278094
>paying $125 for a product with a literally eight week shipping time
Yeah, no thanks.
>>30278106
>petite wife
>fat ass
Lmao. That's another charge I'm adding to your warrant, see you soon!
>>30278107
>paying more for the same product just to get it faster
Excpedited shipping that's $12 is one thing, but for that price I'm gonna save up for a guys-lee or an elfmann
>>30277782
Kind of gay
>>30278105
Existing lower? If not the CMT/Rainier lower is mighty sexy.
>>30277978
I own an SLR-107FR. I can definitely see the allure of a well made AK.
It's freakishly accurate despite its reputation, eats anything I give to it (including Tulammo), and hasn't failed yet even after neglecting cleaning. People can argue "muh mud tests" but I guarantee that if any AR on this general tried to eat the sheer amount of Tulammo that this AK has eaten without a cleaning, it would fucking gag.
I'm still very much convinced that, aside from dumping shovelfuls of mud into the action, the AK possesses reliability that eclipses the AR in many aspects, one of which includes ingesting less than ideal ammo.
That being said, the AR is a far better, more modular, and more serviceable rifle overall (fuck AK barrel changes/adjustments). Just the capability to swap uppers and calibers alone makes it superior, and the majority of the fuddlore poor-reliability issues have either been ironed out or completely debunked.
That being said, a well made AK, especially with some halfway decent optics, is an extremely effective rifle.
>>30278149
Yep existing lower. But that is pure sex.
>>30277546
What is that.... an assault clipazine for Star-Bellied Sneeches...?
>>30278181
Pls leave
>>30278181
Its a "10 round" magazine for ban states.
>>30277698
>Spurdo memes on a rifle
>>30278122
>Lmao
it'll be fat once i stick my dick in it.
>>30278181
hey, buddy, still to stupid to use a flashlight?
>>30278181
methinks a fun and exciting way to get your babby killer assault clipazine without any individual mag being illegal.
>>30278168
>shooting Tulammo out of any gun
>ever
>>30278289
What if you want to be ready for werewolves? :^)
>>30278324
>Zinc
>>30278348
Shhh the werewolves won't know that.
>>30278168
>but I guarantee that if any AR (...) tried to eat the sheer amount of Tulammo
Oh, do you now?
I have four factory made, mint condition USSR + Russian made AKs and two of them have stoppages while squeaky clean.
Meanwhile I clean my ARs on a biennial basis and last time I recall a stoppage were two FTFs with a beat up GI mag back in 2011.
>>30277750
is that a 3 hole lower? really nice build by the way
>>30278324
if you think that's silver
>have a bunch of golden bullets to sell you.
>>30278379
It was a joke. Hence the :^)
Also Tula worked fine in my AR and AK.
>>30278379
Kek
>>30278373
mmm..I love a filthy AR.
If you could build the next standard issue infantry rifle for the military, what would you build?
>>30278373
>two of them have stoppages while squeaky clean.
Bad rounds? Light primer strike? FTE? FTF?
Since the AR15 will be banned soon, what manufacturer should I buy from? Preferably in the $700-900 range.
>>30278375
Thanks.
No, it just looks like one
>>30278427
The current M4 is pretty good.
Maybe instead of the knights rail, have a FF rail of the same length
>>30278466
Build
>>30278466
Build your own. Buy a lower and get some BCM parts for an upper (or buy the upper whole if you don't want to hassle with that.
There's no excuse not to at least build the lower yourself.
>>30278427
Colt Canada MRR 15.7
>>30278466
You're behind the buyers curve already. You have tomorrow to buy before a lot of other panic buyers get their paychecks. Come Thursday things are going to get ruthless.
>>30278471
that picture is so dank
>>30278427
BCM RECCE AR
Trijicon accupower 1-4
Surefire light
B5 enhanced Stock and grip
Geissele SSF
DBAL
BCM stubby or standard VFG
Id have it to you could use your own AR/optics/accessories if you wanted
>>30278476
>>30278486
shit fellas i am a normie i dont have time for that
>>30278466
Buy ten stripped lowers, then. All the rest is just parts that can be legally mail ordered.
Given you can use any variant of either of these rounds, whether commercial or surplus, which of these is generally more devastating at close range?
>>30278520
If you can build legos you can build an AR
>>30278453
Tula AKS-74u has FTFs with surplus 80's 7n6.
Izhevsk AKM has FTFs (nosedive into ramp) with a variety of surplus M43.
Both with different milsurp mags in a good shape, not some aftermarket shit.
>>30278520
If you have a half hour and some very basic tools then you can do it.
>>30278218
A pencil is not enough to do that to my wife, sorry
>>30278523
5.56.
No good hollowpoints exist for either x39 round. Good ones do exist for 5.56.
>inb4 someone links me the Wolf/Tula "JHP" that doesn't actually expand worth a shit
>>30278523
5.56 is better for close range
>>30278523
556 is more devastating at all ranges. 7.62x39 "stopping power" is a myth.
>>30278559
>No good hollowpoints exist for either x39 round
These things are brettygud senpai.
https://www.youtube.com/watch?v=IIFkLAgGy6w
>>30278520
Ruger AR-445
S&W M&P Sport II
Windham Weaponry whateverwhozit Academy sells
Colt 6920
>>30278559
Hornady makes some decent ones. Lots of manufacturers do.
But with readily available ammo, 5.56 is better at close ranges. Except M855. M855 is trash.
>>30278554
If I bought a lower, what are all the parts I need for the rest of the AR15? Do I buy a complete upper?
>>30278582
>no good hollowpoints
B-BUT THIS SOFT POINT IS OKAY!
Still inferior wound cavity at short range to a 5.56 monolithic copper hollowpoint, and tbqh inferior to many 5.56 JSP's
>>30278559
>what is Cor-Bon 123gr DPX
>>30278555
that explains why her ass ain't fat. LMAO
>>30278601
unobtainium $9/rd gimmick ammo that got pulled from the market for being overpressure?
>>30278598
If they're so good compared to 7.62x39 soft points, why are they illegal to hunt deer with in so many places while the x39 is?
>>30278588
>Hornady makes some decent ones
Not hollowpoints. The SST is "okay" tier by JSP standards as well and *still* inferior to many other JSP offerings in 5.56 as well as *all* good JHP offerings.
>lots of manufacturers do
Start listing them.
>>30278592
Stripped lower, lower parts kit, stock and buffer tube kit, magazine. Then buy a complete upper from a reputable brand. You may need to buy a bolt carrier group and charging handle if not included with upper.
>>30278634
Fuddlore, 5.56 will take a deer no problem.
>>30278634
Retarded lawmakers.
>hey you can legally hunt deer with .25acp mouseguns
>don't you dare use a centerfire rifle round that's not at least .25cal!
>>30278634
Because fudds can't into SCHV.
5.56 is fine for medium game.
>>30278559
raperaperaperaperaperaperaperaperape
>>30278635
Sako, Corbon to begin with.
Winchester and Norma only make SPs which aren't good enough for you.
>>30278613
>barnes projectiles are a gimmick
I have no idea on availability of the Cor-bon only that they list it, but the barnes projectiles are fantastic.
>>30278667
>want to go javelina hunting
>can't decide between my AK or my AR
>>30278669
>reading comprehension
>you don't have it
>>30278719
I'd take the AR with a magnified optic, you'll really appreciate it out in the wild.
>>30278695
No, the Barnes bullets aren't a gimmick. They're specifically what I consider the best defensive bullet going.
But that particular Cor-Bon load got pulled for grenading AK's because it was overpressure and they were literally the only factory ammo to load a Barnes bullet for 7.62x39.
assault clips
>>30278634
Really though, most people who use 7.62x39 for hunting use Russian SP/HPs that generally don't work at fucking all on account of the bimetal jacket holding the bullet together and the hole being made as an afterthought literally because there is demand for them in the US / west. Even around here people torture game with shitty cheap S&B and Barnaul ammo because they're too cheap to spend more than 30 CPR on the five rounds they use every year. Hell, they're too cheap to zero on the range, either, so you'll find traffic signs with holes in them in just about every rural town.
>>30278742
Looks like Double Tap is loading the TSX as well granted at ~$2/round but I expect nothing less of DT.
Aero precision 16 inch upper. Yea or nay?
>>30278803
That's good news.
>granted at ~$2/rd
That's pretty much in line for Barnes bullets of any caliber though. Hell they want 70-80 cents for just the bullet as a reloading component.
>>30278807
Hell yeah. You won't regret it.
>>30278776
I believe it.
Honestly though if I was hunting and too poor to afford a good .30-06, I'd at least have the decency to splurge on a good box of hunting ammo, and spend a little time zeroing my fucking rifle so I don't shoot it in the gut and have to put it out of its misery with its bloody entrails hanging out.
Personally though I'd still be apprehensive about using 5.56 for hunting something deer sized. Elk would be out of the question, but even then I'm feeling iffy about 7.62x39.
What would you personally use for deer blasting if 5.56 is legal to use in your area?
>>30278807
Go for it man.
>>30278849
I'd be confident in 5.56 at stalking ranges before it bled off too much speed, and I have no qualms about 7.62x39 with a good bullet since I grew up shooting a 30-30.
>>30278867
>>30278807
Thanks, guys. Now it's just a waiting game. Gotta love it when they're out of stock. :-/
I want to get/build myself an ar. Where should I look to learn about the various parts and how to pick parts?
In other words, how do I get gud at building gud rifle?
>>30278885
I second this. I grew up shooting a single shot .243 with a 14 inch barrel. Took many a deer with it. Coyotes and nutrea rats didn't fare any better either. If I was shooting durr, I'd personally go with a bolt action .223, but an AR is perfectly fine. I've taken a few with the 5.56. Completely doable.
>>30278849
As someone who's hunted deer for over a decade with 5.56, any of the following work:
>Winchester 64gr PSP
>Federal Fusion/Speer Gold Dot/Federal LE Barrier Blind 62gr BSP (same bullet and load, different case)
>Barnes TSX/TTSX/Tac-X/Tac-TX 55gr and up
>Hornady GMX 55gr and up
>Remington Hog Hammer (Barnes bullet) 62gr
>Winchester Razorback 62gr
And if you're trying to save a few pennies, you can frequently get either Fed Fusion or Fed LE barrier blind in the ~60cpr range.
>>30278917
YouTube, the Internet, books. Look up "building an ar" on YouTube. I think A Regular Guy has a video about building an AR. "Building a Rocketship AR" maybe? Don't remember too much. It's good information.
>>30278917
There are any number of books on the topic. Here's one:
https://www.amazon.com/Build-Your-Own-AR-15-Rifle/dp/1452830290
Also go to midwayusa.com and bookmark their gunsmithing videos visa-vis the AR. He's Larry Potterfield, and he'll tell you how it is.
http://www.midwayusa.com/video
>>30278849
You seriously overestimate Euro hunters. They're a bunch of >muh hunting kulture
faggots who get shitfaced on cheap liquor, then proceed to shoot three of their own before they manage a gut shot on anything with 2+ legs.
But fuck if they're gonna tolerate any rifle made after 1960, or anyone who isn't 60+, wearing their uniform and talking in their jargon.
>>What would you personally use for deer blasting if 5.56 is legal to use in your area?
I would probably handload some 65gr Gamekings simply since they're readily available around here, and not too expensive so I can afford working up a load.
>>30278934
Any word on how the 64-grainer Nosler Accubonds do on deer and hogs and so forth...?
>>30277919
Maybe the dune coons finally realized after getting lit the fuck up by it for the last decade the AK is shit.
>>30278867
How do you like that new Vortex SPARC AR? I seriously considered getting one, AAA batteries is nice. I just wanted a QD mount right away, and wasn't willing to wait for one to be released.
>>30278991
I would expect well but I haven't tested them personally.
I also forgot the 64gr Nosler Bonded. I've only used it in handloads but it performs extremely well.
>>30278934
I just use a 75 gr Hornady OTM over 25 gr of Win 748, going ~3k FPS in my 24" precision AR.
>>30279036
I read a lot of people having good luck with the 75gr Hornady. However my state specifically specifies "expanding" bullet so hunting with an OTM is illegal.
Yet I can use a .25acp JHP.
>>30279036
I know I've said it before but that is fucking screaming for 75gr.
>>30279061
slow powder, lots of barrel. It's usually more like 2950, but I have the occasional round break 3k.
After I run out of powder, I'll probably switch to a more optimal powder and see some more velocity--I was just using Win 748 bc I had it already from loading 7.62 NATO loads for my Ishapore 2A Enfield. All things considered, it's a legacy powder.
>>30279036
holy shit haven't seen you in forever... Have you run CFE223 in a 308? I'm getting like 2900fps out of a 26" with a 168hornady BTHP...
>>30279029
I've only taken it out once, but here are my initial impressions. It seems well built, heavier than I assumed. It was really easy to attach to the rail and zero. Using AAA batteries seems convenient. The rubber casing around it doesn't seem like it does much, and the lens caps are mildly annoying if you want to get them off quickly. Overall though, for $200 I'd recommend it.
>>30279086
Unless you're loading a bit over book max 3k fps is pretty much the upper limit for mag-length 75gr Hornady's, at least according to Quickload with the COAL set at 2.265"
>AR-Comp @ about 2910fps
>Varget @ about 2920fps
>CFE-223 @ about 2990fps
>8028 XBR @ about 2920 fps
I mean, most guns can handle it, but you're really pushing things.
>>30279129
I JUST got some 2000 for 308, I'm switching to 175 gr SMK and supposedly it's the perfect powder for that.
>>30279146
Sounds about right. I got the standard SPARC due to the mount options. I really like ADM mounts.
>>30279149
Oh I'm getting partially flattened primers and clear extractor smears. I'm on the ragged edge. Are you computing in Quickload with a 24" stainless 1:8 twist barrel?
>>30279171
24" stainless yes, haven't looked at twist rate. Gimme a minute.
>>30279182
>>30279171
Still had it set to 1:11.25 for my .308. Changing it to 1:8 actually shaved about 4fps off all those numbers.
>>30279201
When are prices going up after this latest shooting? Should I buy more ammo and magazines now or wait
>>30279201
Still pretty close to what my chrono gives me in the real world: generally about 2950, with the occasional hot pill knocking on 3k (2990s)
>>30279212
You should always buy more ammo.
IMO you should also buy more mags if you have fewer than 15 good, quality mags.
>>30279226
Right.
Do you chrono with your can on? That'll buy you a couple dozen fps usually.
>>30279248
Always. No reason not to use it.
>>30279248
Also, if you're looking to switch powders, CFE currently produces the best velocities. I've not really liked my accuracy results with it though.
My 2 most accurate powders have been H322 (which is pretty down there on velocity), and 8208. I mainly load H322 because it's pretty easy on internals.
>>30279258
That probably explains the discrepancy between QL and your chrony. Gonna change to a 25 or 26" barrel to approximate the can, gimme a minute.
Does anyone have a can cannon? Is it fun? https://www.xproducts.com/can-cannon-soda-can-launcher-ar-15-m16
>>30279233
I have 1000 rounds (steel) and 4 pmags. I just put together my first AR 3 weeks ago thankfully before all this happened. I do t have that much money atm but I just want to be safe.
I haven't been in the gun market when something like this happens.
Should I pay extra for a QPQ treated gas block and tube?
Has anyones tube/block ever rusted?
>>30279271
What do you load H322 to? I'm loading a 75 over 22.1gr H322 with very good accuracy but like 2600fps which sucks at 600+ yards.
>>30279302
mines rusted on and ive never had a problem
>>30277546
Jesus Christ. What is that? What the fuck is that?
>>30279302
no
>>30279271
I think paths has quick load too...
You guys think panic buying will jack up the prices on upper receivers and ff rails? Will waiting for 4th of July sale help at all or make it worse?
>>30279036
Do you really have a fucking 3x magnifier for your 3x9?
*bangs head against wall*
>>30279302
no
no
the standard tube lasts as long as the barrel
in fact the barrel will overheat and burst before the gas tube
literally the only way to kill the gas tube is a massive magazine and nonstop fullauto
are you really worried about getting it wet
>>30279271
Alright. Split the difference at 25.5" barrel. All listed loads are as close to Pmax as I can get without going over at tenth-grain increments.
>22.6gr AR-Comp
2977fps
>23.9gr Varget
2940fps
>25.5gr CFE223
3023fps
>23.0gr 8208XBR
2942fps
>24.6gr Ramshot TAC
2931fps
>23.8gr Ramshot Xterminator
2923fps
Not gonna test VihtaVuori powders, they're still scarce and outrageously expensive.
Also, since I'm still on QL 3.6 I don't have data for stuff like Alliant MR2000. That has potential.
I want to build a 300 blk upper with a 9 to 10 inch barrel, and I would like to be able to have a suppressor on it. My question is, what length of free float handguard cam I get without getting in the way of a qd suppressor? 7 inch? 8 inch? I was thinking something kinda like this picture I pulled off of google, with a small gap between the handguard and suppressor.
So I have 20 PMAGs total. Each had for $9.99.
Can good GI mags be had for that price?
>>30279314
21.4gr with a 77gr SMK w/ cannelure, which is a hair under book max. It's a 3/4 MOA load through my 20" rifle, and chrono's at just over 2800 with very low SD and ES.
I've shot it to 800 with decent effect, though I'd probably do better if I could read wind better. I'm switching to TMK's when I get through my last 500 SMK's
>>30279355
>Can good GI mags be had for that price?
definitely
>>30279332
>magnifier
>>30279339
Those CFE223 numbers have piqued my interest.
Why do we allow anons to start threads
>>30279332
That's night vision bro
>>30279381
kek
>>30279381
Senpai don't blame me because that anon who started the new thread is a tard.
>>30279338
I am not worried about it exploding with heavy use, I am worried about it turning orange and destroying it's aesthetics and maybe breaking down early due to rust.
I live in a humid climate.
I still can't see this thread in the catalog
namecalling is not helping.
>>30279378
>>30279332
Sometimes I even wear my magnifier on my head to make far away stuff look more closer.
>>30279412
Its your money. Waste it if you want.
>>30279366
Where at famalam?
In for Liberalism is a mental disease.
>>30279341
In order to clear most suppressors/mounts you want a rail 1" shorter than your barrel.
This is my 8" 300blk with a 7" handguard for reference.
>>30279441
PSA routinely puts their GI mags with tan followers on sale for $7.99 a pop.
>>30279441
PSA.
D&H aluminum mags with anti-tilt followers frequently on sale for 7 bux.
>>30279339
Can you get me peak pressure for a 168gr hornady bthp with 45.5gr8 cfe224, S&B lrp out of a 26" 1:10 308 steel barrel normal rifling? I chronoed at about 2780fps and it was a little sticky. Hodgedons site had some pretty high pressures for max load...
http://www.nydailynews.com/news/crime/firing-ar-15-horrifying-dangerous-loud-article-1.2673201
am i the only one that feels physically ill after reading this article
>>30279447
>not hanging your qts from your raifu
>>30279341
>>30279448
10.3" with a 9" rail
>>30279448
I've been browsing 300 blk uppers recently now that my 7.62 can is on Form 4.
Can't really decide on a barrel length. I like 10.5" for performance with the 125 gr supers when I hunt, but desu the whole reason to own it is as a suppressor host, so I'd be shooting subsonic 99% of the time. Therefore a shorter barrel might make more sense.
Doesn't work well with statueshit.
postan
>tfw you made some bad decisions and your payroll guy basically died so you don't know when you'll be paid next
Whenever I get around to SBR'ing this thing, what stock should I put on it?
I'm thinking B5 or something?
>>30279423
Fuckin Mei
>>30279447
But if AR-15's were illegal, how would the gunman have killed so many people?
Problem athiests?
>>30279484
the new MOE SL-K stocks look like sex to me.
>>30279463
>"journalist" goes into a range already not liking firearms
>doesn't like firearms
Woah.
>>30279448
>>30279469
Thank you.
>>30279457
You're at 50,189 PSI and 2713 fps according to quickload. Pmax is 62,000 PSI.
Looks like QL is pretty close to what your chrono is saying (default 58* @ 500ft asl), so I'd say it's a cold load and shouldn't be sticking. Check your headspace.
>>30279408
>all anon are samefags
Can someone tell the cucks on facebook to stop their shitty kneejerk reaction to anything I post even remotely related to guns?
>>30279475
I went short since I have the .308 for harvesting, the .300 is soley for a subsonic toy.
>>30279548
you know what to do
Hey /ARG/
I have some money to spend, what should I pick up as an investment. I was looking at the le6920 or M&P 15.
>>30279463
>It feels like a bazooka — and sounds like a cannon.
>Bazooka
>Recoil-less anti-tank rocket launcher
>Canon
>Makes noise
Surprisingly accurate description of an AR. :^)
>>30279504
Ooh I hadn't seen that, it looks pretty nice.
And it can accept a QD mount, which is nice.
>>30279548
Did you post that picture?
Screencap what they said.
>>30279542
Thanks. I'm thinking it's because my ejector is a little pitted from blowing out some primers before and it's just harder to lift the bolt handle.
>>30279569
>what should I pick up as an investment
Right now? Stock in Chinese steel foundries.
Put some Fagpul shit on my rifle, I'm actually pretty happy with it, I think I've finally come to a stopping point with it. I'm going to build a nicer AR within the next 4 or 5 months.
Does anybody on /ARG/ ever question their beliefs when it comes to gun control? Sometimes I sit and wonder if I'm on the right side of the ideology, especially after crazy shit goes down like in Orlando.
Will somebody reassure me that gun control is retarded?
>>30279561
yeah, on the same note I have a 308 too, and it'll easily shoot subsonic loads as well thanks to Trail Boss powder.
>>30279569
If strictly for resale probably a colt
People are loyal to colt for no reason other than the word "colt" so it will probably resale well
Rate the build I am putting together:
5.56 NATO
BCM 14.5" upper, mid-length w/ fixed A2X flash hider
BCM BCG
PSA milspec charging handle
PSA stripped blemished lower
BCM enhanced lower parts kit, FDE
Magpul MOE milspec stock, FDE
Rainier Arms milspec buffer tube kit
Magpul MOE handguard mid-length, FDE
Troy Industries fixed rear sight, FDE
Handful of pmags, black, 10 round (because Colorado)
This sling: https://www.amazon.com/gp/product/B00JK1XW4G/ref=od_aui_detailpages00?ie=UTF8&psc=1
Pic unrelated
>>30279587
>Will somebody reassure me that gun control is retarded?
If he didn't have access to a rifle, it would have been just as deadly if he used a gasoline bomb or pressure cooker.
The gun made no difference, it was just the tool he chose to carry out his plan.
>>30279594
>have a colt up for 800 for almost 2 months now
>hurr buy a colt you can always resell it for a thousand immediately!
>>30279499
Islam is also a mental disease.
>>30279599
>Troy anything
>blemished lower
Fix those and your OK
And maybe an optic
>>30279590
Red Dot does the same thing and is cheaper. Also much more researched.
>>30279599
Also dumping Peter rabbit
>>30279590
what kind of 308 do you have?
fellow ohiofag here, what do you think about the LSS system. I want to buy one but I'm worried that my B5 sop mod stock will not be stable enough of a cheek piece.
>>30279587
>Does anybody on /ARG/ ever question their beliefs when it comes to gun control?
no
>Will somebody reassure me that gun control is retarded?
hillary supports gun control and so does a fat feminist
>>30279587
>Will somebody reassure me that gun control is retarded?
Do you want me to start dumping infographs?
>>30279463
>How to hold AR?
We can just write about things without knowing anything about the subject? I wish I had those standards when going through college.
>>30279599
>BCM 14.5" upper, mid-length w/ fixed A2X flash hider
If you're going to pin/weld a muzzle device, make sure it's compatible with a suppressor you might buy or use one day.
Also, get a BCM gunfighter CH, it's worth it.
The MOE stock is meh, get a CTR or MOE SL at least.
No reason to get the Troy rear sight, it's pricey. Get a matech or MBUS.
Don't skimp on the sling, get a magpul MSx. It's literally the interface between your body and your rifle, and what your investment hangs from.
>>30279599
>>30279618
>>30279610
you ok?
you seem extra effected by the terrorist attack.
>>30279587
People will always try to harm you just because they can. There is evil in this world, and no legislation can remove it. The only true defense is what you can provide yourself or can be enforced through the perpetuation of an armed society.
>>30279634
He's young and impressionable.
>>30279587
Gun control is retarded. Guns aren't the problem, and even if they were, building a decent submachinegun out of common hardware store objects is easier than growing decent weed.
>>30279300
You need mags but don't spend too much. I'm waiting on PSA 4th of July sale. They might have $7 mags by then.
>>30279605
I sold my 6920 for $1400 during the holiday season. Perhaps your listing is not as convincing as it could be.
>>30279616
Trail boss can't be double charged though. And even if you do exceed your charge, it won't KB.
Low volume loads make me nervous.
>>30279619
Mossberg MVP. The chassis is nice, but don't be fooled by the name. It's fucking heavy. Not really suitable for hunting use in my opinion.
>>30279599
>>30279618
>>30279633
>>30279632
I thought about the Gunfighter charging handle, but I'm a milfag reservist and don't want to get used to something with ergonomics too dissimilar from the M4.
>>30279573
I mean, I can screencap, but it's like 8 gorillion words
>>30279654
>>30279670
get the medium latch, the controls are no different, and it's a MUCH better made and reliable piece of kit.
>>30279599
Skip troy fixed rear.
Ive switched from varget to TAC for my ar loads.
It throws fantastically in my hornady LNL.
>>30279655
No sales this year my friend. Omar made sure of that
>>30279590
What stock/chassis is that? I just ordered a KRG X-ray for my Tikka.
>>30279670
The mod5 latch is basically the same size as the latch on a GI ch.
>>30279612
Literally no visible blemish, I bought two lowers and they're sequential serial numbers so I suspect they're not even blemished
>>30279692
MDT LSS
Additionally, since it's a Mossberg MVP, I use 308 pmags, so I can load up to 25 rounds. It's a hoot.
what the worst gun control debate you've ever had in person?
mines in high school with my criminology teacher lasted about 40 minutes and i won.
i almost started crying i was getting so passionate
>>30279658
I don't plan on hunting really. Just paper and ground hogs, I want something solid, accurate and handy/compact. I need my other hand to carry a small cooler full of grape and orange soda while ground hog hunting.
>>30279604
>>30279620
>>30279624
>>30279642
>>30279654
Thanks guys.
>>30279713
>i almost started crying i was getting so passionate
gay
>>30279594
I was thinking of Colt for that reason, but they seem to have had some financial troubles. But there seems to be brisk trade in both brands.
>>30278511
You can spring for optics and accessories
>>30279604
A zippo and barricading the doors would have killed a lot more desu
>>30279713
>almost started crying over guns in a school
>won
Yes fluffbutt, you "won".
Definitely had nothing to do with prevention of any type of incident involving the firearms you have such an emotional attachment to.
>>30279713
>i almost started crying i was getting so passionate
i can only imagine how pathetic this scene must have been
>>30279692
You're really gonna enjoy that setup desu
Me in nebraska killing p.dogs
>>30279762
kys lmao
>>30277997
just get it, you will not be disappointed or even care.
the only thing you should be concerned about is if you like 2 stage triggers or not because it is a 2 stage trigger.
>>30279679
Maybe I will. This stuff is all already ordered, but I should be able to sell any parts for like 4x current price if Hilldog gets elected.
>>30279682
Why?
>>30279768
Waiting on my MPS BA chassis for my 6.5creedmoor howa 1500
>>30279768
Are you using the G2 reticle on that Bushy?
One of my favorite all time reticles. The Vortex tree reticle is decent, but the Bushy is better.
>>30279724
agreed, emotional appeals are for criminals and teenagers
>>30279724
tell me more about the LSS, should I buy a mag-pull stock with the riser or will my b5 sop work?
>>30279724
>gay
>>30279769
https://www.youtube.com/watch?v=H7Wy49bWSfA
>>30279672
I'm curious, senpai.
>>30277997
The ssa is good , the DMR or NM is a little nicer
>>30279796
>6.5creedmoor howa 1500
You did good Anon.
I had a Howa 1500 Targetmaster in 308 riding a B&C medalist stock, and that setup would print clover leaves all day with 168 gr FGMM at 100 yds.
It was the best shooting rifle I ever sold.
>>30279777
a feeble attempt
>>30279801
You'll definitely want a riser. It's almost required.
>>30279762
There it is
the snarky qb post, we have not seen one that snarky in a while and I was assuming it was not coming but there it came.
WOW you have really outdone youself qb, I am in awe from your snark. You have caused me to regret my inability to produce such snark on demand in an endless flow such as yourself.
Knowing you I will probably receive a snarky remark such as "kys"
But I post this knowing as such because I love to receive your snarky blessings.
Oh how I long for such snark at the end of a long work day. I love getting home from work to talk about AR15s and being assailed by your overflowing levels of snark, my day would not be complete ,NAY! my life would be empty without such snarkiness to fill my snarkless existance.
I think you oh snarkinator for my daily dosage of snark from your bottomless recesses of your snark glands, oh how sharing you are with your bountiful gift of snark.
I hope your snark continues for many more generals to come until the snark death of the universe.
https://petitions.whitehouse.gov//petition/disregard-petition-ban-ar-15 please sign
>>30279844
3/10, stale
>>30279798
Yea, it's an awesome reticle.
>>30279829
i like the way your lips look like a puckered asshole. carry on.
>>30279808
The little pups didnt explode like that . but the adults they fucking turned inside out.
I was using 50gn vmax.
scope is a 3-15x swfa ffp.
My advice for anyone doing a dog hunt, get a swivil bipod that is long enough to be used in a seated position.
How would you finish it? (no tax forms)
>>30279888
by slapping >>30278931 on it and painting it red
>>30279810
I'm red, and yeah, my grammar and spelling is fairly shitty
>>30279888
10.5" CHF upper from PSA, Aimpoint PRO, your choice of goodies after that (sling, hand guard, buis, etc.)
Pretty much my current SBR setup.
I'm putting together a pistol build, and I intend to put a KAK shockwave on unless someone has a better suggestion. My only question is this: KAK makes a distinction on their website between a carbine QD endplate and a pistol QD endplate. Is there a difference? I assumed an endplate was an endplate for the most part.
>>30279910
Fucking Australia ate my picture.
>>30279861
that's fluffy bottom
he posted it a while back when he was having an autistic fit, and told everyone he was going to do it.
>>30279842
Thanks for that, so other than saving 100$ why should I get the lss over the HS3 or the LSS-XL?
>>30279713
Fluffy, why are you such a cum-feasting boondoggle of an attempt at humanity? You are a rail-mounted fedora. You make me want to knock a chick up so can name the kid Fluffy Bottom and then force her to abort it.
You are a fire-hose of nu-male douche.
>>30279948
The HS3 is uggos and heavy
The LSS-XL's extra length is basically useless, and adds unnecessary weight to an already chunky chassis.
>>30279851
where the one to ban the ar-15?
>>30279987
https://petitions.whitehouse.gov/petition/ban-ar-15-civilian-ownership
>>30279987
I WANT TO PUT DOWN THE ASS HAT BAN, I WANT TO KEEP MUH AR
>>30279910
Thxfor input I'm looking for ideas for first pistol build
>>30280004
youve got a pretty mouth.
>>30280019
kthx
>>30280017
10.5" is the shortest you can go and still use a can, so I wouldn't go under that, even on a pistol.
I had a 7.5" AT pistol, and the flash and concussion are absurd, and the velocity is crap.
>>30279634
I'm very afraid of gun bans.
I will not be cucked like the rest of the world.
>>30280031
youre more than welcome sweetie.
You people should not be allowed to own army rifles.
You should need background checks for all of your other firearm purchases.
Also mental evaluations and registration.
>>30280038
Kk. Very good to know. Prob won't get a can soon, but would love one ...or five. Likely staying 10.5" or greater
Yes or no
>>30280038
>10.5" is the shortest you can go and still use a can
http://www.surefire.com/socom556-sb2-2.html
>designed specifically for 5.56 rifles with barrels shorter than 10 inches
>>30280064
lol
>>30279908
ily bb
Ill read it once I'm done doin overwatch
>>30280080
Sig red dots are garbage. Avoid.
>>30280086
Fair enough.
Most STANDARD cans won't let you go shorter than 10.5"
>>30280080
looks cool but id rather get a pa advanced md. atleast there are other people using the PA one and a great warranty. not to mention 50k battery life and uses ap micro mounts
>>30280038
Since that is out of stock, any idea about what it costs?
>>30280103
>>30280086
>17 oz
Also, holy shit that can is chunky.
>>30280110
I think they're ~$350ish shipped? It's been a while.
>>30280089
See, we need to stop fat autistic people from owning weapons meant to kill commies.
New to this, should I bother researching the components to build a rifle or just buy a kit off of PSA for like $560 and assemble it? Finally decided to buy one of these before it gets expensive/harder to aquire
>>30280129
But then what would /k/ talk about?
>>30280130
You won't go wrong that route if it's your first gun.
You'll be mixing and matching parts for the next year anyway.
>>30280130
You should vote for Hillary in November to stop all of these mass murders.
>>30280130
For a basic rifle where you plan to replace nothing or very inexpensive components, a pre-built PSA upper and/or lower is a cost efficient option.
>>30279971
Do you know anything about the folding stock adapter? Its cool and would be great for my needs, but stability and accuracy comes first. My dad and brothers will call me a faggot if anything is wobbly or rattles. Or If I show up with mag-pull.
inb4 mag-pull is great
ww2 & Korea gramps will hit me if its typical mag-pull pleb type gear.
>>30277782
is it 300 blackout?
>>30280129
dis machin kills comunis
>>30280151
You should end your life you leftist shit canoe.
>>30279713
Never really had a gun debate. Usually just some person making some uneducated statement on firearms and their laws, and when I refute their point they usually just use some shitty cop-out "Well I don't know about that man, I just don't see the purpose for guns".
>>30280142
How to properly maintain and use weapons for hunting and sporting purposes?
>>30280159
The CTR's clamp is pretty tight.
You could get an adapter that lets you put a PRS on it though if you want solid.
I never messed with the folder.
>>30280163
That's not an argument, you have literally no reason to justify owning these weapons and them being available is leading to mass murder and easy access for homegrown terrorists you people ostracize and create.
>>30280124
Right on.thx
>>30279381
tripfags are literally the worst thing to happen to 4chan
>>30280183
>investigated by the fbi twice
>contracted by the Feds as an armed guard still
>somehow it's the guns fault
kys
>>30280038
>10.5"
autism but still, 10.3
>>30280124
stop fat shaming, shitlord, you just can't handle a REAL can.
>>30280199
>autism but still, 10.3
Depends on the can. YHM only rates down to 10.5"
>>30280194
Literally would have been unable to shoot them if the gun was not available.
>>30280148
>>30280158
Thanks for the help lads
Would something like this be decent enough quality? Looking for something light
http://palmettostatearmory.com/16-mid-length-light-weight-chrome-lined-premium-rifle-kit.html
>>30280213
So he brings a can of gas and a zippo into the club. Or pipe bombs. or a pressure cooker bomb. Same result.
The gun makes no difference.
>>30280224
The perfect setup imo. You'll love it.
It's perfectly functional as it is, with lots of room for improvement.
>>30280213
Who is 'Literally'? And they could have used an mpx
>>30280213
wouldn't have happened if we just killed all the muslims, amirite
>>30280227
>>30280163
why are you idiots actually swallowing bait
Sure it does, he cannot shoot them and it limits options for murder at no cost to society
>oh no people around the country can't shoot people hundreds of yards away anymore
People can run from fire and bombs have a limited radius
a man with a rifle can shoot and shoot and shoot until the police come to stop him and then he puts them in harms way.
>>30280224
Fine choice imo
>>30280254
Make bigger bait
new thread >>30280269
new thread >>30280269
new thread >>30280269
>>30280272
always counter bait
>>30280241
>>30280257
Great, I appreciate the advice
>>30280174
thanks for the knowledge pog, maybe i'll be able to thank you in person if we ever do a decent /k/ meet up.
>>30280301
I don't mean pog as in hobbit cunt, just like the the letters of your trip lol.
>>30280256
Good, I love that shit.
>>30277546
could you simply just stick 2 rifles onto that rotary mag and dual weild them?
>>30279908
My brian hurts
>>30279888
I finished mine like this
What's the shortest barrel I can use for a suppressed 300 blk pistol?
>>30279908
>Lefty mentions Paris
THEY HAD FUCKING GRENADES, ALSO, IN PARIS, YOU STUPID FUCK.
If I were, hypothetically speaking, a college kid about to finish Army ROTC and commission into a support job, would I be more likely to be issued an M4 or M16, and what kind of AR should I get or build to practice for it (preferably a stock model but would consider getting parts, just don't have much time to git gud)? I'm not a great shot but all I've got to shoot so far was old bolt actions and shotguns. I really would like to have an AR but there are so many options I don't even know where to start
>>30279908
never engage in pro-gun debate again
you are fucking retarded
"furthermore the mini-14 can carry the same size magazines"
you know what nogun antigun retards see when you say that?
cringe.
>>30280707
Why not 5 rifles?