[Boards: 3 / a / aco / adv / an / asp / b / bant / biz / c / can / cgl / ck / cm / co / cock / d / diy / e / fa / fap / fit / fitlit / g / gd / gif / h / hc / his / hm / hr / i / ic / int / jp / k / lgbt / lit / m / mlp / mlpol / mo / mtv / mu / n / news / o / out / outsoc / p / po / pol / qa / qst / r / r9k / s / s4s / sci / soc / sp / spa / t / tg / toy / trash / trv / tv / u / v / vg / vint / vip / vp / vr / w / wg / wsg / wsr / x / y ] [Search | Click for more| Home]

Its been a long time since I've posted a thread on /k/.

This is a blue board which means that it's for everybody (Safe For Work content only). If you see any adult content, please report it.

Thread replies: 331
Thread images: 53

File: Lower-Designs.png (226KB, 600x203px) Image search: [iqdb] [SauceNao] [Google]
Lower-Designs.png
226KB, 600x203px
Its been a long time since I've posted a thread on /k/. I'm not even that sure about posting now, but fuck it. If I'm going to post, tonight's the night to do it.

The last one and a half years have been a wild, unexpected, and absolutely wonderful ride. Nugget Enterprises has grown from an inside joke into a brave, promising start-up. Wholesalers who once stuttered our name hesitantly now call us first when they get a container. Sometimes, the ridiculousness of it all catches up with Warehouse Ivan and me. In the middle of packing, we'll both end up on the floor of the warehouse laughing. Why? Because 4chan started a business, and it worked.

I'm here tonight because of tomorrow. Tomorrow we send out the check and start production on the 80% AR lowers. It is without a doubt, the single biggest and riskiest thing the company has ever done. It is also a milestone marking the start of some very significant changes for us. Right now is the last possible moment that we could reasonably turn back. We are teetering on the edge of possibilities and commitments that will mark us for years to come.

It means a lot to me that we've been able to come this far; that's why I'm posting here tonight. I want to hear from you now, before we've jumped off that ledge. Criticism, comments, questions, and suggestions. I will read everything.

What do you want to see from us and what should Nugget Enterprises be?
>>
>>22572692
OUR SAINTLY VASSALS OF THE /K/UBE HAS COME AND HONOR US WITH THEIR WORDS AND PRESENCE!
>>
>derp 4chan

People give 4chan all kinds of shit, but this board alone has you guys, 2 or 3 teams of weapon designers, a couple more startups, a vidya developer and some other things. That's not counting Katawa Shoujo from /v/, all the homebrews /tg/ came up with and God knows what else from the other boards. We get shit done.
>>
>>22572692
we love you and that's saying a lot being this is /k/. we will support you for years to come! now,onto what we want to see you produce next...tactical shit! I saw a guy not to long a go at a gun show selling genuine Russian tactical gear,weapon accessories,sights,etc etc etc
>>
How drunk are you? And congratulations, i hope it goes well for you.
>>
>>22572692
I love you :3
Please give us more surplus
>>
>>22572692
I like #1, #2, and #4. What calibers will the lowers be available in?
>>
File: haha.png (116KB, 1217x611px) Image search: [iqdb] [SauceNao] [Google]
haha.png
116KB, 1217x611px
seriously??
>>
>>22572692
I thought those were engraved lighters for a second.

NE lighters when?
>>
>>22572788

Oh, and adding onto this: Work out something with Warfairy and the other people here and distribute their goods. And Russkie tacticool things would be nice too.
>>
>>22572692
You make me smile and I am happy to support your business friend.
>>
>>22572692
Can you do pony engravings on the 80% lowers by request?
>>
>>22572692

I love you Ivan, and Warehouse Ivan too!
>>
Why don't I see ads for you guys on /k/ anymore?
>>
>>22572692
NE brand ammo when?
>>
File: serb ruck.jpg (16KB, 300x300px) Image search: [iqdb] [SauceNao] [Google]
serb ruck.jpg
16KB, 300x300px
>>22572692
WE LOVE YOU NUGGET ENTERPRISES

But in all truth i wouldnt mind some more Serbian surplus, its supposed to be pretty cheap, so why not? i'd buy a serb ruck from you guys
>>
>>22572692
Finally. I have been waiting for this for a long time.

What do you think the per unit cost is going to be?
>>
>>22572788
Shoutout to Plush Armory!
>>
AR LOWER HYPE

Also, when are we getting more Coolmax shirts? I need some for the gym.
>>
>>22572692
6061 or 7075?
how much for #4?
1, 2 and 3 scream "I'm an autistic manchild neckbeard" a little too much for me.
>>
>>22572692
You have to keep going to see what happens.
>>
>>22572692
You know what, I will probably buy an AR because of you. I'd go for option 3 Nothing says fuck yeah like an SKS on an AR
>>
I almost wish i live innadesert sot that I'd have an excuse to buy some of that desert DPM.
>>
>>22572692
Good luck and Godspeed!
>>
>>22572788
i know i will get shit for this, but even /mlp/ has shit going as well. Hell they are making some bigass visual novel. This place is a powerhouse of creation
>>
WE LOVE YOU IVAN(S).

PLEASE CONTINUE TO DELIVER US QUALITY MILSURP AND FOR THE LOBE OF ALL THAT IS HOLY GET SOME RHODESIAN IN SOON.
>>
>>22572866
>everyday "look what I got from NE"
I get my guns and ammo from Fred Meyer, how weird would that be if I posted "hey look what I got from Fred Meyer" Nobody gives a shit where you buy stuff from.
>>
>>22572692
Gorkas when?
>>
File: 1396797964252.jpg (3MB, 3500x2455px) Image search: [iqdb] [SauceNao] [Google]
1396797964252.jpg
3MB, 3500x2455px
>>22572692
Any possibility of doing engraving of custom submit designs and images onto various metal items?
>>
>>22572866
We are advertisements at this point. Duplication/exponential growth is a hell of a drug.
>>
i personally think 80%s are a dumb move when everyone and their mother is already doing it
>>
>>22572692
Good luck with your future anon. Keep up the good work and hopefully your new venture goes well.
>P.S. order more of those milsurp sleeping bags pls
>>
>>22572918
>Fred Meyer
mah niqqa.
Innawashington/oregon?
>>
>>22572893
>#1 and #2
>>I'm an autistic manchild neckbeard

>>>/t/u/m/b/l/r/
>>
File: Capture.jpg (121KB, 908x678px) Image search: [iqdb] [SauceNao] [Google]
Capture.jpg
121KB, 908x678px
>>22572692

You guys fucking rock. I love everything you do, and as long as you keep doing it, I'll keep letting you take my money in exchange for cool shit. Thanks for putting up with the trolls and staying committed to your vision.

>Right now is the last possible moment that we could reasonably turn back

Do it faggot. I will buy at least 2-3 lowers. Are you making all four of those designs available? Is the engraving on just one side, or both? Is it possible to get one design on one side, and a different one on the other?
>>
>>22572692
Serb surplus if you can find it, also Ruskie shit if you can find it, maybe even Zenit AK accessories if you can get a deal worked out with some Russian.
>>
>>22572692
All I can hope for is simply put more. You guys have lots of cool stuff that you don't see around that much and buying from varusteleka is well a bit of a pain. Also imho NE has better service than varusteleka.So what I'm saying is keep up the good work and keep up the supply of interesting milsurp. Also hows the rhodie shirts going?
>>
>>22572692
#1 looks pretty boss
>>
>>22572692
Maybe you guys could be a little slower in getting orders shipped out?
Sometimes I place and order and it's like holy shit, just a month later and already it's here?!?!
I need more time to prepare for all the excitement of receiving a package with faggy drawings all over it. How about giving us a good 3 or 4 months before you ship out an order?
>>
>>22572692
get Rhodesian camo.
>>
>>22572692

MY /k/ AR WILL BE AS GLORIOUS AS AMERICAN SHIT CAN GET
>>
the only thing I want is a murder/k/ube engraved charging handle for my AR with Ave Nex Alea on it. So yeah, make that happen.

Like this sort of.
>>
>>22572909

>live in Albuquerque, NM

It's so perfect.
>>
All I have to say is flare guns and Swiss bayonets.
Plus that you guys are awesome! Keep up the good work.
>>
File: 1402266131673.jpg (625KB, 1803x905px) Image search: [iqdb] [SauceNao] [Google]
1402266131673.jpg
625KB, 1803x905px
>>22572692
I fucking love you guys, but fix your janky ass website that DDoSes every time you restock. I about shit myself trying to snag an AK 80% before I thought they were going to sell out.

Also I have to thank you/say fuck you for making me start an AK build. I've been dancing around it for years ever since I had a friend die of a brain aneurysm. He was an aircraft mechanic and had all the tools you'd need. Aviation grade rivet tooling, press, welders. We were going to do that shovel head AK that I'm sure you've seen. But woke up one morning and he was dead. Sent me into a bad depression, ended up dropping out of college. I've since got a good job and generally have my life together, but there's still some dark shit in my head from that time.

Planning on stamping his initials somewhere on it. More than an honor to all the laughs and info this board has given me, it's going to be a binding of the past. Really glad you guys have been successful.

Also the Austrian pistol belt is still a fucking death trap.

Pic sort of related. I could never build something that unbelievably sexy, but damnit I can try.
>isn't worth a form 1
>>
File: image.jpg (131KB, 493x750px) Image search: [iqdb] [SauceNao] [Google]
image.jpg
131KB, 493x750px
>>22572957
Not that guy, but washington reporting in
>>
>>22572692
I like 1 and 4

Also more Czech milsurp please. I bought a handkerchief and a satchel and they're both awesome. Wish I had bought more.
>>
>>22572692
I would totally buy #4 and inlay it with red for the NE and gold for the outside bits and then rock an AR in 5.45 with red oak furniture.
>>
>>22572692
I was hesitant at first because of shipping coats and not being able to evaluate quality, but you guys were honest and up front with your descriptions and pricing. That is why I have ordered again and again.

-Mike in Wyoming
>>
>>22572832
I guess nobody cares about 128 bit encryption.
Well I guess I hope you guys subscribe to lifelock
>>
>>22572692
10/10 will buy one to put on the shelf
>>
Soviet surplus when
>>
>>22572918

It's a homegrown /k/ startup, fag. We like supporting them.
>>
>>22572983
I admit that their shipping is kinda lame but I think a lot of is that they tend to get swamped in sales and only have a handful of people to get all the packages prepared. Odds are they simply can't afford to be any quicker because that would require NE becoming more than a side job, or hiring someone.
>>
>>22572959
>implying I haven't been on 4chan for more years than you've been out of junior high
>>
File: Waiting for OP.jpg (77KB, 379x255px) Image search: [iqdb] [SauceNao] [Google]
Waiting for OP.jpg
77KB, 379x255px
>>
File: m1101.jpg (138KB, 1191x789px) Image search: [iqdb] [SauceNao] [Google]
m1101.jpg
138KB, 1191x789px
honestly just keep up the good work, being honest and having great relations with your current customer base is awesome. but i would like to see you guys expanding outside of just 4chan. if you guys want to try selling bigger surplus things like trucks and trailers and portable shelters that would be awesome, also checking those government liquidation sites if you can get stuff from any bases in your region you might find buyers. you can find these trailers for about $300 to $500 convert them to 12volt for under $100(wiring harness,light bulbs) and can sell them for up to $1000
>>
File: 1409081431572.jpg (231KB, 800x1058px) Image search: [iqdb] [SauceNao] [Google]
1409081431572.jpg
231KB, 800x1058px
>>22573090
Nobody cares about the shit you're projecting onto others. calling anything you don't like "autistic neckbeard manchild" pretty much all but confirms you as a tumblrtard, so leave
>>
>>22573076
see this
>>22572832
>>
>>22572807
Just a little sleep deprived... scouts honor.

>>22572795
>>22572845
Importing niche gear (especially ruskie) is definitely on the table.

>>22572832
The checkout form is encrypted, other elements (like the logo and surrounding website) are not. We've been audited by at least 3 different merchant providers for compliance by now.

>>22572822
No AR-10s just yet.

>>22572842
Eh, not a bad idea.

>>22572810
>>22572795
>>22572856
>>22572861
Thank you very, very much. Wouldn't be here without you.

>>22572857
I'm afraid there wouldn't be

>>22572866
Don't you worry, they'll be back very soon. I'm just saving up for something spectacular.

>>22572870
10 years if we're lucky ;)

>>22572871
I think I can source those, I'll look into it.

>>22572891
My contact on those sold 500 something units one day before I called. There are none left :(
>>
more rigs, get plate carriers of some sort, more polish surplus
>>
>>22573007

Put his initials where the fire selector markings would be (make a fake position for FA). Tons of military AK clones have weird letters there anyway.
>>
File: sad.gif (421KB, 700x525px) Image search: [iqdb] [SauceNao] [Google]
sad.gif
421KB, 700x525px
I placed an order with you a month ago and it hasn't arrived yet.
>>
>>22573113
>No AR-10s just yet.
wat

I was asking what calibers will the lowers be available in (.223, 5.56, etc.)
>>
File: 1381808207585.gif (675KB, 137x186px) Image search: [iqdb] [SauceNao] [Google]
1381808207585.gif
675KB, 137x186px
Dis gonna be gud NE. I'd vote for you to produce #1 and #2
>>
>>22573099

>selling outside of 4chan

All the cheeki-breeki inside joke shit would have to go away at best (from the outside looking in it looks like some kids came up with it) and at worst if they were to branch out they would have to cut ties with 4chan. This place has...connotations.
>>
>>22573128
AR lowers are a standard dimension. They come in normal and large frame (AR-10).
>>
>>22572923
What he said.
>>
>>22572875
>>22572857
>>22572891
>>22572898
If you want to give feedback on the lowers or see more specs please go here. I could definitely use the help when it comes to figuring out quantities tomorrow.

>https://docs.google.com/forms/d/1lRQLx0HIJbtjxPvKtXariooIU1nYkIQcXklnLlry5Ds/
>>
>>22573128

That's the same caliber. Do you even know what an 80% lower is? They don't usually even have caliber markings engraved.
>>
>>22573128
All of the 5.56/.223/etc lowers are the same. They only come in 2 flavors milspec 5.56/.223, and then AR-10
>>
>>22573120
That's a good idea. I was just going to put it under the front trunnion or something. Thanks.
>>
>>22572692
Eh I'll probably buy one. wish the NE flash was available for the akm since it would look better on it than an AR.

Raw aluminum, or will they be available with a finish of some kind?

>>22573099
Trailers might be pushing it for the budget of the average poster on /k/.

>>22572822
>>22573128

It's an AR lower, caliber is determined by the upper you slap on, with the exception of stuff like .308 win because that has a larger magwell, and specially milled lowers that can accept AK mags.
>>
>>22573128
lurk moar
edumacate yerself
>>
>>22573147
He could roll a front company that doesnt list all of the chiki briki cyka bullshit...
>>
>>22572692
love you guys. also thanks for the teaspoon, whats the story with that?
>>
>>22573232
>discounts for saying "cheeki breeki iv damke"
>>
>>22573169
>>22573191
>>22573197
>>22573211
>>22573212
thanks
>>
>>22572692
someone said there was legal trouble with rhodesian camo? whats going on?
>>
>>22573244
>normalfag orders gear from nugget fronterprises
>logistics is all the same on the backend
>normalfag gets a box with "ANUUU CHIKI BRIKI IV DAMKE! PAPALI SUKA!" and a dragon dildo drawn on it
>>
Love you NE, thanks for helps with orders and looking forward for that Rhodesian camo. It would be nice if you can get some nice Russian milsurp.
>>
Just popping in to say I fucking love my LK-35 pack. Thanks guys.
>>
>>22572894
>>22572912
That's the plan. We don't plan on slowing down. :)

>>22572914
Rhodie soon. If the lowers sell we'll have it 100% funded.

>>22572929
10pc minimum. So if ten people go to >>22573185 and pester me, maybe...

>>22572945
I would agree with you if we were selling blank 80%s, but that's not the plan.

>>22572968
Its encouraging to hear that. One of my biggest fears is getting too caught up with the mechanics of work and drifting out of touch.
As for the lowers see >>22573185
>>
>>22573315
You never answered me! Charging handle plz
>>22572995
>>
You guys are crushing it. Love to see some /k/ custom branded reproduction M65 Jackets or something.

Whatever you end up doing, keep up the good work.
>>
>>22573315

I was about to email you today. What took so long on the shipping, ordered something on the 20th and it just went out today. Not complaining though.
>>
More gasmasks please and thank you!

god damn i love me some more gasmasks
(though do check to make sure they aren't the arsenic filled ones)
>>
>>22573340
oh, you hadn't even reached it. Ignore me i'm drunk
>>
Got a call from you beautiful fuckers today about my address. But you should check your forms or whatever, because I'm pretty damn certain I entered my Apartment number in the field. Looking forward to my bandit patches.

You need to restock on Loner patches though....

Honestly though, just be the business you want to be. Keep in mind you started from fucking scratch, and your demographic loves you. Finding surplus online is usually a shitty process, and you guys do it right. I'm happy to give you my money.
>>
I bought a fleck shirt and pair of pants from you guys. Reasonably priced, broken in, fast shipping, etc. Had a little note from Ivan on the inside of the box. Keep that shit up. You've secured my business for milsurp.
>>
Ivan(s)
I went out on a limb and ordered the very first item you offered and have used it many times since (the ILBE). I've ordered something from almost ever sale since. I love you guys, I hope I'm not in over my head building this AK haha
>>
>>22573315
If you're still around, do you have an FFL already?

Designing a rifle, would take me a few years but I'd like to give you to carry.
>>
I want to py <$40 for an 80%
>>
>>22573400

See I was actually thinking about if NE got a manufacturing license.. I would thro all my money at them if they got that to hopefully influence an investment in making a U.S. svd.
>>
>>22573424
Not gonna happen. The lowest they get is 50 bucks plus shipping for blank non-engraved lowers.
>>
>>22573437
>SVD
>not AS-VAL
Do you even slav?
>>
does anyone know if these lowers are legal to have in chicago? cant really find any info online since the laws are sort of vague i think.
>>
>>22573437
>ne svd
hnnnng
>>
Other than a two ton press what else do you need to complete an AK?
>>
>>22573437
stop taunting me

my dick can't take anymore
>>
>>22572692

I'm not sure. You should make something special that no-one else makes. To me, your business is like a "bro", and I would be excited to see what a bro makes. An 80% AR lower is eh....

Look at how something like spam-can plushies caught fire:

>no one else made them. Exciting and novel idea!
>ammo sexuals loved them
>ammo sexuals bought them
>genius

You should channel into /k/'s spirit and soul and figure out what we would ejaculate thinking about, but it's something no formal business wanted to make. I don't know. I'm not opposing the expansion to larger, more common, and more serious enterprises; I'd be more than happy to spend more than triple digits on NE if I really thought it is cool.

I'm stupid so don't consider my opinion too seriously! Thanks.
>>
I thought the 80% couldn't have the selector hole drilled out already? Or was that fudd lore I heard?
>>
>>22573437
I really wanna make a decently priced simple modular rifle.

Striker Fired
3 lug bolt
Short Stroke
Ambi Charging, ejection and safety (ejection might require some more research)
Modular lower (like the MGI Hydra)
Actually multi caliber (like what the ACR promised but never delivered on, from 22lr to 30-06 will include 7.62x54R)
Belt Fed Uppers as well
>>
>>22573445
not the jew you're replying to, but that's not a bad fuckin' deal. Especially considering who the money goes to.
>>
>>22573461
Something to weld the rails on.
>2 ton
I've been hearing 12 ton.
>>
>>22573477
Or murder cube plushies I'm not sure how something like that would work though
>>
File: mahnigga.png (63KB, 499x400px) Image search: [iqdb] [SauceNao] [Google]
mahnigga.png
63KB, 499x400px
>>22572995
>>
>>22573446
Because there's already a /k/ project working on the VSS, which is simmilar but not the same....ok..you win that one.

>>22573493
That sounds pretty awesome, but also sounds like a nightmare to produce in any decent numbers without a lot of money behind it.
>>
What tools would one need to complete an 80% lower from NE? I'm guessing you need some kind of milling tool to hollow out the cavity for the trigger/fcg, right?
>>
>>22573308
Yeah those are fucking awesome, I already have an alice and I bought 3, gave one to my cousin and then got two as loaners.

Washington FUCK YEAH!
>>
>>22573390
I ordered the last ILBE they had and I'm in the same situation. Tried to order something from every shipment.
>>
>>22573514
I won't be starting with that right away, it's going to be a modified AR lower (that takes an ACR stock) and traditional hammer fired as well.

It'll take a few years I think it's worth it to put it out there.
>>
File: 1400110173531.jpg (229KB, 842x1024px) Image search: [iqdb] [SauceNao] [Google]
1400110173531.jpg
229KB, 842x1024px
>>22573514

VSS project you say? I'm gonna need some extra thick sauce on that!
>>
File: Antisemite.jpg (68KB, 589x720px) Image search: [iqdb] [SauceNao] [Google]
Antisemite.jpg
68KB, 589x720px
/k/omrade, how much for shipping to Australia?
>>
>>22573559
http://vssvintorez.tumblr.com/
>>
>>22573514
Isn't the VSS project dead though?
>>
>>22573574
>http://vssvintorez.tumblr.com/
Nevermind.
>>
>>22572692
What company are you sourcing the lowers through? Palmetto State Tactical?
>>
>>22573534
Sounds like fun.

>>22573559

http://vssvintorez.tumblr.com/

Don't fret they're from /k/. Also some shakeups happened recently, so stuff is on a low burn right now till some background shit gets sorted our IIRC.

>>22573574
Hard to tell. I'm not sure if it was or wasn't shitposting, but there was something about the machinist may have gotten injured or something.
>>
File: 1388693343679.jpg (145KB, 500x234px) Image search: [iqdb] [SauceNao] [Google]
1388693343679.jpg
145KB, 500x234px
Hey NE, I'm a designer and have some ideas and designs I've produced for patches that I think would be popular. One in particular that's a /k/ take on one of those 'unknown' classified ops patches. I have a full time job so I don't really have time to deal with getting them made and then selling and shipping them, but I think they would sell. Would you be interested in taking a look/ a mutually beneficial collaboration?
>>
>>22573507

More like Murder Cube miniatures/models.

I'd definitely suscribe to that.
>>
File: 1407274773079.jpg (277KB, 800x528px) Image search: [iqdb] [SauceNao] [Google]
1407274773079.jpg
277KB, 800x528px
>>22573185

Any chance of seeing a NE emblem on ak 74?

I remove every kebab in a 20 mile radius for something with so much glory!
>>
>>22573638
There was some guy who made a 3d printed mini mudercube.
>>
>>22573629
>black ops patches
yeah would buy
>>
File: 20140828_000729.jpg (1MB, 3264x1836px) Image search: [iqdb] [SauceNao] [Google]
20140828_000729.jpg
1MB, 3264x1836px
Loving my portuguese camo shirt! Will definitely order an 80% AR receiver
>>
>>22573654
Seconding this question.
>>
>>22572976
>>22572989
Well if the lowers go according to plan, we can skip the shirts entirely and fund the whole run of bdus (and maybe even shorts, hats and tees too).

>>22572983
We do our best with what we have. Most of the time its only warehouse Ivan or myself packing, and we're working for free. I will say this though, we haven't had month long delays since the incident with our UPS account over six months ago.

>>22572995
If the lowers do well, I'll definitely consider it.

>>22573006
Been looking for a solid deal on flare guns for a while. Might have to import them myself.

>>22573007
Ditching the current website is quite literally #1 on the list right now. The cart glitch has been "escalated to the development team" for over a month... Very excited to jump ship.

I'd love some pictures of the build as it comes along. Shoot me some emails.

>>22573013
>>22573043
At this rate I might have to make them not limited edition XD

>>22573044
One of my biggest concerns is being able to scale up that level of involvement in the supply, packing, and customer service. Hopefully when its time, we'll find people as ridiculously committed as we are.

>>22573099
That'd be a great idea once we get a solid retail footing in MN.

>>22573110
>>22573045
please see >>22573113

The cart is safe. Is a vanilla implementation put out by magento, not some home-brew thing. If it wasn't safe tens of thousands of stores would be at risk.

>>22573133
Please do >>22573185

>>22573211
I'm considering getting them anodized, but that is ruined the minute you drill them out. Not sure its worth it...

>>22573270
No legal trouble with the camo itself. That's a game of 4chan telephone gone bad. The company had some problems with a lawyer doing work for us, which held up all the bigger projects.
>>
>>22573697
I live in Minneapolis and would volunteer to pack with you, if you're interested
>>
>>22573508
There you go, perfect. Now make it happen NE and I'll give jew my money.

I'll combine it with a /k/ube lower.
>>
>>22573528
Drill press fagotron. And some minor amount of mechanical ability.
>>
>>22573654
>Carefully placed text
>Includes shadow on text
>Two different fonts
>Now it is perfect
>Save as jpeg
>Post it on /k/

>STRENGHT
>STRENGHT
>STRENGHT
>STRENGHT
>STRENGHT
>>
>>22573734
It's doable with a press, but it's tough. You need a 3 axis vice
>>
>>22573293
Its funny how accurately you portrayed my worst fear. I'm so worried that some normal from google is going to order from us... I'm pretty sure they already have. I just hope and pray they don't get the packages with the dick jokes.

>>22573294
Guess the consensus is Rhodie and Russian gear. I'm OK with that.

>>22573308
Glad you like yours... Should have a pretty cool infographic on modding them posted on the blog soon. Anon contacted me with his really cool ruck and a bunch of pictures.

>>22573352
The orders on the 20th took so long simply because there were so many orders on the 17th and 18th. It was something like a 45:1 ratio.
>>
>>22573570

This. Can you ship to Australia? Would love to support you by buying shit.
>>
>>22573734
>>22573749
You can mill out the cavity for the fcg with a drill press?
>>
File: P1240678.jpg (2MB, 4121x2633px) Image search: [iqdb] [SauceNao] [Google]
P1240678.jpg
2MB, 4121x2633px
>>22573749
I did one with no 3 axis vise, just a few clamps. An x-y table or cross vise would make it faster maybe, but it was no problem doing it without.
>>
>>22573185
I really need to buy something from you. You've not had anything I want yet or you've sold out. That pork looks mighty good. Would go great with some Vodka and stale bread.

I have zero knowledge on AR's but I've wanted to get into one by building it. This will be a good time for me.

One thing I'd like to see if you can start carrying them are SKS and Mosin strippers but the decent military ones and not the NCstar ones. Those are kinda hard to find and your selling price would be above ebay's but I would pay extra knowing they came from you and were ones that actually worked.

Also Vodka, sell vodka. I can't find a bottle of legit Russian vodka in my city.
>>
>>22573792
Yes. Use a milling bit and go slowly. It took me several hours but it wasn't DIFFICULT, just tedious.
>>
>>22572845
THIS
if you make an 80% warfairy charon lower, i will buy one, if not two
>>
>>22573457
ti have? definitely
it's a block roughly shaped like a gun

to make it into a receiver? probably legal
>>
>>22573697
>I'm considering getting them anodized, but that is ruined the minute you drill them out. Not sure its worth it...

I wouldn't bother, raw is good. I know I'm already planning on getting my limited edition NE lower cerakoted in Shimmer Gold.
>>
>>22573792
Also, knowing how to use a pair of calipers and a drill press capable of being set for accurate depth stops is fairly important.
>>
File: PA100120.jpg (278KB, 1280x960px) Image search: [iqdb] [SauceNao] [Google]
PA100120.jpg
278KB, 1280x960px
>>22573570
>>22573777
Ausfag here who's bought stuff a couple of times.
Postage is quite a bit.
However, it becomes cost effective to get your mates together and get a bunch of stuff.
Lots
>>
>>22573836
alright cool. i was worried. cant have any salt rifles here in chicago/cook i heard. was worried it extended to lowers as well. even if i dont make it into anything i just want to have one of these
>>
>>22573777
>>22573570
>>22573859


While were on the topic, can anyone pro/con/neut?

http://www.kommandostore.com/by-country/new-czech-m10m-gas-masks.html

Do the filters go on the front or on the sides?
Whats the straw like?
>>
>>22573859

Thanks man.
>>
>>22573816
>>22573852
My neighbor has a pretty legit full-sized drill press, so I suppose if I paid him for some time on it, he'd be okay with letting me use it.

>>22573796
That looks like one fucking purty job
>>
I don know bout you niggas, but this anon wants some Got DANG RODIE BOOTY SHORTS! FLOPPYS MUST BE SLOTTED!
>>
>>22573864
You can always see about the legality of making an AR pistol in your area
>>
>What do you want to see from us
WOODLAND DPM AND MORE FLECKTARN
>>
>>22573897
its probably double illegal in this place
>>
>>22573901
>woodland dpm
i second this
>>
>>22573369
Yeah, I'm a little slow today...

>>22573357
I'm looking at getting some high tier 3M masks soon. Maybe after the lowers.

>>22573371
Never hurts to double check... Plus its fun to cold call 4channers.

>>22573374
:) Very glad to hear it

>>22573390
I do hope we are able to get those main packs back in. I don't know how we managed to get so lucky on that first lot of them. Very glad to hear yours has served you well.

>>22573400
>>22573437
We don't currently have an FFL, but by the time you finish those designs we will. Its definitely on the timeline.

>>22573457
80% lowers AFAIK are legal in every state. Machining them into guns is a different matter though. I'd check with your local authorities.

>>22573477
I think we have some things on the horizon that'd fit the bill. I must admit we have been distracted from that sort of thing recently though... Milsurp can be tempting.
>>
>>22573883
>FLOPPYS MUST BE SLOTTED
Are you the anon who keeps posting that phrase whenever you talk about Far Cry 2? Because of your posting I started a new game on hardcore mode so I can remove skinny with .45 and G3 (until I get dat dere FAL)

t-thanks

>>22573904
But what if it wasn't?

>AR pistol made from NE lower
>with one of those wonky rubber arm braces
>kept next to the bed incase of watermelon-american B&E
>>
>>22573916
Rodiesian shorts when?
>>
File: go_try.jpg (9KB, 224x225px) Image search: [iqdb] [SauceNao] [Google]
go_try.jpg
9KB, 224x225px
>What do you want to see from us and what should Nugget Enterprises be?

I want you anti-semitic fucks to fail miserably. I want this "business" to bankrupt you both financially and emotionally. I want it to cause you to become homeless and enraged and demoralized. You stand for everything which I despise, a "business" based on

>MUH BOARD CULTURE

is straight lulz, you will fail, it's just a matter of time, and just know, there will be some of us in the corner laughing, because he who laughs last, laughs hardest.
>>
>>22573461
>>22573502
Its 12 Harbor freight one works
>>
>>22573916
>80% AR lowers on the way
>80% AK receivers
>rhodie camo on the way
>FFL license licensed to NE on the way

take all my money
take it
>>
>>22573916
Can i work for The Ivans when you get an FFL?
>>
>>22572692
While personally I would love one, I lack the competence and confidence. to actually do anything with an 80% besides stare at it's un-milled beauty.
>Or the money to complete the rest of the rifle.

So unless you also plan on shipping out surplus asian sweat shop children to mill them for you, I can't do anything with an 80%.
>>
>>22573916

see
>>22572923
>>22573174
>>
>>22573697
>I'm considering getting them anodized, but that is ruined the minute you drill them out. Not sure its worth it...


Then it's probably cost effective to ship them uncoated and let the end user make the final decision on the coat.


>telephone gone bad.

I got fired thanks to a game of telephone gone bad (went from me examining k ration heater bars and holding onto them for a while for a kid at a camp I worked at to "this counselor has C-4 and is going to blow up the camp" in the span of 3 hours or so.)


>>22573814
Pretty sure you can make the ncstar ones about as good as military ones by throwing them in your campfire and then quenching them in motor oil. They'll ping like a decent en-bloc clip if you do it right.

>>22573979
I've seen an 80% done with a dremel (aluminum, not polymer) before, it looked shitty as fuck but it still went bang every time the trigger got pulled.
>>
File: not even a nibble.jpg (16KB, 480x360px) Image search: [iqdb] [SauceNao] [Google]
not even a nibble.jpg
16KB, 480x360px
>>22573942
>>
>>22574008
There are tricks. I've done a lot to make them better but they still aren't as good as originals. I use SKS strippers exclusively and I have 40 original Russian, 20 Yugo and 100 Chinese. The Chinese just aren't as good.
>>
File: kosher bait.jpg (33KB, 360x361px) Image search: [iqdb] [SauceNao] [Google]
kosher bait.jpg
33KB, 360x361px
>>22573942
>>
>>22573951
So...
>12 ton HF press
>HF spot welder
>shittyshit drill press
>???
>AK

That about right?
>>
>>22572968
Does the sleeping bag come with the dead man inside?
>>
>>22573979
what is to stick on the shelf? It's like a commemorative shirt or hat. But it's a lower. And someday, you might be able to complete it
>>
>>22572692
>What do you want to see from us
Mother fucking flecktarn onesies so I can operate in my sleep.

>and what should Nugget Enterprises be?
Exactly what you are now, only with you two asshats actually making a livable wage.
>>
>>22574034
/pol/ pls go
>>
>>22574008
That sadly doesn't solve the money side of it all.
>>
>>22572692
Get together with Plush Armoury if possible.
Also, Rhodie and Ruskie stuff if possible.
>>
>>22572692

Love your work, bro. Will be picking up some more gear when I get home.
>>
>>22574048
this.

I don't have any tools (not even a fucking dremel) and I'm sure I wouldn't have the cash to even complete the AR once I'd finish the lower from 80%, but I wanna get one while I can, knowing how fast shit sells on NE

ESPECIALLY if it's an 80% lower.
>>
>>22573488
Used to be that way... not anymore. ATF made an arbitrary decision on the matter a few years back.

>>22573493
Unfortunately that'd be way too big for us.

I could maybe do
>simple
>decently priced

but modular and multi-caliber adds a whole bunch of potential costs.

>>22573528
AK or AR? If AR then you'll need a drill press and some machining knowledge, or a drill press and a jig.

If AK, you'll need a press, a riveting tool (can be jerry rigged), and something to weld the rails with. There's more needed depending on how advanced you want to get.

>>22573570
We ship to Australia. Be prepared for shipping though, its very expensive. Expect to pay as much or more to ship the goods as it costs to buy them. As other posters have said, you're best off if you gather some buddies and buy a lot.

>>22573597
Not sure if I'm allowed to tell.

>>22573629
Always open to suggestions. Email me! [email protected]
I have a bit of a backlog this week, but I'll get to you.

>>22573654
I'll consider it. We'll have to sell out on the other AK lowers first though.

>>22573665
Glad it fits you! I'm very sad we ran out of the large sizes so quickly.

>>22573722
Email me, I'll definitely consider it. WI will need some help over the Fall and Winter.
>>
>>22572692

Thank you for everything you've done.
>>
>>22574038

>dead man

It's a snork, get out of here stalker
>>
Custom made novelty shit like this...can always do the voting bit like you have been to see what people want exactly so you can not get fucked.

>I want a 7.62x39 spam can plush
>I also want a flecktarn teddybear
>>
>>22574089
When I say simple, I mean less parts used.

and Decently Priced meaning just under 2 grand
>>
>>22574067
>Posting a picture
>OY VEY must be /pol/ pls go
Is there a bot that's on here that posts that same exact phrase when anything that even implies something Jewish is posted?
>>
>>22574097
>>22572692


Forgot to mention I was hoping for another batch of summer cup /k/ scarves since I missed the chance to get mine
>>
>still no Ivan design
Darn...
>>
>>22574089
>AK or AR? If AR then you'll need a drill press and some machining knowledge, or a drill press and a jig.
Would the jig make up for lack of machining knowledge? Like I posted above, I don't have a drill press but my neighbor does. I'd most likely pay him for an afternoon with his once I'd get around to finishing it to 100%. I know nobody else can get into the manufacturing process or else it needs a serial#, but I'm sure I could get him to give me some pointers and look over my shoulder.
>>
>>22573308
>>22573530
Since they're rubberized nylon do they smell horrendous?
>>
>>22574089
Buy my ass a plane ticket and I'll come be a warehouse slave for winter break.
>>
>>22573916
I love you guys. I would love some NE apparel hit the shelves. A /k/ube or NE baseball cap/nalgene/t-shirt would be scooped up by the dozens by me :3
>>
>>22574038
Pretty sure that's a Snork... And no. That is not a standard addition to most orders.

>>22574027
I don't know why I even brought it up, I forgot you have a shitload of stripper clips.

>>22574072
Knock over a bank with a flaming banana then.

>>22574123
seconding this because of my snafu with the mosin where I wanted the sks one... I also think my scarf is sentient since it seems to move around my apartment on its own.
>>
File: image.jpg (211KB, 774x809px) Image search: [iqdb] [SauceNao] [Google]
image.jpg
211KB, 774x809px
>>22573629
I would murder for some of these
>>
>>22573315
please take my advice man have the people who want rhodie camo fill out a form before hand with their name and address and such and pay for it first that way you wont end up with a whole lot of extra uniform parts in obscure sizes that wont sell.

of course get extra for the assholes that wont use the form but if done right it would certainly help me and probably a lot of other anons.
>>
>>22574027
what about the Czech ones?
>>
>>22572692
Rhodesian camo Ivan, my kingdom for some Rhodesian camo.
>>
Stop stealing my fucking paychecks Ivan
>>
>>22572692
Oh thank God Ivan you scared the living shit out of me. I thought that wall of text was a letter saying you were shutting it down before I read it.
>>
>>22573843
Oh good lord hahahaha. I want pictures when that happens.

>>22573872
Filters go on the side, straw is a plastic tube that you can grab with your tongue with a little facial gymnastics.

>>22573942
>anti-Semitic fucks
I don't remember saying anything about the jews... ever. That's /pol/'s domain.

>>22573967
Well that depends if we're hiring, and if you're right for the job ;)

>>22573953
The next couple of years should be pretty cool.

>>22574008
Yeah, I'm definitely leaning towards lowers in the white.

>>22574049
I would buy that... maybe that'd help with the wages too

>>22574097
You're very welcome.
>>
>>22572692
what happened to croatian m65s?
>>
>>22573942
Shit nigger they'll restock what you want eventually Christ
>>
>>22574149
I would buy a Kube or NE logo nalgene for sure.
>>
How about nice simple T-shirts with the NE logo on them?
>>
Are you still taking donations? I haven't seen much that I really wanna buy and I'd rather donate in the meantime
>>
>>22574036
Forgot the Harbor Freight Bolt cutters, a few pennys, a HF hand sledge.
>>
File: DSC01173.jpg (251KB, 690x1228px) Image search: [iqdb] [SauceNao] [Google]
DSC01173.jpg
251KB, 690x1228px
I would buy the shit out of an NE logo patch, so I can operate with Ivan's protection. P.S. I love my fucking Polish puma pack.
>>
>>22573043
This nigga...I like the way he thinks.
>>22572692
Gonna get cold soon OP, time to bring back those scarves I never got a chance to pick up.
>>
>>22574114
The only problem here is volume. I can't tackle most of those ideas unless I have a minimum order.

>>22574123
More scarves soon. I promise.

>>22574130
Sadly not popular enough to warrant inclusion

>>22574142
No, they're more canvas than rubber. No smell beyond your standard "milsurp" musk.

>>22574144
Tempting ;)

>>22574157
Are they unavailable elsewhere online?

>>22574168
That's already been done actually. Rhodie tackled all that before we linked up.

>>22574195
You're not going to like Rhodie when it comes.

>>22574199
I realized that when I was about halfway through writing it. Glad we're still here.

>>22574212
We're still figuring out how the hell they sized those things.

>>22574248
We've removed the donate button, but it is still possible. Email me.

>>22574245
>>22574229
Definitely viable.


Going to hit the sack now. I'll check up on this tomorrow. Genuine thank you to everyone. Even the weird jew-obsessed poster.
>>
>>22574149
>>22574229
This but liberty bottle works
>libertybottles.com
>>
How about a "class roster" type T-shirt that you got every year with a list of all the names on the back and the school logo on the front. As far as names you could do everyone that spent over x amount up to this point on the store? And email them asking what name they would like.

and on the front just be the NE logo...

and make them a limited run of course.
>>
>>22574297
>tfw car might get repossesed
Doesn't matter got Rhodie, at least I'll be stylin while I walk 30 miles to work and back
>>
>>22574212
No sizing
>>
>>22574335
>Is my far in flecktarn or rhodie? don't give a fuck then
>>
File: 1400535713754.jpg (412KB, 1020x746px) Image search: [iqdb] [SauceNao] [Google]
1400535713754.jpg
412KB, 1020x746px
>>22572983
>mfw I'm from Wisconsin
>mfw my work is a UPS preferred customer (small town, we let them and Fedex use us as a dropoff point)
>mfw my last 3 deliveries got here 4 days after checkout
feels good man
>>
>>22574328
I've disliked those ever since I saw them. ..Well specifically any of them in red simply because they're too easily mixed up for white gas bottles.
>>
>>22574150
For awhile there whenever I'd buy a nugget or an SKS I'd buy ten extra strippers. Then I had a whole mess dumped on me with the VZ purchase.

I too missed the scarves. Did not even know they existed until it was far too late.

>>22574174
I don't have any but I hear they are good.
>>
>>22574372
Meh, not a problem for me, solid fuel all day.
>>
Someone force my bastard family to bury me in surplus.
>>
>>22574391
A stove is useful when you're camping in areas that have fire restrictions, though white gas is tricky for newbies (and experiences campers alike sometimes), but I agree. A wood fire is the best, usually.
>>
>>22574413
I meant hexamine tablets
>>
>>22574413
I burn tires in my campfires
>>
>>22574428
Literally had no idea what those were till just now and I've seen all kinds of shit for cooking thanks to scouts.


whelp I'm crashing out because work and whatnot in the morning.
>>
>>22574205
I'm that nerd who lives in New Brighton and I'm good at taking orders. Am I your man?
>>
>>22572692
Do you have any leads on Egyptian militaria circa 1970-1990?

I'm looking for a Helwan holster and any kind of load bearing equipment or camo uniforms. All I have right now is a mag pouch, a sling, and a bayonet.

I need shit to go with my new Helwan and the maadi akm I'm building.
>>
>>22574297
In regards to the patches:

Yes, completely unavailable. I've looked.
>>
So what's the general consensus on the anodization?
>>
rhodesian camo
>>
>>22574572
Leave the lowers white
>>
>>22573147
>All the cheeki-breeki inside joke shit would have to go away at best (from the outside looking in it looks like some kids came up with it)

I'm old and decrepit and trust me when I tel you this is wrong. Old guys still want to have a good giggle as well. Remember the only difference between a man and a boy his the price of his toys.
>>
>>22574297
ok thank god i was worried about all that how will you want the forms to be put out should i just send you an email first to get one ?
>>
File: yWEm2hU.jpg (204KB, 3418x1899px) Image search: [iqdb] [SauceNao] [Google]
yWEm2hU.jpg
204KB, 3418x1899px
anyone else want to see pic related on a lower?
>>
>>22574580
If they go with leaving em as is, do you have a recommendation for refinishing them?
>>
>>22574769
Fecal matter.
>>
>>22574766
needs sks on one side
>>
>bought a lower yesterday
God damn it.
Oh well.
>>
>>22574833
>now can into double dakka
you know you want to
>>
>>22572692
I don't know whether it's an inside joke I don't know about, or do people do it just because it's cool but on design #4 the "flipped N" in NE and actually an "I" in cyrillic, that just bothers me for some reason. Just thought you may want to know.
>>
>>22572692
BLYAT, IVAN. I love you, you are the man. Such customer service. Such quality merchandise. When I am no longer a poorfag I intend to buy AR and AK lowers. For now, I shall feast on stroganoff and dream of the future.

For engravings, #4 is great, #1 is great but I wouldn't want to sit in the hot seat after a prosecutor figures out what it means. Never been a fan of #3 image, #2 is a bit too nerdy for me, would not want associates to figure out the nature of my 4chan activities unless they are "in the know"
>>
I love you.
>>
>>22575076
Also, I'd get #4 on my lower.
>>
>>22572692
More Flecktarn.
>I want a damn warm weather hat and gloves in my size
>>
File: 1409210920436.jpg (463KB, 1392x1392px) Image search: [iqdb] [SauceNao] [Google]
1409210920436.jpg
463KB, 1392x1392px
>>22575162
I knew that feel anon.
One day, you will get glorious gloves and hat
>>
>>22572692
I vote # 3
>>
>>22575162
really though, the hat's not all it's cracked up to be
>>
>>22575433
but anon, so warm
i live in MN and can tell you, its breddy gud
>>
GET
MORE
KRAUTSHIT
FUCK
>>
>>22572692
sup ivan, imma order me a polish pack on tuesday
>>
honestly. I think a good idea is to sell B.O.B. type stuff for us to buy. sacks, water tablets, rope, kukris etc. also those scarves when? cause winters on the way and I wanna go with my scarf of /k/
>>
File: 1405471227361.png (1MB, 1920x1080px) Image search: [iqdb] [SauceNao] [Google]
1405471227361.png
1MB, 1920x1080px
>>22572692

Special plug for NE and 80% lowers in next week's news bulletin. You are doing the /k/ube's work komrade.

Also, I love my patches, and your love letter was nice.
>>
>>22572998
Holy shit. Im not the only NM /k/omrade??
>>
File: 1406531080374.jpg (180KB, 900x604px) Image search: [iqdb] [SauceNao] [Google]
1406531080374.jpg
180KB, 900x604px
nth for Russian milsurp (especially old stuff that isn't digital flora)
I need to ???? ????
>>
>>22574297
> more scarves soon
YIISSSSS

also flecktarn scarves
>>
>>22575661
medkits
>>
File: NE.jpg (120KB, 1139x642px) Image search: [iqdb] [SauceNao] [Google]
NE.jpg
120KB, 1139x642px
>>22572692
you've got my support, what ever its worth. I've always been a milsurp kinda guy, and if i can buy it off of someone who's in on the joke that makes it that much better.

i'd really like to see some A/k/ slings or bayonets things a long those lines, but even if it doesn't happen im sure ill always find something on NE.

>pic related we love the /k/ommando store
>>
>>22572692
We need NE animal dildos. Now.
>>
>>22572692
#1 and #4 look the most appealing to me
>>
>>22572692
Ivan-Chan, pls get more OD polish plash palatkas.
>>
>>22572692

ITT: Things I want but will unlikely be at NE

>80% pistol frames; 1911, modified ones, P226/8/9s, maybe go from simply stocking to designing others

>more ruskie shit, especially gorka

>scaled down replica of the holy /k/ube for mobile prayers
>>
>>22575748
Dis nigga knows what's up.
>>
>>22573916
80% lowers ship into Canada, when?
>>
>>22573942
>>
>>22573654
thats what i would spend all types of money on right there that based 74
>>
>>22574205
Flecktarn onesieslike the Russian birch tree speznaz coveralls.
>>
File: House bandits.png (317KB, 500x728px) Image search: [iqdb] [SauceNao] [Google]
House bandits.png
317KB, 500x728px
tfw want to buy one of those stalker patches from NE's site
tfw can't choose between mercenaries or [spoiler] renegades [/spoiler]
>>
>>22573942

OP you will fail eventually but because nothing lasts forever, not because of this butt-fucked anger queen over here.
>>
>>22575864
I hope you have a sewing pattern for that...
>>
Hey Ivan, just wondering what your "wall" looks like at the moment?
Also thanks for cooperating with that return, can't wait to finally get that puma parka!
Shits gonna be so cash this winter
>>
>>22573942
Internet Quality Control spotted.
>>
Number one and two.
>>
Damn bro those are awesome patches I'm gonna order a few.

Nice company, good luck to you.
>>
Just what we needed.

More AR-15 manbabbies.
>>
>>22575920

Damn all the good colors are out of stock, any word on when you'll be restocking the black plague doctor ones?
>>
>>22575922
what if i own an AK and want to have an AR?
does that make me a manbabby?
>>
>>22572832
THAT IS HOW THE FUCKING NSA GIVES YOU VIRUSES

unencrypted elements in encreypted pages, it was on theintercept leaked documents
>>
>>22573477
>You should channel into /k/'s spirit and soul and figure out what we would ejaculate thinking about, but it's something no formal business wanted to make. I don't know.

An SKS daki cover.
Assembled on one side and disassembled on the other.
>>
>>22575922
i love the AR hate. maybe not so much hate but I'm gonna say it anyways. say what you want but if countries like the US and Canada can use them for so long its gotta mean something right? I don't even own an AR, truthfully im more of an A/k/ guy myself, but i used them in the MUHreen corps and i can't tell you of one time that it fucked up on me. i'm sure that this isn't what you we're asking for but im drunk and felt like saying it
>>
>>22573744
You misunderstand, serbia stronk!
>>
>>22573697
I'd like to see you guys get a hold of some AK optics like POSP's or PKA's
>>
>>22572788
Don't forget Buki Shoujo
>>
>>22572692
>RHODIE CAMO UNIFORMS PLS
>MOAR FLAK VESTS
>MOAR SURPLUS.
>>
>>22572692
are you able to send your articles overseas?
>>
>>22572692
well already went for the 80% ak lower might as well do an AR too
>>
>>22574297
Hey, first off I wanna say you guys are fucking killing it and keep on keepin' on. Secondly, I was gonna ask if you guys might consider producing two types of the Murderkube patch? Your current one is the "Ave/Saluto Cubum Necis". I was wondering if you guys could do a Nex Alea version too, for the few of us who are stuck to this version. Thanks and may you stay true to the Twofold Path.
>>
>>22572692

>What do you want to see from us and what should Nugget Enterprises be?

would you guys ever think about expanding the colors for some of your patches? I'm thinking of getting a beez plate carrier in grey and alternative colors like ranger/foliage green are becoming more popular.
>>
>>22572692
OI WHATS THE SHIPPING TO AUSTRALIA MATE
>>
>>22572692
More German fleck! I missed the flak jacket :/
>>
Been trying to find out Australias gun laws and can't find out much on whether it is legal (for now) to be able to import a 80% receiver. i can't even find anything it on even ozzy fudd shootin forums.
Just not well known enough?
>>
>>22576715
how would you get the rest of the parts to complete the gun?
>>
File: 1408880885307.jpg (139KB, 589x777px) Image search: [iqdb] [SauceNao] [Google]
1408880885307.jpg
139KB, 589x777px
>>22576719
I've seen some parts for sai
Semi autos are still available for sale in Australia but you need a special license for them, but i have seen parts for sale both legal and illegally. alot of dismantled weapon parts floating about still after the gun control laws came in.
>>
>>22576715

In Australia the receiver is considered the gun as well, you should be able to buy a barrel/trigger without too much trouble or a license..

As for 80% lowers it's hard to tell considering less than 0.0001% of people have access to full retard, and primary producers being the main market for semi autos... import it as a paper weight and you might be ok.
>>
>>22576715
I can't see it being a drama, you can legally imports triggers, bolts, barrels etc I doubt customs would even know wtf they were looking at, if it was labelled automotive part chances are they wouldn't get more than a glance.
>>
>>22575679
You are not alone anon
>>
>>22576761

Further reading shows you do want a license if you're buying barrels.

"All spare barrels require registration.

You can possess spare barrels however, possession of spare barrels without the authority of a licence or permit for an associated firearm, or for those barrels, is prohibited."

This is in ACT... the laws differ so much from state to state.
>>
File: 1305177553711.jpg (11KB, 157x186px) Image search: [iqdb] [SauceNao] [Google]
1305177553711.jpg
11KB, 157x186px
>>22572692

>4chan started a business, and it worked

That never ceases to amaze me. Somehow, 4chan consistently gets shit done.

Keep on keeping on guys, and never stop wrapping mil addresses in furry/mlp stickers. That shit is hilarious.
>>
>>22576803
Except /v/ making a game
>>
File: GEM_Xposed_Promo.jpg (40KB, 585x776px) Image search: [iqdb] [SauceNao] [Google]
GEM_Xposed_Promo.jpg
40KB, 585x776px
>>22576794
>>22576761
>>22576771
Thanks for the replies, really appreciated, yeah I was hoping customs would be retarded enough to see it simply as some overly complicated machinery part (hopefully as you say a paperweight)

Maybe i'd be the first to get one in Oz, i plan on a gunsmithing apprenticeship somewhere down the line.
>>
>>22576819
/v/ made Katawa Shoujo.
>>
>>22576831

Personally I think you'd be better off grabbing a chunk of aluminum and doing it yourself rather than risking a 250k fine.

There's a lot of good info out there on building open bolt SMGs.
>>
>>22576715
no, you can't import any part of a firearm into australia without the right documents and shit, and even then it may be just from new zealand
>>
>>22572692
>What do you want to see from us and what should Nugget Enterprises be?

Just dont the fuck ever change! Also if nugget enterprises goes through the rooftop and has a booth at the 2017 shot show, please stay /k/
>>
>>22572692
>What do you want to see from us and what should Nugget Enterprises be?

How about you guys SOMEHOW find a way to start selling decent nuggets at $80-90 a piece?

[spoiler]I know its a pipe dream[/spoiler]
>>
>>22576697
read the fucking thread
>>
>>22572692

WHERE THE FUCK ARE MY METAL GEAR PATCHES IVAN?????
>>
>>22572913
Uncensored communication frequently gives rise to creation.
>>
>>22576839
>Always wondered, how did the Japs take that game? If they even noticed it.
>>
>>22572692
so how long does shipping to Australia take?
>>
>>22572692
I know it has been said before but in the spirit of getting a census on the matter I will say it again: Ruskie gear would be awesome. In addition, the expansion into more tacticool military surplus would be great and it doesnt even have to be Ruskie stuff: Czech, Austrian, German, and just general Slav. A breakout into helmets would be great; I'm looking for the ones that kinda look like Spetznaz helmets from the Metro games...I really just wanna look like i stepped out of the Metro games...
>>
>>22573796
That's one of the nicest I've seen. Most people, even using 3-axis vises and the like make it look like some retard with a dremmel tool did the job with their eyes closed.
>>
>>22576989
Mixed to positive reception IIRC. They hated the title because it literally translates as "Crippled Girls" which in Japanese comes off as even more derogatory. Japs generally did like the characters, the story and the whole shebang was pretty impressive coming from filthy gaijin.
>>
File: 1409230356570.jpg (834KB, 2048x1152px) Image search: [iqdb] [SauceNao] [Google]
1409230356570.jpg
834KB, 2048x1152px
Today's going to be a good day!
My Kube Reciever is coming in the mail, and It's Thursday so I don't have any labs.
I swear to oden ivan, if you have kube AR recievers I'm buying one. Might take me a while to get the funding. Might have to give a few berjousky behind the campus. But I will buy a lower from you.

It would be ridiculous to have a cube ak and not have a cube ar
>>
>>22574038
Only if you pay extra for hand-picked.
>>
File: idshabidding.jpg (124KB, 600x446px) Image search: [iqdb] [SauceNao] [Google]
idshabidding.jpg
124KB, 600x446px
>>22576882
This would be legit as hell. unscalped .22 for non-bulk orders would be nice too. more long term goals after the jump:

Can't go wrong with more cool patches though. an "It's happening" /ids habidding one mite b cool.

Lastly, where possible, invest your success back into /k/. Hopefully some anons know of more projects than I do, but the 2 other /k/ related endevors I know of are
>http://vssvintorez.tumblr.com/ (US made VSS)
>http://tetsuzoukamadani.tumblr.com/ (Non-plastic, machining free garage gun.)
>>
>>22576839
That was /a/.
>>
>>22577037
I was expecting them to find a terrible reason to dismiss it entirely, like the title.
>Because we all know elevens have shit taste.
>>
File: 1409063001121.jpg (59KB, 247x288px) Image search: [iqdb] [SauceNao] [Google]
1409063001121.jpg
59KB, 247x288px
>Magical Place Patch OD --> Out of stock

RESTOCK WHEN???
>>
god bless
>>
>>22572692
All I want for you guys is to be successful and to have a profitable business.

That and possibly Polish Space Marine patches or New California Republic propaganda posters.
>>
File: Teddy.jpg (108KB, 537x745px) Image search: [iqdb] [SauceNao] [Google]
Teddy.jpg
108KB, 537x745px
>>22574114
>flecktarn teddybear
>>
File: K-Shield.png (49KB, 770x446px) Image search: [iqdb] [SauceNao] [Google]
K-Shield.png
49KB, 770x446px
I'm back on for the morning.
>>
>>22578332
So are the engravings for the firing selector going to be the standard safe-semi-auto, or something else?
>>
>>22578332
Dont have any suggestions or anything. I just want to say thanks for all that you guys do. Haven't had a single problem with anything I've ordered.
>>
>>22577203
'twas a joint effort
there was also help from /g/
>>
>>22578332
Try #4. I understand the main audience here is for /k/, but if you ever hope to expanding your audience (and I'm not saying you are, run your business how you like) something tells me most people would rather have the logo of the company than a badge for an Internet forum.
>>
>>22578390
Yes they're going to be standard. The full specs are available here, on the second page:

>https://docs.google.com/forms/d/1lRQLx0HIJbtjxPvKtXariooIU1nYkIQcXklnLlry5Ds/
>>
File: Pipe_bombs[1].jpg (797KB, 1520x2688px) Image search: [iqdb] [SauceNao] [Google]
Pipe_bombs[1].jpg
797KB, 1520x2688px
>>22578419

I am hoping that you continue your research into pipe bombs, prototype is of great success
>>
>>22578332
just got a delivery about 20 mins ago, i guess i got to help your over worked sweatshop china man he reached out to me on box
>>
>>22576650
There was a schism about the wording of that? Or did I miss something?


>>22578011
>New California Republic propaganda posters.

That'd be troublesome because of licensing from whoever has the rights to that. Hard to tell sometimes, Bethesda may have the game rights but stuff like the posters might be licensed out to some drill company in Thailand.
>>
go snatched up that acme gun Co guy that posts here
>>
>>22572692
Anyway you can get some big n tall for the BDU's, specifically flecktarn? I'm 6'8' with a 34 waist, 36 inseam, so they're kinda hard to find. Same with the jacket. Not sure if just ordering a 2XL would work. I want to throw money at you, so let me know.
>>
>>22579021
first Ave Nex Alea, which is kinda like hail to the dead dice
then Ave Cubum Necis, which is.... better?
Ave Cubus Caedum = hail to the cube of masssacre and slaughter
>>
File: 1400363032757.jpg (263KB, 2816x2112px) Image search: [iqdb] [SauceNao] [Google]
1400363032757.jpg
263KB, 2816x2112px
>>22579021
>>22580132
"Ave Nex Alea" is really the only correct way. Let me explain my logic.
"Ave" was the term used to hail the Imperator of Rome; it is a salutation for someone far above the speaker.
"Nex" means murder, slaughter, death with a violent connotation. "Alea" has a number of meanings: one is "cube" but the others are related to dice and chance, which fits nicely with our salute because we're praising the /k/ube as a god, essentially hoping for a divine being to shift the odds in our favor. "Nex Alea" together can be translated to "Murder/k/ube," which was the original name of the /k/ube.

Grammatically, "Ave Nex Alea" is not perfect (or so I've heard, I'm no expert in Latin grammar). Consequently, there have been proposals and efforts to change the salute to some of those other things. I oppose this for two reasons. Firstly, the original, with the slaughter and chance, is so much more fitting. Secondly, the original has already been adopted and is well-established. You don't change that. "Ave" is the proper salute. "Nex Alea" is a proper noun, not just a phrase; it is the chosen name for the thing it refers to. One does not arbitrarily change proper nouns. You don't name a child one thing and then, several years later, say "your name is grammatically incorrect so I'm going to start calling you something different." You just don't.

Ave Nex Alea
>>
File: Good idea.jpg (109KB, 474x750px) Image search: [iqdb] [SauceNao] [Google]
Good idea.jpg
109KB, 474x750px
>>22578332
What do you think about selling milsurp boots as a product?

Domestic or import, whatever's cheaper for you guys, they might sell well enough, especially if they're hella /fa/ as the rest of your stock.

BTW:
>Thank you for humoring me by reading my autistic as fuck emails.

>Glad you liked my shitty edit of the Dark Knight poster.

>Stay smart, stick with us. God bless you and good luck in everything.
>>
will you guys ever take pre-orders for the cool shit?

like scarves?
or any limited edition stuff?

Pre-order might also be a good way to know that you'll reach a minimum order size prior to committing to the purchase.

Just a thought.

Also, excited to see my LK35 ship, waiting for glorious milsurp and glorious note from Ivans
>>
>>22580247
>Grammatically, "Ave Nex Alea" is not perfect

Hail A Death Die (die as in dice)

it's even more mangled than that since there's no such thing as declension in English

>"Nex Alea" is a proper noun, not just a phrase; it is the chosen name for the thing it refers to. One does not arbitrarily change proper nouns.

in Latin you have to decline proper nouns, like any other noun

Ave Cubum Necis is better.

Ave - present second person imperative of avere, which in a salutation translates to "hail." you're telling other people to wish well being to the object of the verb avere

Cubum - accusative form of cubus, Latin for the shape cube. accusative means it is the object of the verb, so translated it would be "to the cube"

Necis - genitive form of nex, which means "of death"

Ave cubum necis, Hail to the cube of death
>>
>>22580552
those LK 35s are beautiful, and I'm really struggling not to order one since I'm not really in the market for a new pack

I have an old external frame pack from when I was a Boy Scout, but damn that LK 35 is just utilitarian as fuck and really inexpensive for what you get.
>>
File: -k- bunny.jpg (138KB, 550x504px) Image search: [iqdb] [SauceNao] [Google]
-k- bunny.jpg
138KB, 550x504px
bump to save from deletion
Thread posts: 331
Thread images: 53


[Boards: 3 / a / aco / adv / an / asp / b / bant / biz / c / can / cgl / ck / cm / co / cock / d / diy / e / fa / fap / fit / fitlit / g / gd / gif / h / hc / his / hm / hr / i / ic / int / jp / k / lgbt / lit / m / mlp / mlpol / mo / mtv / mu / n / news / o / out / outsoc / p / po / pol / qa / qst / r / r9k / s / s4s / sci / soc / sp / spa / t / tg / toy / trash / trv / tv / u / v / vg / vint / vip / vp / vr / w / wg / wsg / wsr / x / y] [Search | Top | Home]
Please support this website by donating Bitcoins to 16mKtbZiwW52BLkibtCr8jUg2KVUMTxVQ5
If a post contains copyrighted or illegal content, please click on that post's [Report] button and fill out a post removal request
All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.
This is a 4chan archive - all of the content originated from that site. This means that 4Archive shows an archive of their content. If you need information for a Poster - contact them.