Any help? Trying to replace a door knob and the plate has no screws holding the plate on, but the plate does not come off?
>>1133900
12ga breeching rounds, if you don't have them call in a man with a gun threatening suicide to 911.
try to get something thin under the edge and pry it up
if it's your door, go to town on it till something breaks
Did you try the other side?
v https://www.youtube.com/watch?v=QTNsHgsUstw
can you get a better picture of the plate?
it looks like it has rivets holding it on, if so break the rivets.
it also looks like it has a place to slide something under
shouldn't that plate screw on/off the main shaft?
>>1133914
>Did you try the other side?
This
The screws are under the cover plate on the other side.
Screwdriver to push clip and remove knob
Plate pops off and slide off shaft to gain access to screws.
>>1133923
>it has rivets holding it on
The rivets are holding the long bolt/standoff that the screws on the other side fit into.
>>1134079
>long bolt/standoff
I'm retarded *long nut / standoff
>>1134079
drill the rivets on that side, and they should slide out with the screws from the other side?
Fuck's sake guys...
Op, there are 2 screws in the side where it latches holding u up...
>>1134801
>drill the rivets on that side,
Why not go to the other side and remove the screws?