Thread replies: 15
Thread images: 3
Thread images: 3
File: which one.png (308KB, 841x649px) Image search:
[Google]
308KB, 841x649px
Haven't seen one for a while, so I thought I'd make another.
I'm ready to move onto a progressive reloading press and I've narrowed down my selection to two choices: The Dillon RL550B and the Hornady Lock-N-Load.
I know this is an apples to oranges comparison since the Lock-N-Load is auto-indexing whereas the RL550B is manual, and it would be more accurate to compare the LNL to the XL650. But it looks like the RL550B and the Lock-N-Load are the two most popular progressive reloading presses.
Overall, which one would be a better choice?
>>
>>29497878
Bump
>>
How important is case trimming?
What setup is good for multiple calibers. (Mainly 9mm, .357mag, 50AE, .303br and 8mm Mauser)
>>
>>29497878
I like the powder throw for the LnL more as you can quick change the meter out for other meters that have been preset for various charges.
>>
>>29497935
Case length is very important, and you usually have to check it the more you reuse brass.
>>
>>29497962
Are good calipers enough to check or is it worth it to invest in case length gauges?
>>
>>29497935
Very. If you cases get too long you run the risk of a pinched neck and the over pressure that comes with it.
Single stage for the rifle and a turret for the pistols. If your new to the game, buy something like this.
http://ads.midwayusa.com/product/828368/rcbs-reloader-special-5-explorer-plus-single-stage-press-kit
>>
>>29497973
I've gotten by with just calipers forever.
>>
>>29497986
Reloading kits aren't very great, It's usually better to get things piece by piece.
>>
>>29497973
Calipers are fine. As a backup, I usually keep 2 marked cases trimmed to proper length and set aside with my trimmer. I like to use clear plastic tackle trays to put the brass and trim bits in, as i can mark them and keep everything nice and together.
>>
File: 1417495738756.png (563KB, 641x549px) Image search:
[Google]
563KB, 641x549px
What's the best case trimmer for the money? Only things I reload right now are 6.5x55 and .303.
>>
>>29498089
The Lyman Case Trimmer is the way to go.
>>
>>29498089
Lyman. I bought a cheap folding table that the fucker is bolted to so I can trim and watch TV/shit/sit outside and trim away.
>>
>>29498118
Not a bad idea. I fucking HATE case prep, it's the only part of reloading I hate.
>>
File: tv table.jpg (13KB, 292x320px) Image search:
[Google]
13KB, 292x320px
>>29498133
It's annoying, but it doesn't have to be a tedious chore. Like I said, I have a cheap folding table that I bolted the trimmer to. Then I can watch movies or whatever and trim. Other nice thing about trimming is that AFTER THE TRIMMER IS DIALED IN CORRECTLY you can have a beer or two. I would never drink and do the other parts, but it helps makes case prep much less tedious.
Thread posts: 15
Thread images: 3
Thread images: 3