Things we made

File: crash2.jpg (199KB, 965x530px) Image search: [Google]

199KB, 965x530px

Made a crash bandicoot mask, all i have to do now is find some colorful feathers and attach them to the top

File: 13239401.jpg (76KB, 960x540px) Image search: [Google]

76KB, 960x540px

Made this monstrosity out of scrap and leftovers

>>997731
>calling an aku aku mask a crash bandicoot mask

>>997754
Cool love it!

File: 13226665.jpg (117KB, 960x540px) Image search: [Google]

117KB, 960x540px

Oh and this coffee table.

I fucking suck at woodworking.

>>997764
It looks alright. Too bad you couldn't use the same size board all across

>>997731
Please tell me you have plans to make him glow and float.

File: 1459552651903.jpg (41KB, 600x440px) Image search: [Google]

41KB, 600x440px

>>997764
>>997754
>>997731
>>997727

File: PICT4381a.jpg (844KB, 3008x2000px) Image search: [Google]

844KB, 3008x2000px

>>997727
Made this for fixing old Tube radios.

File: PICT4573a.jpg (662KB, 3008x2000px) Image search: [Google]

662KB, 3008x2000px

>>997863
and this 10 amp regulated DC power supply.

File: IMG_20150619_154442808a.jpg (2MB, 5248x3936px) Image search: [Google]

2MB, 5248x3936px

>>997865
A remote controlled power strip that can switch between 3 different 1 amp outlets, using the controller from an old remote controlled fan.

File: PICT3959.jpg (944KB, 2658x1375px) Image search: [Google]

944KB, 2658x1375px

>>997866
A small single ended stereo tube amp.

File: WS1.jpg (2MB, 3200x2400px) Image search: [Google]

2MB, 3200x2400px

Finally finished off the axe yesterday

Now I've got to get back to finishing off a couple of kitchen knives.

>>997756
somebody would have just called them needlessly pedantic if he referred to it otherwise, it got the point across.

File: IMG_20160524_005201.jpg (320KB, 1639x902px) Image search: [Google]

320KB, 1639x902px

earbud wrap. I just took a model from thingiverse and chopped off part, forgot to round the corner

File: IMG_20160519_185051.jpg (250KB, 1638x898px) Image search: [Google]

250KB, 1638x898px

knuckle dusters. The shape is staying simple until I get dimensions that feel good. I have 8 minor variations about to print so that I can try the various sizes

>>997962
>this kills the cable

>>997963
fillet the edges and contour the palm part so it's easier on the hands

>>997986
I've been using it for a few months and haven't had any issue with the cable.

Yup, it's going to get a better grip once the size is right. I suck at modeling right now so I don't want deal with resizing after the bevel is added.

>>997756
>not calling it a woogala

File: Untitled.png (39KB, 951x456px) Image search: [Google]

39KB, 951x456px

>>997963

>>997963
Are you retarded? Look up a set of brass knuckle dusters - they are. that shape for a number of reasons.
The curved bottom fits in the palm and spreads the impact so you don't break bones. The individual 'knuckles' act as a point of force to break bones.

>>998073
*your bones
the other guy's bones

File: y7e5ese8.jpg (346KB, 891x745px) Image search: [Google]

346KB, 891x745px

>>998073
Are you? I already it's not done. I'm not adding contours until the size is right. I'm basing it on this design I found

File: image.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

These tables.

File: 1435799172653.jpg (49KB, 449x425px) Image search: [Google]

49KB, 449x425px

>>998674
dayum

>>998674
I like the legs, though they don't fit in with the rest of the design. That said, it doesn't look finished, so I'll judge later on.

>>997922
Lovely. What wood did you use for the handle? Ash?

>>998695
this

>>998290
>thank you for purchasing a nignog

File: P3080001.jpg (548KB, 1600x1200px) Image search: [Google]

548KB, 1600x1200px

>>998705
I laminated a section of Hickory- which is a great shock resister on the inside edge and there's a length of African Wenge on the outside edge which has some pretty awesome compression properties. Both are stained black and then I did 5 coats of 2-pack polyurethane over the top, its also got cotton thread around the handle and near the top that I did a coat of epoxy over and sort of bulks it up. Then did the leather bind over the top of that.
Rest of the inlay and counterweight are brass. Head is 5 x layers of 1095 and 6 x layers of 15N20, has a really nice 'ring' to it.

Sort of happy with the finish, think in hindsight I might have done a few things different in looks, but overall really happy how it handles- really swings very nice and quite controllable with 2 hands (its a bit over 3ft long)

>>998674
Dem tables!
Make sure you give us an update when that's stained and polished.

File: tmp_25800-20160525_0015181782689989.jpg (1MB, 2048x1536px) Image search: [Google]

1MB, 2048x1536px

Homemade capacitor charger with voltage control and hysteresis to avoid fast comparator oscillation when the capacitors are fully charged.

I kinda fucked up because the duty cycle is 60% and I can't change it unless I rip some traces, but anyway, works fine enough.

https://www.youtube.com/watch?v=DdIfi3C-AiQ

File: WP_20160519_15_46_59_Pro.jpg (3MB, 3264x1840px) Image search: [Google]

3MB, 3264x1840px

I made that flower pot foundry from the other thread. It turned out breaddy good. Haven't melted anything down yet. I'm still waiting for a crucible to be delivered (I couldn't find any old fire extinguishers).

>>998839

That video made me very nervous

File: WP_20160526_001.jpg (2MB, 3552x2000px) Image search: [Google]

2MB, 3552x2000px

This is the first project that I've made so far, as I'm a complete beginner when it comes to making things.

I don't think I did too bad. I know it's not an original idea, but I was hoping this would get me into eventually making more complex things.

It may not be pretty, but it works, I had fun, and learned stuff.

File: WP_20160526_002.jpg (2MB, 3552x2000px) Image search: [Google]

2MB, 3552x2000px

>>998946

>>997869
>>997866
>>997865
>>997863
pretty neat anon

File: 20151107_165729~2.jpg (1MB, 4128x2322px) Image search: [Google]

1MB, 4128x2322px

>>998946
I also made a fight stick. I was gonna use a Tupperware container but I like working with wood

>>998946
pretty cool
Personally, I think it would look cool in a metal box like >>997869
But its up to you.

>>998946
Not bad. Are you planning on making another case for it?

File: 64d97999-5943-4e8c-aea7-124fedcc442b.jpg (256KB, 960x1280px) Image search: [Google]

256KB, 960x1280px

>>997727
Have you guys seen this kind of PC setup before

File: JanRadde_Turned_1.jpg (3MB, 5184x3456px) Image search: [Google]

3MB, 5184x3456px

Made a thing out of bocte

File: 20151202_215804.jpg (4MB, 5312x2988px) Image search: [Google]

4MB, 5312x2988px

>>999090

File: JanRadde_Project_2_Final_4.gif (2MB, 480x640px) Image search: [Google]

2MB, 480x640px

>>999093
Idk why that one posted sideways rip

>>998899
Nah, if your hands are dry you can touch the capacitors without problems, if you have sweaty hands it could burn you, but it isn't that dangerous.
https://www.youtube.com/watch?v=snk3C4m44SY

>>999050
>>999040
>>999009

I'm wanting to eventually make another one sometime (maybe for the SNES). It might be a while before I start on another, though.

Unfortunately, I've been working with a limited amount of tools. I need to put aside a small budget for more/better tools.

File: 2016-05-27 03.35.34.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

Some titanium (or magnesium idk) rings I made. Someone broke a tool probe at work and the tip was a ruby so I set it in there. Super glue. I know. These is just a prototype.

File: image.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

I made this back when i was in middle school, the wood part at least.

File: cvr91fD.jpg (862KB, 2560x1440px) Image search: [Google]

862KB, 2560x1440px

I made a coffee table

File: IMG_20141002_202854.jpg (554KB, 1944x2592px) Image search: [Google]

554KB, 1944x2592px

I made several shirts.
Inhaling liters of chlorine a fun

>>999711
Neat! I'm gonna try this

>>998889
Ive made the same one. Muffin pans work well to make ingots with

File: steam.gif (151KB, 256x192px) Image search: [Google]

151KB, 256x192px

Made this in high school.

File: 16+-+1[1].jpg (75KB, 675x835px) Image search: [Google]

75KB, 675x835px

>>997727
I made this shield.

>>1000002
Neat

>>999685
Looks insane anon

>>999685
This is what happens when you spend too much time on pinterest.

File: 26gIJTA.gif (382KB, 480x270px) Image search: [Google]

382KB, 480x270px

>>1000198

Please no bully...I had just bought a house and needed a cheap and stylish table...

File: fid.jpg (355KB, 1024x576px) Image search: [Google]

355KB, 1024x576px

I made a fid from a fid-shaped clamp I had laying around.

And then I spliced a rope. The eyelet wasn't tight enough to stay in there, but it helped my form.

>>997731
that's fuckin awesome. ive got an african mask in my bathroom right now, id trade it out for aku aku in a heartbeat.

no idea what the precedent for selling ~copyright shit like that is

>>998290
Do people honestly think cops, a judge, or a DA won't consider these a weapon because they don't look like the brass knuckles on tv?

File: 20160528_172042.jpg (1MB, 3264x1836px) Image search: [Google]

1MB, 3264x1836px

Today I finished my first real project ever, a small wooden box for my duduk (an ancient oboe-like instrument)

Really happy with how everything came out, especially the leather binding and cotton interior

File: 20160528_172054.jpg (1MB, 3264x1836px) Image search: [Google]

1MB, 3264x1836px

>>1000426
the inside

>>999400
badass

File: IMG_0889.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

Wood mosaic inside a camper.

>>998674
Nice work. Really nice job. Glass going underneath?

File: homemade_dildo___by_sarinov-d8ctgw6.jpg (8KB, 285x200px) Image search: [Google]

8KB, 285x200px

>>997727
not proud

>>999093
That's pretty cool. I made a sculpture out of wire in highs school and gave it to a girl. :-(

>>999534
Love the roughness of this.

>>999685
looks good with the rug

>>1000535
Did you turn a UHMW dildo?

>>997727
>paver stone
What's this supposed to be?
Like... do you remove that leaf?
Or what the fuck?
I'm totally confus.

I know what is a paver stone obviously, but what's that on your pic OP?

>>1000316
it looks nice but drop this weeb shit please

>>1000778
>anime triggers me
>better browse 4chan

>>1000783
Fuck off mate, this was discussed a thousand times already. 4chan was based on a nip site, but it had containment boards since forever.

And we still have those, so please, go back to /a/, /mlp/, or /lgbt/.

>>1000791
Well that's too fucking bad.

File: disgusting.jpg (89KB, 651x420px) Image search: [Google]

89KB, 651x420px

>>1000778
DONT BULLY THE WEEB PLS

File: tumblr_inline_mt8izlalTs1s3571h.png (77KB, 500x500px) Image search: [Google]

77KB, 500x500px

>>1000791
>implying /diy isn't the containment board.

>>1000826
Well, not really. I don't remember seeing this stuff offending anyone before /diy/ was made - partly because the volume is so low.

Someone calculated the post volumes of several boards some time ago and the result was that /b/ dominated the site's traffic (duh), followed by /pol/ and /v/ & /vg/. The biggest anime-related board, /a/, was pretty small in comparison and lost to several other non-anime boards. Based on traffic, this site is thus dedicated mainly to inane garbage, general discussions, nazism, racism and video games. Mongolian paintings are just a decoration.

File: foto_no_exif.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

I built a ramp and a board to fit a cat flap in a window so our cats can come and go

File: smile.png (56KB, 184x184px) Image search: [Google]

56KB, 184x184px

>>999685
Nice table, anon.

I havent got any photos but I just made a planter box so I could put some strawberry lants in, two garden benches, and a garden stool

>>998674
I dont believe you

>>998900
Nice!

File: 44274596.jpg (335KB, 1150x1150px) Image search: [Google]

335KB, 1150x1150px

>>1000856
Cute

does my PC count? or is that more /g/?

File: IMG_20160327_175809512.jpg (2MB, 2432x4320px) Image search: [Google]

2MB, 2432x4320px

project 1/5 i found something like it and tweaked it for the tools i had/could afford

File: IMG_20160409_152952.jpg (1MB, 2592x1944px) Image search: [Google]

1MB, 2592x1944px

project 2/5 I had some new tools to play with so i made something I thought I could use and freed up some space in my cabinets

File: IMG_20160417_144424.jpg (976KB, 1944x2592px) Image search: [Google]

976KB, 1944x2592px

Project 3/5 didn't really like how this turned out. I wanted to make 4+ and go wild and make a coffee table out of them but I didn't like how this one looked so I made it a general purpose box for larger tools (sander, jigsaw, angle-grinder etc.)

File: IMG_20160430_142649.jpg (849KB, 1944x1944px) Image search: [Google]

849KB, 1944x1944px

project 4/5 something I finally needed a workstation that doubles as support for my tablesaw. going cheap i built it out of what I had and what was affordable, a good slab of 3/4'' plywood made a table for my workstation and another table for a drill-press and router with a couple 2x4s for support

http://imgur.com/a/AQ1mR

I made this back in December. It looks like crap, but hey, I made it.

File: 9494554791_b86c93ebd7_b.jpg (559KB, 768x1024px) Image search: [Google]

559KB, 768x1024px

5/5 what i'm kind of working on currently. putting together a prototype with scraps/what's cheap since I'm having to make this for a god's honest client as a wedding gift

File: IMG_20150809_164446640.jpg (774KB, 3264x1343px) Image search: [Google]

774KB, 3264x1343px

>>1000984
sup

>>1000998
that can't be comfortable.

>>1000998
Looks cool
For the inner pieces of wood you could probably get away with lighter/thinner timber and more of them.
Plus if you chamfer the edges it'll also stop blowouts/splinters

>>998839
do you have a schematic?

>>1000424

having one of these is just as having a kubotan, which are also legal.

File: image.jpg (544KB, 2048x1536px) Image search: [Google]

544KB, 2048x1536px

>>1000872
What don't you believe?

>>998674
Whatsup with the boxy bits at the ends on the bottom?

>>1000428
Are you going to get a nice piece of HD foam to keep those reed things cosy?

File: 31073728.gif (67KB, 230x230px) Image search: [Google]

67KB, 230x230px

>>1001065
>TFW you discover mortising machines exist

File: IMG_20160530_072619143.jpg (2MB, 2592x1456px) Image search: [Google]

2MB, 2592x1456px

>>1000777
The rhubarb leaf is part of the forming. Here it is striped.

>>1001021
well this is just an example, i'm routing the edges down to make it rounded and using threaded rods/washers/nuts to hold it together. I agree the hard edges and rope that's in this example sucks and probably wouldn't hold very well

>>1001011
nice, I like how high you have it. Honestly i wanted to put mine up higher too but my wife's short so I had to have it more accessible to her. It sucks because everytime I get up from the table and I have one of the long handle pots on the end I usually hit my head on it.

>>1001033
That's what I plan on doing, and running through a threaded rod through them instead of rope to give it more strength

>>1000968
that is like assembling some ikea shit.

File: P_20160226_172930.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>1000532
my god what a pain in the ass time wise that must have been. Looks cool as shit anon, I'm stealing this idea for my 'camper'.

>>1000984
Show a photo of the whole room. This seems like it would make the kitchen feel cluttered.

>>1001081
even better, you can build one youself

>>1001077
I considered it, but I decided against it in the end. If it was a case made for transporting it then I probably would. I might make one of those later. For now this thing just sits in my room.

Also, it's important for the reeds to be able to dry out after playing, and I'm not sure I would want to keep them in a tight environment like that. Definitely something to consider in the future though, thanks for the comment!

File: mask.jpg (71KB, 528x960px) Image search: [Google]

71KB, 528x960px

>>997731
This is the finished mask i made

>>1001281
This is excellent.

File: 3221034278630420160302_043421.jpg (2MB, 1536x2048px) Image search: [Google]

2MB, 1536x2048px

Made these about two years ago out of beats

File: EBwp7Ul.jpg (39KB, 620x827px) Image search: [Google]

39KB, 620x827px

>>1001303
Also made these quite recently out of 11$ headphones and earmuffs

>>1001283
Thanks a lot man!

>>1001303
what do you do with them?
do you put them on and walk with a phone before your eyes?

>>1001303
What is this shit even

>>1001281
I am so jealous. I'm saving the image and will make sure not to forget the concept if I have a chance to recreate it. Could you share bits on how you created it? I'm a complete lurker and amateur.

File: IMG_20160530_204711723.jpg (3MB, 4320x2432px) Image search: [Google]

3MB, 4320x2432px

>>1001196
It's honestly not bad, I have a tiny apartment in new England with two kids. Luckily the landlord owns his own construction company and when told him my idea of making a little shop in my basement storage he was impressed with the idea. He comes to me for basic maintenance around the building and I get a good deal on rent.

>>1001281
That looks really good, anon.

>>1001051
Except its not in several US states and most of Europe.
In California it's a felony weapons charge.

File: 2093487.jpg (544KB, 779x1080px) Image search: [Google]

544KB, 779x1080px

>Bolted a tripod swivel to a ladder

>>1001194
Had to do a double take because at first glance I thought that thing had wings on top of it. Can you make it have wings?

File: DSC01124.jpg (147KB, 480x640px) Image search: [Google]

147KB, 480x640px

getting into making comfiness.

>>1001499
Thanks!
>>1001336
Haha thanks a lot man, i am going to make 3 more, since everyone seems to like them i will make a tutorial on how to make these masks.

I bet this thread will be 404'd by then but i will do my best, if its archived before i finish the tutorial i will create a thread with the mask as pic, and explain everything in detail with pictures.


Thanks everone for your compliments, it means a lot!

I will probably be done with the tutorial this saturday.

>>1001697
awesome!

File: DSC01128.jpg (152KB, 480x640px) Image search: [Google]

152KB, 480x640px

>>1001703
Thanks! Trying to make more stuff more manly but I don't even know if guys would be interested in crocheted bags desu

>>1001705
I would if it is sturdy enough. Maybe if it's made from hemp or linen the hippie crowd would be pleased.

>>1001725
This

File: 20160524_173049_HDR-1.jpg (615KB, 2448x1377px) Image search: [Google]

615KB, 2448x1377px

Hitch

>>1001281
Anyone here who knows if i would get in trouble selling these things?
I bet it is copyrighted, how does this work?

File: Notched Straightedge 1.jpg (283KB, 1264x948px) Image search: [Google]

283KB, 1264x948px

>>997727
I made this notched straight edge (it's for working on fender scale guitars) from some old kitchen counter trim I had laying around, the tools I used were a sharpie, a file and a dremel tool, you can do it without the dremel but it is quicker with it, making this saved me $81.76 (see link to StewMac for full horrific price) and took all of half an hour to make!

http://www.stewmac.com/Luthier_Tools/Tools_by_Job/Tools_for_Leveling/Notched_Straightedge.html

>>1001856
Is it an exact copy of a mask already in use by a company or person?, if so then provide a link so we can judge.

A direct copy of a company logo or emblem will probably get you in hot water but a generic mask sculpture will not unless as stated it is a VERY close copy of one already in use.

>>1001889
Please ignore my last post, I just found it online and I say you'd be in big trouble if you tried to sell these, you might be able to give them away as gifts or maybe trade them for other good's rather than money but you will never make a business out of them.

Nice work by the way anon!

>>999066
Nice posters, how's high school?

>>1001856
You could probably get away with selling them anywhere but on the internet. At least, for a good while, before anyone connected to Sony, Naughty Dog, or Crash Bandicoot stumbled across it. Then they'd probably just hit you with a cease-and-desist letter rather than sue you, because the suit wouldn't be worth the cost to them. Fucking awesome job, by the way!

>>1001829
Not something you want to make, I've done it to temporarily jerry rig something, but go to a junkyard and pull one off a car. It'll cost you 35$ and no liabilities. Some shit I don't bother making myself.

File: 20160529_221256-min.jpg (1MB, 2984x5312px) Image search: [Google]

1MB, 2984x5312px

First time working with wood

File: 20160529_221253-min.jpg (1MB, 2984x5312px) Image search: [Google]

1MB, 2984x5312px

>>1002134
Otherside

>>1000791
>anime containment board
>on 4chan
This will never cease to amuse me. Enjoy your stay here desu

>>998674
>>1001065
>poplar
>2016
Please paint it.

File: top.png (47KB, 1134x970px) Image search: [Google]

47KB, 1134x970px

>>1001040
Being the idiot I am I accidentally shift+deleted the folder in which I had all the Eagle files.
I have these two screen captures though.

I'm now running a recovery software to see if I can bring them back.

>>1002222
I forgot to add, keep in mind the duty cycle of that circuit is 60%, and it should be run at less than 50%, so the 555 or the transistor clusterfuck part will need to be modified.

>>1002143
I just build what the client wants, man.

>>1002394
I sometimes forget people actually get paid to do this stuff... I don't mean that in an insulting way, I honestly do just forget.
Also >>1002222
Nice fucking dub-quads.

File: image.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

>>998674
They're not sealed yet.

File: tapatalk_1464890949895.jpg (123KB, 960x576px) Image search: [Google]

123KB, 960x576px

Made an inverted trike from scratch.
WIP. Those body panels are a placeholder, mocknup that will definitely change.

>>997922
nice axe... stupid name

>>1002839
Thats really neat.
Whats the top speed on it?

File: CreamPitcher-Copper+Tourmaline.jpg (1MB, 1632x1224px) Image search: [Google]

1MB, 1632x1224px

A few things.

>>1003030
>>1003027
>>1003026
Dude, NICE work!

>>1003038
Thanks. Two community college semesters of wheel work under the belt so far. Had to set up a separate cabinet just for thrown cups and mugs in my place because I've made so much shit.

>>1003026
>>1003027
>>1003030
Good job, I say this also as an abject failure of a potter, so take that for what its worth.

>>998839
>2:04 arm burn

>>1001144
Maybe you should fill it up with something so you get a flat surface -- i'm thinking glass maybe
either way - good idea

>>1002926
About 30 mph.
Lots of modifications I have in mind now that I have more free time will fix that.

File: IMG_20160527_002520.jpg (91KB, 1280x960px) Image search: [Google]

91KB, 1280x960px

Still needs some lacquer

>>1000002
Hagrid is that you?

>>1003176
Ergonomics are often the reason given for using a mechanical keyboard, yet the keyboard you've made entirely denies those principles. You can talk about tactile benefits all you want, but when you have shit for wrist support, that all gets thrown out the window. Your keyboard becomes an abomination of form over function.

File: 1464635822103.jpg (301KB, 800x2000px) Image search: [Google]

301KB, 800x2000px

I made this subkick mic thingy. It wasn't rocket surgery, I just sourced the components and put it all together to look nice and function. It sounds triffic.

File: Mobius Flail.jpg (3MB, 4608x3456px) Image search: [Google]

3MB, 4608x3456px

Chain mail flail

File: DSCN9082.jpg (4MB, 4608x3456px) Image search: [Google]

4MB, 4608x3456px

>>1003251
Chain mail dwarf mask

File: 2.jpg (4MB, 4608x3456px) Image search: [Google]

4MB, 4608x3456px

>>1003252
Chain mail book

>>1003253
Did they ever find out what this meant on /x/ or did you really just make it meaning nothing and post it there?

File: mailian.png (15KB, 720x268px) Image search: [Google]

15KB, 720x268px

>>1003255
Someone from /sci/ found the forum post about it with the solution.

http://www.mailleartisans.org/board/viewtopic.php?t=19259&postdays=0&postorder=asc&start=15#240330

>>997731
Attach some magnets to it to make it float like them floating globes

File: 1464988221601799379602.jpg (4MB, 3024x5376px) Image search: [Google]

4MB, 3024x5376px

Its more of arts and crafts but im making a silk card box for my sisters open house, to match the caps and gowns

File: P1060536.jpg (2MB, 4592x3448px) Image search: [Google]

2MB, 4592x3448px

>>1003199
>Ergonomics are often the reason given for using a mechanical keyboard
I can tell you that whoever claims that mechanical keyboards are "more ergonomic" doesn't know shit about what they're saying.

Not to say that there aren't some mechanical keyboard designs that aren't ergonomic (see the ergodox or some keyboards from matias as prime examples), but you'd still get better results by using the same form with a membrane, since mechanical keyboards are by design tall as shit.

Mechanical keyboards are a pleasure to use, they're far more durable than traditional membrane keyboards and also highly modifiable, but whoever claims that they are more ergonomic than a flatter membrane keyboard is plain out wrong.

>>1003253
wheres the chain mail chain mail?

File: E4-1 Unbalanced.jpg (3MB, 4608x3456px) Image search: [Google]

3MB, 4608x3456px

>>1003343
anywhere you want it to be.

>>1003285
>let me just put my multitool right in the picture

>>998290
They look like butt plugs m8

File: 348579874.jpg (2MB, 1620x1080px) Image search: [Google]

2MB, 1620x1080px

I needed a book light in a pinch

battery pack
clip from chink torch
those little single board usb lights
Made a usb cable with chink jacks and chink paracord
cardboard eye shield

File: 1465016863545-551596035.jpg (2MB, 3984x2988px) Image search: [Google]

2MB, 3984x2988px

>>1000826
I don't know if crocheting/amigurumis count as DIY, since all you're doing is repurposing balls of yarn.
But here we are. Kyuubey and a Tachikoma

File: image.jpg (1MB, 4032x3024px) Image search: [Google]

1MB, 4032x3024px

Im in the process of making a bottle cap catcher with a bottle opener, but I had problems with staining it today.

I left it on for about 3 minutes like the instructions said but when i wiped the wood down to remove the excess stain some of the stain came off and you can see the original wood color, whats going on? Is it that I put too much pressure on the wood when I wiped it down or the kind of rag i used to wipe it down. I used the blue shop towels that you get at auto zone.

Image not related to the post but related to the thread

>>1003446
That's actually pretty good.

File: ZKN2.jpg (379KB, 1600x1902px) Image search: [Google]

379KB, 1600x1902px

>>1003446
Kyubey turned out great, love it

Made a stand for a kitchen knife out of some leftover bits I had from doing the handle- except the Hickory which I had from another project
First time heat-bending timber and I can't say I'm great at it, but learned a fair bit from doing it

>>1001856
>>1001889
I have seen where those knife shows, in order to skirt trademark laws, called their product "genuine imitation replica". Check that phraseology out and you might be in the clear

File: 1328325295287.jpg (238KB, 993x1105px) Image search: [Google]

238KB, 993x1105px

>>1003446
They count.

>>999066
That blue light will forcibly sodomize your sleep cycle.

File: 4chanbanner1.jpg (34KB, 300x100px) Image search: [Google]

34KB, 300x100px

>>1000791
Kindly mcfucking killyourself please.

>>1001705
Can you make one from Kevlar please?

>>1001530
Damn. I'm not buying another tripod again.

File: DSCN3949b.jpg (3MB, 3072x4600px) Image search: [Google]

3MB, 3072x4600px

I made this today. I totally amazed at how well it performed. All it cost was a few rivets and stove pipe tape. The rest was left over scrap or actual trash. The amount of fuel you use (twigs) is ridiculously low.

>>1001856
>>1002115
Most of the time those are okay to make and sell because, "art". Take a look at stuff that is sold at conventions and you get the idea.

File: New Shed3.jpg (682KB, 1632x1224px) Image search: [Google]

682KB, 1632x1224px

My shed and nearly everything in it

>>997962
Why didn't you just buy a small case you could put them inside? Or make I guess if you have a 3D printer

>>1003801
Nice, I got on a real wood stove kick a while back, did some hardcore research into it. Ended up building a top lit updraft stove (well rather several until I got the ratios and everything correct), but those rocket stove types are pretty neat too.

>>1003820
>top lit updraft stove

I know the forced air gassifier stoves burn the cleanest of any biomass stove. Rocket stove comes in second. I've been thinking about making one of those small forced air gassifiers out of tin cans. They are very compact. But, I need them for camping and forced air requires electric. Non-forced air TLUDs normally use a lot of fuel packed into them and I only need a little bit of fire that burns up all the fuel by the time I'm done cooking. That gives it a quick cool down time too so I can hit the trail agian.

File: what et doo.jpg (84KB, 960x449px) Image search: [Google]

84KB, 960x449px

Wasn't really worth the time put into it, but it makes for a good decoration on my wall.

>>1000791
Please relocate any and all insecurities to /trash/ ASAP.

http://imgur.com/pPl4v1m

First knife i made stock removal. I'd post a more recent one but im an idiot and i started a shitload more knives and havent finished any of them yet

No doubt a bunch of issues on this, but it works fine for what i need. Its just a simple chefs knife. 1095 carbon steel blade.

>>1003911
1095's a nice metal, if you're doing a lot of blades make yourself up a jig like this one-
https://www.youtube.com/watch?v=r9iNDRwwBQQ

File: file.png (173KB, 580x343px) Image search: [Google]

173KB, 580x343px

>>1003944
im a lazy ass so i just use a bench sander
I didn't do enough research on my sander though, found out its for wood. It has metal sticking out on either side of the sanding belt so it makes it a huge pain in the dick to sand a lot of stuff right. It even restricts my bevels on most knives.

File: image.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

I made this quilt for a babby cousin.

>>1004087
Quilts are severely underrated.
I don't know how I managed to survive winters before I had mine.

>>1004087
>>1004088
Im a bit of a pleb, whats the difference between a quilt and any other type of blanket?

>>1003888
I'm interested in building a guitar too but I don't know how much of the expensive specialty equipment I can get away with not using. What tools did you use for that?

>>1004089
let me google that for you.

>>1004102
LeL

File: 13401445_1097797136923887_894768578_n.jpg (47KB, 720x960px) Image search: [Google]

47KB, 720x960px

made a dream catcher.

>>1000535
http://sarinov.deviantart.com/

If this really is your work, then I found your account

>>1004100
Repairing guitars is what got me into woodworking. I would suggest start with one aspect, learn that, then another aspect. There's plenty of sites that sell kits with all the parts but you can avoid the more complicated accurate type things like cutting fret slots, refretting a neck etc that also take specialty tools.

Check stewmac.com

File: kevlar.jpg (10KB, 225x225px) Image search: [Google]

10KB, 225x225px

>>1003663
I probably could, a 1mx1m piece of Kevlar is around $50 here. I'd probably have to buy special thread but it looks like I could use my sewing machine and a jean needle. Looks like it only comes in 1 color which is a yellow. I'd probably charge another 50 for the time and effort and depending on the weight of the finished product it could be another $20 to post.
>pic related is the Kevlar

>>1004087
That is gorgeous. Looks like a lot of love went into that.

File: DSC00982.jpg (158KB, 480x640px) Image search: [Google]

158KB, 480x640px

>>1004285
>>1003663
anyway here's my shop, feel free to drop me a message. In the meantime I'll do some more research and see what the go is on building something like this.

https://www.etsy.com/nz/shop/WarmaWearz
>no doxx pls

File: Nicholson-Maintenance-Hand-File-Kit.jpg (34KB, 400x358px) Image search: [Google]

34KB, 400x358px

>>1004072
At least you can do handles and stuff on it, the longer belt sanders with a slightly narrower profile are what most people recommend with a sander. Better wear, less heat and come in a fairly wide variety of grits.
Sort of have a love-hate with them.
>I love they do a lot of work so damn quick
>I hate that they sometimes fuck shit up beyond repair!

Mainly I like files simply because I can 'see' exactly where the materials being removed and mashing it up against a belt is a guesswork thing sometimes, but that said the belt/linisher has its place especially for the finer grinds and polishing

>>1001250
put some cotton & silk at least

>>1001281
OOH-OGLIBOOLGIO-BO

>>999685
god i fucking hate pinterest so much

>>1004493
Why?

File: index.jpg (36KB, 844x633px) Image search: [Google]

36KB, 844x633px

I made a puzzle box

File: IMG_20160606_204432.jpg (2MB, 2448x3264px) Image search: [Google]

2MB, 2448x3264px

Needed a light for reading in bed lol

>>997731
that is awesome

File: 20160606_213539.jpg (2MB, 4128x2322px) Image search: [Google]

2MB, 4128x2322px

headphones

File: IMG_20120816_014621.jpg (324KB, 1600x1200px) Image search: [Google]

324KB, 1600x1200px

>>997727

File: IMG_20120816_014707.jpg (500KB, 1600x1200px) Image search: [Google]

500KB, 1600x1200px

>>1004871
first woodworking project.

File: IMG_20120816_014406.jpg (435KB, 1600x1200px) Image search: [Google]

435KB, 1600x1200px

>>1004872

File: 2016-02-04 (2).jpg (72KB, 634x845px) Image search: [Google]

72KB, 634x845px

>>1004873
2nd project.

sorry about the low res, dont have the origionals off this laptop, had to pull them off text messages.

File: 2016-02-04.jpg (52KB, 634x476px) Image search: [Google]

52KB, 634x476px

>>1004874

File: 2016-02-04 (1).jpg (54KB, 634x476px) Image search: [Google]

54KB, 634x476px

>>1004876

File: 2016-02-04 (3).jpg (57KB, 634x476px) Image search: [Google]

57KB, 634x476px

>>1004877
the images done to the finish any justice

>>1004878
working on a jet engine now. not really all that many pictures as of yet. flame tube lights up. just need to do oil system and turbine hookup

>>998674
>>1001065
>>1002838

How the hell did you get the carving on the legs done?

CNC?

>>1002134
>>1002135

you made a stick?

File: image.jpg (620KB, 2048x1365px) Image search: [Google]

620KB, 2048x1365px

Built a fully operational turret from scratch.

Specifically engineered to protecting the remaining humans against house cats.

File: 20140929_185522.jpg (1009KB, 1836x3264px) Image search: [Google]

1009KB, 1836x3264px

>>1003176
That's cool anon ! The case is a bit big for my taste, but if it works for you then congrats !
I also want to build my mech on of the days. I have very limited access to a laser cutter and maybe I can have my dad CNC me some aluminium case...

Also I don't have anything diy to show that's recent, so I'm gonna shamelessly repost my arcade cabinet from 2 years ago, sorry !

File: Custom videogame cabinet.jpg (829KB, 2048x1536px) Image search: [Google]

829KB, 2048x1536px

made this from a old locker front

File: 20160524_161505~01.jpg (430KB, 1080x1920px) Image search: [Google]

430KB, 1080x1920px

I made this winebox for a friend's wedding, cherry and spalted maple

>>1004933
Really interesting bit of maple, I like how the heartwood is still there in a semicircle. Nice job on the joints too

File: 12341524_925607827492735_4572535998976701705_n.jpg (80KB, 960x720px) Image search: [Google]

80KB, 960x720px

this nixie clock

>>1004878
Looks monolithic very sexy

>>1003251
>>1003252
>>1003253
send these pictures to 3 freinds b4 midnight or uncle bob will visit you

File: 20160605_052911.jpg (802KB, 2048x1152px) Image search: [Google]

802KB, 2048x1152px

>>1004876
teach me your ways

File: 20160605_052859.jpg (899KB, 2048x1152px) Image search: [Google]

899KB, 2048x1152px

>>1004967

>>1001303
ghetto VR set up?

>>1004933
Oh I like that! So clean.

Dubs WITNESSED

File: IMG_2872.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

will post some decorations iv done for my apartment, comic book decopage table first

File: IMG_2879.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>1005322

File: IMG_2880.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>1005323
sorry for sideways pictures guys

File: IMG_2881.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>1005324

File: IMG_2921.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>1005326
Tore up a bunch of cd's and made this poster

>>1005322
>>1005323
>>1005324
>>1005326
Nigga just right click on it and press one of the rotate image buttons

>>1005341
It's an iPhone thing.
Instead of rotating the jpg it saves meta data in it that says how much to rotate it.

Then 4chan strips the metadata

>>1005344
>iPhone
I'm so sorry anon

>>1003026
>>1003027
>>1003030

v.nice pots anon

>>1003806
I had a small tin to put them in but I like the wrap a little bit more

>>1000424
No clue. I'm doing it because it looks cool, not for carrying around. But perhaps it skirts some particular definition of brass/plastic knuckles.

>>1000035
Is it for style or are you going to whack it to death with the axe?

>>1005327
looks good. Good luck if you ever have to move it though

File: 23-02-2016 18h19 - 0001.jpg (300KB, 1000x1400px) Image search: [Google]

300KB, 1000x1400px

Made this, damn all my production stuff took a full desk, now i can travel around my flat with it.

>>1005415
thanks man, an yea gots to be careful lol

>>1005425
Reminds me of the Y-Cube that was made back then on AOTS(when G4 was still a network).

File: IMG_20160608_182603.jpg (135KB, 720x1119px) Image search: [Google]

135KB, 720x1119px

>>1005425
I want to go to a party like this.

>>1004786
10/10

Good work, keep it up anon

>>1003251
>>1003252
>>1003253
neato

>>1003498
did you make the damascus yourself?

>>1004933
if you rub glue into the joints then go over it with sandpaper the gaps go away

>>1000982
So much room for activities!

>>1005828
Yeah about 2-3 years ago now a friend had a garage, one slow weekend instead of mucking around on cars we made a dodgy forge and threw a few billets together out of 1095 and 15N20.
>Lot of smashing red hot stuff with a sledge hammer for hours on end and other various primal shrieking
He does SCA stuff and wanted a some for a sword and dagger, I made an axe and a couple of smaller blades out of the remainder. It was fun, probably wouldn't do it again as its a fucking shitload of work!

File: IMG_20160608_172024337_HDR[1].jpg (2MB, 2448x3264px) Image search: [Google]

2MB, 2448x3264px

I am the guy with the blue garage.

There was no access to the attic in said garage, so I made one.

(1/4)

File: IMG_20160608_185032125[1].jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>1005908
(2/4)

File: IMG_20160608_191314302[1].jpg (1MB, 2448x3264px) Image search: [Google]

1MB, 2448x3264px

>>1005909
(3/4)

>>1005908
Just reminded me that we have an attic in our garage. Gremlins cursed our garage with shitloads of problems so I am not as venturous as you.

File: IMG_20160608_213507147.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

>>1005911
(4/4)

File: IMG_20160608_203344977[1].jpg (2MB, 2448x3264px) Image search: [Google]

2MB, 2448x3264px

>>1005912
Hence why I made the access. My neighbour has birds and vermin very obviously coming in and out of his attic, and I want to prevent that.

Also, for checking ventilation and structure.

>>1004089
Sorry for such a late response, I'm not a /diy/ native.

A quilt has three layers: the top (fancy patchwork goes here), the batting (works like insulation), and the backing.
The three are connected by quilting, which is sewing through all three layers, and a binding, which goes on the edge to prevent fraying.

Regular blankets are typically one, thick layer.

https://youtu.be/8wrUTwymn08

This video explains more about the construction of a proper quilt.

File: Photo0051.jpg (214KB, 1600x1200px) Image search: [Google]

214KB, 1600x1200px

Had some problems with the sun being an intrusive motherfucker when I was busy shitposting but I still want some natural light to come in so I made these to spread the light a bit so I don't go blind.

Was a bit of a sloppy job but with only a jigsaw, some chisels and a stapler, I got the job done.

>>1004940
waw i can't make it but i buy immediately

>>1003199
Wrist support is not ergonomic, there is no possible wrist support that will not put pressure on your carpal tunnel. Every typing expert ever will tell you that when typing you should at most rest your elbows, never your wrists.

The only things I've made recently have been storage units for my garage made of bits of pallets - as such, they look like shit.

>>1003199
No idiot, ease of touch typing, superior feeling and quality of switches is. Light, easily actuated keys also let you dance across the keyboard without needing full support for your hands.

"Ergonomics" in keyboards is pure compensation for bad habits. It's a while different philosophy, both of design and use.

>>1006653
I like it

File: before.jpg (3MB, 2592x1952px) Image search: [Google]

3MB, 2592x1952px

Stone carver here.
1/2 cleaning up cracked material

File: after.jpg (3MB, 3000x1993px) Image search: [Google]

3MB, 3000x1993px

>>1007225
2/2 Finished situation. Hand carved limestone, Sorry for not posting actual work pics.

File: CIMG0356[1].jpg (189KB, 1600x1200px) Image search: [Google]

189KB, 1600x1200px

Been surprisingly busy lately. Made a airbrush cleaning jar with tutorial. Better yet you only need 3 hand tools to make one.

http://jokenkosto.blogspot.fi/2016/06/cheap-and-fast-airbrush-cleaning-pot.html if you are interrested about making one.

File: photo_2015-11-13_23-58-52[1].jpg (83KB, 720x1280px) Image search: [Google]

83KB, 720x1280px

>>1007229
Also a while ago i made adjustable power supply for myself based on tuxgraphics power supply.

30V 2A and portable design.

File: CIMG0368.jpg (2MB, 4000x3000px) Image search: [Google]

2MB, 4000x3000px

>>1007230
And password keeper for myself. Because you want to use secure passwords but who can remember something thats 24characters long. So i have now passwords saved in the device and i can get them with couple clicks.

So far been using it every day. Granted it's not as secure as possible but way better than having your passwords on a paper or text document on computer/phone.

Passwords themselves are not shown on the device screen and the text for each password can be customized to show what ever you want. Email, Computer, Laptop, Game whatever you want.

Also the device is protected by 4 number pin. Later i will make some kind of lockout method after x amount of tries and even deleting the passwords from the device after enough wrong tries.

Here is demo video also:
https://www.youtube.com/watch?v=IY5LAmCJ1NU

File: CIMG0379.jpg (2MB, 4000x3000px) Image search: [Google]

2MB, 4000x3000px

>>1007236
And case for it. Made out of acryllic.

Dimensions 48x34x16mm or 1.87x1.32x0.62inc

>>1001499
>every state is as shitty as commiefornia

yeah no

>>999102

Thanks for that video. I haven't laughed so hard at a screen in a while.

Just as well he's electrically resistant or that might have ended up being snuff!

>>1000424

On a keyring it looks harmless enough.

I think you'd have to point it out to most cops and all judges.

>>1007236
Actually it's way less secure than storing your passwords in a document on a phone, because your phone uses encryption hardware that's been designed by experts and rigorously tested, and your device does not.

>>1007370
>>1007236
In addition, a phone using Google Authenticator never releases the password to anything anywhere ever, and instead generates ephemeral keys that are only valid for thirty seconds.

Authenticator is an open standard, and you can use it with any decent online service. You can also use it with PAM to secure your Unix machines.

File: c8be7f806cc901301d50001dd8b71c47[1].gif (93KB, 900x286px) Image search: [Google]

93KB, 900x286px

>>1007370
>>1007372

Ye, also not everybody people use android/apple devices. Not everybody use pin/shape code on their devices

Not saying it's secure. Ofc if somebody wanted in it they would get in, there is also security issues with services and devices manufactured by big companies.

Also while you have your passwords on mobile phone screen while you write them, people could still peek your password.

Not any means secure on:
-Hardware side
-Military standard
-Industry standard

But much better than staring at the list of passwords you store under your keyboard or on your phone and writing keys manually. Also much safer than using same password on every service.

>>1004892
what exactly am i looking at and why are some of those bent?

>>1007228
very nice.

>>1007376
Rubbish.

I can steal your doohickey, and I've stolen all your passwords. It literally just gives them to me.

You steal my phone, and you got nothin: you can't get in without my finger, and I've wiped it remotely anyway.

>>1007527
Edgyptian detected

File: 20160219_052822.jpg (4MB, 5312x2988px) Image search: [Google]

4MB, 5312x2988px

I made these rails. Pro tip, I'm a fabricator.

File: 20150515_094252.jpg (4MB, 5312x2988px) Image search: [Google]

4MB, 5312x2988px

>>1007556
Here's an aluminum gate I fabbed, I can dump more stuff, but it's mostly structural steel and that gets boring fast.

>>1000998
Saw those chairs on American Grit! Bad ass!

>>1007557
I guess uniform welds isn't a big thing for you.

>>1007536
So your philosophy is "build your threat model by addressing obscure threats and pretending simple and obvious threats don't exist"?

- >>1007236 leaves his device unattended for 60 seconds
- some guy plugs it into his laptop, or his OTG phone, and presses all the buttons
- some guy has now stolen all >>1007236's passwords, and >>1007236 doesn't even know

Adding OTP to his accounts and devices (it's supported by Mac, Windows, Linux, and every decent online service) would have taken less time, cost no money, and (instead of introducing brand-new vulnerabilities) provided protection from the kind of attacks that actually happen.

>>1004930
Looks dope, where the hell did you find the locker?

>>1003944

I just use an angle iron with a hole tapped for a bolt on one side. I can adjust the angle of the bevel radically with a turn or two and I just use a pair of molegrips/locking pliers to hold the blade on while I slide it along the table of the grinder.

Essentially free, works well, you can flip the blade over in seconds and it provides a heatsink so you need to dunk the blade less often.

Top tip is use ceramic belts, knock the edges off the bar with an old belt, then bang on a crispy new one for the actual material removal. Cuts faster and cooler than Aluminium Oxide belts.

If you can afford them and you can source them for your grinder, buy some trizact belts to reduce the amount of handfinishing you need to do.

>>1004570

More pics please!

>>1004940

That is purty. I'd probably go with a metal base for the more industrial look myself though.

>>1007228

You've done a beautiful job there. More master mason than stone chisel-er!

>>998900
Wow these are lovely

>>1005914
2spooky

File: 08062016194.jpg (244KB, 2048x1536px) Image search: [Google]

244KB, 2048x1536px

I made a condenser for a small column still.

It was surprisingly simple, as the copper pipe was already annealed. The only machining I had to do was drill a hole in the zinc bucket.

Good times ensued.

>>1008053
>garden hose for hot ethanol
Uhhh... No funny tastes?

>>1008061
Funny enough, no. I had the same concerns as you and thought it might give something extra to the distillate.

I am going to the hardware store tomorrow and will get some food grade pipe to replace the garden hose anyway.

>>1007979
The gremlins are real, bro.

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

Built this thing for testing high voltage breaker trip circuits for work. In hind sight, fitting it into an ammo can was a terrible choice.

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>1008323
It pretty much involved taking all of the contact decks apart and rebuilding them inside the can.

File: 1465876673694-247029339.jpg (3MB, 3024x5376px) Image search: [Google]

3MB, 3024x5376px

First batch of board wax, made from some local beeswax and a shitton of sap i harvested

File: image.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

If you make this with 4-pole, the mic/volume controls don't work, btw.

>>997922
nigga is that damascus?

>>1008345

What kind of sap works well? And what makes the mixture better than straight beeswax?

>>997962
why not buy pice of plexi or random plasic and cut it ? its like the most retardet thing i saw this month

>>1008628
I used white pine because it's what I had. The sap was just hanging of the trees in giant rocks. It makes the wax a little tackier and easier to grip

>>997962
Is this just like one of those things you do because you've already spent tons of cash on a 3D printer and need to justify it? Or do you not know that Dremels exist?

File: 99060835.jpg (84KB, 820x762px) Image search: [Google]

84KB, 820x762px

>>1009899
>Dremel