hello /diy/ i have old dr martens boots and i want to do something

>>941759
OP here, forgot to mention (just in case it isn't obvious from the pic)- i want to remove leather from steel caps

>>941759
Probably not a good idea for many reasons but if you must just cut the leather and then add some superglue or something to the edges.

Why would you even need to ask this here

>>941759
Just use a razor blade and some polish
Should work OK

>>941762
why it isn't a good idea?
>>941768
if i want to cut only a small hole, like on the left pic, will it still be water resistant or do i need to use some kind of impregnation or glue?

>>942337
You need a glue to seal the ring of gap of the hole meeting the metal, it is more of a filling job than sealing because the ring should ideally touch the metal without gap, so superglue will be fine

>>942346
thanks. do you know maybe is the leather glued to the metal or not? because right now it doesn't look like it's not

>>942357
Welder here. I've worn through the toes of boots at work. The leather is (at least in my experience) glued to the steel, but the glue will not withstand the wear and peeling of an exposed edge for long. Best secure the edge with something sturdy. And the steel will not be very shiny when you expose it. There will probably be an anti-corrosion coating and an as-formed rough surface under that. Polishing steel to a clean outer edge is tricky. You could try peeling the leather back, polishing, then reattaching it. Alternately, you could temporarily secure a metal ring along the border you want, then polish up to it. And the toes are carbon steel, so they will need rust protection if they are to stay shiny.

>>941760
Are you retarded? It's going to rust BAD unless you cerkote or duracoat it.

>>942458
thank you for your input. probably will not do that because of facts presened
>>942458
this isn't /b/, so there's no need in calling someone a retard. i came here to ask advice because i know nothing about this topic, how the hell should i know do they rust or not

>>942512
first reply was ment for >>942371

>>941759
>>>cobbler

>>941759
If you plan on using these boots in any kind of worksite you'll firstly be laughed at for being very silly and then you'll be kicked off of site because you aren't particularly allowed to have exposed metal on the front of your boot.

And what the other guy was saying about rust, You really should feel a bit stupid for not knowing the STEEL in STEEL capped boots will runs when exposed to the atmosphere.

I don't know if this is some kind of fashion thing but if you're going to ruin a good pair of boots I'm not going to help you do that.

>>942512
May not be /b but it is still 4chan.


You faggot

I wore thru the tips in my red wings. The steel didn't rust for two reasons. They put an anti rust coating on it (otherwise it would rust in the leather) and I kept wearing and using them so rust couldn't form.

OP however is some skinhead degenerate.

>>944093
>good pair of boots
>doc martens after 1980
>good boots
Yeah nah.

This is so gay. Steel toes are for working men in an industrial field. In fact, worn out boots that have steel exposed is a no go due to possible sparking. I work in explosive gasses environments. If I saw those boots I would fill em up with ben gay and wait for you.

>>944109
They didnt start being garbage until about 2005 when they changed up all their lines, started selling a bunch of chinese ones. Their sales plummeted and they needed to entice people to buy them, a sharp decrease in price.

I bought a pair when they used to cost almost 200$ in 90s money.

I think what OP is doing is dumb.

>buy second hand steel toe boots
>cut them open
>remove steel toe
>Polish to high shine
>glue to the top of your boots

You now have the black pair of boots in OP

>>942512
Because steel rusts you dumb fuck. You are asking for rusty metal and wet toes

File: image.png (81KB, 339x337px) Image search: [Google]

81KB, 339x337px

>>941759

File: a14.jpg (209KB, 917x720px) Image search: [Google]

209KB, 917x720px

>2016
>wearing doc martens