My CAS latency is supposed to be 8-8-8-24 but it says its

So now I need to go back and change the frequency to 1600?

The model of my ram is "8-8-8-24-2N" what exactly does that "2N" represent?

https://www.gskill.com/en/product/f3-1600c8d-8gab

Anonymous 2017-07-16 11:29:09 Post No.61411502
[Report]

Anonymous 2017-07-16 11:29:09 Post No.61411502 [Report]

>>61411235

Your frequency is fine man. You have dual channel ram. So always remember to multiply the frequency it shows there by 2. (797*2=1594mhz).

Anonymous 2017-07-16 11:30:07 Post No.61411515
[Report]

Anonymous 2017-07-16 11:30:07 Post No.61411515 [Report]

>>61411235
make sure its all in the same order, some bois dont have the tras and all that shit in the same order as its listed in the 8-8-8-24 bullshit.
also check your ram voltage.
Shit says its supposed to be 1.5V. I personally run mine with a slight under voltage.

Femanon 2017-07-16 11:39:06 Post No.61411612
[Report] Image search: [Google]

Femanon 2017-07-16 11:39:06 Post No.61411612 [Report]

File: muhryzen.png (56KB, 806x402px) Image search: [Google]

56KB, 806x402px

Hey /g/oyim. I had a problem with my RAM too. It was OCd for a month to 3200Mhz but after that I was struggling to boot sometimes so I had to set the clocks back to default. I rmad it should I try to OC again?

Anonymous 2017-07-16 11:44:08 Post No.61411686
[Report]

Anonymous 2017-07-16 11:44:08 Post No.61411686 [Report]

>>61411612

Max ram frequency is mostly dependent on the motherboard. Find out what your motherboard can handle.

Or, just keep scaling back until you find a stable value.

Femanon 2017-07-16 11:45:56 Post No.61411710
[Report]

Femanon 2017-07-16 11:45:56 Post No.61411710 [Report]

>>61411686
Mobo handles 3200Mhz I got it for that specifically. And it was stable for a month no issues

Anonymous 2017-07-16 11:53:33 Post No.61411787
[Report] Image search: [Google]

Anonymous 2017-07-16 11:53:33 Post No.61411787 [Report]

File: ram now.jpg (34KB, 392x334px) Image search: [Google]

34KB, 392x334px

Does it look right now?

Anonymous 2017-07-17 01:50:56 Post No.61413143
[Report]

Anonymous 2017-07-17 01:50:56 Post No.61413143 [Report]

Good goy!!! Buy our overpriced underperforming RAM yes

Anonymous 2017-07-17 02:15:27 Post No.61413426
[Report]

Anonymous 2017-07-17 02:15:27 Post No.61413426 [Report]

>>61411612
Thats some timing issue, probably gotta loosen up some timing and maybe voltage too.

Femanon 2017-07-17 02:19:07 Post No.61413481
[Report]

Femanon 2017-07-17 02:19:07 Post No.61413481 [Report]

>>61413426
I just enabled XMP and it was working flawlessly for a month

Anonymous 2017-07-17 05:36:29 Post No.61415650
[Report]

Anonymous 2017-07-17 05:36:29 Post No.61415650 [Report]

>>61410910
I never thought a BIOS could become so bloated

I'm aware that Imgur.com will stop allowing adult images since 15th of May. I'm taking actions to backup as much data as possible. Read more on this topic here - https://archived.moe/talk/thread/1694/

I'm aware that Imgur.com will stop allowing adult images since 15th of May. I'm taking actions to backup as much data as possible.
Read more on this topic here - https://archived.moe/talk/thread/1694/