AR Thread/AR General/ARG

Too soon, junior.

>>30174022
311 kys

File: image.jpg (1MB, 2997x2247px) Image search: [Google]

1MB, 2997x2247px

Chuck Taylor's are for fags and blacks

>>30174027

Nice stainless barrel. Get a job.

File: me.jpg (21KB, 500x501px) Image search: [Google]

21KB, 500x501px

>>30174013
in with my numaleness

>>30174039
nu-male is best male.

>>30174035
i have a job

File: image.jpg (2MB, 2250x3262px) Image search: [Google]

2MB, 2250x3262px

In

File: 10527898_1452413575034095_2816421141396775880_n.jpg (36KB, 480x387px) Image search: [Google]

36KB, 480x387px

>>30174042
wink

File: 1464923575207.jpg (569KB, 2048x1365px) Image search: [Google]

569KB, 2048x1365px

Am I dumb for putting a magpul moe fixed A2 stock on an ar10 rather than a luthar mba-1 to save some weight?

Ideal uses would be 95% bench shooting and hopefully 5% hunting.

File: 1465097261995.png (192KB, 1366x728px) Image search: [Google]

192KB, 1366x728px

>>30174028
>spending 1200 on an optic to put on a non free-float ar

File: DSC_7931.jpg (1MB, 2400x1600px) Image search: [Google]

1MB, 2400x1600px

>>30174065
no.

File: 6-4-16 noveske can.jpg (327KB, 2084x720px) Image search: [Google]

327KB, 2084x720px

>>30174013
in for noveske a shit

Should I get a 9 or 9.5 barrel?

Which is more a e s t h e t i c?

Or do I get more animu figs?

>>30174084
10.3''

>>30174068
>Implying M4's have a freefloat

I did the same, I don't give a fuck, it works just fine.

>>30174077
At least your sled and scope are working for you.

Glad you followed my advice.

Do you at least feel better?

>>30174042
>>30174039

I can't wait for emperor trump to round your like up and hopefully you will learn to be a man through physical labor working on the wall.

>>30174068
>thinking free floating vs non free floating is an actual issue
>thinking I paid full price for this Acog

I don't normally say this anon but kys

>>30174084
figs

File: tjtyjyuj (13).jpg (182KB, 1758x843px) Image search: [Google]

182KB, 1758x843px

i really need to hit the sack.

>>30174105
>battery acog
>BAD
>that foregrip
>MOE stock
>that takedown pin
>MI rail

this rifle is all sorts of killyourself

>>30174094
somewhat, i'd feel much better if i was a shitty shot and the barrel was good.

>>30174105
i need to take a shower but i just cut my finger so i'll shower in the morning.

>>30173601
how often does geissele have sales like that? im lookin to get a rail from them

>>30174065
If its going to be a benchqueen then why do you need to save weight?


>>30174097
>implying I dont already work manual labor
Why do you faggots get in such a fuss about how I look?
The way I look doesnt necessarily represent what I like or what I do. Didnt you learn this shit in middle school?

File: image.png (2MB, 750x1334px) Image search: [Google]

2MB, 750x1334px

>>30174013
Stop.

>>30174077
Good to hear that you know what the issue is.

File: image.jpg (2MB, 2967x3955px) Image search: [Google]

2MB, 2967x3955px

>>30174013
>mfw

File: 1460397861110.jpg (562KB, 1920x1080px) Image search: [Google]

562KB, 1920x1080px

>>30174118
this

>>30174130
why

>>30174124
july 4th is probably the next one

>>30174140
fuck lizards you bitch nigger. Also fuck your state.

>>30174012
what barrels have you tested so far?

>>30174127
I hate seeing faggots

File: tjtyjyuj (14).jpg (139KB, 1235x606px) Image search: [Google]

139KB, 1235x606px

>>30174118

I love every piece of kit on that rig. Its competition and innawoods proven.

>>30174140
kys

File: image.jpg (2MB, 2921x3894px) Image search: [Google]

2MB, 2921x3894px

>>30174141
You know why.


What's the minimum purchase from BCM to get some swag?

>>30174149
K

>>30174127
For the 5% of the time I hopefully get off my lazy ass and go on a hunt. And to save money

>inb4 building ar10 and wanting to save money

File: image.jpg (4MB, 4032x3024px) Image search: [Google]

4MB, 4032x3024px

>>30174157
Ok brb bb

>>30174153
>I dont like the way other men are dressed
wew to the toppest level lad

>>30174159
just keep buying shit in slowly increasing increments of total value. Then let us know when you get a hat. It will be good research worth your fucking trip.

File: DSC_9059.jpg (2MB, 1800x1200px) Image search: [Google]

2MB, 1800x1200px

>>30174141
fuck off and kill yourself

>>30174159
a new upper
this last one they sent me too much fucking shit
the hat sucks compared to the old ones

>>30174127
>Why do you faggots get in such a fuss about how I look?

some people have really deep-rooted insecurities and they feel that doing this makes them have a distinguished outward appearance

they're lacking emotional maturity, probably just coming out of their teens and in their early twenties and their frontal cortex isn't even finished forming.

>>30174167
Faggots in general

>>30174150
2 noveske 14.5, DD 10.3, and BA hanson 14.5

all have shot like shit but they all also had the gas port opened up to .125" and one noveske(current) opened to 5/64ths

File: image.jpg (1MB, 4032x3024px) Image search: [Google]

1MB, 4032x3024px

>>30174171
I might do that

>>30174173
Gib

File: 1464488921007.gif (297KB, 500x281px) Image search: [Google]

297KB, 500x281px

>>30174159
too much for you

>>30174166
Cute lower
You gonna wait for you dad to finish it for you or some shit?
Couldn't get that low profile gasblock on your shit AR either could you?

>>30174161
I mean I use moe too so I can't complain. It works and its cheap and light so nothing wrong with it. Plus you could always free float later if you get bored of it or whatever

>>30174068
male feminism and mlp? You brought those tabs up for shits and giggle right.
Also I too forgot how to take a screenshot, never would have imagined it was print screen.

FUCKING internet explorer!?!?

>>30174173
even their old hats sucked. way too loose in the top with extra material

>>30174159
>What's the minimum purchase from BCM to get some swag?
Buying a KMR will get you stickers
Buying an upper will get you stickers,poster and hat

File: 62e372f423f3918926faafaaa881409f10c22ec4.jpg (109KB, 900x1068px) Image search: [Google]

109KB, 900x1068px

>>30174183
>Gib
give me your address and i'll send you something memetastic

>>30174180
you the one with the big fucking honkin hole in your upper?

also your ammo is more important than your barrel. and your chamber is more important than your barrel as well.

>>30174185
Bruh pls go

>>30174187
I have my LPK in the mail and I'm gonna try to get a timeframe Monday or Tuesday

>>30174193
I don't want any of that though

File: he dead.gif (2MB, 211x173px) Image search: [Google]

2MB, 211x173px

>>30174173
lmao lke rely nigga like sry fma aah lmam

>>30174183
i like your bird

>>30174200
>I don't want any of that though
kys

>>30174194
M- meme aspic?

>>30174174
Pretty much. Just reminds me of the metal elitist days.
>You dont look metal so you're a poser!
literally no different then
>You look like a hipster so you must be into hipster shit!

>>30174187
it's already free floated with an SLR ultra-lite, but I wasn't sure if putting a fixed stock like that with no cheek adjustment was dumb for a majority bench gun

File: 3368992_02_bcm_cover_bravo_company_mfg_in_640.jpg (34KB, 533x476px) Image search: [Google]

34KB, 533x476px

>>30174192
your head is small

i wear the two i got every day

>>30174210
what

File: image.jpg (3MB, 2968x3956px) Image search: [Google]

3MB, 2968x3956px

>>30174217
What you gonna send me

>that fucking bird is still there

>>30174196
the hole was for the war upper parts that i retro fitted into a mur upper, that one had the hanson barrel.

for $400, the noveske chamber better be perfect and i was using BH 77gr tmk, very good ammo.

>>30174212
that's definitely occuring here as well, adopting things for the approval of others instead of for themselves. it's a sign of extreme insecurity.

i usually just call them a tryhard kiddo and ignore them... that is what they are after all. adults dont behave in this manner unless they have personality disorders. dysfunctional adults.

>>30174212
just kys dumb faggot

File: 1424637792299.jpg (1MB, 1680x1059px) Image search: [Google]

1MB, 1680x1059px

>>30174228
well thats for you to find out isn't it

>>30174235
theoretically very good ammo but every chamber is different. can you handload? you should load up to the rifling if you can. maximum consistency.

File: BCM hat Black-2T.jpg (18KB, 250x166px) Image search: [Google]

18KB, 250x166px

>>30174217
oh that's not the one i have so maybe that one fits better. pic of mine.

the PSA hat i have fits like a glove i just feel like an idiot wearing it

>>30174105
shitting rail, but I dig the Fortis Shift.

File: d6db736abea0b098baa74fa711318e047f1996ba64f01868c3e559a1fea70e1d_3.jpg (47KB, 480x480px) Image search: [Google]

47KB, 480x480px

>>30174215
ohh stock
gotcha

>>30174245
ya ok pal

File: sample-a8b9381cae76574a80fa11ab8e0f7f0c.jpg (161KB, 850x1248px) Image search: [Google]

161KB, 850x1248px

>>30174258
oh yeah, they all seem to be different

the geissele hats are also fucking terrible
primary arms hat isn't too bad

>>30174235
what model barrel are you using again?

File: shit hat.png (195KB, 654x452px) Image search: [Google]

195KB, 654x452px

>>30174258
>tfw i got the shitest BCM hat they have

File: image.jpg (2MB, 2297x2998px) Image search: [Google]

2MB, 2297x2998px

>>30174274
Geissele hat was bad I gave it away. I just ordered the skd blasting cap for shits and grins

>>30174283
Noveske

5.56mm Lo-Pro Gas Block Barrel

CHF Chrome Lined Barrel -556 & 300BLK

--1 in 7" twist

--Extended feed ramps
--Manganese Phosphate finish
--Gas tube
--Pinned Low Profile Gas Block, .750 -14.5" SCLP .625 Gas Block
--1/2x28 = 5.56 - 5/8x24 = 300BLK
--Light Contour

Our chrome lined barrels are cold hammered forged and made with the material callouts and manufacturing process for the M249 Machine Gun barrel.

The cold hammer forging process work hardens the steel around a rifled mandrel, which creates the lands and grooves. The barrel is then chrome lined to the spec for a M249 Machine Gun barrel, which is about twice as thick as that of an M4 barrel. The end result is a rifle that can be run hard day after day. For any high round count, high temperature, heavy shooting, we recommend our chrome lined barrel.

File: image.jpg (3MB, 2902x2177px) Image search: [Google]

3MB, 2902x2177px

>>30174250
That statement worries me but here you go

550 North Brand Blvd., Suite 800
Glendale, California 91203

File: p6198119_0.jpg (15KB, 500x375px) Image search: [Google]

15KB, 500x375px

>>30174274
>>30174284
>>30174288
>this is now a hat thread

anyone have a larue hat review? i'm expecting one this week

File: I_bf81c95810966.jpg (31KB, 550x513px) Image search: [Google]

31KB, 550x513px

>>30174284
kill yourself

go and get the gun right now and just fucking do it

>>30174304
yeah it sucks

idk where i put mine

File: 1462160474988.jpg (4MB, 3264x2448px) Image search: [Google]

4MB, 3264x2448px

>>30174306
have you ever considered seeking professional help? this cant be good for you

>>30174320
do it

File: 1460333592608.png (1MB, 1334x750px) Image search: [Google]

1MB, 1334x750px

>>30174329
nope

File: hats.jpg (2MB, 1944x2592px) Image search: [Google]

2MB, 1944x2592px

>>30174304
i only wear the green lt hat occasionally.

File: junk.jpg (609KB, 2048x1152px) Image search: [Google]

609KB, 2048x1152px

Can't wait to put all this shit on tomorrow.

File: image.jpg (1MB, 3146x2329px) Image search: [Google]

1MB, 3146x2329px

>>30174382
I'm waiting to get the scope and amd mount combo

File: DPMS3.jpg (67KB, 911x549px) Image search: [Google]

67KB, 911x549px

>>30174262
>shitting rail

whats wrong with the rail? Not gucci enough? It holds what I need and allows for comfortable grip. Why would anyone want another?

File: image.jpg (1017KB, 1580x2557px) Image search: [Google]

1017KB, 1580x2557px

I know the FDE MBUS's look full retard. They will be fixed eventually...

File: 1460862773308.gif (2MB, 371x331px) Image search: [Google]

2MB, 371x331px

>>30174407

File: 06157.jpg (649KB, 1797x925px) Image search: [Google]

649KB, 1797x925px

>>30174406
needs some folding irons imo, but i like your rifle

>>30174407
i like the 2 forward grips

>>30174448
Lol it's not attached, just used the bipod to take the photo

File: image.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

What do I do with it

>>30174480
leave it alone

>>30174480
remove sky rat

>>30174480
train it

>>30174447
How this homie. I took pics before the irons and light for some reason.

File: image.jpg (936KB, 2386x3093px) Image search: [Google]

936KB, 2386x3093px

>>30174497
Whoops

>>30174480
Love him

File: S67.jpg (2MB, 2000x1500px) Image search: [Google]

2MB, 2000x1500px

>>30174509
im a fan of geissle rails, i dont need any more rails or any other ar stuff right now but i was very tempted by the recent sale. like $187 shipped for a 13" mlok mk4 rail which would have replaced this 9.5" rail. other than looking cooler and a slight increase in sight radius, i guess im not missing out on much

File: 20160116_233632.jpg (4MB, 5312x2988px) Image search: [Google]

4MB, 5312x2988px

>>30174509
r u me?

File: image.jpg (1MB, 2386x3040px) Image search: [Google]

1MB, 2386x3040px

>>30174597
What upper??

File: 20160210_193302-1.jpg (2MB, 2560x1440px) Image search: [Google]

2MB, 2560x1440px

>>30174655
mk8 13in

>>30174730
Sorry ha I was talking about the receiver I used the bcm upper receiver with the tighter barrel extension

File: F1RAK15 (1).jpg (137KB, 800x520px) Image search: [Google]

137KB, 800x520px

Can someone please help me find a flared magwell stripped lower with minimal or no logo? billet or not?
Royal arms has one, but i read theyre out of spec as fuck.

>>30174779
Noveske

File: 20160116_164329.jpg (3MB, 3264x1836px) Image search: [Google]

3MB, 3264x1836px

>>30174759
Oh
yeah bcm

>>30174552
Light and light mount?

>>30174798
$300 ? fuck

>>30174357
>geissele sent me 2 shop aprons and a free trigger
I just wanted a hat...

>>30174913
>geissele sent me...a free trigger

tell me your secrets

>>30174961
Order more than $20,000 worth of shit from them in one go.

I guess they didn't realize I was an "authorized dealer" and that I'd set it up with Bill Geissele himself at an NRA show.

The swag even came in a separate box parcel-post, instead of freight on a pallet like my order. And was addressed to me personally, instead of the business I was ordering for.

Any decent keymod/1913 lights for handguard? Thinking of getting a handstop as well, not looking to spend a fortune

File: 1463371557188.gif (2MB, 512x321px) Image search: [Google]

2MB, 512x321px

>>30175047
> $20k of ar shit
>summer of 2016

Literally the worst move you could make. Gunpocalypse already happened 3 years ago, and we will never see volume sales like that again.

Are you retarded, or just a fudd?

>>30174044
>>30174044
YOU.

File: AR_right.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

Optic and sling should come Wednesday.

Quex is gay xddd

>>30174191
Goddamn son, you shouldn't advertise your newness so hard.

I just bought a lower receiver for my first build and realize I don't know shit about buffer/Buttsrock options. Any recommendations for a beginner ?

>>30176280
Your buffer choice will be based on what barrel length/gas system you are going with. What are you planning to build?

File: IMG_20160605_095139966.jpg (3MB, 4160x2340px) Image search: [Google]

3MB, 4160x2340px

Work has had me swamped so I've missed a few days, BUT my rail,gas block, takedown pins, and BUIS came in

>>30176334
I am leaning towards carbine length and the only stocks I've ever used are those generic 6 position collapsible ones but I see here everyone has these ones with nice sloped cheek pieces

>>30174407
>Im gonna need two hands for this

>>30176376
Someone could probably speak to this better than I can, only have mid gas, but for carbine buffer you could go with carbine, H, or maybe H2. Rule of thumb is something like, "Use the heaviest buffer that can cycle the weakest ammo you'll use without issue." As far as stock, I have the bottom rung Magpul MOE and it's not bad, but wouldn't mind something with a bit more material for cheek weld.

>>30174357
>>30174304

Am I the only one here who kind of gets sick of the swag. It's cool at first

Untill you have 12 of the same had and 13 Dillos sitting in a junk drawer and you have so much dillo dust you may never use all of it

>>30174028
so is that shitty A2 handguard

>>30176470
I like tiered swag. Like if you buy so much over the course of your account you get upgraded shit, or the chance to have a good discount on your next purchase.

File: IMG_2480.jpg (413KB, 3264x2448px) Image search: [Google]

413KB, 3264x2448px

>>30174357
Mine has velcro on top, suck it fagit.

File: nohope.png (98KB, 666x666px) Image search: [Google]

98KB, 666x666px

>>30174077
>2.6 MOA average
Jesus Christ.

File: IMG_20160426_191213397.jpg (623KB, 1920x1080px) Image search: [Google]

623KB, 1920x1080px

>>30176518
what did it end up being? His barrel?

>>30176541

a e s t h e t i c rollmark

>>30175202
Have you not heard of Hilary Clinton? There is an election in November, a potential "Gunpocalypse" is merely a few months away you dumb fuck.

>>30176541
His paintjobs and shitposting caused his barrel to get terminal cancer.

>>30174077

Have you considered switching over to AKs?

>>30176609
I think he'd get better groups with buckshot

>>30176609
He actually did say something about that

File: WP_20160604_016[1].jpg (2MB, 3072x1728px) Image search: [Google]

2MB, 3072x1728px

>>30176541
Probably him being Giddy/IDF.

File: Beryl and AR.jpg (2MB, 1681x2988px) Image search: [Google]

2MB, 1681x2988px

>>30174077
>>30176609
MAC was able to get about 1 MOA with the beryl in his video on it. :^)

File: WP_20160426_004[1].jpg (2MB, 1707x2631px) Image search: [Google]

2MB, 1707x2631px

>>30176609
>"Hey guys, got this WASR yesterday, gonna put it in the sled and see just how awful this piece of slavshit is."
>6 MOA
>"S-see guys, AK a sh-shit, going back to my ARs..."

File: 87432033.jpg (27KB, 635x452px) Image search: [Google]

27KB, 635x452px

What are the differences between the various lower receivers? Aren't they all just milled aluminum?

>>30176696
Nearly all of the forged lower bases come from the same 3-5 suppliers and the specs of the milling out process is known to everyone and their fucking dog by this point. Some are fully ambi, but other than that, a lower is a lower is a lower. Billet lowers are gucci status and gucci status only.

>>30176630

I've been meaning to ask, what's that stamp thing on the front of the magwell?
Also, what was more prevalent through most of the Vietnam war, canvas or nylon slings, and for ammo M56 short or M67 short or bandoleers?

>>30176696

There really isn't much of a practical difference between them.

>>30176718
So an Anderson lower is fine for shooting paper?

Where should I make up the difference? Barrel, trigger group, etc?

>>30176743
Yes. Barrel, Trigger, and good ammo.

File: Defense-Stamps.jpg (89KB, 720x540px) Image search: [Google]

89KB, 720x540px

>>30176731
>what's that stamp thing on the front of the magwell?
Department of Defense acceptance stamp. Officially, all of the ARs were supposed to have them during 'Nam, but it wasn't done all the time, and the stamps themselves aren't even embedded in the lower, it's just a white paint mark applied with a rubber stamp. Naturally, that's not going to weather well in a damp shithole like Vietnam, especially coupled with actual use, so you don't see them often in pictures. They varied in location, some being on the front of the magwell, some being on the left or right side.Size even fluctuated. Pretty much another instance of zero consistency with 'Nam-era ARs.
>what was more prevalent through most of the Vietnam war, canvas or nylon slings
I've seen canvas more often than nylon, so that's what I went with. plus it just looks better.
>and for ammo M56 short or M67 short or bandoleers
No idea there.

>>30176774
Speaking of good ammo, what do you guys recommend for cheap target shooting ammo at the range?

>>30176799
I use wolf to plink and match when I want to make small holes.

>>30176743
Anderson is perfectly functional. It can earn you mockery for being a poorfag, and we're all about rollmarks here, but other than that, it's fine.
>Where should I make up the difference?
Get a good barrel, get a good trigger, get a good bolt, get decent ammo. Your AR is now set until you shoot the barrel out.

>>30176799
Wolf, PMC

File: WP_20160521_015[1].jpg (1MB, 3072x1728px) Image search: [Google]

1MB, 3072x1728px

>>30176822
Example of AESTHETIC rollmark

>>30176799
Brown Bear, Monarch, Wolf Gold. The latter-most is a particularly good value, being brass cased and M193, so you can hunt and use it for HD as well as for plinking/target shooting.

>>30176799
I usually use IMI, American Eagle, and PMC. Haven't run any Wolf through yet.

>>30176743

It's fine for anything and everything. The upper makes all the difference.

>barrel
>BCG
>handguard
>optic
and
>trigger

Are things you shouldn't cheap out on.
But if you're really short on money, a GI trigger after a garage trigger job, a milspec parkerized BCG and a basic FF handguard from a non-shit company will all be cheap and do everything you need them to do, and will allow you to spend more on a decent barrel and optic.

>>30176786

Thanks, familia.
I wanted a canvas sling over nylon, but couldn't find one, actually I was pretty lucky even just to find a nylon one in good shape.
But it's grown on me, what with how slick and pliable the nylon is. I got to handle a canvas one and it just seemed too thick and stiff.

File: IMG_8438.jpg (2MB, 5202x3465px) Image search: [Google]

2MB, 5202x3465px

hows everyone doing this morning?

>>30176799
Not anything Giddy is shooting.

File: 1418521414028.jpg (812KB, 2560x1600px) Image search: [Google]

812KB, 2560x1600px

thinking of doing a 6.5 Grendel build for long range plinkin'. Good idea or retarded idea?

>>30176856
About to head off to the range. Little rainy, but they have steel so it's all good.

>>30176477
Hey, I love A2 handguards you shit

File: WP_20160126_002[1].jpg (4MB, 3072x1728px) Image search: [Google]

4MB, 3072x1728px

>>30176850
>I got to handle a canvas one and it just seemed too thick and stiff.
I think some aged poorly and turned into nearly unworkable pieces of shit as a result. My initial canvas sling (seen here) with a sexy brass tab was so thick I had to use a fucking vise to close the adjustment tab. After putting up with that bullshit for a year, I got another one to see if that'd solve the problem. It didn't have the brass tab, but it did adjust easily. I'd be on the lookout for a better canvas, though I have no idea how many swelled up like that.

>>30176861
I say dumb unless you are reloading for it. I'd rather go 6.5 creed or 243 in an AR-10 upper.

File: FWe7n6G.jpg (1MB, 2160x1440px) Image search: [Google]

1MB, 2160x1440px

>>30176887
Is the ammo too expensive or are the loads on the market just shit?

File: IMG_20160209_144550.jpg (1MB, 1800x1108px) Image search: [Google]

1MB, 1800x1108px

>>30176861
I like mine, but like anon said, you should reload. 1.25 per round gets old quick

File: IMG_8353.jpg (2MB, 5202x3465px) Image search: [Google]

2MB, 5202x3465px

>>30176864
nice man have a good one

File: zHf5WNw.jpg (980KB, 5312x2988px) Image search: [Google]

980KB, 5312x2988px

>>30176932
Thanks.

>>30176906
non-standard bolt
ammo isn't terribly priced but why go long if you aren't gonna reload for it?
It's a Bill Alexander idea


other than that, IMO you'd be better off going 6.5 creed or 243 for a long range cartridge.

>>30174077
Is that the new barrel or that same one?

File: YKMScRi.jpg (324KB, 2900x2136px) Image search: [Google]

324KB, 2900x2136px

>>30176961
Will keep that in mind.

>>30176906
>>30176887
Wolf makes ~30cpr steel case for it...just saying

people have said that it actually does fairly good in terms of accuracy

File: 20160518_135833.jpg (528KB, 1934x1019px) Image search: [Google]

528KB, 1934x1019px

This week on EU reality TV:
- another proposal for a blanket ban of >90% guns and mags, handed over to another literally-who EU committee for a vote
- proposal to ban all lead based ammunition and fishing weights (i.e. if we can't ban guns, let's just ban ammo)
- Netherlands trying to fuck shit up for everyone real quick before they have to give up the chairmanship

This is getting more and more like dodging bullets. You have to succeed every time, but they only have to get lucky once.

File: 20160605_081751.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

>>30176833
I've had very good experience with this DTI lower and BCM upper. What is the general consensus on here of those brands?

File: 079[1].jpg (311KB, 1024x768px) Image search: [Google]

311KB, 1024x768px

How do you guys take pictures through your optics like in this picture? I can never get my camera (phone) to take a clear picture though the optic, the image through the optic is blurred while the image around the optic is in focus.

File: WP_20160525_007[1].jpg (2MB, 2574x1722px) Image search: [Google]

2MB, 2574x1722px

>>30177017
>rack number on the PG
Hahahah, what?
>>30177056
I'm sure the DTI lowers work fine, but Del-Ton is one of the greatest examples of a company that produces poverty-tier AR components. BCM produced good shit.

File: WP_20160405_009[1].jpg (2MB, 3072x1728px) Image search: [Google]

2MB, 3072x1728px

>>30177113
Manual focus/luck.

File: VSE 3-6x.jpg (2MB, 2241x2397px) Image search: [Google]

2MB, 2241x2397px

>>30177113
Just have to try to make it focus on the inside.

File: image.jpg (2MB, 2208x3262px) Image search: [Google]

2MB, 2208x3262px

>>30177113
Hold it still

>>30177113

Manual focus.

>>30177136

Dunno, I wanted one on the stock. I would have kept it, but the one on the PG was just meh.
It was such a bitch to get rid of, too. Fucking checkering.

File: image.jpg (72KB, 750x726px) Image search: [Google]

72KB, 750x726px

>>30177113
Steady hands and a big eye box.
If you're trying to take picture with a scope that has an eyebox of less than 3mm you're in for a challenge.
>this pic was taken with an IPhone through a 90mm spotting scope

>>30175202
>$20k of shit
>Geissele shit
Dude that's like, 90 mk8 rails or 80 SD-E triggers. Hardly volume.

>>30177192
When you change magnification the eye relief changes right? In which direction? I mean if I were to try at maximum magnification it would be harder to take a picture through it than at let's say 2x magnification right?

>>30176470
I sell a lot of stuff on forum EE, i usually just give stuff away with whatever im selling. As for toouch dill dust, just give them out to friends and family, im sure theyd appreciate it (even if dillo dust is sweet as shit)

>>30177005
>perennially out of stock
>the 100gr Wolf load has worse ballistics than 77gr 5.56
>first 4 batches had undersized bullets (.261" instead of .264") and as a result both left craploads of copper fouling and were about as accurate as throwing the rounds at the 500m target. Has since been fixed but they never publicly released "bad" lot numbers or did a recall so who knows what's still out.

File: 20160604_144214.jpg (376KB, 1583x1284px) Image search: [Google]

376KB, 1583x1284px

>>30176858
so...no hornady, black hills, cbc, imi, federal, or winchester.

>>30176977
new one, i'm thinking that maybe when i opened the gas port, i fucked something up.

>>30177113
skillz

>>30177240
Yes, eye relief is basically your eye box or exit pupil in other words. As you increase magnification you decrease the size of the eye box, this is one of the big reasons not many scopes are made with magnification past 20x, on a cheap scope the eye box gets down to one millimeter or less at that type of power and quickly becomes unusable for our own eyes let alone a cameraa.
You can measure eye box by taking a piece of paper and holding it behind the eyepiece, the little dot of light is the eyebox/exit pupil.

this is probably the worst place to ask, but I'm looking at building my first AR, and I'm mostly looking at 80% lowers, but I have no idea where to start

What makes some good but others bad? What features should I look out for?

I don't need cheap, I just want something good because I don't like serial numbers.

>>30177334
look for forged aluminium and anodized, that's pretty much it unless you also want a jig.

>>30177300
So you're still to blame for it? Like when nutfancy fucked his stealth upper up.

>>30177349
why wouldn't forged aluminum need a jig?

Anybody here have a motorcycle? It's probably impossible, but I want to figure out a way to carry my rifle in a bag I have with a sling in addition to my backpack full of ammo/pistol/targets to the range. I have my CHL so carrying a weapon concealed on my person is not an issue, aside from trying to figure out how to make that all work while on a motorcycle.

My truck has a coolant leak so until I fix that hose I can't really go to the range at all. My truck also gets about 8 MPG whereas my bike gets like 70, so there's definitely a financial reason since the range is 18 miles away.

>>30177401
You got a bitch seat and a sissy bar?

>>30177401
kill all bikefags

>>30177334
Make sure you're looking at the hardness/type of aluminum. It's up to you what you want to get but I've seen them in 6061 and 7075. 6061 is softer so it's easier to do the machining on but that also means it's softer all around.

>>30177401
Why don't you skip range day and fix the hose? Or trade your truck in on a sensible car?

>>30177397
He's saying that's all you need to look for unless you're also looking for a jig... I think.

>>30177445
Yeah, I understand that much, I'm wondering why forged aluminum doesn't need one.

File: bike.jpg (736KB, 2048x1536px) Image search: [Google]

736KB, 2048x1536px

>>30177414
Nope. I've got a tiny rear seat but very little storage under it and no sissy bar.
>>30177426
Fuck you anon.
>>30177440
I could fix the hose, and I probably should. My lame excuses are that it's too damn hot outside (100F) and I don't have any coolant to fill my radiator and reservoir.
>trade your truck in for a sensible car
I've had sensible cars in the past and I just can't love them. Favorite vehicles I've owned are my bike, truck, and old Camaro I partially restored then sold. Had a 2003 federal P71 Crown Vic that was pretty nice too, but the 4.6 engine in that ended up having some major electrical problems I gave up trying to fix after six months.

File: 20160604_202304.jpg (2MB, 1513x2690px) Image search: [Google]

2MB, 1513x2690px

>>30177394
possibly, that's why i bought a stealth barrel and am gonna put it on my test upper, i'm not gonna do anything to that barrel but shoot it.

going back to the range today to see if the play between my upper and lower contributed to the inaccuracy.

>>30177397
this >>30177445

>>30177483
bikefags get out REE

>>30177477
>why forged aluminum doesn't need one
i'm saying that if you don't need a jig, maybe because you have a cnc mill, then all you need to look for is forged and anodized.

if you need a jig, then you also need to look for one that accommodates your skill level and tools along with forged and anodized.

>>30177513
got it
I'll ask around elsewhere then

Help me decide between the AAC Blackout flash hider and the Troy Medieval comp

>>30177483
Well anon, I'd fix the hose first and foremost. You can forgo a range trip, because quite frankly your bike isn't gonna carry shit. If you had a cruiser or a sissy bar you could. All you're gonna do is drop your shit on the side of the road.

You could also have it towed to a garage and they'll fix it, or get a taxi ride where you could stop off and get your coolant.

>>30177552
Yeah realistically I can just walk to NAPA and get some coolant since it's like three blocks from my house. I already have a replacement hose, I just need to cut it to fit and replace the old worn out one. Basically I'm lazy and hate the heat.

>>30177570
bikefag LEAVE

File: 13384724_10154239282879108_545436476_n.jpg (17KB, 270x480px) Image search: [Google]

17KB, 270x480px

>>30177530
There are different jigs. Like if you only have a drill press there's jigs for that or if you have a router and a drill there's jigs for that. Though I highly recommend having a drill press in either case.

If you're doing the router version, probably get an extra end mill bit. As me and TRUMPtrip have both seen, the bits come out of the router during use and may chip.

I'm finishing up today.

File: merica.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>30177575
Can't make me.

>>30177570
If you're buying 5 or 6 gallons, call them and explain your situation. Most of these places deliver, and if you tell them what's going on I'll bet someone would bring you the juice for little or no charge.

>>30177683
Do you drive in between lanes?

>>30174303
>550 North Brand Blvd., Suite 800
>Glendale, California 91203

kek

>>30177727
No that's only legal in CA as far as I know. I'm studying to be in law enforcement so I'm trying to not break the law on the road. Well... I admit sometimes I don't follow the speed limit when there's no traffic around. Legality aside, it's unsafe as fuck to ride between lanes and I don't really have a death wish.

>>30177778
Good. Because aside from being like the #1 reason why bikers get splattered, it's also the #1 reason why the general public hates them.

Different guy btw.

>>30177685
I used to work at the local NAPA as a delivery driver in my early twenties, and at least back then they would only deliver to people who have an account with the store like farms and mechanic shops.

>>30177778
>>30177792
This is why I dislike bikers for the most part. I hope you are not getting a cj degree bb

File: Snapchat-2672745767119408648.jpg (721KB, 1440x2560px) Image search: [Google]

721KB, 1440x2560px

Anyone else keep there guns tactically hidden?

>>30177778
>>30177792
Bikefag here again. I just want to add that although I have never done it, I can see the merit to riding between lanes SLOWLY IN FIRST GEAR at a stop light to get to the front of the queue as long as there is sufficient space to do so. Studies have shown that it's actually safer for the motorcyclists to do that because they're less likely to be rear-ended, which actually happens quite a bit and can cause serious injury on a bike. Either way, not legal in my state so I've never done it, and I've never felt the need to do it.

While traffic is moving such as on a highway riding between lanes is completely stupid though.

>>30177799
I think it goes store by store on what it'll do.
>had an '88 Park Avenue
>blew the distributor on the interstate
>arranging to get it towed, tow truck ~5hrs out because lolrushhour
>call NAPA to see if they have a replacement distributor for an '88 Park Avenue
>"hey, not to pry but it sounds like you're on the side of the road..."
>yep. Broke down on [interstate]
>"Damn that sucks. Tell ya what, you got tools with you?"
>...yes?
>"Alright, I'll have it out to you in like 40 minutes. What mile marker are you by?"
>tell the guy
>38 minutes later some teenager in a NAPA truck pulls up
>mobile CC machine and all
>back on the road less than an hour and a half after I broke down
>fuck the towing company
I'm pretty sure what they did was directly against company policy/insurance guidance, but fuck it was nice of them.

>>30177824
I hate all of it. Wait your ass in line like everyone else

File: 01f82e9b-e20b-4b4a-9e87-bc2aa719ba8f.jpg (44KB, 600x800px) Image search: [Google]

44KB, 600x800px

>tfw Ramadan habbening right around the corner
>tfw only 350-400 rds of combined ammo

>>30177824
Yeah, it has *a* merit in *one* specific circumstance, which also still pisses people off
>hey, they're cutting!

But 90% of the people who do it at red lights will also do it at 80+mph on the highways, or worse splitting lanes at twice the speed limit in town.

I have, personally, lost 2 driver's-side mirrors to lane-splitters because they misjudged trying to squeeze through a gap less than 2 feet wide at 90+ mph on a 70mph interstate. One guy ended up ditching his bike after he lost control, swerved/skidded across 4 lanes of traffic (miraculously not ending up under anyone), and ending up in the ditch. I think he was relatively okay though, he had full gear on and was able to at least sit up afterwards.

File: 1405109167948.jpg (203KB, 494x817px) Image search: [Google]

203KB, 494x817px

>>30177855
Well its fairly clear by your setup that you dont really know what your doing, so its not like having more ammo is likely to really sort you out any better.

>>30177862
Also, believe it or not, whacking someone's mirror and continuing on your merry way still qualifies as a hit and run. Which, at least in my state, carries a penalty larger than if you'd splattered a pedestrian in a crosswalk.

On top of whatever damage you did, and power mirrors start at about $500.

>>30177815
Yeah I seriously disdain other riders who do stupid shit. Not only are they going to get themselves or somebody else hurt, but they also give me and all other riders (especially if we have a sport bike) this negative stigma. Whether I follow the law or not car drivers tend to hate motorcyclists and it sucks. Riding is still so worth it to me though. Primary mode of transportation for me despite being in rainy pacific northwest.

>I hope you are not getting a cj degree bb
Yes I am getting my associates in Criminal Justice. I'd love to be a Sheriffs Deputy but if that fails I have a job offer at Sentinel in CA. Though I don't want to move to CA.

>>30174013

>not Chuck Taylor IIs
fag

File: ar_v2_s2_flat.jpg (2MB, 2990x1440px) Image search: [Google]

2MB, 2990x1440px

>>30176906
Why are you posting my picture? TAKE YOUR OWN GOT DANG PICTURES, FREELOADER.

>>30177799
Call them anyway. We did delivery for minimum amounts or if it sounded like the guy was in a panic.

>>30177905
What county are ya in? I would recommend not getting a cj degree but any degree is better than none

>>30177905
>why people hate sport bikes and their riders
-extremely, annoyingly and (depending on aftermarket) painfully loud, even at a distance through a well-insulated house or car

-shithead riders seem to be the norm (even the ones that don't blatantly act like thugs, since the majority of them speed in excess of 20mph over); whereas shithead drivers are the exception.

-accidents involving sport bikes do almost as much total damage (both lives and dollar amount) as semi trucks, and nearly 3x as much as SUV's or full-size trucks. And they're far more frequent than accidents involving semi trucks.

-many sport bikes lack turn signals, some lack brake lights, almost none of the riders use hand/arm signals. Further, all their lights (including headlights) are comparatively dim and flicker badly, making distance judging at night very difficult.

File: EXT-16-M4-15.jpg (54KB, 900x198px) Image search: [Google]

54KB, 900x198px

Have any of you guys had any experience with Anderson's EXT forearms? I'm planning on cloning this upper for my 16" upper build. It's relatively inexpensive, coming in at like less than $120. I don't plan on putting anything on it really other than a light, front sight, and an AFG probably.

>>30177964
Anderson makes good receivers and small parts, not much else.

>>30177855
What's with the iron sights and optics placement? Maybe I'm missing something, but it seems like your front post would appear in your optic and your rear flip up iron can't flip up because of the optic lens. Am I missing something here? What's the plan with that setup?

>>30177905
> I seriously disdain other riders who do stupid shit
Those "other riders" make up probably the majority of bikers. The vehicle is a natural draw for obnoxious assholes who can't help but be what they are.

>>30177984
Really I was just putting the optic on my rifle because I had it, the FSP clears the optic and you can't see it in your field of view. I've thought about taking it off because it makes CQB basically impossible with it on

>>30177984
>maybe I'm missing something
Yep. Guy who doesn't know how to build an AR "properly"
>but it seems your front post...
You really don't notice it at that level of magnification. Same deal with ACOGs and A2 FSP's.
>and your rear flip up iron can't flip up
It could if he hadn't poorfag'd himself into a non-QD mount. As it is, it's just extra weight and expense he can't utilize without at least a good pair of pliers if not an actual wrench.
>what's the plan with that setup?
Troll /arg/ and be a shitter?

>>30177961
Yeah you just described the exact type of rider I fucking hate as a fellow rider. Those are the kinda guys you see riding R1s and CBR600s in cargo shorts and T-shirts and acting like a real fuckwit.

My bike (pictured earlier) has bright as fuck LED indicators, a steady headlight, and bright LED tail/brake light. I have yet to get in an accident on a bike, but I always dress for the slide not the ride. My bike is pretty loud though, so I'm sorry about that if you hate noise. Though it's no louder than my old Camaro was after I put in a crate 350 and replaced the exhaust.

>>30177975
It's this from experience, or are you just shit-posting. I'd like an honest to goodness review of this hand guard if at all possible.

>>30177947
Benton. Why do you not recommend the CJ degree? I'm over halfway through it and I love it so far. When I was in the military I had a sort-of law enforcement role at times and that's when I really learned I liked that kind of work, despite everybody hating you while you do your job.

Like you said, a degree is better than no degree. I plan to eventually continue education with a Bachelors, but we'll see how that goes.

>>30178065
Take my statement for what it is. Another way of saying what I said: "In general and historically, Anderson has made a couple of good things. The rest of their products are the object of debate and are generally not regarded as good quality."

So no, I haven't had personal experience with that handguard. Chances are, no one else here has either. Why? Because when people want to buy handguards, they don't choose Anderson. Why? Because Anderson isn't known for making good handguards.

Critical thinking, my friend.

>>30178063
There's someone in my neighborhood with a GXSR that just absolutely *loves* to go tearing up and down the 25mph main road at >100mph repeatedly from 2am to 4am 3 or 4 days a week. He's got an aftermarket exhaust, so even though I'm over half a mile from the road, it's painfully loud even inside my home.

He's wrecked it twice, to include launching it off a curb and into somebody's second-story window because he was going so fast.

He's one of those douches that rides in board shorts, a wifebeater, and flipflops, and he's covered head to toe in poorly healed road rash scars and tattoos.

The bike has no taillight or turn signals, no plates, and I'm 99% sure the guy doesn't have a driver's license much less a bike endorsement.

>>30177829
Old boss would do shit like that. He worked racecars and had a small shop in addition to owning a NAPA, and he knew shit happens at bad times.

>>30178063
Bright af headlights are so fucking annoying but that's with cars too.

>>30178092
everything you need to know will be taught at the academy and in fto. 80% of departments want a clean slate to train if that makes sense. With mil experience you are already golden cause you get 10 points added to your score.

For most departments a degree is just a check mark in a box but sometimes people take cj and think they know everything, that's what they don't want.

>>30178126
That sounds exactly like my old boss at NAPA in Oregon.

>>30178126
That's pretty badass dude. Bosses like that are rare and awesome.

>>30178120
There is nothing more obnoxious than a Chad with a sports bike.

>>30178190
Yeah there is.
>black sport-bike gangs
All the stupidity and asshole riding, a million times the drugs and violence. They're the ones that randomly decide to surround and fire into grocery-getter SUV's on the highway.

>>30178162
Ah, yeah that makes sense. Well I like to keep an open mind and I'm definitely not a know-it-all just because I took some classes. Experience is the best teacher, and I hope I can express that in the interviews I'll have.

>With mil experience you are already golden cause you get 10 points added to your score.
That's cool I didn't know that was a thing they did. Is that still the case if I was honorably discharged for medical reasons? Medical reasons are no longer an issue and I could get a doctors waiver.

>>30178092

don't listen to anything that fucking retard has to say, he's 20 and NEET as fuck, doesn't know anything other than how to cobble together an AR and shitpost

Get a degree, some departments require some kind of associates or bachelors degree and they typically pay better than those without.

>>30178213
>black sport-bike gangs
There's something even worse.
>black dual-sport gangs
Hooning around doing wheelies on sidewalks and shit while also going off road.

>>30178250
I don't think it matters as long as it was honorable. Those 10 points come in handy. I'd look into WSP as well, they have over 100 spots open.

>>30178273
I'm not neet and I can tell you don't know shit about le based on your """advice"""

File: DSC_9069.jpg (2MB, 1800x1200px) Image search: [Google]

2MB, 1800x1200px

it started raining on me

>>30178312
>I'd look into WSP as well, they have over 100 spots open.
Washington State Police? Interesting thanks for the info. I've got nine months of classes left so I haven't been doing too much job hunting yet. Something available now probably won't be in nine months to a year.

>>30178330
nah, jesus just had to take a piss.

>>30178181
He was awesome in a lot of ways. And he had the number one auto parts store in a 50 mile radius for damn good reason.

>>30174013
What does /arg/ think about 1-6x scope mounts and BUIS on guns with 1-6x mounts.

Is there any point having BUIS on a gun without a QD scope? Is there any point in BUIS at all?

Usage: Coyote hunting, SHTF, would like to get into shooting matches.

>>30178337
Washington State Patrol, yes. Unless there is a Benton county somewhere outside of WA. You can look on publicsafetytesting.com and it'll tell you the requirements for each department and what disqualifiers they have.

You take the written and physical test through them and they send your scores out to each department you pick. Seattle does their own testing and I think maybe Tacoma too

>>30178362
If you have a QD scope mount, sure BUIS can be neat (and possibly maybe actually useful, assuming you actually break your scope).

If you don't have a QD mount, they'd be strictly for aesthetic
>AKA, dumb

>>30177610
I have a router and a drill press. I'm not afraid of a little machining. If I have both, should I go for the router jig?

File: Icelandic-plug-award.jpg (62KB, 600x600px) Image search: [Google]

62KB, 600x600px

>>30178342
>caring about some old dead jew
southerners...

>>30178397
Cause unscrewing a mount is hard right

>>30178397
Yeah, for SHTF and hunting I'm not sure if it makes any sense.

But since my mount is a Bobro single lever QD and it holds zero real well, I think I'll keep the irons on even if it's just so I can practice iron shooting every once in a while.

>>30178392
Benton Country Oregon is what I meant. Forgot there was one in WA.
>publicsafetytesting.com
That's awesome thanks a ton for that resource, it'll help a lot.
>/k/ actually being helpful
What madness is this?

>>30178445
>Benton Country
Fuck I meant County obviously.

File: IMG_8363.jpg (2MB, 5202x3465px) Image search: [Google]

2MB, 5202x3465px

>>30178330
hows the urx 4? trying to pick that or a bcm kmr for my light weight build

all i see online is people who say the install is hard or the gas block is hard to put on

>>30177820
I don't, I keep it tactically in my safe, if I need to shoot someone inside my house I can use my SP-01

File: 1464831596259.jpg (1MB, 5054x3370px) Image search: [Google]

1MB, 5054x3370px

>>30178399

>>30178445
I don't believe OR is part of PST. I think National Testing Network is what OR uses. Police forums can give you a lot of information more specific to your county and how they do things in OR.

File: 20160525_152505.jpg (2MB, 1801x3201px) Image search: [Google]

2MB, 1801x3201px

Didn't post much yesterday because I was helping a friend move.

Look at my rifle /arg/ :^)

>>30178474
it's not half as hard as i expected it to be
i would recommend it over the kmr

you can't pin the gas block, which i don't consider an issue
of course some fucking autist would disagree, but there's this thing called rocksett

>>30178623
i'm just wondering if any of the keymod slots are in the way of trying to screw in the set screws for a 14.5 mid length. non pinned doesn't bug me since my rifle has a non pinned

i also don't really want to just copy your upper..or a kmr upper like a lot of people have.

File: received_10153465633481744.jpg (68KB, 960x471px) Image search: [Google]

68KB, 960x471px

>>30178688
Checked. If you go KMR I would go KMR-a

>>30178688
they shouldn't be
i didn't have any issues with my midlength barrels

anyway you can always cut the slots open a bit more to get at it if you have to

if you can, why don't you get the mlok version?

Who makes the most AESTHETIC receiver ever?

>>30178312

except there are plenty of departments that require a degree you fucking idiot

especially helpful if you ever plan on moving up in the world of law enforcement, like a job with the feds

>>30178749
vltor

>>30178749
Mega
>>30178764
Is objectively wrong

>>30178755
Did you miss the part where I said any degree is better than none? You are clearly uneducated.

File: F1MegaM0910HA1.jpg (132KB, 800x520px) Image search: [Google]

132KB, 800x520px

>>30178777
not with that logo and fucking disgusting BAD cutout

>>30178741
>if you can, why don't you get the mlok version?

what. i didn't know this existed and its beautiful

>>30178800
yes it is and i regret getting the keymod version

File: 20160527_16523.jpg (854KB, 2560x1440px) Image search: [Google]

854KB, 2560x1440px

Ship my upper, PSA

>>30178785

>cj degree is dumb you don't need one, but any degree is helpful

you can't even make a concise point, you just vomit random thoughts onto a keyboard

go climb back into your shit pipe, maybe you can give people advice when you actually have advice to give. all you provide is the ramblings of an underage retard

>>30178818
just call them to cancel it :^

>>30178827

y would I does that 4?

File: 1464564686046.jpg (1MB, 4160x2340px) Image search: [Google]

1MB, 4160x2340px

>>30178798
JUST HATING CAUSE MY RECEIVERS STYLING ON YOURS

File: IMG_8368.jpg (2MB, 5202x3465px) Image search: [Google]

2MB, 5202x3465px

>>30178814
i need to find them in stock somewhere

i must fucking have one in 13"

>>30178845
did you miss the anon having a fucking tantrum about PSA shipping his order before he could cancel it?

he claimed they rushed it out the door just because he called to cancel it

>>30178861
>>30178845

It was a riot. Should gave been there man.

>>30178861
Oh, ha, I caught a little bit of that before work..

What a fuckwit,

>Purposeless discontent

>>30178821
re read what I said cause you are confused.

>muh age
it's ok that you don't know anything about le m8.

File: image.jpg (335KB, 2048x1365px) Image search: [Google]

335KB, 2048x1365px

>>30178749
accept no other replies

File: 20160604_065540_HDR.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30178730
Brother from another mother.

File: image.jpg (2MB, 5202x3465px) Image search: [Google]

2MB, 5202x3465px

Another great /ARG/ in the books

>>30178814
I actually prefer keymod to mlok when it comes to functionality.

File: received_10153446788636744.jpg (16KB, 480x263px) Image search: [Google]

16KB, 480x263px

>>30178906
Muh nigguh!

File: 20160508_152538 (2100x1079).jpg (1MB, 2100x1079px) Image search: [Google]

1MB, 2100x1079px

going to cabelas for ammo then to the range again, made some mods to the sled and gonna see if that helps.

File: 20160525_152242.jpg (2MB, 3201x1801px) Image search: [Google]

2MB, 3201x1801px

>>30178959

You must also prefer jacking off into your own mouth when it comes time to get off.

File: received_10153465633591744.jpg (59KB, 540x960px) Image search: [Google]

59KB, 540x960px

>>30178969
Shitty pictures all day.

File: 20151209_121127.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30178969
Before the forward grip.

>>30178972
get any of the australian outback down the pipe yet?

>>30178990
That picture made me realize I really appreciate the gentle continuous curve Pmags have compared to the STANAG awkward bend in the center of the mag. It's the little things in life.

>>30178990
Time for a new stock anon.

>>30179056
the M4 stock is fine

the A2 grip however....

>>30178990
Why shoot green tips at the range

>>30179071
I want to replace both actually.

>>30179077
Why not?

>>30178991
do you want a 13 or 10.75 rail?

>>30179077
Just in case there are any cops around the range, the rounds will lock on to them and go through any armor they're wearing.

>>30179079
any ideas yet ?

File: 1463965369822.jpg (214KB, 1000x797px) Image search: [Google]

214KB, 1000x797px

>>30178821
CJ degrees aren't given any preference over any other degree with standard LEO hiring and its better to have an accounting degree if you want to go into federal. Anything useful you could learn from a CJ degree you are forced to do over in academy. Literally almost any 4 year degree is better than a CJ just based on the fact you could get a real job while you go through hiring which would look way better because it shows how committed you are to wanting to be a LEO.

I've only ever met one person who's been hired within 6 months out of college and he was a MP, worked 4 years of armed security while getting his degree.

Thanks for your assburger service shitanon.

>>30179088
i'd like a 13. i just found 2 sites with the urx 4 in 13 inch mlok. I going to call them monday and make sure they actually have them.

File: DSC02499.jpg (1MB, 4912x3264px) Image search: [Google]

1MB, 4912x3264px

In with Giddyness

>>30176718
>Nearly all of the forged lower bases come from the same 3-5 suppliers

>and the specs of the milling out process is known to everyone and their fucking dog by this point.

stop parroting this stupid shit. you're the kind of idiot who thinks cnc machinists don't have to do anything but push a button.

milling out receivers so that they fit together precisely takes attention to detail despite what you think, not being a fucking hamfist who can hit a start button.

File: pupper and tree.jpg (720KB, 1224x1632px) Image search: [Google]

720KB, 1224x1632px

>>30179118
>i just found 2 sites with the urx 4 in 13 inch mlok
cool i was going to look but wont now

File: FB_IMG_1432920919385-1.jpg (145KB, 540x960px) Image search: [Google]

145KB, 540x960px

>>30179149
Hello pupper.

File: IMG_1364.jpg (389KB, 885x1303px) Image search: [Google]

389KB, 885x1303px

>>30179156
hello

>>30179149
I actually found a site with them in 14.5. i don't think it will work with a warden unless i went 16 inch barrel

>>30174044
you. YOU . YOU AGAIN

>>30179102
Not really. Some suggestions would be much appreciated.