So my computer chair arm busted the other day, and I was thinking of a way to repair it. Do you guys think taking the arm off and using the baking soda and super glue trick would work? Other thoughts are using bondo on it or something after filling it with some sort of foam to seal the break. I'm not sure what to do.
pic related its pretty much the chair. it broke at the very bottom left part of the arm where it connects the back.
anyone?
A metal piece and some screws maybe.
A closeup pic of the break would be helpful
>>1145379
yeah, this
a plate and some bolts (at least 2 on each broken side)
that plastic will never have anything close to its original strength using glue
>>1145344
something like this maybe?
https://mobileimages.lowes.com/product/converted/053538/053538606015.jpg
>>1145344
Stop being fat.
t. Fat guy that breaks furniture.
>>1145344
>>1145379 this and
>>1145398
>>1145344
be more specific about the break
did the arm break in half or did a mounting point break or what?
cyanoacrylate has high tensile but low shear strength. it is also not flexible. it is a poor choice for this repair. if its plastic, get some cheap plastic epoxy and glue it up.you could reinforce with fiber and more epoxy but it will be uggo
gl
I have some pretty nice pneumatic stools in my shop. A couple years ago they all started breaking. I started noticing soon after how often people put their broken office chairs out on the curb. Every other week I snag one and break it down, salvaging the universal gas cylinders, bearings and retaining clips. My shop stools are gonna last forever now. Funny how people throw away $30 in office chair parts every time it "wears out" or whatever.