I just finished restring and leaning this Tektroninx 502A, Im still waiting for 3 tubes that it has missing before I can turn it on for the first time after cleaning it,before it just made a dot, so the HV was there and it gaved some life but had missing 3 tubes and a transistor, now I dont think I will found a identical transistor so I will have to substitute it probably ,but its in the power supply so I ques it shouldn't be that complex
the missing transistor is a 2n214, with wat could I substitute it ??
Im planing on using this scope on vintage tube amp buiilds and stuff ...
another pic
>>985822
Full time amp tech here.
NTE103A transistor will do the job.
https://www.tubesandmore.com for uncommon nos tubes
If you're building amps, you wont really have much occasion to use it. I only have to fire up my scope to track down parasitic oscillations. Do the filter caps while you're in there replacing the transistor. Cool piece of equipment you have there.
I am repairing the crt tube, I mean the socket is lose so I removed it and there were 3 broken pins on it, any idea how to re-attach them back ?
>>985822
>Tektroninx 502A
Fuckin beautiful anon.
Good speed.
>>985923
Solder maybe?
Can I use superglue to glue the crt bese back on ?
how heat resistent is superglue, should I care ,how hot does a crt in one of these get ?
>>986269
use a thin bead of non acid RTV silicone that can handle temps up to about 350° f