AR Thread / AR General /arg/ aesthetic rifle general/ Tripfag

File: image.jpg (1MB, 2592x1936px) Image search: [Google]

1MB, 2592x1936px

IN

File: witcher_bailey.jpg (2MB, 2988x1681px) Image search: [Google]

2MB, 2988x1681px

>>29308660
>reticle

Someday

>>29308694
>you will get your back ordered scope before gc changes his gb
you can't make this up

>>29308708
>your "high demand" scope shipped via 3point5 in a week
>your normal fucking rings haven't shipped for 4 months
FUG

At this point I'm tempted to just buy some QD Warnes.

File: detachable mag.jpg (54KB, 650x488px) Image search: [Google]

54KB, 650x488px

>>29308660
Most highly trained and experienced long range and precision shooters are accustomed to mil dot. There's a decent market for that if you're dealing in high quality glass - Nikon, Leupold, Swarovski, etc.

>>29308718
the rings are through 3point5 too? I would have canceled and ordered somewhere else by now desu senpai

File: witcher_flashlight.jpg (2MB, 2988x1681px) Image search: [Google]

2MB, 2988x1681px

>>29308708
No matter what happens, I'll still have changed my gas block before he changed his. The scope will be icing on the cake.

>>29308718
I just got my rings on amazon.

>>29308725
Yeah they are. They were in the same order as the scope and a few other non-/k/-related items so I couldn't cancel it. Oh well, $24 for a set of 30mm QD rings is worth the wait I guess.

Besides, I can still shoot the gun the scope goes on, just have to put up with a chinweld because the scope's currently in a cantilever AR mount.
>44mm objective would normally be best suited to low/x-low rings on this gun
>instead they're in a 1.55" AR mount
The bottom of the objective is over an inch above the barrel.

>>29308734
They're 3x the price on Amazon though.

>>29308660
Does Home Depot or Lowes or Ace carry crush rings for muzzle devices?

>>29308835
Crush rings probably not but I've had okay luck finding timing washers.

File: LMT MWS SP.jpg (103KB, 640x480px) Image search: [Google]

103KB, 640x480px

>AR10

not sure if goes in AR thread, battle rifle thread or in current set up precision thread.

Anyway, here goes.

>>29308868
POST IN ALL OF THEM
Also nice rifle.

Currently have an unbuilt LR308 receiver set, debating on trying to get a .243 barrel for it or building it into a .308 tactical rifle. Already have an LR308 in .308, it's set up as a dedicated bench gun.
>24" barrel with a .900" barrel diameter from gas block to muzzle is heavy AF
The barrel alone weighs more than my SPR.

File: rps20160209_021122.jpg (131KB, 582x891px) Image search: [Google]

131KB, 582x891px

In.

Old sight pic of my psa upper.

>>29308734
Whats optic?

File: IMAG1736.jpg (1MB, 3808x2144px) Image search: [Google]

1MB, 3808x2144px

>>29308660

File: lantac ar15 sp.jpg (1MB, 2448x3264px) Image search: [Google]

1MB, 2448x3264px

>>29308882

Thanks. I had to wait for ages for the nightforce to come back from being fixed, still haven't zeroed it yet. Hoping to get out next week and put some rounds down range.

Have my other AR, it's only straight pull as I'm a bong.

How would you make a smg ar? Is there a way to fuck that gas tube off?

>>29309272
Fuck off retard.

Took a better photo of my TA33.

>>29309206
Lantac master race.

File: Reticle.jpg (711KB, 1630x1224px) Image search: [Google]

711KB, 1630x1224px

>>29309603
Hopefully not upside down this time.

How do I install buffer tube without vise or any special tool?

>>29309614
You'll need a castle nut wrench at the least. Even a one-toothed one off amazon is fine.

File: image.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

>aesthetic rifle general
Finally an AR thread I can post in

>>29309671

Change the pistol grip and get some irons, other than that, nice.

>>29309687
I'll be getting some sights at some point, but why change the grip?

>>29309771
a e s t h e t i c
t h e
t i c

File: 20151020_090630 (2100x1765).jpg (944KB, 2100x1765px) Image search: [Google]

944KB, 2100x1765px

>>29308660
ok

>>29307629
how does $40 shipped sound?

as for the raptor problem, basically, my raptor latch wore out and started hitting me in the nose when shooting.
after that i decided to fuck with it since the worse that could happen is it keeps hitting me in the nose when shooting.
i discovered that my raptor can be released by applying reward pressure to the body/shaft, without actually touching the levers.
i tried the same with a mil-spec one and it wouldn't budge, not even a little.

the problem is with the design of the raptor and the location of the springs or pivot points.
it's not a problem until it's a problem, but since i use my shit a lot, and rough, it's a problem for me now and now i want a bcm ch.

NOTE- i never modified the ch until AFTER it started malfunctioning.

File: 20160315_203152.jpg (4MB, 3860x2171px) Image search: [Google]

4MB, 3860x2171px

If anybody wants a Magpul MVG that fits MOE hardware, let me know. I'll give it to you for cheap.

>accidentally bought the wrong Magpul hardware for my M-LOK rail.

>>29309789

Are you still committed to drilling bigger gas ports in your barrels, after making the weight of your buffer system fucking massive, thus inciting multiple problems that did not exist in the system as designed?

File: 2016-03-18 14.5 77gr 5th.jpg (198KB, 1200x806px) Image search: [Google]

198KB, 1200x806px

>>29309863
>Are you still committed to drilling bigger gas ports in your barrels
yes, did it to my noveske and pic is the result.
>thus inciting multiple problems that did not exist in the system as designed?
such as?

>>29308925
Vortex strike eagle.

File: 20160315_203304.jpg (4MB, 3600x2025px) Image search: [Google]

4MB, 3600x2025px

>>29309876

The cascading effect of you ruined the last barrel you had drilling the port. It just seems like you are making the rifle more complicated than you have to.

If that's how your new barrel groups, you're fine. But I still feel like you're just adding problems into the equation.

>>29309884
the last barrel was a nitrided barrel, apparently those don't like being drilled.
i'm sticking with chrome lined from now on.

File: 20160228_045214.jpg (2MB, 2000x3556px) Image search: [Google]

2MB, 2000x3556px

>>29309899

That's the impression I got, sounds like the nitrided steel mushroomed out for whatever reason, while the chrome is okay. My personal guess is you had too high of a speed for the nitrided barrel, because you did the same thing you did for the chrome. I'm not a machinist or materials engineer, I'm just guessing here.

>>29309907
your guess is as good as mine.

File: FinallyFinished.jpg (1MB, 2656x1494px) Image search: [Google]

1MB, 2656x1494px

Can I obberate wif you guise?

>>29309979
that's a big paddle

File: 20160318_102829.jpg (2MB, 4128x2322px) Image search: [Google]

2MB, 4128x2322px

Butticle

>>29310033
looks soft

>>29309991
for you

File: nombqhFxd81s4o0zj_400.jpg (81KB, 398x553px) Image search: [Google]

81KB, 398x553px

>>29310033
Just like my Chinese cartoons

File: _HorribleSubs__Oshiete__Galko_chan___04__720p_.mkv_snapshot_02.55__2016.02.07_15.13.37__.jpg (62KB, 423x404px) Image search: [Google]

62KB, 423x404px

>>29310033
>no panties

File: WP123414123.jpg (126KB, 406x720px) Image search: [Google]

126KB, 406x720px

Still shopping around for some glass to put on this one.

>>29310179
get a 4-16 and put a rmr on top.

File: 20160319_102043.jpg (2MB, 4128x2322px) Image search: [Google]

2MB, 4128x2322px

>>29310109
>>29310137
>>29310079
Tfw it's a trap

File: 20160319_095657.jpg (922KB, 1920x1080px) Image search: [Google]

922KB, 1920x1080px

>>29309979

I like your charging handle m80.


>>29310179

What kind of optic are you looking for?

File: image.gif (466KB, 400x225px) Image search: [Google]

466KB, 400x225px

>>29310195
And...

>>29310195
Continue

>>29310213
>optic for 20in AR

Something somewhat compact without a shit ton of magnification, like in the 1-6x range. Something in ballpark of the Vortex Crossfire2, Strike Eagle, or Nikon P223 series. So many options in this range it's hard to pick one.

>>29310255

This might interest you.

https://www.americandefensemanufacturing.com/view/product/574/

File: IMG_20160314_222324715.jpg (717KB, 3090x2694px) Image search: [Google]

717KB, 3090x2694px

>>29308691
There is no reason to use offsets with a red dot mane

Is it best to build or buy an AR upper? Any input is appreciated.

>>29310255
I own the vortex strike eagle and suggest it to anyone who will listen. I love it.

>>29310395
Depends on what you want and what your budget is.

File: 20160306_145626.jpg (1MB, 1445x1025px) Image search: [Google]

1MB, 1445x1025px

>>29309979
That rifle looks sweet! 8/10

Please tell me how you got that Magpul AFG on your Keymod rail?

File: IMG_20160318_124925554.jpg (4MB, 5312x2988px) Image search: [Google]

4MB, 5312x2988px

>>29310395
If you can get parts from one supplier, feel free to build it. Otherwise shipping costs can add up.

I bought mine assembled on account of the manufacturer discounting certain components

>>29310421

That's the AFG that mounts to a rail.

You can figure out the rest.

>>29310418
Budget is maybe 7-800. I want a 14.5 inch upper of as good of quality as possible. Mlok guard too. Match or very close to match quality as this will be my "main battle rifle" so to speak. Will be doing some hog hunting with it too if that changes anything.

>>29310426
Who did you get yours through and how much did it run you? Nice rifle.

File: first tour.png (323KB, 761x522px) Image search: [Google]

323KB, 761x522px

>>29310418
parafag? You were a para what? I'm guessing you were a pair a high heels.

Fuckin cherry.

File: IMG_20160317_110720216.jpg (3MB, 3719x2092px) Image search: [Google]

3MB, 3719x2092px

>>29310449
Thanks.

I built the lower myself for ~$200 maybe 250
Bought the upper assembled for ~$500
Optics/irons cost me another $200

The upper is from radical firearms - great quality but the wait times are literally insane.

>>29310439
I'd pick up a 14.5" upper assembled from BCM, then a low-pro gas block and the MLok rail of your choice, I'd recommend the Geissele Mk8.

Then you just remove the FSB, install the gas block, and install the rail, and pick a muzzle device to pin/weld.
>>29310472
Heeeey it's my favorite anon, here to lie on the internet about what a tough guy he is

File: 20160306_142133.jpg (277KB, 612x816px) Image search: [Google]

277KB, 612x816px

>>29310475
Nice picture. When are you going to get a flip up front sight?

Any issues with the upper? Anything come loose?

>>29310435
Are you sure? It looks pretty close to the handguard for a rail to fit in there. Is that the normal AFG or the AFG2?

>>29309979
Noveske. Nice... I bet that cost a bit.

>>29310478
Except I can prove it and you are just a blow hard (at least that's what the satisfied people in your platoon claim).

File: 20160228_043701.jpg (2MB, 1600x2844px) Image search: [Google]

2MB, 1600x2844px

>>29310496

AFG 2 I guess. I dunno. I can tell you for sure that is the version that mounts to a 1913 rail.


>>29310507

Parafag doesn't claim to be anything. Once upon a time he was in the Army and went to Airborne school. That's what I understand about him.

You on the other hand, are some guy flinging shit about something not related to ARs. Which is silly.

Tell him he has a shitty rifle and we'll talk.

>>29310507
Shut up faggot

File: r8again.jpg (2MB, 2560x1920px) Image search: [Google]

2MB, 2560x1920px

>>29308660
Back with muh optic

R8

File: 20160228_024435.jpg (665KB, 1920x1080px) Image search: [Google]

665KB, 1920x1080px

>>29310539

Noice/10

Got any plans for BUIS?

>>29310539
weeabuu/10
eat dick fag

>>29310529
You play with dolls like a little girl. What the fuck. Why do you even open your mouth outside of sucking cock?

File: IMG_20160318_001724321 (1).jpg (2MB, 4111x2324px) Image search: [Google]

2MB, 4111x2324px

>>29310496
Do they make HK style front flipups? Mine works so well with the KAC I really cannot go back

The upper is squared away. Fit is great, finish is boring but flawless. There is -ZERO- play between the upper and the lower. I was legitimately surprised. But both came from Cerro forge (Keyhole) so I guess it's all to spec

I really just want to beat it up and see what happens down the road

File: 20160224_153703.jpg (733KB, 1080x1920px) Image search: [Google]

733KB, 1080x1920px

>>29310549

I mostly use them to take pictures with my AR.

I mostly just open my mouth to suck in air after laughing too hard.

Mostly at Dom.

https://www.youtube.com/watch?v=AvmqC1igJvM

>>29310478
Should the block be adjustable? I'm running the spikes buffer assembly. I have heard hearsay about it having ftf and figured the adjustable block would help

>>29310543
I had mbus pros but believe it or not the front one fucking snapped off. I removed the rear because it looked gay.

>>29310545
My gf grew up on that stuff and wanted to stick it on there. Hey, if playing ultimate ninja storm or whatever the fuck gets her more into vidya and a cheeky little sticker on a rifle gets her more into shooting I'm not about to complain.

>>29310391
Except that I like them :^)

>>29310550
Troy has an HK style front flipup sight.
I just bought one from primaryarms.

>>29310569

Interesting.

You could...get another set of BUIS. I guess.

File: WP_20151114_003[1].jpg (2MB, 2483x1728px) Image search: [Google]

2MB, 2483x1728px

I really should get a variable power optic someday.

File: IMG_20160317_110355010.jpg (4MB, 3518x2036px) Image search: [Google]

4MB, 3518x2036px

>>29310576
I'm gonna use my disinclination to buying Troy products as an excuse to save some money for ammo - thanks for the info though. Hey let us know how they work for you, maybe I'll break down one day

>>29310570
That's good at least

File: 20151223_143705.jpg (3MB, 3868x2176px) Image search: [Google]

3MB, 3868x2176px

>>29310593

Your front sight is already a Troy silly.

I have the same one.

>>29310589
I will, shit.

File: IMG_20160315_130211052.jpg (4MB, 2814x1644px) Image search: [Google]

4MB, 2814x1644px

>>29310601
I know, we had this discussion

Fact is, even if I totally want a flip up front, I don't need it. That's why I'm trying to cling to troy hate now that I've discovered it

Also, I've concluded 20 round pmags are not aesthetic. Really hungry for a Lancer or something clear...

File: 20160306_133647.jpg (493KB, 685x914px) Image search: [Google]

493KB, 685x914px

>>29310550
HW style front sight picture? Yeah I think the Troy ones have that. You really should try flip up fronts. I don't understand how so many people retain fixed front sights while using a red dot. Even if you're lower 1/3rd cowitness you're still covering a a lot of the FOV.

My Aero and Hardened Arms upper fit together real tight. My PSA and Hardened Arms has quite a bit of wobble.

>>29310560
Keeping your cool. I like it.

>>29310576
Bingo I thought it was Troy. Amazon has some cheap $25 knockoffs if you just want to try it out.

>>29310593
I really think you'll enjoy clearing up the FOV and sight picture by getting a flip front sight.

File: 20160214_005131.jpg (731KB, 1080x1920px) Image search: [Google]

731KB, 1080x1920px

>>29310627

Carry on then.

>>29310631

Ah. I see. Either way, doesn't really matter. I think YHM makes H&K styled irons too if you actually want them.

As it stands, I'm debating just building a whole new upper with folding front sights so I don't have to replace the ones on this rifle.

And by debating I mean I don't have the pocket chedder for it right now, but it's on the list.

I like aluminum 20 rounders, but make it plastic and it's suddenly gay.

>>29310645

I spend way too much time here to get angry at people who want to be dumb very loudly.

File: IMAG0849.jpg (4MB, 1520x2688px) Image search: [Google]

4MB, 1520x2688px

>>29308660
I like Eotech's reticent best, wish more companies had more than just a dot

File: IMG_20160315_005908720.jpg (3MB, 5119x2825px) Image search: [Google]

3MB, 5119x2825px

>>29310650
good to know thanks

>>29310645
I think the majority of AR owners are working with a standard A2 FSB...so a fixed front isn't unprecedented. In fact, I'm partial to milspec ergos/manual of arms, so not having to mess with a front sight is actually kinda comforting.

Time will tell...

>>29310682
Maybe holosun? There was somebody in here with a circle dot reticle. I even think you could toggle the outer 65moa circle and just have the dot

>>29310426
Why do you have such a high speed looking foredonger and an a2 grip? Your rifle looks confused and backwards.

File: october1.jpg (1MB, 2560x1440px) Image search: [Google]

1MB, 2560x1440px

Replaced my BCM dongle with a Magpul K2. Much more /comfy/ but no pics yet.

>>29310699
kek what retarded company made a rail with the keymod backwards?

File: IMG_20160315_005919563.jpg (3MB, 4676x2988px) Image search: [Google]

3MB, 4676x2988px

>>29310707
I guess it's kinda why I keep my glock completely stock - I want a translatable manual of arms, which pretty much means austere milspec ergos
>nothing ambi
>nothing extended
>nothing lightened
I don't want to train with crutches, pick up somebody else's, and blame the gun if I'm shitty with it

>>29310733
Sides are backwards so accessories don't fall off if I bump into a wall or something. The bottom ones are standard to accommodate directly attachable grips

good eye though anon - manufacturer is radical firearms if you were legitimately curious

>>29310560
hows the bonsai tree coming along

>>29310785

Haven't planted it yet. Not sure where I want to put it. I would put it on my desk, but I dunno if these things actually require natural light....in which case it would not work.

>>29310565
Adjustable gas blocks are mostly used alongside suppressors, since there's a significant pressure difference when running suppressed vs. unsuppressed. If you don't plan on using a suppressor any time soon, there's no need for an adjustable gas block. Just make sure you get the right diameter for your barrel, most are .750 but a few of the lighter-profile barrels use .625 diameter.

>>29310800
i had one for a couple months awhile ago but my cat ate it :c

File: image.jpg (2MB, 2592x1936px) Image search: [Google]

2MB, 2592x1936px

All done!

File: image.jpg (232KB, 687x2390px) Image search: [Google]

232KB, 687x2390px

>>29310865
Dammit

>>29309606
Noice

>>29310699
>>29310733
Wow I just noticed that. What the hell is with that.

>>29310873
HK did it that way too

File: IMG_20160304_230138.jpg (3MB, 2988x5312px) Image search: [Google]

3MB, 2988x5312px

>>29310907
srsly

File: IMAG0850.jpg (3MB, 2688x1520px) Image search: [Google]

3MB, 2688x1520px

>>29310870
I like it

File: mr556A1-SD.jpg (94KB, 1142x442px) Image search: [Google]

94KB, 1142x442px

>>29310923
Srsly

File: 1458276808615.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

>>29310923
dont compromise on me

>>29310970
>>29310923
Technically it's "HKey" not Keymod though

File: IMG_20160315_130329007.jpg (4MB, 2922x1644px) Image search: [Google]

4MB, 2922x1644px

>>29310970
>>29310982
Wow I learned something today. thanks

>>29310973
oldfag is that you?

File: IMG_20150824_153125546 (1).jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>29311009
>>29311021
s'okay stendobro, deep breaths

File: 1458275667905.jpg (2MB, 3094x1740px) Image search: [Google]

2MB, 3094x1740px

>>29310995
!
no
i got this time
#2old

>>29310948
Thank you <3

>>29311058
>those disgusting fat hands
Get out of here you fat piece of shit.

File: IMG_20160314_165648232.jpg (2MB, 5240x2445px) Image search: [Google]

2MB, 5240x2445px

>>29311052
Have you thought about painting your VP9 to match the accents? I think it would be sexual

File: 20160306_134548.jpg (1MB, 1632x1224px) Image search: [Google]

1MB, 1632x1224px

>>29310865
Looks good to me mate!

Going to a gun show today. Hopefully I can find some used PMAGs.

>>29311058
Fucking fatty go exercise

>>29311083
This gun would look so sexy with an AFG and a flip up front sight.

>>29311082
>>29311087
McFucking Kill yourself

File: image.jpg (146KB, 640x960px) Image search: [Google]

146KB, 640x960px

>>29311082
>>29311087
They're that bad?

File: 2016-02-12 11.28.40.jpg (916KB, 3501x1968px) Image search: [Google]

916KB, 3501x1968px

>>29311083
I have and I will this summer.
qb has his painted and I think it's tits.

File: IMG_20160314_231810263.jpg (4MB, 5312x2988px) Image search: [Google]

4MB, 5312x2988px

>>29311097
closest we're gonna get for now

don't fret though it's a work in progress

File: 20160306_140655.jpg (1MB, 1632x1224px) Image search: [Google]

1MB, 1632x1224px

>>29311058
With all due respect friend I very much like your rifle and have a great deal of admiration and camaraderie with you simply because you're a fellow firearms enthusiast, but please consider the importance and significance of leading a healthy lifestyle. We only have one body, and our bodies are what carry us through this short, brief, and wonderful life, why not take care of it so that it can best serve you.

Simply cutting down on beer or cutting out soda can make a world of difference. If you can avoid processed and fast foods you're already on a good track. Throw in some cardiovascular exercise a few times a week and I can promise you that you'll begin to see results.

Please consider it friend. There are many resources out there for you to use, the last thing is simply making the decision to start changing your lifestyle.

File: abhbahabh.jpg (97KB, 1193x782px) Image search: [Google]

97KB, 1193x782px

hi /k/

I have the UTG pro 15 rail which came with two picatinny rail sections installed. I'm getting a bcm gunfighter vertical grip 3, should I get the picatinny version and mount to the rail (circled in pic) or take the rail off and buy the keymod version?

>>29311176
I think the angle of that photo is a bit bad, sausage fingers are in my family as well as me being overweight, I'm currently around 30% body fat, weighing 260, I would like to get to 220 or 215 at >20% body fat. I lost 10 pounds about a week ago, and I have been cutting back on food.

File: M4PRO_5.jpg (2MB, 2448x3264px) Image search: [Google]

2MB, 2448x3264px

>>29308660

>reticle

based PRO

File: IMG_20160317_110601203.jpg (4MB, 4975x2249px) Image search: [Google]

4MB, 4975x2249px

>>29311157
really lookin forward to seeing it

>>29311176
this was inspiring and I'm not even fat

>>29311189
get the keymod version and have a spare rail section if you're trying to stretch your dollar

>>29310472

could easily mean paramedic, or something else, but do continue being an assmad stolen valor faggot

>thank you for your cervix

File: 5.jpg (101KB, 1192x879px) Image search: [Google]

101KB, 1192x879px

>>29311232

not so much worried on the price as I am with sturdiness and long term reliability.

On one hand the rifle came with these mounting blocks to be used, but on the other why not just attach two pieces together instead of having a 3rd unnecessary piece holding them together.

>>29311256
I was also gonna mention the 'points of failure' philosophy, and agree it makes more sense to cut out the middle man (rail)

I'm confident that the direct-attach grips are just as sturdy, if not more, than using the rail intermediary

>>29311256
Plus if you rely on the rail, you can only put it on the rail (obvious, I know)

With the keymod version and an empty bottom, you can easily experiment with the full length to determine the best position for yourself

File: 20160319_100032_HDR-1.jpg (1MB, 2776x1801px) Image search: [Google]

1MB, 2776x1801px

>>29308660
In for best state in the union

Medium tier optic for first AR build?

Something that will let me into 400 to 500 yd range, maybe yote hunting.

Have been practicing with iron sights up until now, ready to upgrade

>>29308660
Where was this pic taken?

File: 2.jpg (144KB, 1210x915px) Image search: [Google]

144KB, 1210x915px

>>29311297
>>29311316

I agree, thanks for the advice.

>>29311338
What is the best state in the union?

>>29311338
What part of wa you in?

>>29311340
Budget?

>>29311341
Outside of sultan, wa

>>29311447
Pb, you're a wa fag?

Hell yeah comrade, best state indeed

>>29311503
Yes sir, snohomish county master race. Where you at?

File: image.jpg (1MB, 2592x1936px) Image search: [Google]

1MB, 2592x1936px

Homemade apple juice guys

File: 654613512.jpg (476KB, 1143x857px) Image search: [Google]

476KB, 1143x857px

>>29311338
In for best State in the Confederacy.

>>29311447
No budget really, folks pointed out that this is something I can obviously keep and move around between rifles and builds.

File: 3.jpg (128KB, 1218x909px) Image search: [Google]

128KB, 1218x909px

>>29311554

im ok with this

File: 20160212_143353.jpg (730KB, 1080x1920px) Image search: [Google]

730KB, 1080x1920px

>>29311571

How do you like that short throw safety?

>>29310827

;_;

>>29311562
do you have an idea of what you want? 1-4x, 1-6, fixed 4x maybe something higher

>>29311526
>>29311562

Live in Seattle and shoot at Kenmore and Issaquah

>>29311578
1 to 6 sounds pretty good.

File: snow.jpg (753KB, 1040x1280px) Image search: [Google]

753KB, 1040x1280px

>>29311579
>shoot at Kenmore
i wonder if we have seen each other before

there is a 100yd innawoods spot in sultan i mainly shoot at- 47.922164, -121.753788

>>29311585
ok give me a sec

RIP M90bro

>>29311576

is that what its called? At first I thought something was wrong since it wasn't seated at right angles.

it feels stury and its ambi which is nice, but honestly I started on a Glock and learned to shoot using your brain/finger as a safety so I haven't found myself actually using it much. mind you I just got the rifle recently and have shot it maybe twice so far

File: 20160112_165620.jpg (3MB, 4096x2304px) Image search: [Google]

3MB, 4096x2304px

>>29311620

I used to be a brain safety kind of guy too, but on the AR it's so convenient it's become second nature for me.

Things you use the safety on:

ARs
1911s
Every other gun (if you are a bitch) (this is sarcasm).

Safeties are for unsafe people.

File: 65464613135143615.jpg (826KB, 1632x1108px) Image search: [Google]

826KB, 1632x1108px

>>29311571
Sic Semper Tyrannosaurus brother.

File: 20160319_094016-1.jpg (1MB, 1892x2642px) Image search: [Google]

1MB, 1892x2642px

>>29311353
Oregon
>>29311433
That southern part that isnt controlled by Seattle

>>29311585
sorry had to take a shit. check out vortex they have a few 1-6x models (goat warranty if you are really gonna opr8), trijicaon, leupold, swarovski

>>29311681
no its controlled by portland :^

>>29311602
I'm a lanky retard with a WASR. Soon to be retard with AR.

File: 1345653333553.jpg (49KB, 1001x1001px) Image search: [Google]

49KB, 1001x1001px

Are these bipod-grip combos worth the 10 bucks I'm seeing them for? Buying my first AR and I'm stuck between getting a grip or a bipod.

File: 20160319_093000-1.jpg (2MB, 2981x1677px) Image search: [Google]

2MB, 2981x1677px

>>29311714
Portland > Seattle

I like Kenmore cause it's close and Issaquah because people smoke and burn furniture in barrels.

Ultimately want to find a range that's at least 400 if not 600 but realize I'll have to travel for it

>>29311735
If you're seeing them for $10, they're probably a knockoff.

The real grip pods run for quite a bit more. They're okay, but depending on the situation the bipod can be a bit tall. I have a legit one, but I never use it.

File: IMG_0980.jpg (574KB, 1224x1632px) Image search: [Google]

574KB, 1224x1632px

>>29311717
dont think ive seen any aks in my time there, i mostly shoot in sultan cause kenmore has some gay af rules and costs money

>>29311741
that may be true but ill stick to muh small towns. big cities can eat a dick

>>29311748
these guys have a 600yd range
http://www.cascadeshootingfacilities.org/
their membership is capped though. i need to find somewhere innawoods to shoot 4-600

>>29311775
The mag limit is gay af.

I will check out the vortex stuff, thanks for the rec

File: 20160319_092640-1.jpg (2MB, 2981x1677px) Image search: [Google]

2MB, 2981x1677px

>>29311775
Agreed tbqh

What's that online MOA calculator some of you use?

File: 7.png (411KB, 587x563px) Image search: [Google]

411KB, 587x563px

>>29311991
its called OnTarget

>Think I have all my tools, parts, etc ready to build from an 80%
>realize I haven't even bought a stock or buffer tube
There's always something else.

>>29312049
Always :^)

Kinda on this note:

What are the optimal buffer weights and gas lengths for AR pistols? How short before it gets unreliable?

File: satern.jpg (33KB, 880x660px) Image search: [Google]

33KB, 880x660px

Okay, so with a lot of research and thought, I've nearly completed my build list for my 6.5G precision rifle. I'm tentative in posting this list because I realize some of these parts aren't 100% compatible.
Any suggestions as to shave weight, recoil.
Money is the only thing that will decide how soon this build comes to life and I am a patient man if it means getting a dream rifle.

LowerReciever - 80% Lower OR BDR-15-3G BILLET MATCHED RECEIVER SET
LPK - (Stag Arms LPK)
Grip (Magpul MOE-K® Grip – AR15/M4 - 2.4oz - $19.95)
Trigger (timney) OR (GEISSELE SSA-E - $240)
Buffer - MGI® RATE REDUCING BUFFER W/ D-RING - Reduces Recoil
buffer spring (Super Duty Chrome Silicon Buffer Spring $21)
buffer tube V SEVEN HEAVY BUFFER TUBE - 9.6oz - $117)
Stock (MFT BattleLink Minimalist Stock - 5.8oz)

Upper Reciever (Vseven Upper Assemply - 7.7oz - $210)
BCG (7.62x39) Cryptic Coatings Mystic Black - ~12oz - $310 (M16)
Charging Handle - AXTS Raptor - 1.3 - ($94~)
Rail(free floating railed)
Barrel - Satern 6.5 Grendel/.264 LBC/12.7x42mm ~$448
Gas Block (still deciding)
Gas Tube ~$10 (still deciding)

Other Parts for consideration

FS8 Forend Nose Cone .96oz - Stability in Anchoring - Looks so sexy.
Magpul BAD Lever - addresses bolt catch malfunction? uh...
AFAB Hybrid Muzzle Brake 3oz
sights (magpul pro MBUS)
Optic (redfield counterstrike red dot) OR (AIMPOINTMICROH1)
sling system (magpul)
ambidextrous safety

Many thanks in advance.

>>29312131
>precision rifle
>red dot

>>29312131
>precision rifle
>Minimalist Stock

>>29312131
>precision rifle
>expecting me to read all that shit

>>29312131
>precision rifle
>magpul sling

>>29311677
make some new porn of your larue bag, homie.

>>29312131
>>29312175
>>29312185
>>29312208
>>29312227
looks like ya got some things to work on

>>29312131
>>29312175
>be willing to spend 6 Gs
>red dot

For what purpose?

>>29312290
6.5 grendel GOAT precision at 25 yards? :^)

>>29312290
i think the 6.5G is for 6.5 Grendel not 6.5 thousand

Does anyone know of a good knockoff of this sight?
http://www.amazon.com/gp/product/B0051T8UT8/ref=s9_simh_gw_g200_i2_r?ie=UTF8&fpl=fresh&pf_rd_m=ATVPDKIKX0DER&pf_rd_s=desktop-1&pf_rd_r=1W4JK8837J2K03SY63C0&pf_rd_t=36701&pf_rd_p=2437869742&pf_rd_i=desktop
I'm not gonna pay $90 for a little piece of metal but I like its look a lot

>>29312350
>but I like its look a lot
yuck

>>29312350
Don't buy knockoff sights.

>>29312350
You're gonna have a bad time

>>29309779

Not even aesthetic, the a2 grips are horrible to hold.

File: 546541651651651651.jpg (299KB, 819x1163px) Image search: [Google]

299KB, 819x1163px

>>29312233
As requested dude. Fuck Mark Larue and this shitty Larue™ bag that Mark Larue made.

0/10 - Will not close with doge in it

File: image.png (637KB, 750x1334px) Image search: [Google]

637KB, 750x1334px

Is this sexy enough?

>>29312628
Why anyone would ever need a military style assault canine is beyond me.

>>29312656
Not with that mag

>>29312656
For 2003 yeah

File: dogsec.jpg (429KB, 778x853px) Image search: [Google]

429KB, 778x853px

>>29312660
Hate to be a stickler, but it's a recce canine.

File: pupper vest1.jpg (998KB, 1224x1424px) Image search: [Google]

998KB, 1224x1424px

>>29312628
doge vest when

File: 4968465161568138131351.jpg (525KB, 1306x802px) Image search: [Google]

525KB, 1306x802px

>>29312656
Yes.

>>29312671
I have black PMags as well

File: 65416846846518.jpg (297KB, 1040x980px) Image search: [Google]

297KB, 1040x980px

>>29312690
He's got a mountain/trail harness for covering terrain, don't think I'll ever force molle on the pup, he's got enough ass burgers as is.

>>29312738
that bow tie is pretty pimpin

>>29312787
shut the fuck up tripnigger

File: IMG_0729e.jpg (2MB, 1920x1080px) Image search: [Google]

2MB, 1920x1080px

>aesthetic intensifies

File: tfw.gif (681KB, 800x800px) Image search: [Google]

681KB, 800x800px

>>29312787
He's a hit with the ladies.

>>29312806
10/10 post would read again

>>29312807
picture related

File: smug.png (726KB, 926x663px) Image search: [Google]

726KB, 926x663px

>>29312806
no

File: image.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

>>29312807
A E S T H E T I C

File: Mark ass 12.png (978KB, 1005x434px) Image search: [Google]

978KB, 1005x434px

>>29312857
~-[__A__E__S__T__H__E__T__I__C__]-~

File: IMG_0724.jpg (2MB, 1920x1080px) Image search: [Google]

2MB, 1920x1080px

>>29312857
How do you like that KDG mount? They're pretty neat

File: 1.jpg (774KB, 1984x1214px) Image search: [Google]

774KB, 1984x1214px

Barrel is in.
Aesthetic?
Weighs 90.4oz empty, 5.65lb.

>>29312888
bretty gud so far :DDD

>>29312891
Seekins rails are disgusting but other than that it's pretty nice

>>29312899
Wait that's not a Seekins

It's still an ugly rail though but other than that it's like a 7/10

File: 4wfL3HO.jpg (107KB, 1024x493px) Image search: [Google]

107KB, 1024x493px

>>29312857
>>29312882
-------{[| A - E - S - T - H - E - T - I - C |]}-------

File: ahnod.png (128KB, 272x285px) Image search: [Google]

128KB, 272x285px

>>29312909
these aesthetics are not pleasing at all

File: IMG_1157.jpg (1MB, 1224x1632px) Image search: [Google]

1MB, 1224x1632px

A E S T H E T I C

E

S

T

H

E

T

I

C

File: 1.jpg (270KB, 1984x1488px) Image search: [Google]

270KB, 1984x1488px

>>29312908
Yeah, it's a Matrix Aerospace rail.
Barrel nut is a 0/10 for design.

File: Master Race.png (561KB, 791x295px) Image search: [Google]

561KB, 791x295px

>>29312909
()A()E()S()T()H()E()T()I()C()

File: mk12 modHOLLAND.jpg (308KB, 800x597px) Image search: [Google]

308KB, 800x597px

literal peak aesthetics

File: 88826517-7aa7-4238-9869-65f7e2af3201_16x9_600x338.jpg (66KB, 600x337px) Image search: [Google]

66KB, 600x337px

>>29312994

>>29312994
peak garbage

File: Holland4_zpsd8041439.jpg (71KB, 1024x400px) Image search: [Google]

71KB, 1024x400px

>>29312994
Not with that ugly Magpul stock it's not

File: 1368926538290.gif (1MB, 720x480px) Image search: [Google]

1MB, 720x480px

>>29312994
>mk12
>not an a2 stock

File: PROBLEM.gif (301KB, 136x240px) Image search: [Google]

301KB, 136x240px

>>29313038
>>29313053

>>29313054
a1 is best imo

>>29313074
play the original video at 1/2 speed, it's worth it bro

File: mk12 .jpg (720KB, 1024x845px) Image search: [Google]

720KB, 1024x845px

>>29313071
a2 was not the only stock used

>>29313079
to much work

File: welp.gif (1MB, 297x200px) Image search: [Google]

1MB, 297x200px

>>29313074
Well, at least you have partially master race mk12 configuration tastes.

File: IMG_20160315_010007935.jpg (3MB, 5312x2438px) Image search: [Google]

3MB, 5312x2438px

>>29312891
Nice. What length gas system? Buffer weight?

File: imean...ok.gif (2MB, 300x264px) Image search: [Google]

2MB, 300x264px

>>29312909
wat the shit

File: a1 maybe.jpg (624KB, 1632x1224px) Image search: [Google]

624KB, 1632x1224px

>>29313113
should i throw it on muh rifle?

File: breaking-news (1).png (281KB, 640x360px) Image search: [Google]

281KB, 640x360px

>>29313171
With an ACOG I like it, A2 was made for generals and giraffes.

>>29313191
alright ill try it out. gotta paint a lower first

>>29313121
Carbine gas, basic (carbine?) buffer.
Haven't shot it yet, need the gas tube roll pin.
Will hopefully be able to shot it tomorrow.

File: muh rifle.jpg (2MB, 1334x1334px) Image search: [Google]

2MB, 1334x1334px

meme magazine

File: 20151219_084126.jpg (329KB, 1920x1080px) Image search: [Google]

329KB, 1920x1080px

>>29313296
>meme magazine
do you even meme ?

File: 22416update.jpg (1MB, 2688x1520px) Image search: [Google]

1MB, 2688x1520px

did someone say

A E S T H E T IC

File: _MG_1466 resize.jpg (3MB, 2136x1424px) Image search: [Google]

3MB, 2136x1424px

Fixed irons + 20 rounders = A E S T H E T I C

File: DSC_7888.jpg (1MB, 2400x1600px) Image search: [Google]

1MB, 2400x1600px

>>29313296
>meme magazine
i will come to you house and rape you

>>29313268
Gotcha let us know how it goes. I presume the barrel has a carbine (larger?) gas port?

And bear with me but, how long is your buffer tube?

File: 1.jpg (740KB, 3940x1412px) Image search: [Google]

740KB, 3940x1412px

>>29313323

>>29313323
>Fixed irons
ew

>>29313296
>hating on memeazines

File: 0307update2.jpg (1MB, 3008x2000px) Image search: [Google]

1MB, 3008x2000px

so why are 15" rails on 16" barreled guns the best aesthetic?

File: 067836524.jpg (366KB, 2392x801px) Image search: [Google]

366KB, 2392x801px

>>29313416
Barrels are uggo.

>>29313416
did you have baby

File: different lower.jpg (410KB, 1629x741px) Image search: [Google]

410KB, 1629x741px

look good or nah?

File: Queen.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>29313444
Use foot as stock.

File: IMG_20160318_000234640.jpg (4MB, 5312x2988px) Image search: [Google]

4MB, 5312x2988px

>>29313444
real nice get but no thanks on the A2

>>29313431
yassssssssss

she's so stinkin' cute

pics to come

File: 1454439013777.gif (480KB, 250x309px) Image search: [Google]

480KB, 250x309px

>>29313460
i dont have scar money

>>29313476
>A2

>>29313491
>pics to come
cool, what name did you go with?

>>29313525
Remington Grace. Me and the fiancé have been sold on it for the past few months.

she came late last night and was 6 lbs 10 oz, 21 inches long.

feels weird to be a dad now haha

File: Witcher_panels.jpg (2MB, 2988x1681px) Image search: [Google]

2MB, 2988x1681px

>>29313539
Congratulations. I hope to be having kids in the next few years myself.

File: DSC_8277.jpg (2MB, 2400x1600px) Image search: [Google]

2MB, 2400x1600px

>>29313525
>i dont have scar money
why even

File: IMG_20160318_000513091.jpg (4MB, 5312x2305px) Image search: [Google]

4MB, 5312x2305px

>>29313525
sue me browe

actually don't, you're looking at my savings

>>29313586
no job senpai

whats the best drop in rail to buy? I only need space for a weapon light. not a fan of MOE

File: me&babby.jpg (178KB, 1920x1920px) Image search: [Google]

178KB, 1920x1920px

babby pic related

File: 647b84f6bb98afe21f0d283b9bc91a41.jpg (15KB, 253x255px) Image search: [Google]

15KB, 253x255px

>>29313632
why even

>>29313569
Why tho

>>29313686
Congratulations man!

>>29313646

pls.

>>29313646
what do you have now?

>>29313702
lets just say i went into a field with very limited job opportunities

>>29313686
Nice.
>>29313708
Because my wife and I want a family.

>>29313736

MOE

>>29313752
daniel defense

>>29313785

i dont think DD makes any drop in rails

>>29313743
Alright
Hopefully it's good for you.
I just can't understand the drive to have kids.
I'm too selfish for it or something I guess.

>>29313816
think again

>>29313828

how old are you

>>29313838
18

>>29313962
wait a few years and things will definitely change

>>29313962

You might change your mind then. I didn't think I wanted kids for the longest time, when I turned 23 or so I started thinking, I could go wither way, now I'm 27 and I definitely want kids.

You may never want them, all I'm saying is it might be too early to tell.

File: witcher_panels_2.jpg (1MB, 2988x1681px) Image search: [Google]

1MB, 2988x1681px

>>29313987
This.

File: 1457967954799.jpg (1MB, 2100x1181px) Image search: [Google]

1MB, 2100x1181px

>>29313987
>>29314006
or not, i'm 24 and hate kids.
i can't wait for the day that people are born in their late teens/early 20s.

gucci bcg>children

File: 0307update.jpg (1MB, 3008x2000px) Image search: [Google]

1MB, 3008x2000px

I can't wait to buy her a little .22LR rifle. I'm getting so excited just thinking about it years from now

File: IMG_3703.jpg (22KB, 400x400px) Image search: [Google]

22KB, 400x400px

>>29314028

>cant wait for the day that people are born in their late teens/early 20's

File: 546165136153651363513651.jpg (557KB, 1620x850px) Image search: [Google]

557KB, 1620x850px

>>29313736
Screw your degree, get a job in sales. Underwater basket weaving will get you in the door, ability to make a shit load of money in very short order in the right industry with the right company/product/service.

File: image.jpg (111KB, 744x489px) Image search: [Google]

111KB, 744x489px

Just came home from the Local gun store....

Did I do good :)?

>>29314073
Sure.

Looks like a nice rifle.

>>29314073
looks interdasting. what is it?

>>29314073
Who knows
I don't know shit about guns

>>29314118
It's an LWRC M6IC-DI
LWRC's Direct Impingement rifle

Ordering myself a shiny new Aimpoint for it now.

File: Bailey.png (2MB, 1488x928px) Image search: [Google]

2MB, 1488x928px

>>29314028
>>29314051
They'll be literal manchildren. Just imagine having the ability to shitpost from birth.

File: image.png (684KB, 1334x750px) Image search: [Google]

684KB, 1334x750px

>>29313686
Cool baby

>>29314056
i dont have a degree, im a wastewater treatment plant operator. gib job

>>29314134
lwrshit? almost as good as a m&p sport.

>>29308694
What loads did you use for doge?

>>29314144
>...pb !fo0TPIZZAY
>03/19/16(Sat)18:23:50 No.29314144
>>>29314056 #
>im a wastewater treatment plant operator.
Is that a funny way of saying "Professional Shitposter"

>>29314135
>>29314051
i meant, fully functional adults.
not baby brains at 20

>>29314144
Haha just end every resume with gib job. I'd give you an interview just on that.

Well then screw your background if there's no work. Sales brother, sales. Sales. That or since you have an operations background look at operations management. Bullshit management is a skill that crosses industries.

>>29314153
kek no im state certified just no job ;_;

i do my fair share of shitposting though

>>29314165
ill move to Virginia and sell shit for you

>29314150
>lwrshit? almost as good as a m&p sport.
Nigga please

>>29314152
Hugs, pets, and kibble.
>>29314164
>wheredoyouthinkyouare.jpg

File: 20160319_183307.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>29314183
Gross I'm not much for hunting puppers I usually trap them with food from there I can domesticate them and keep them as wolf things

File: 20160319_170603.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>29311741
How were the woods last night?

How is that lucid magnifier?

>>29311921
Nice innawoods picture!

>>29312891
Hell yeah dude!
Is that with the muzzle device on?

>>29313111
The bottom one literal looks like a lasgun.

>>29313296
Cool picture.

>>29313686
Congrats dude!

>>29314073
Yes very. How much was that?

Got back from the gun show. Picked up 19 magazines.

I got 9 brand new US GI aluminum ones with green followers. They honestly feel like shit but were the right price and have 2007 date markings. I got one D&H Aluminum with green follower and a 2012 date mark, I got one PMAG with a February 2013 date mark, and I got 8 super sweet MAKO made in Israel steel mags with 2003 date marks. All brand new.

>>29314173
Well I've interviewed for a half dozen jobs in the last couple weeks, I'm not employing anyone. Maybe if I end up incorporating and going out on my own I'd have something.

>>29314245
It was $1650

The PRO's I already owned.

>>29308660
Can someone explain me the .223 Wylde when it comes to barrels?

File: image.jpg (473KB, 3149x880px) Image search: [Google]

473KB, 3149x880px

>>29314266
good luck to ya m8

>>29314285

$1650 for a straight up DI AR? Yikes!

>>29314337
556 can shoot both 556 and 223 safely. It doesn't shoot 223 very well though.

223 chambers can not shoot 556 safely.

Wylde chambers can shoot both 556 and 223 safely. It shoot 223 better than a 556 chamber does but not as well as a 223 chamber.

>>29314355
Oh, so Wylde is a chamber spec then?

>>29314370
Yes. Same with 223/556. Get wylde if you shoot a lot of 223 and 556 otherwise a 556 will be fine

>>29314245
Gud. No spooks and my red dot held its zero close enough.

File: 1458428159095435421375.jpg (2MB, 2688x1520px) Image search: [Google]

2MB, 2688x1520px

>>29314245
Nice A2 brah.