mpv general

File: yururu mpv scales lanczossharp - Copy.png (3MB, 1920x1080px) Image search: [Google]

3MB, 1920x1080px

OP here. Pic related. MPV with config above produces this.

File: yururu mpc jinc - Copy.png (3MB, 1920x1080px) Image search: [Google]

3MB, 1920x1080px

>>60910613
While madVR Jinc with no additional enhancements produces this.

File: yuruyurusauce - Copy.png (2MB, 1280x720px) Image search: [Google]

2MB, 1280x720px

Source image.

File: mpv-shot0002.jpg (346KB, 1920x1080px) Image search: [Google]

346KB, 1920x1080px

>>60910613
this is mpv with your config

>>60910813
I doubt it. Also next time upload png.

>>60911059
>somehow fucks up real bad
>n-no, you're lying! i didn't fuck up!
just lol

>>60911059
>retard, who can't even properly setup a config file
Also kys

>>60911077
Are you retarded? I literally posted my config. Fresh mpv "install". And again upload PNG because right now your image still looks like shit compared to madVR's Jinc.

>>60911086
If you have nothing to contribute then fuck off, autist.

>>60911090
I didn't post the image. Regardless, you're a dumbfuck who prolly put his config in the wrong place kek

>>60911115
>posts austic comparisons
>calls other people autists

>>60911059
add
geometry=560x368
to your config

open in mpv this image
https://github.com/haasn/mpvhq-upscalers/raw/master/rose/original.png

Ctrls+s and upload
and we will tell you what scaler you are using

File: 1496202130967.png (18KB, 999x484px) Image search: [Google]

18KB, 999x484px

>>60911059
And you compress yours.

>>60910813
but.. the mpv one is better ???

>>60911137
>I didn't post the image.
Why the fuck you replied to that post then, idiot?
>>60911137
>Regardless, you're a dumbfuck who prolly put his config in the wrong place kek
I used configure-opengl-hq.bat. It created mpv folder and config in it. I edited it. The config definitely works because wasapi has effect.
>>60911140
Again. Fuck off shitposter.
>>60911158
It fails to make a screenshot. It looks much worse than what haasn has in his comparison though.

>>60911252
>Why the fuck you replied to that post then, idiot?
To laugh at you. Dumbfuck had to use a script to set up mpv because his microscopic brain couldn't handle reading a couple lines of manpage.

>>60911263
Nice shitpost kiddo, grow up.

File: sennshills.png (127KB, 601x508px) Image search: [Google]

127KB, 601x508px

>>60911268
>Nice shitpost kiddo, grow up.

>>60911252
>It looks much worse than what haasn has in his comparison though.
People can actually be this dumb?

>>60911278
?

>>60911285
It means mpv upscales with bilinear and your config doesn't work.

>>60911321
Do you have any idea why this can be happening? Wasapi from the same config is working.

>>60911321
I doubt it. Also next time upload png.

>>60911353
>being this butthurt
If you cant help then GTFO. This is 18+ site btw.

>>60911335
wasapi is default on windows

>>60911368
If you have nothing to contribute then fuck off, autist.

>>60911378
Its not. Wasapi only started working after i enabled it.

>>60911382
Forcing wasapi is really strange but it's impossible to check every machine setup. Windows had also some massive botnet infections recently and microsoft released huge updates that had some side effects and a lot of them are related to audio. I advice you to reboot windows correctly twice, it's not a shitpost, it seems it works for most of people suffering from audio issues. Maybe they fucked the mechanism that control wasapi and that why mpv can't use it at runtime.

>>60911382
>>60911530
Check Microsoft Update, sometimes Windows fails to install updates.

OP here, upscalers still dont work. Everything else in the config works. Sigh.

>>60912504
The price you pay for being retarded....

https://github.com/atomnuker/mpv for vo_vulkan.
OSD currently not working, please test

File: 1497065003489.png (2MB, 1920x1080px) Image search: [Google]

2MB, 1920x1080px

>>60910629
mpv with Vapoursynth enhancements produces this, now fuck off.

>>60912762
Didnt read the thread, retard? No one critiques your beloved player. Its not a MPV vs madVR thread. MPV just doesnt work correct for me, thats why i asked.

>>60912762
Nice oil painting.

>>60912801
log-file=log.txt
post it

How to enable OSD that shows dropped frames and other things?

File: upscale.png (2MB, 1920x1080px) Image search: [Google]

2MB, 1920x1080px

>still no NGU for mpv
>>60912762
MadVR produces this, which mpv users have still yet to match in terms of sharpness and lack of artifacts.

>>60910613
>>60910629
>>60910648
>>60910813
they all look the same

>>60913070
I hope no one will make NGU for mpv so retards like will stay on madvr

Also mpv users matched it almost 1:1

>>60912762
>Vapoursynth
Windows users can't even use this with mpv. AFAIK.
>From what I remember @lachs0r talking about VS, he doesn't add it to the Windows builds because compiling and making Python work on Windows is too much of a pain.
Lots of people on Google attempting and failing to build mpv with Vapoursynth. Not that Windows users will know how to build mpv in the first place. Not that Windows is a good OS to build software with in the first place. But yeah. MadVR is still a far superior option for Windows users.
Also, Vapoursynth is pretty fucking slow.

>>60913120
>Also mpv users matched it almost 1:1
Almost. With a slow solution that isn't even available on Windows.

File: 1455310099851.jpg (17KB, 354x238px) Image search: [Google]

17KB, 354x238px

>>60913143
>2017
>Still in the botnet

>>60913162
Dual boot. Linux does not compete with Windows as a multimedia/gaming OS. Use Windows for fun, Linux for security-critical usage like financials, etc.
>b-but muh privacy
>im-fucking-plying three letter intelligence agencies can't see what kind of hentai you like through backdoors in your router/modem/firewall/CPU

File: 1472997117795.jpg (103KB, 600x680px) Image search: [Google]

103KB, 600x680px

>>60913195
>2017
>being a gaymer

>>60912830
https://pastebin.com/dEp5L6S8

>>60912820
Just like NGU

>>60913428
Looks worse desu.

>>60913143
>>60913157
you can build mpv with vapoursynth support on windows very easily
https://github.com/jb-alvarado/media-autobuild_suite

File: kyoukolaugh.gif (140KB, 285x286px) Image search: [Google]

140KB, 285x286px

>>60913481
>Building everything from scratch takes about ~3 hours.
>you have to read walls of instruction text and wait 3 hours just for a slower solution that only almost matches MadVR's upscaling quality

>>60913403
>High bit depth FBOs unsupported. Enabling dumb mode.
>Most extended features will be disabled.

>>60913638
Laugh all you want, but the fact of the matter is that a single shitty avisynth script from 2009 produces an image that looks nearly identical to several of madshi's own shitty filters that took him months of work.

File: 14878205922961.gif (937KB, 500x357px) Image search: [Google]

937KB, 500x357px

Why not just use VLC or mphc?

>>60913739
everything leads to the same libav* shit

>>60913689
It looked suspicious to me too. Do you think its the cause of all of my problems?

>>60913787
This.
I miss CoreAVC and Matroska splitter.

I wonder how many people get broken playback like the OP ITT. Not many people test their settings visually. Might be a huge fuckup on mpv side.

>>60914004
or it could be user error, as is usually the case

File: good-grip.jpg (80KB, 708x531px) Image search: [Google]

80KB, 708x531px

simple functional pretty windows installer that behaves like all other windows software for normies when?

>>60914195
AFAIK you dont need an installer and just need to extract archive and it supposed to work, but not for me.

>>60914272
if I tell normie to instasll mpv they want normal installer, that places it in program files, ads it to uninstall list and sets association

its astonishing mpv lacks this considering its quite popular, but maybe its just my warp view from /g/ and from disgusting cringey animefags

>>60914298
If you need all of this, mpv has install.bat and uninstall.bat. Normies still wont use it because lol no GUI.

I'm retarded. How exactly do I use MPV on Windows 10 command prompt?

File: mpv-drop-file-here.jpg (24KB, 750x421px) Image search: [Google]

24KB, 750x421px

>>60914424
Why do you want to use it on a command prompt?

>>60914424
use mpv.com --help

>>60914424
>>60914476
welp, I mean

mpv.com --list-options

>>60914467
I'm trying to use commands like the one to list my audio devices. Don't you use command prompt for it?

>>60913403
Bump. Someone help me with this shit please. Cant make scalers to work. Win7 64bit, all updates installed. All drivers updated. No bloats and shit installed. Only open source software (except wingblows). Latest 64bit shinchiro build. My config is in the >>60910593

>>60914567
Just use MadVR. It produces higher picture quality and is user-friendly because its dev actually has talent.

>>60914567
Forgot to add. Everything i trow into config file works except for scalers.

>>60913021
https://github.com/Argon-/mpv-stats

>>60910593
This should be in the OP always.
https://github.com/mpv-player/mpv/blob/master/etc/input.conf

It's the default bind input.conf for if people want to modify anything or don't know the commands.

>>60912697
>>60905929
>Resizing still freezes my computer.
> https://pastebin.com/raw/bCspQGWm

>Force window causes segfault.
> https://pastebin.com/raw/Cm04TCVj

>>60914604
Are you sure? Judging by your log deband and color management don't work too.

>>60914526
just use the extended log

mpv.com -v file.mkv

File: 1470619765657.png (2MB, 1360x768px) Image search: [Google]

2MB, 1360x768px

>>60913021
Put this on config

 #OSD
osd-duration=2500

osd-status-msg='${filename} \n ${playback-time/full} / ${duration}${?percent-pos: (${percent-pos}%)} \n Frame: ${estimated-frame-number} / ${estimated-frame-count} ${?frame-drop-count:${!frame-#drop-count==0: Dropped: ${frame-drop-count}}} \n Bitrate: ${packet-video-bitrate}' 

Press O to show up. There's also the stats script.

any JS script yet?

File: 1422074724883.jpg (38KB, 475x339px) Image search: [Google]

38KB, 475x339px

Is there any way to have playlist or file view like VLC has? Or at least for MPV not to immediately close after a video ends? I'd love for a front-end with these sorts of options and context menu.

>>60915125
>Or at least for MPV not to immediately close after a video ends?
https://mpv.io/manual/master/#options-keep-open

>>60914786
Let me rephrase. Everything unrelated to opengl-hq works just fine.

>>60914934
Thanks anon. Do i need to download anything for this to work?
>>60914628
Thank you.

>>60915203
I would suggest updating to Win 8.1 at least.
Also what GPU?

>>60910648
https://diff.pics/eqcZe3St27cG/1

>>60915275
looks the same. upscaling is overrated anyways :^)

>>60915220
No, just put that on your config file. The button to show it up is by default O but if you changed it in your input.config then it will be different.

>>60915253
RX 470.

# Video
vo=opengl
profile=opengl-hq
hwdec=no
video-sync=display-resample

Is this good?

>>60913638
Update your pentium 4.

>>60915203
Try mpv 0.24
https://mpv.srsfckn.biz/mpv-x86_64-20170212.7z
See this issue
https://github.com/mpv-player/mpv/issues/4519

>>60916011
Thanks, ill give it a try.

I could care less about turning 1080p with blurriness into 1080p with globby lines and subtle ringing. Just watch the damn show,

TV anime isn't about visual quality anyway. People watch it on crap screens with overscan and enjoy it more than you do.

>>60915797
>Building everything from scratch takes about ~3 hours.
This was a quote from the github page.

>>60916489
that's because it's compiling 7gbs worth of shit. i compile mpv on it's own and it takes about 10 seconds.

>>60915194
There a way to make it go back to the start after ending with keep-open? Not looping, but just going back to the very beginning.

File: mpv jinc4 sharpest.png (2MB, 1920x1080px) Image search: [Google]

2MB, 1920x1080px

>>60910629

where to find audio device ID?

File: mpv jinc3 sharpest.png (2MB, 1920x1080px) Image search: [Google]

2MB, 1920x1080px

>>60910629
>>60917299

>>60917299
>>60917356
There's literally no difference autist.

>>60917299
>>60917356
why are you spergs still doing this

>>60917379
Because nobody has yet to match the MadVR upscale since MadVR is superior software.

File: 1463901780815.png (149KB, 423x384px) Image search: [Google]

149KB, 423x384px

>>60917391
Here >>60912762

>>60917373
Go check your eyes.

>>60917299
>>60917356
What's jinc sharpest?

>>60917391
Actually the mpv screenshot far surpassed it. Sorry sweetie.

File: 1389029496731.png (25KB, 759x551px) Image search: [Google]

25KB, 759x551px

>>60917346

scale=ewa_lanczos
scale-radius=3.2383154841662362
scale-blur=0.9264075766146068

scale=ewa_lanczos
scale-radius=4.2410628637960699
scale-blur=0.94315979943284770707

>>60917346
https://mpv.io/manual/master/#options-audio-device

>>60917446
>>60917473

File: 1497068070643.png (2MB, 1920x1080px) Image search: [Google]

2MB, 1920x1080px

>>60917420
>>60917455
The challenge was to produce an upscale as sharp and with as little artifacting/noise as the MadVR upscale and to post repeatable settings for doing so. The mpv upscale you are referring to is clearly less sharp in the circled areas here. It came close, but not quite.

>>60917373
Just checked, there's a pretty big difference.

>>60917475
I just don't understand where to input these commands. Command prompt just says it doesn't recognize them. Putting --audio-device=help into mpv.conf simply disables all audio because there's no device called "help."

>>60917498
you are doing it wrong, it is actually madvr that can't match mpv

>>60917541
t.mpvdev

File: 31-1819_f.jpg (57KB, 1500x750px) Image search: [Google]

57KB, 1500x750px

>>60917498

>>60917553
t.madvr shill

File: onesmugbrat.jpg (110KB, 535x545px) Image search: [Google]

110KB, 535x545px

>>60917589
>a shill
>for a free product

This autistic fag has been doing the same retarded "challenge" for weeks and still not banned, why are the mods so shit?

>>60915744
Yes.

>>60917535
>neo /g/
If you dont have mpv set as an environment variable then you have to point to the directory mpv is in.

>>60917717
I bet it's the same guy who kept posting the ogm webm. He's asshurt these threads exist for some reason.

File: 1463436400307.png (227KB, 466x572px) Image search: [Google]

227KB, 466x572px

>>60917535
The current state of /g/ folks.

>>60917535
in cmd

C:\pathtompv\mpv.exe --audio-device=help

How should I set the various cache options? Right now I have
cache=auto
cache-default=15360
cache-secs=10
cache-initial=2048
This way it should use cache only during streams, but it doesn't work, at least not with streamlink. Tried both with mpv.conf and with command line parameters, but nothing.

File: madvrvsmpvdone.jpg (259KB, 1375x875px) Image search: [Google]

259KB, 1375x875px

Mpv fags hate madvr because it's a windows renderer that doesn't work on linux and madvr shills hate mpv because it's a concurrent project that works on windows. However it seems there are only linux noobs that currently want ngu and other shits, because advanced linux users just can't use a software they can't build from source. For these noobs you just should use latest wine with mpc-hc and madvr, this solution works!

I finally fixed this stupid war! ;)
I know I am your savor, don't thank me, it's my job as human. ;)

>>60918141
I got it now, I had the directory before but just forgot to add the mpv.exe

>>60910593
how to make mpv open multiple files in same window?

>>60918240
If you look up on how to add a program to your PATH you can just type "mpv" instead of having to write the full path and filename each time.

>https://github.com/mpv-player/mpv/wiki/Stuff-to-do/_compare/5f94496%5E...5f94496
>Help with LGPL relicensing. (Stuff like talking to people, or finding out who else has to be asked or not asked.)

Holy fucking shit! I just understand why wm4 was so kind, social, less autistic!
Didn't know developing foss could fix my autism!

>>60918214
Nobody that isn't already using the buggy placebo piece of shit that is madVR wants NGU, foozoor.

>>60918308
I want NGU AA. It's the best upscaler available.

>>60918308
>placebo
>look at finalities of both projects
>the same shits

>16 posters ITT
Sad.

>>60918327
Just ask igv if he can and/or want to create a NGU AA like shader.
But please don't ask him for NGU Sharp, he already said SSimSuperRes was really close enough to NGU Sharp.

>>60918327
Please don't ask madshi for NGU AA source, it's completely pointless.
The best available way is a new shaders leak but it seems madshi fixed the leaky part of his product.

>>60918308
NGU AA is like sprinkling fairy dust and unicorn farts on low bitrate Pornhub downloads.

>>60918443
No with/without pics. It's just a trolling post!

>>60918327
Just wait for his $500 vapoursynth compatible blob aka madVR Pro.

>>60918481
What is madVR Pro?

>>60918494
Something he just made up.

>>60918197
streamlink should have its own config file with its own cache options. when you open a stream with streamlink it handles the transport of the av feeds, not mpv
(if i remember correctly that is)

>>60910593
anyone know a good media player for 2gm ram laptop?

Madshi - My madProduct is the best thing ever.
Wm4/Haasn/... - Everything is a shit.

I suppose many people are using madVR because they have an optimistic life and no problem with political, ethical, scientific and philosophical things.

>>60918508
It does unless you specify passthrough for a given protocol, which is usually faster so there's less of a delay.

>>60918327
>falling for memes

>>60918675
The comparisons which have been posted speak for themselves.

>SSimSuperRes
>locality(116): 4.0 -> 8.0 -> 100.0
>locality(356): 100.0 -> 16.0 -> 8.0
Why are there so many changes for this variable name?

>>60918685
they're identical in motion
you do actually watch your chinese cartons and not just take screenshots right?

File: nvidiampv.png (111KB, 966x812px) Image search: [Google]

111KB, 966x812px

i have a laptop with i5-4210u and geforce 820. should i do pic related with mpv using nvidia processor or keep defaults?

>>60918710
NGU AA's ability to hide artifacts and noise is magnified in motion.

>>60918730
I have perfect vision and dont notice a difference
are you even paying attention to the story?

>>60918730
>in motion
You won't notice any of this during playback

>>60918780
I do. Do you all have itty bitty displays?

>>60918765
PC monitor or Digital TV?
What the distance between the screen and your eyes?

File: background9.jpg (286KB, 1920x1200px) Image search: [Google]

286KB, 1920x1200px

I know pretty much nothing about media players so I'd like to know what makes mpv better than something like vlc?

>>60918819
4k monitor
3-4 feet

>>60918912
The madVR is only useful for oldish TV or projectors.

>>60918885
Everything is better than VLC anon except maybe Windows Media Player

>>60918946
Sure, but can you explain why?

>>60918941
lol

>>60918956
Scaling, color reproduction, wider format playback, support for more complex encodes etc

Meanwhile I use MPC-HC and everything just werks

>Argon-
>https://github.com/Argon-/mpv-config/commit/9a6c2effa76baa075fd146d89269cbbafa46ae16#diff-6057f9d0766d11ebf081a8ba6778d8fbR116
Sigmoid-slope=10 as default when?

File: 1495121298663.jpg (85KB, 1280x720px) Image search: [Google]

85KB, 1280x720px

>>60919048
Why don't just set it yourself?

File: unnamed.png (14KB, 300x300px) Image search: [Google]

14KB, 300x300px

>>60910593
Seriously, I've always been a VLCfag, can someone post a config that is good for a newfag like me? I want sharp shit, I have a 1440p monitor, need to put the sucker to it's knees, just like my GTX 1070.

WindowsFag here too, so please be compatible.

>>60919129
madVR

>>60919129

profile=opengl-hq
scale=ewa_lanczossharp
cscale=ewa_lanczossharp
dscale=ewa_lanczossharp
sigmoid-slope=10.0

Anything more is autism

File: vlc_2017-06-15_20-43-21.jpg (1006KB, 2560x1440px) Image search: [Google]

1006KB, 2560x1440px

>>60919233
VLC One.

File: mpv_2017-06-15_20-44-15.jpg (1MB, 2560x1440px) Image search: [Google]

1MB, 2560x1440px

>>60919233
MPV with that config. Its not that noticeable... A liiitle bit more sharp but not even close to the first pictures that were posted.

>>60919383
>>60919399
>.jpg

File: mpv_2017-06-15_20-55-33.png (3MB, 2560x1440px) Image search: [Google]

3MB, 2560x1440px

>>60919494
Here you go

File: vlc_2017-06-15_20-55-55.png (2MB, 2560x1440px) Image search: [Google]

2MB, 2560x1440px

>>60919494
>>60919540
How can MPV shills ever recover?

https://huddle.github.io/Resemble.js/

> The second image is 0.06% different compared to the first.

>>60918197
I use this mostly to watch some stuff from my seedbox and works fine for me, remove # from the front if you're gonna use http/s

 [protocol.https]
#cache=yes
#cache-default=500000
#cache-backbuffer=250000 
cache-secs=100 
user-agent='Mozilla/5.0 (Macintosh; Intel Mac OS X 10.11; rv:47.0) Gecko/20100101 Firefox/47.0'

[protocol.http]
#cache=yes
#cache-default=500000
#cache-backbuffer=250000
cache-secs=100
user-agent='Mozilla/5.0 (Macintosh; Intel Mac OS X 10.11; rv:47.0) Gecko/20100101 Firefox/47.0'

[protocol.ftp]
cache=yes
cache-default=500000
cache-backbuffer=250000
cache-secs=100
user-agent='Mozilla/5.0 (Macintosh; Intel Mac OS X 10.11; rv:47.0) Gecko/20100101 Firefox/47.0'

>>60919540
>>60919555
Honestly couldn't tell the difference.
Zooming in on the nose though, the mpv one is slightly better, vlc is more blurry

>>60919129
I honestly don't know if these commands help or not, but it works just fine for me

 vo=opengl
profile=opengl-hq
opengl-backend=angle
scale=ewa_lanczossharp
cscale=ewa_lanczossoft
dscale=mitchell
tscale=oversample
dither-depth=auto
correct-downscaling=yes
sigmoid-upscaling=yes
volume-max=100
hwdec=no
correct-downscaling
autofit=85%x85%
snap-window
fit-border
save-position-on-quit
no-border
keep-open

What I recommend though is using Argon's config as template and remove or change however you like https://github.com/Argon-/mpv-config/blob/master/mpv.conf

>>60918197
>>60919757
How can I make [protocol.http] override any [extension.mp4] options?

I want a small cache for my local files so that if they're still being downloaded mpv won't try to cache where there is no data yet, but I want files online to cache fully so that I can skip through them without having to buffer.
When a file fits both the http and .mp4 criteria mpv loads both profiles and it ends up using the small cache options from extension.mp4

Why does my MPV window disappear when I drag a youtube URL into it?

>>60919865
Use the console and see the error.

>>60919865
do you have youtube-dl?

>>60919851
You have [extension.mp4] set up? Have you tried doing just a general setting like this?

 #CACHE
cache=yes
cache-default=250000
cache-backbuffer=10000
cache-initial=10000
cache-secs=15

I have it like that and then specific ones for webm, gifs and web protocols, seems to work here

>>60920179
no

>>60920223
>https://github.com/rg3/youtube-dl/releases
Then download the .exe and put it in the same directory mpv is.

>>60918508
Ok now it works. I indeed had to use the streamlink config file. Actually, using the mpv config file was ok too, but apparently mpv doesn't realize it's playing a stream when streamlink handles it, so it probably assumes it's a local file. And because cache=auto only uses cache with streams, it didn't work. Fuck, it sounds so obvious now.

Here's what to add to the streamlink config file if anyone's interested:
player=mpv --cache=yes --cache-default=15360 --cache-secs=10 --cache-initial=2048

File: 14975258786471.png (4MB, 1920x1080px) Image search: [Google]

4MB, 1920x1080px

>>60910613
>not using enhanced ewa

>>60920768
this looks better than madvr

>>60920883
By "better" you mean a lot blurrier.

>>60920917
this >>60920768
is not blurrier than this >>60910613

>>60921052
this >>60920768
is a lot blurrier than >>60913070

>>60921078
thats not what that anon was comparing retard

>>60921120
>this looks better than madvr

>>60921152
>While madVR Jinc with no additional enhancements produces this.
Learn to read.

>>60921186
>>60920883 should have been more specific. He made a blanket statement that >>60920768 looked "better than MadVR." He was then correctly told that his statement was incorrect.

>>60920768
how do i use enhanced ewa

>>60921732
Soon.

Is it still good to keep VLC for audio and this for video?

>>60921885
I don't know what the recommended Linux music player is but if you're on Windows you should be using Foobar2k.

>>60918701
Increasing these localities reduces sharpness (in a bit different way)
Increasing locality(317) increases sharpness

>>60919233
>dscale=ewa_lanczossharp
>Anything more is autism
lol

>>60919129
Former VLCfag here. I made this config to have a few binds similar to VLC.

#window control
z add window-scale 0.2
Z add window-scale -0.2

#volume control
AXIS_UP add volume 5
AXIS_DOWN add volume -5


#seeking
RIGHT seek 1
LEFT seek -1
Ctrl+RIGHT frame-step
Ctrl+LEFT frame-back-step
PGUP add chapter -1                   
PGDWN add chapter 1  # skip to next chapter

#for playlists/next file
Ctrl+PGDWN playlist-next                        # skip to next file
Ctrl+PGUP playlist-prev                        # skip to previous file

#screenshots
Shift+F5 no-osd screenshot                     # take a screenshot
F1 no-osd screenshot
F2 no-osd screenshot video
F5 no-osd screenshot video                     # ...without subtitles
Ctrl+Shift+F5 no-osd screenshot window         # ...with subtitles and OSD, and scaled

#subtitles
s cycle sub                            # cycle through subtitles
S cycle sub down                       # ...backwards
x add sub-delay 0.1 
X add sub-delay -0.1 

# cycle video aspect ratios; "-1" is the container aspect
r cycle-values video-aspect "16:9" "4:3" "2.35:1" "-1"

#fullscreen control
f cycle fullscreen                     # toggle fullscreen
ESC set fullscreen no

File: 1469547419884.png (122KB, 514x409px) Image search: [Google]

122KB, 514x409px

>>60921885
If you're on windows I recommend foobar2k for audio:
http://www.foobar2000.org/

>>60922242
I use Fobar for listening to music, but I always have another media player specifically for if I just want to test an audio file really quickly or for playing music over the microphone with virtual audio cable.

why is sigmoid-slope=10 the best? can someone explain?

>>60922257
>or for playing music over the microphone with virtual audio cable.
Oh lawdy, don't tell me you bought the WASAPI meme.

>>60922291
Don't even know what that is. I just have a virtual microphone and then set it as the input device for my secondary media player so that whatever audio I play is relayed.

Niggas saying left and right that MPV is better but the almighty config is not to be found.

Just as I pointed out here:
>>60919540
>>60919555

>>60922316
https://diff.pics/Nn01jOszfAMq/1

profile=opengl-hq
opengl-shaders="~~/SSimSuperRes.glsl"
scale=ewa_lanczos
sigmoid-slope=10

>>60922260
bump

>>60922358
No reason to use anti-ringing

>>60922349
Fucking finally a guy that has a config that isn't autism.jpg.

Used NHK DVDRip 480p.
https://diff.pics/xjbxK8j7xMtj/1

>>60922349
>>60922462
Can I get even more sharp than this? Processing power is not a problem. Just that I'm running Windows.

>>60922473
adaptive-sharpen.glsl

>>60922473
>Can I get even more sharp than this?
MadVR.

>>60922531
madvr will be blurrier, unless you additionally use madvr sharpeners, which are worse than adaptive-sharpen.glsl

>>60922495
Nah, SSimSuperRes.glsl is better, Am I doing something wrong?

Which is the correct way to put on conf?
opengl-shaders="~~/adaptive-sharpen.glsl"
opengl-shaders="adaptive-sharpen.glsl"

I left the two just in case. Here's the comparison between SSimSuper(1) and Adaptive(on mouse over):

https://diff.pics/tFlXWYUeTJgt/1

>>60922585
opengl-shaders="~~/SSimSuperRes.glsl,~~/adaptive-sharpen.glsl"

>>60922599
Ohh, you combine them? MAXIMUM SHARPNESS?

Am I become a believer, destroyer of VLC.
https://diff.pics/rhG9knAcaEoD/1

>>60922599
>>60922649
Sorry for over staying your welcome but the noise can be mitigated? even by a little?

My guess its the byproduct of a 480p source and can't be removed?

>>60922670
Try deband-grain=0

>>60922690
Ma boi.

Thank you based-mpv.
https://diff.pics/8LbfNXCHczCs/1

File: [Tsundere] Sabagebu! - 01 [BDRip h264 1280x720 10bit FLAC][1D1F2C82].mkv 00_07_00.836.png (2MB, 1920x1080px) Image search: [Google]

2MB, 1920x1080px

bump

>>60912762
OK, I compiled mpv with vapoursynth. Is there a guide on how you make it look like this? I can only tweak the config file.

>>60923236
you then reencode your video using vapoursynth filter like lsfmod, because using it in realtime is retarded

>>60922136
OK! Thank you!

File: Dopamine-features-a-gorgeous-easy-to-navigate-interface.jpg (224KB, 1000x689px) Image search: [Google]

224KB, 1000x689px

>>60922242
I am not a windows user it what about dopamine?
It's fully open source!

>src:
https://github.com/digimezzo/Dopamine/commits/master
>download:
http://www.digimezzo.com/content/software/dopamine/previews/

>>60921792
No more precisions? :)

>>60921792
scale=enhanced_ewa_lanczossharp
or
opengl-shaders="~~/EnhancedEwaLanczossharp.glsl"

>>60924735
1st of course, it's not a prescaler or post-processing filter

File: Capture.png (24KB, 640x546px) Image search: [Google]

24KB, 640x546px

>>60924735
>>60924792
what did he mean by this

>>60919814
>Argon
Who is he?

>>60924907
The first one wanted to know if Enhanced EWA will be merged in mpv master or just a user-shader.

The second one said he will make a pull request soon with Enhanced EWA variants but it's maybe just a troll. So wait and see!

File: 55062635.jpg (31KB, 499x451px) Image search: [Google]

31KB, 499x451px

NIGGAS. I just noticed that i have a problem like the OP. My shits look like its upscaled by fucking bilinear. Changing scale to different things makes no change. Other things werk as intended in the config. What the actual fuck. Ive been using it like that for a while. Holy shit.

is there really anything new in the enhanced ewa paper? it's from 2009 which seems very old to me...

>>60925018
From command line:
mpv video.mkv

Is there a message like this:
>High bit depth FBOs unsupported. Enabling dumb mode.

>>60925054
YES! Also:
>No advanced processing required. Enabling dumb mode.

>>60925122
Probably ANGLE bug.
Some one should report it on github.
Try different backend
opengl-backend=dxinterop

File: 43927005.jpg (87KB, 574x494px) Image search: [Google]

87KB, 574x494px

>>60925139
ANON YOU ARE MY SAVIOR. FUCKING HELL WHAT THE FUCK. Sorry for yelling it works as intended now with
>opengl-backend=dxinterop
No more "dumb" anything, log looks clean and without errors. Picture is actually LOOKS GOOD now (tested with haasn's samples, before it looked like mess).

IVE BEEN USING IT LIKE THAT FOR LIKE HALF A YEAR. JESUS CHRIST I SWITCHED TO MPV FROM FULL AUTISM MODE MADVR. AND IT WAS FUCKING BILLINEAR ALL THIS TIME. AAAAAAAAAAAAAAAAA.

Everyone need to fucking check their shit with test picture of haasn here >>60911158

Ive used all this time and thought it were working...
profile=opengl-hq
scale=ewa_lanczossharp
cscale=ewa_lanczossharp
dscale=ewa_lanczossharp

Im in fucking tears right now.
>>60910593
Thank you, OP. If not for you id never even check this shit out.

>>60925197
>>60925139
> dxinterop isn't default

I don't get it. It's better than angle. No issues with frame pacing, low frame latency, display-resample works great

>>60925197
>dscale=ewa_lanczossharp
mitchell and catmull_rom are much better for downscaling though

>>60925197
Damn...

>>60925197
Wincuck BTFO.

>>60915744
why no hardware decode?

>>60925256
it depends
angle works better for me

I get lag when I play fullscreen 1080p
how to fix?

>>60925415
Tried it on 3 different PCs

i5 3350 + 970
phenom x3 + 5670
amd a4-5400 apu

Dxinterop worked better with both default settings and especially with a riced mpv.conf such as using spline36 or lanczos, debanding, etc.

>>60925418
Depends.

>>60925197
>IVE BEEN USING IT LIKE THAT FOR LIKE HALF A YEAR. JESUS CHRIST I SWITCHED TO MPV FROM FULL AUTISM MODE MADVR. AND IT WAS FUCKING BILLINEAR ALL THIS TIME. AAAAAAAAAAAAAAAAA.

Just goes to show how placebo meme player /v/ really is.

With video-sync='display-resample', should I turn framedrop off?

>>60925256
>It's better than angle.

dxinterop does not even work for me.

For example profile=opengl-hq + opengl-backend=angle + hwdec=no works as expected but if I change backend to dxinterop opengl-hq clearly stops working and danding/blocking is present.
I use NVidia card fwiw.

>>60925456
on what

>>60925570
Your problem.

>>60925579
that's the problem
lag

>>60925525
Anyone can help me make dxinterop + opengl-hq work?

We all know MPV is the best media player for gnu/linux. But what's the best video player for android? Preferably something open source with good hardware decoding support. There is an mpv port on the play store- is it worth using? I've also seen vlc and mx player recommended.

>>60925784
That's not a problem.

>>60925793
Works for me.

>>60925418
Try to change scale and cscale to spline36

Guys anyone has haasn's mpv config? Gib link pls?

>>60925964
That's more intensive than the default though.

>>60925270
Too blurry.

>>60925999
Post your config and specs. A log would help too.

>>60926011
I'm not the original asker, how would my config and specs help? If you're assuming I am, why didn't you just ask him first instead of providing a fix that has no reason to work?

>>60926020
That's not me though.

>>60925812
I beg to differ

>>60926020
I was assuming that he was using a higher scaler. I should have asked him to provide his specs and log first. My bad.

hey i use mpv on fedora. can someone show me the best configuration? i'm using a modern built desktop, thanks :)

Rate my config.

# Video
vo=opengl
profile=opengl-hq
interpolation
video-sync=display-resample
hwdec=no

>>60926424
Not enough autism/10.

# Video
vo=opengl
profile=opengl-hq
opengl-backend=dxinterop
opengl-hwdec-interop=cuda
opengl-shaders="~~/shaders/SSimSuperRes.glsl,~~/shaders/adaptive-sharpen.glsl"
hwdec=cuda
hwdec-codecs=h264,hevc

# Scaling
scale=ewa_lanczos
cscale=ewa_lanczos
sigmoid-center=0.8
sigmoid-slope=10.0

# Interpolation
interpolation=yes
tscale=oversample
video-sync=display-resample

# Misc. video
deband-grain=0
deband-iterations=2
deband-range=12
deband-threshold=48

>>60926424
>

vo=opengl

Its in defaults, unneeded.
>

interpolation

Why thou?

>>60926666
>Its in defaults, unneeded.
So is

hwdec=no

>Why thou?
Looks nice.

>>60925910
t-t-thanks for the help.

>>60910613
>>60910629
Looks the very fucking same to me

How do i make youtube and twitch playing in mpv? I thought shinshiro's build supposed to play them out of the box? Im getting errors when putting url into player.
>Opening failed or was aborted: unrecognized file format (reason 4)
>Failed to recognize file format.
Pls help.

>>60922554
>he says as >>60913070 STILL remains unmatched by mpv

>>60926131
Sure, but it all depends on what lag the discussion is about, considering it's not defined we're both right.

>>60926798
Download youtube-dl.

>>60926705
Post the log.

>>60926798
>>60926915
run the updater.bat. It will download youtube-dl for you

>>60927113
Thank you!
>

@echo OFF
:: expand searching for 'updater.ps1' file in same folder as mpv.exe too
if exist "%~dp0\installer\updater.ps1" (
    set updater_script="%~dp0\installer\updater.ps1"
) else (
    set updater_script="%~dp0\updater.ps1"
)
powershell -noprofile -nologo -noexit -executionpolicy bypass -File %updater_script%

What it does, i dont get it. Do i need to allow anything besides mpv in my firewall?

# Video settings
profile=opengl-hq
hwdec=no
deband-iterations=2
deband-range=12
video-sync=display-resample

# Profiles
[FHD]
profile-desc=cond:get('height',0) >= 1080
scale=bilinear
cscale=bilinear
opengl-shaders="~~/shaders/adaptive-sharpen.glsl"

[SD/HD]
profile-desc=cond:get('height',0) <= 720
opengl-shaders="~~/shaders/SSimSuperRes.glsl"
scale=catmull_rom
scale-param2=0.6
cscale=ewa_lanczos
sigmoid-slope=10.0

Rate?

>>60928061
>cscale=bilinear
no

File: 86945991.jpg (13KB, 300x299px) Image search: [Google]

13KB, 300x299px

Hardcore madVR fag here. Im very impressed by ewa_lanczos+ssimsuperres. I think it looks better than NGU AA Very High (for animu 720->1080, at least). Just need to do something with stronk ringing. Pls help. Im a newfag to mpv. Im actually in shock right now.

My current settings:

opengl-backend=dxinterop
profile=opengl-hq
scale=ewa_lanczos
cscale=ewa_lanczossharp
dscale=mitchell
interpolation=yes
tscale=oversample
video-sync=display-resample

#SSimSuperRes

opengl-shaders="~/SSimSuperRes.glsl"

log-file=log.txt 

>>60928282
Try sigmoid-slope=10.0 I see a lot of people saying this is good for ringing.

>>60928282
> ~/
It doesn't even work if you use it like that
see here >>60922349

>>60928348
>It doesn't even work if you use it like that
I just removed my path, man. Thanks anyway.

>>60928282
NGU can avoid ringing artifacts, there is nothing like that for mpv.
SSimSuperRes works as anti-ringing only, but not deringing

>>60923635

Nigger

File: lanczos+ssimsuperres vs NGU AA Very High.png (416KB, 2064x566px) Image search: [Google]

416KB, 2064x566px

>>60928282 Here.
I made a comparison of ewa_lanczos+ssimsuperres vs NGU AA Very High.

Left is lanczos. Right is NGU.

Lanczos has lots of ringing and slightly more artifacts while NGU has some nasty lines. Pls help me to improve left picture. I tried sigmoid-slope=10.0 but it didnt really help.

is there any reason to use mpv and all of this stuff over something like k-lite for the average user?

File: Capture1.png (15KB, 454x66px) Image search: [Google]

15KB, 454x66px

vo=opengl
profile=opengl-hq
deband=yes
deband-iterations=4
opengl-backend=angle
angle-renderer=d3d11
opengl-hwdec-interop=cuda
hwdec=cuda
hwdec-codecs=h264,hevc,vc1,mpeg2video,mpeg4,VP8,VP9
vd-lavc-threads=4
scale=ewa_lanczossharp
cscale=ewa_lanczossharp
dscale=ewa_lanczossharp
correct-downscaling=yes
sigmoid-upscaling=yes
sigmoid-slope=10.0

Can I improve this?
Is my GPU going to die?

Does this ~~/ mean that the script is in the same location? Yeah I'm a retard

>>60928992
You could start by removing these, since they are already part of the opengl-hq profile.

vo=opengl
deband=yes
correct-downscaling=yes
sigmoid-upscaling=yes

>>60928348
Oooh. I learned that you can just put

opengl-shaders="~~/shaders/nnedi3-nns32-win8x4.hook"

And it will work. No need to include full file path. Thanks!

>>60929041
https://mpv.io/manual/master/#paths

>>60928992
>opengl-backend=angle
>angle-renderer=d3d11
Cuda doens't work with Angle, use

opengl-backend=win

or

opengl-backend=dxinterop

>vd-lavc-threads=4
>Number of threads to use for decoding. Whether threading is actually supported depends on codec (default: 0). 0 means autodetect number of cores on the machine and use that, up to the maximum of 16. You can set more than 16 threads manually.
Are you guys idiots?

Can someone help me with nnedi3 doubling twice please. I use:

opengl-shaders="~~/shaders/nnedi3-nns32-win8x4.hook,~~/shaders/nnedi3-nns32-win8x4.hook"

And it only doubles once. Stats don't change if i remove second one.

>>60929129
>

opengl-backend=win

or

opengl-backend=dxinterop

wats the best
wats the difference

>>60928864
>Lanczos has lots of ringing
That's not lanczos ringing, that's your video has lots of ringing.

>Pls help me to improve left picture.
Re-encode it with HQDering or download a better quality rip.

>>60929270
>that's your video has lots of ringing.
Yeah, yeah, okay. Now help me to improve left because right doesn't have this problem.

>>60929307
see >>60928507

>>60929246
>https://mpv.io/manual/master/#options-opengl-backend
>https://github.com/mpv-player/mpv/issues/3840#issuecomment-262827313
If dxinterop works fine in your system, doesn't crash or work slower, you can use it.

>>60929129
Yes, I'm an idiot.
Thanks. I changed those and now my gpu isn't getting maxed out now.

>>60926647
underrated

Bump with >>60929224 + new shader question.
I have both nnedi3 + ssimdownscaler but nnedi3 wont load for some reason, only ssim.

>>60925270
>mitchell and catmull_rom are much better for downscaling though
Why? They are blurry. Granted, it prevents certain artifacts but only because it smooths them over...

>>60929335
Thanks m8

>>60929459
mitchell+ssimdownscaler is the best, desu.

>>60929446
Never mind this one. Fixed it by putting ssim after nnedi in one line, instead of using two separate lines. Still need help with >>60929224

How do i control anti ringing with ssimdownscaler? How do i even configure it at all?

>>60929542
Just make a copy of the file and rename it to nnedi3-nns32-win8x4-2.hook or something.

>>60929507
You mean blurrier than other options, then yes, I agree.

>>60922349
>>60922599
>>60922690
Thanks guys, my animu is looking great

profile=opengl-hq
opengl-shaders="~~/SSimSuperRes.glsl,~~/adaptive-sharpen.glsl"
scale=ewa_lanczos
sigmoid-slope=10
deband-grain=0
hwdec=no
video-sync=display-resample
vf=format=rgba

>>60929601
There is only strength at the end.

File: scaling.jpg (12KB, 307x96px) Image search: [Google]

12KB, 307x96px

>>60929699
>

opengl-shaders="~~/SSimSuperRes.glsl,~~/adaptive-sharpen.glsl"

I dont think its a good idea to use sharpener on sharpener. Try adaptive with low resolution content in low volumes and use ssimsuperres with things that dont need much upscaling like 720->1080.

Is there any way to achieve pic related in mpv??? It be VERY useful.

>>60929270
Actually, if NGU AA doesn't show ringing, but EWA Lanczos does, then the ringing must be caused by EWA Lanczos, because NGU AA does *not* remove ringing. NGU Sharp/Standard/Soft do reduce/remove ringing, but NGU AA does not.

>>60929731
Upload source of your image
SSimSuperRes is anti-ringing. If there is ringing, it's in the source.

>>60929766
>SSimSuperRes is anti-ringing
Not that anon but citation needed.

>>60929729
>Try adaptive with low resolution content in low volumes and use ssimsuperres with things that dont need much upscaling like 720->1080.
It's actually other way round.

>>60929792
>It's actually other way round.
I dunno low res images/videos look ugly with ssimsuperres to me. Source's artifacts are too obvious with it.

>>60928061
Change the cscale in your FHD profile for spline36.

File: artest.jpg (8KB, 100x80px) Image search: [Google]

8KB, 100x80px

>>60929777
Try it on this image

File: subsss.jpg (51KB, 500x182px) Image search: [Google]

51KB, 500x182px

Why subs look like that in mpv? Top is xysubfilter.

>>60929729
>I dont think its a good idea to use sharpener on sharpener
Why not?

>>60930013
Looks ugly.

>>60928282
https://diff.pics/f9fANMvcErf0/1

>>60928864
i literally can't see the difference

>>60930063
Every one knows that when your video is infested with ringing and aliasing artifacts NGU is much better

>>60924949
>Who is he?
He made this: https://github.com/Argon-/mpv-stats
Also looked through his config when I was new to mpv. It's annotated so you can just grab a few options you like. Faster than reading the man page.

>>60930021
http://screenshotcomparison.com/comparison/212916

>>60928061
>

scale=bilinear
cscale=bilinear

>

scale=catmull_rom

wtf no.

>>60930450
Watch your cscale buddy (top right corner).

>>60930499
wut
>>60930450
Just testing
http://screenshotcomparison.com/comparison/212919

File: s.png (28KB, 131x113px) Image search: [Google]

28KB, 131x113px

>>60930593
>wut

I have a 1060 and use hwdec but seems like a lot of people are against it, why? I don't see any difference with or without

>>60930836
I always use hwdec myself. I think people are against it because you can't use shit like vapoursynth with it. Any complaints I see about quality otherwise seem unfounded to me.

>>60930836
First of all, there are different hardware decoders. Some are completely fucked up, some are decent.
Potential problems: they perform conversions (badly, of course) and mpv can't perform proper color management. In cases they align croma and luma planes (e.g. to convert to RGB) and do this using bad algorithms (usually bilinear or bicubic) and mpv can't use your cscale. Stuff like that can but doesn't have to happen. Some also shit themselves with certain formats.

There's also no benefit using them, really. The one major benefit is potentially lower energy usage on mobile hardware. However, with CPUs being good and software more optimized than ever, h264 decodes in software nearly as efficient as in hardware. So there's really no point, especially not when you are on a desktop. So why risk the problems mentioned above?

There's one exception though and that's when your software decoder is not fast enough. This is the case for h265 where software just isn't nearly as optimized as with h264. Trying to decode h265 4K 60FPS in software is probably impossible for most systems, here you need hwdec.

nnedi3 in mpv looks better than nnedi3 in madvr. What the fuck.

>>60930994
decoding HEVC is intensive but when I read about hwdec none of them looked safe, is there a way of telling which one you're using?

>>60931367
Not sure. Different operating systems have a set of different drivers available and there's no general rule which ones are fucked up.

>>60930994
Is cuda safe?

>cuda should always be preferred unless the opengl vo is not being used or filters are required.
From the manual.

>>60931421
Don't know. This might also vary depending on driver versions etc. (on Linux you usually have multiple alternatives, each fucks up differently)

Also, the *-copy modes are required when you want to use filters and stuff but then the hardware decoder does even less stuff and there's even fewer reasons to use it at all.
(The case of h265 still being an exception of course)

>>60929729
>Is there any way to achieve pic related in mpv??? It be VERY useful.
I want this too.

>>60929946
Looks like it's just a difference in default subtitle styling.
There are a ton of options you can tweak to get it looking however you like it: https://mpv.io/manual/master/#options-sub-font