I want to fix a computer chair floor protector in place, to prevent it from moving all the time.
Weld it with an Oxy-Acetylene welder
gaffer tape.
Nail 'er down
shelf liner
>>1187294
3M VHB.
On carpet?
glue strips of 40 grit sand paper (emery cloth) around the perimeter
or use anti-skid-step-tread tape. (it looks like sandpaper with an adhesive backing.
ON Smooth stuff?
non-foam double sided tape
contact adhesive glue
>>1187542
Won't work. The pile lays in the same direction every time, and has a ratcheting effect. It will slowly move in that direction as it gets traffic (probably what OP's complaining about).
>>1187324
Believe it or not this will work, so long as its on a wood floor. Is also ugly.
>>1187315
Probably your best bet if it's free sitting, but if possible place it so a desk or something else very heavy is sitting on it along at least one side. This will be enough to negate the carpet from pulling it.
T: Carpet layer.
>>1187294
magnets
Carpet? Stick velcro on the bottom.
Tiles or vinyl? Glue some grippy rubber.
why don't you just get rubber wheels for your chair?
>>1187294
they sell rubbery strips specifically for keeping carpets from moving around on hard wood. don't know the name but get that
>>1187937
direct translation from my language is "unslipper"
>>1187970
but a more proper translation could be anti slip mat/pad
>>1187294
Just take the wheels out.
>>1187294
Glue carpet tack strips to the bottom of the floor protector, spikes down.
>>1187294
a rug and remove the wheels.
Take the casters off, or replace the casters with something that doesn't scrape the floor. I would try omnidirectional wheels and see how that goes.