First time overclocker here. Did I do everything right? 4Ghz, 200MHz x20.00 at 1,5V.
For some reason it's not showing the 1,5V in Hwinfo. Also I have no idea what Temperature 3 is. Prime95 is not throwing any errors.
CPU: AMD Phenom II X6 1090T
Mainboard: Gigabyte GA-870A-UD3 870 AM3 ATX
PSU: 550W Cougar CMX550 80+
Thanks in advance for any help
>>61675539
>CPU: AMD Phenom II X6 1090T
>>61673400
>>61675569
It's my old PC. I have a Skylake in my new one.
>>61675539
>Did I do everything right?
No. You are using a processor outside of it's operating window. Not only it this potentially very harmful for all equipment involved it's also utterly pointless in terms of performance gains.
Please stop this nonsense before hardware gets destroyed. In case of a mishap you can be held liable for damages to property and/or casualties as a result from a possible electrical fire.
If you need more processing power the only reasonably solution it to buy a CPU that matches the required specifications. Don't be reckless in saving a few bucks on the short term.
>>61675733
|>
|:3
Who's behind this post?
>>61676217
(You), apparently.
>>61675733
Why troll?
bump for real feedback
1.5v for 4ghz? Lel that's a house fire waiting to happen
>>61677260
What voltage do you recommend?
>>61677260
It's an old thuban. They need more voltage, you fucking retard.
>>61677271
I wouldn't go over 1.45 personally, but if the chip doesn't get too hot 1.5v should be alright. Back in the day I never went over 3.8Ghz on my 1090t because it seemed like there was kind of a voltage wall at around that speed for Thubans.
Get Ryzen, OP. Don't be a poorfag
>>61675733
Shut the fuck up.
>>61675539
did you disable 2 cores?
also, Thubans will take any voltage you give them so no need to be worried there.
I don't think that the temp is only 50C under full prime95 load.