You think i could fit modern pc in one of these type of case?
>>56595724
Of course. It's probably even standard ATX.
Probably.
It doesn't look very cooling efficient tho.
Use a PS/2 case instead.
>>56595724
It will probably be difficult to fit a modern video card and a modern CPU cooler in it, but other than that it should work fine. Why would you want to though? Those cases are terrible.
>>56595789
The PS/2 came way before the ATX standard so that would probably be considerably more difficult.
Not a standard mobo you can fit there, there's only half the space reserved for it and those mobos are L shaped.
Installing a new SSD and haven't screwed the top down yet.
>>56595724
Good luck getting those switches/plugs/leds to work though
For the GPU you can fit a SFF one in it like a 750 ti, dunno how big of a PSU would fit in there though
>>56595762
>>56595747
Mine has 2 dvd drivers slots. i want to make it one dvd drive and one usb and cards slots but not a small one but full sized one like the pic
>>56595846
should be very easy to do. just plug in motherboard.
That aside how do i connect the floppy drive to a new mother board?
>>56595929
How is call?
>>56595999
cant argue with those triple digits
>>56595762
>cooling
Cant i drill out the back and put a big silent fan on there blowing air?
>>56595789
AT. The switch works differently, it doesn't have the same cutouts and slot positions in the back.
bump for help
>>56595789
those things are the definition of proprietary
plus microchannel boxes are way cooler than some plebeian ITX build ever will be, don't waste good hardware on shallow hipster fantasies
>>56596258
okay, so what are you going to do for intake then?
>>56595724
find another old atx system from like a p4 to scavange from
>cut off switch connectors if you have to and solder them to the switches on the case you want to use if those connectors won't work.
>blast a hole in the side with a hole saw for a fan as an intake
>blast another hole somewhere in the back or the other side for another fan as an exhaust
>und up cutting out the back panel and fabricating one because nothing lines up.
they make sata to 2.5" ide adapters if you want to actually use the floppy,
blast
>>56597821
I was thinking trough the back in and out, devided by cardboard?
>>56597941
>sata to 2.5" ide adapters if you want to actually use the floppy
>ide
>floppy
u wot m8
>>56598316
unless you can exhaust the hot air far away from the intake, the hot air is just gonna get pulled back in
>>56598316
Maybe you could give the case some small rubber feet, then make an intake at the front of the case floor
>>56597941
>floppy
>2.5'' IDE
Why is /g/ so fucking dumb?
>>56595724
Not really. Technically it does, but there is 0 cable management in the old cases, so it looks horrible.
>>56599182
This would suck in a lot of dust though.
>>56599357
So filter the intake. You should do this regardless of where the intake is.
>>56599193
Why don't you stop swearing?