Post your Workstations

File: IMG_20160709_190710.jpg (751KB, 1944x1944px) Image search: [Google]

751KB, 1944x1944px

Muh bench, not pictured is the table saw that sits at the same height so I can clear off the bench for an out feed table for long rip cuts.

>>1053189
Why the fuck did you despoil this nice woodworking bench with a bench grinder and metalworking vise? That stuff needs to go on a separate bench. Especially the bench grinder, since on top of covering everything in dust - which you just might not give a fuck about - it blocks the end vise.

>>1054058
autismintensifies.jpg

>>1054058
it's a work station for a man not your fairy queer hair saloon

>>1053189
looks good though i prefer large workbenches so i can have on one side the grinder on the other vices and on the side of the vice a small anvil, can't take pictures of mine cause i don't work at home, maybe tomorrow

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

It's pretty messy atm

>>1055897
whats up with that bunch of Monkey Wrenches...i can get behind having 2 o 3...but theres...like 10

>>1055897
what is with your obsession to yellow paint

>>1055897
>Smooth jazz
Comfy as fuck

>>1055897
What is that sweet old vise?

File: behold1b.jpg (1MB, 3008x2000px) Image search: [Google]

1MB, 3008x2000px

>>1053189

>>1055904
>Monkey wrench

Quite clearly stillsons.

Ugh.

>>1056675
What are those wood cabinet speakers?

>>1056127
Not poster of the pic, however usually its marking for identification.

Eg, i use bright fucking orange.

> spend $$ buying decent tooling
> find random fucks using my tooling without asking 'cause they bought cheap shit that broke, or had none.
> turn and assume position.jpg
> "i found it lying around"
> BULLSHIT. My shit has a place, away from you, and is orange so i can see fucktards like you pretending to work with it.

....obviously this anon either uses them for actual work, or has done so at some point.

>>1056675
>Estes Phoenix model
I still have mine. Good times.

>>1056675
Loved it.

>>1056687
thx anon, i said that cause i didnt remember the proper name

>>1056790
The ones on the wall are coral bx-200's the ones on the shelf are Monarchs

File: DSCF3358.jpg (2MB, 2000x1334px) Image search: [Google]

2MB, 2000x1334px

>>1053189
Only half of it, rest is 3D Printers and other stuff. I have no bed, no shelf for clothes and this is my only room for living :(

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

-blacksmith shed, with used garish bathroom equipment(the blue stuff)

Fuck mobile, image just flipped. :(

>>1056687
What are that many stillsons used for? Genuinely curious.

>>1057040

I'm not op but I'd have that many for different pipe sizes. Larger the diameter the more leverage you're going to need to complete the joint.

>>1056675
Really cool anon, can we get some closeups?

File: shed.jpg (677KB, 2048x1152px) Image search: [Google]

677KB, 2048x1152px

>>1053189
delivered 10ish minutes ago

>>1056956
you're living the dream

>>1056956
When all else fails, hatchet on the right.

>>1056800
yeah, agreeed. i painted all my stuff dayglo pink at one point, just to stop other trades 'borrowing' stuff and forgetting who it belonged to

File: 1453264378008.gif (2MB, 436x476px) Image search: [Google]

2MB, 436x476px

>>1054058
>despoil

>>1056956
closeups plz

>>1057962
>for the cuck on the go.

>>1058269
why is he a cuck?

>>1053189
If a piece ever catches on your grinder it's probably going to break your window

>>1058379
Because memes

>>1055897
Love the lone usb in the middle of the table.
like a lost digital puppy in a sea of analog sharks

>>1056956
i'd fucking trade those things for this, straight up you're living the dream

>>1056956
Comfy af

Whats a good brand for a sturdy metalworking/mechanics work bench? Preferably with a metal surface so motor oil can't seep into the wood

>>1057962
Nice, I really want a shed I could work in but I'm renting

>>1056956
>I have no bed, no shelf for clothes..
least you live in a land where you can buy decent beer anon. Swap you all the adventurously-assembled IKEA beds in Bongoland for a case of Tegernseer. And don't try telling tell me thats not an Augustiner case next to it, I'd recognise that lovely shade of deep blue anywhere. Count your blessings bro, because, thats a fucking big one in my book.

File: iphone sept 2016 454.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>1053751

File: iphone sept 2016 527.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>1059343

>>1059344

This is stellar. You must have a big house or a lot of land.

>>1059344
What's in the cupboards?

File: tmp_12049-20160923_082035-1600x900-89553267.jpg (250KB, 1600x900px) Image search: [Google]

250KB, 1600x900px

watchmaker here
clocking in for the day

>>1059343
This is my dream.

>>1059344

>nuka cola

File: IMG_20160923_123440_314.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

>>1059343

>tfw your "workshop" is a 7x9 room in a constant state of getting it together

File: IMG_20160923_123457_845.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

>>1059427

>back to the wall

At least i have a drive way to cut lumber or steel on.

>>1059400
Underrated post.

>>1059400
I appreciate the orderliness of your desk, but I'd really like to see it in the middle of a project. Watchmaking seems like it would be interesting.

>>1059531
im home from work now. tomorrow morning i take a pic of a more mid-project desk

>>1059427
I know that feel, anon. I have a smal corner of a crowded garage to work in, and my workbench is an old shipping crate on it's side with the lid bolted to the top for a work surface. It's sufficient for what I need though (Light carpentry, mostly.)

>>1059430
anime/10

but it's really nice, I'm jealous

Im so jealous of all of you, even from the "corner getting it together guy"
, i dont even have a fucking room for myself and i got all my shit in a tiny space

File: tmp_32187-20160924_080255-1600x900178325547.jpg (267KB, 1600x900px) Image search: [Google]

267KB, 1600x900px

>>1059531
here ya go anon. this is my most commom desk layout for a typical watch service. the watch is disassembled and is now post-ultrasonic bath.

an assortment of screwdrivers, my favorite tweezers (bronze mostly, a few ultrafine in steel) grease/oil cups (4 kinds), a rinse dish of trichlorethylene, and bits of wood and putty (for cleaning up pieces of lint, breaking up left over residues, etc.)

File: tmp_32187-20160924_075700-1600x900473806046.jpg (313KB, 1600x900px) Image search: [Google]

313KB, 1600x900px

>>1059926
and, just for grins, heres one with some of my other problem solving tools on display

>>1059930
Very interesting. Thanks anon. Would have never thought of the clear "cake cover" type things to cover the parts. I assume this is to keep dust to a minimum?

>>1059940
yep, thats exactly right

>>1059930
Very Nice.

>>1059343
>>1059344

Goddamn.

That is 100% rad, man.

>>1058379

I don't think he was specifying anyone in the thread.

File: 1438638435213.jpg (1MB, 3008x2000px) Image search: [Google]

1MB, 3008x2000px

Not mine, but one of my faves. From a past thread, I think.

My actual station isn't that interesting, but here's my storage area where most of my parts/tools live

File: 25.9.16.jpg.jpg (2MB, 3024x4032px) Image search: [Google]

2MB, 3024x4032px

>>1060567
Of course I forgot the pic

>>1059360
shop is twice the size of the house!

>>1059425
glad you noticed

>>1059414
thanks it is my too still some minor tweaks to do

>>1059343
>#1 dad

Awwwwww

I've spent a fair amount of time here.

I don't like how this saw tips into the fence. But alas our good saw is at another job.

File: IMG_0254.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

>>1060808
Of course.

>>1059343
clean.

>>1060639

>he put them up there himself

>>1059930
>>1059926

Where I come from everybody has to be a jack of all trades as being a specialist gets you work once every 6 months

So I find the specialist stuff extremely interesting.

File: SAM_4001.jpg (3MB, 4608x3456px) Image search: [Google]

3MB, 4608x3456px

>I swear, I'll tidy up after this project.

;_;

>>1060568
You're in the Twin Cities too! Noice!

File: IMG_20160923_165815.jpg (1MB, 4160x3120px) Image search: [Google]

1MB, 4160x3120px

Cleaned out the shed that has been used as a dump for shit that nobody uses.

Currently still in a rather shitty condition, going to change a whole lot and make it real comfy though.

>>1060951
Heeeeell yeah boi post yours
I've been meaning to visit Ax mans lately but it's that time of year where the state government decides to fuck all of the highways up with construction.

>>1059430
oooh, i remember this anon. how you doing?

>>1059930
>>1059926

Just curious, but how did you get into it? I'm thinking about picking it up as a kind of hobby because I am a blacksmith by trade and I'm looking for something somewhat relaxing that I can do over a few months that is also a bit meticulous, if that makes sense. Just something calming.

>>1060868
of course i did! they are 4 and 6 cant be trusted with the ladder yet

>>1060868
of course i did!
they are 4 and 6... cant be trusted on the ladder yet

File: 201128xdfghvxdfghv (184).jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>1061050

File: IMG_20160711_143516.jpg (3MB, 3264x1836px) Image search: [Google]

3MB, 3264x1836px

Can't be fucked to adjust the brightness.

but on occasion, it looks like I know what I'm doing.

>>1061050
you have a vending machine?

>>1062174
Looks rad son if only I could actually _see_ it

>>1056956
Where do you sleep?

>>1060956
What router is that?

>>1062174
Nice, what lathe is that?

>>1062500
>>1062174

Also what mill is that?

File: 20160929_003310.jpg (2MB, 2560x1440px) Image search: [Google]

2MB, 2560x1440px

Here is mine

>>1062500

Its a Drummond 3.5-inch Flat-bed 1902. Was a treadle lathe, but it has a motor now. Cost me £100 and is handy for "fuck am I using a machinist, I just want this bit to fit"

>>1062501

Its a Dore Westbury mill. My neighbor gave it to me after I spotted it years ago and asked for it when also borrowing his ladder. Don't get much use, but its just handy to have.

>>1062583
"Thanks for the ladder can I take the mill too?

>>1062345
Yeah. A buddy of mine picked it up it for a few hundred bucks because it wasn't working any more. All I had to do was replace the compressor and recharge the cooling system. And also rig it so it doesn't require money.

>>1062635
What makes it better than a few hundred dollar fridge? Weatherproofing?

File: 62101933.jpg (1MB, 1620x1080px) Image search: [Google]

1MB, 1620x1080px

Comfiest place at home. Thinking about adding some larger windows if I can find any.

>>1056675

>EE lab

So jelly my head could come off right about now

>>1062636
It's not better in any way, it's just a novelty that's fun to have

>>1059427
Same only mine is 5 times worse mostly.

File: 1416070435002.png (66KB, 256x256px) Image search: [Google]

66KB, 256x256px

>>1062588
I know, cheeky, but I help him out with his van so evens out. Guy was a train engineer. Good chap.

>>1062640
What is that vise? Its base looks unusually wide for its size.

>>1062548
that doesn't look the most comfortable position to weld

>>1060935
>>I swear, I'll tidy up after this project.
haha i say that all the time

>>1062640
did you just make a smoke absorber from a PC fan and a car air filter? it loks cool

>>1062759
Ahh, makes more sense now

>>1062497
I think it's a Linksys

>>1062833
Har Har

I'm referring to the cnc router

cnc? Never heard of that brand of router, I'm guessing it's specialty stuff you can't just walk in and pick up at Best Buy?

File: 230948739793.jpg (439KB, 656x1000px) Image search: [Google]

439KB, 656x1000px

>>1062778
I made it in highschool, just followed the plans they gave us.

>>1062789
I did, but I remade it recently. It wasn't sucking much even with three fans. I found it more effective to just blow the smoke away instead.

>>1060535
and
>>1056675
are mine the second one is an old picture.

>>1063247
reverse that, the first is an old picture.

File: IMG_20160930_140304.jpg (4MB, 4160x3120px) Image search: [Google]

4MB, 4160x3120px

It's a bit of a mess right now because I just got the big workbench on the left and it doesn't have a lower shelf yet. Plus I'll probably put in a couple of drawers.

>>1063256
The blackboard is a nice touch

>>1062692
Decoration is worth something I guess.

File: 1475255983637-321590503.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

Part of one of my shops

>>1063256
Hey... are you making a bike?? Damn me too, can we start a bike build thread on this bitch?

>>1060935
Post doggy

>>1063355
How do you get any work done without tripping over all that shit

Planning on making a decent woodworking bench tomorrow, so you guys have any good recommendations for a wood vise? Preferably under 50 bucks

>>1063355
That's no shop, that's a storage unit

>>1063478
Second hand or make your own. Check craigslist/ebay.

>>1063469
>>1063494
I move the bikes outside unless its raining, and i live in california so its never raining. Also have a dedicated woodshop next door to this and largeish concrete pad outside.

>>1063374
>doggy

where'd you get that idea?

>>1063256
You smithing dragonstone bracelets? Air battle staves are faster, my man.

>>1063355
>post your workstation thread
>no station to work at
>???????

WTF dude, all of the floor and all of the tables are covered with shit. You'd spend more time making room for a project than doing it.

>>1056956
get a sleeping bag and a light mattress

>>1064345
Two shops. All the bikes roll so they can be moved outside. The wood table is cleared off now, and is on castors. Work benches all the way around shop and 3x5 welding table outside

File: DSC_4354.jpg (777KB, 2500x1406px) Image search: [Google]

777KB, 2500x1406px

Just finished my main workbench yesterday.
Plan on having a section next to it to sit my radial arm saw, and then maybe another one next to that.

Filling up the tool board is next

File: DSCN0082_new.jpg (755KB, 1824x1368px) Image search: [Google]

755KB, 1824x1368px

Already posted in another thread

File: FLIR0004.jpg (48KB, 320x240px) Image search: [Google]

48KB, 320x240px

t. FLIR

File: IMG_9131[1].jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>1053189
my shop, where i mostly work on laptops and phones, but get into tvs, game consoles, other general electronics

>>1065248
how is life in australia?

File: 2016-04-09-17-19-28.mp4_snapshot_07.44_[2016.04.09_19.10.41].jpg (13KB, 320x240px) Image search: [Google]

13KB, 320x240px

>>1065244

File: FLIR0171.jpg (102KB, 320x240px) Image search: [Google]

102KB, 320x240px

>>1065244
>>1065496

>>1065496
god dammit dave, you better have remembered to plug the it back in the charger when you were finished shitting around with it

File: FLIR0034.jpg (146KB, 320x240px) Image search: [Google]

146KB, 320x240px

>>1065508

>>1060619

You got the priorities right.

File: IMG_20140412_145447.jpg (382KB, 1600x1200px) Image search: [Google]

382KB, 1600x1200px

Machining corner.

File: IMG_20140412_150038.jpg (430KB, 1600x1200px) Image search: [Google]

430KB, 1600x1200px

View from the mezzanine.

File: IMG_20140412_145435.jpg (416KB, 1600x1200px) Image search: [Google]

416KB, 1600x1200px

Stuff.

File: IMG_20140412_145231.jpg (458KB, 1600x1200px) Image search: [Google]

458KB, 1600x1200px

More stuff.

File: IMG_20140412_145326.jpg (417KB, 1600x1200px) Image search: [Google]

417KB, 1600x1200px

More.

>>1067341
holy shit what a mess

File: Screenshot_2015-03-12-20-34-49.png (251KB, 480x320px) Image search: [Google]

251KB, 480x320px

More

>>1067343
Yes, its a miracle anything gets done.
Have to spend half a day making room to work sometimes.

>>1067336

Hobby or pro setup?

it screams hobby, but i have seen some shitty shops

>>1067514
I'll call it semi-pro. It's a collective 3 man work space where we pay the bills with 3-4 hrs. a day of industrial welding and other small jobs to finance our car, motorcycle, and racing habits.
These are older pictures, one of the guys has 2 dragsters in there now. As well as even more junk.

>>1067484
Oh god, urge to organize at max levels.
A peg board on that back wall and tossing some of that scrap-ish looking wood bellow the table would go a long way.

Also, that a bucket of pennies?

File: Untitled.jpg (419KB, 2061x589px) Image search: [Google]

419KB, 2061x589px

>>1056675
Looks cozy

>>1056956
Like your under shelf lighting

>>1059343
So jealous of all that open space and plumbing

>>1060935
Haha me too

>>1063017
Nice, I like that

>>1067338
>>1067345
>>1067347
So many nice looking custom bikes. I wish I had the resources to fabricate like that.

Here's one of my workbenches. I can never seem to keep it clean. I always say I'll clean it when I'm done, but it's never-ending.

>>1056675
Huh, I have a similar version of that yellow radiological survey meter.

File: 1475079678318.jpg (3MB, 3264x1836px) Image search: [Google]

3MB, 3264x1836px

>>1062174

>>1059343
Super jealous, anon. Nice setup. Update your calendar though. Also, did you make the figurines and ship on the top shelf? They look really fucking nice.

>>1067561
Beautiful

File: 20161005_152257.jpg (766KB, 2048x1152px) Image search: [Google]

766KB, 2048x1152px

In the process of organizing and cleaning up.
Next is to mount the vice.
I'm thinking of painting it black to match my boxes.
But first, how do I clean the rust off and what should I lubricate it with? Oil/grease?
Thanks in advance.

Oh, rate it if you want and critique it/gibs tips

>>1056675
>Model rockets
My nigga

Maybe I'll post my sidewinder later.
Is that an ammo belt for a nerf Vulcan on the wall?

>>1056956
Where the hell do you live and how do you sleep/clothe and bathe yourself?

I love the set up though.

>>1056962
>>1056966
It's ok, I just flipped my phone :)
I see a vice mounted on a log. Other one looks like a rail head anvil. How well does a log mount vice work?

>>1058269
Kek
>>1058379
It's a joke about cucks going to the "cuck shed". Like other anon stated it's because of /pol/ memes.

>>1059344
The sink seals the deal. All you're missing is a urinal. Fuck I'm jelly.
>>1059400
t. bomb maker lol
Do you make good money or is this a hobby? Those look like vacuum chambers, interesting. For keeping dust off parts?

>>1059930
>problem solving tools on display
>no hammer

>>1059945
Huh, they reminded me of those vacuum jars from science class.

>>1061045
You have two kids in a house smaller than your shop? You must be bald from ripping your hair out.
>>1061050
Nice prelude.

>>1061051
Damn, I want a lift so bad. How much did it cost with install and what did installation entail?

>>1063256
Mad scientist/inventor blackboard is a nice touch.
>>1063355
That's setting my ocd meter of the charts. I can't even look at it.
>>1063494
This
>>1063596
No excuse for that chaos. Organize your shit anon.
>>1065036
Looks good. What kind of drill press?

>>1065511
Kek
Why do you have a flir camera anyway?

>>1067350
>Have to spend half a day making room to work sometimes.
Spend 2 days organizing and you won't waste precious time. That inefficiency irritates the shit out of me. I hate going over other people's and waiting while they take an hour just to make room.

>>1067484
Nice cum bottle. Organize that mess, pleb.

>>1067515
>one of the guys has 2 dragsters in there now. As well as even more junk.
I'd kill myself. I can't work in hellholes like that.

>>1067932
Thanks.
Drill press is some old 'Universal' brand. Does everything i need it too, so no complaints

>>1065036
That grinder looks sketchy as fuck,dangling from two wood screws the way it is. Are you actually running it like that or is it just for storage?

>>1067955
Just for storage m8, hence the handle.
Screws are fuckhuge btw

>>1059430
That's super efficient! Saved for future reference.

>>1067517
Nah that's foamed clay

>>1059168
Obviously you build one yourself, to suit your own needs.

>>1059430
Oh, hey, I remember you. Glad to see you're still rocking the cramped spaceship storage closet workstation look.

Btw, that fire extinguisher isn't worth shit, you should get a real one.

File: ^455361AC54F02BD85F5492F80D61C286F7088F71457E4C55E1^pimgpsh_fullsize_distr.jpg (92KB, 1200x675px) Image search: [Google]

92KB, 1200x675px

>>1053189
It's pretty messy but gets the job done.

File: barn.jpg (76KB, 675x1200px) Image search: [Google]

76KB, 675x1200px

Here is another pic got a whole barn messy as hell though.

>>1067933
I spend 4-5 days a month organizing. More stuff just keeps coming in, makes me wanna pull my hair out as trying to get anything done is a massive pain.
The guy who actually owns the building is a hoarder with OCD. There's got to be 100 projects 1/2 done everywhere.
But for $100 a month and a cut of what I earn, I've got my three motorcycles stored there, my three trucks outside, two bikes I'm building and a car bay if I can keep the crap out.
My rent also buys access to 4 bridgeports, two lathes, upright & horizontal band saws, sanders, grinders, tubing benders, metal brakes, sheet & ring rollers, bead roller, multiple sized Stick, MIG, & TIG welders, brake lathe, bike & car lifts, exhaust bender and a tool room wit more nibblers, shears and every other power tool than you can count.
The guy who owns this place was my mentor and he's getting older, has no kids and I'll eventually be taking over this madhouse.
First order of business is calling for a scrap dumpster, then setting up an ebay store.

>>1067921
>how do I clean the rust off
Nigga how do you have a shop and not know this

Wire brush, steel wool soaked in rust remover using gloves, lots of ways to remove rust

Also any old grease on the threads will work. Use grease not oil though

>>1068214
Kek, I wish it was a shop. I just wanted to see what preferences other anons had.
Thanks

>>1067932
I was thinking about getting one of those dinky 80x60 thermal cameras that plug into your phone (FLIR one I think?), then I read about the FLIR E4 hack on EEV blog and realised I could get a 320x240 FLIR camera for $800 instead of $5000. Couldn't resist. Works well for troubleshooting electrical stuff (you can see what wires/components are hot) and we even took it out hunting once, though it's pretty wide angle. No gunz, so we were hunting wild goats with recurve bows; seems kinda funny to be combining space age technology with medieval tech.

>>1068463
>combining space age technology with medieval tech.
Try prehistoric tech. That might be an exaggeration but you get the idea.
Start a thread and show what you did, I'd love to check it out.

>>1067968
>Oh, hey, I remember you. Glad to see you're still rocking the cramped spaceship storage closet workstation look.

>Btw, that fire extinguisher isn't worth shit, you should get a real one.

What makes you say that? It's a certified ABC dry powder 500g extinguisher and it seems to be pretty popular in automotive applications.

Have you seen them tested/used somewhere? I'd love a link. I liked the idea of an aerosol extinguisher since I can just buy a new one ever five years and not worry about testing/recharging in the mean time, but if they don't work...

>>1068472
Actually far less interesting than I made it sound. In reality we dicked around with the FLIR for about 30 mins and realised it wasn't going to work that well so we left it in the car. Plus it was daytime. And we didn't manage to hit anything with the arrows. My friend proved himself to be a fucking badass by running down and grabbing one with his bare hands after I startled it with an arrow, but we ended up letting it go since we couldn't be bothered hauling it's carcas back and butchering it (they're considered pests here).

>>1063355
I have now added a car in there

File: hobelbank.jpg (635KB, 1944x2592px) Image search: [Google]

635KB, 1944x2592px

no backside in this pic, but it's usually there

File: spiderman-neat.jpg (23KB, 400x324px) Image search: [Google]

23KB, 400x324px

>>1068635
>Dem planes
>Dat bench

Carpenter?

>>1059375
old sour cream

>>1059375
used up porno

>>1064333
Obviously cannonballs are the best exp/hour/work ratio.

>>1067336
>ONE Mill, ah ah ah!
>TWO Mill, ah ah ah!
>THREE Mill, ah ah ah!

>>1067336
>3 knee mills

nigga, sell two of those and get an akira seiki 3 axis CNC.

>>1063256
I want to hang a blackboard in my place now.

>>1068473
In my experience, the aerosol can extinguishers are total ass compared to a real, 2+ gallon rechargeable extinguisher.

For just shoving into a glovebox or trunk or something they work fine, but I personally wouldn't trust them in a home or shop environment.

>>1068926
I try not to do anything too dangerous at this bench (power tools and flammable chemistry is outside work), the risks are mostly small electrical fires. It's quite a confined space, so if the fire was of any significant size I would have to evacuate before I suffocated, and watch my house burn down ;-( . CO2 extinguisher is out for similar reasons.

A 2 gallon extinguisher would be a bit overkill I think, but I might upgrade to a 1/2 gallon dry powder extinguisher.

So far I've never had the opportunity to use an extinguisher for real, and hopefully I never will...

I take it you've had to use one, or at least watched one being used?

File: IMG_5339.jpg (1MB, 2448x2448px) Image search: [Google]

1MB, 2448x2448px

My setup

>>1057962
You're retarded. You can build a shed for cheaper, those plasticy pieces of shit are expensive. Just build a pole barn, simple.

>>1062779
At least he isn't a faggot MIG welder and taking the easy way out. All about that TIIIIIIIIIIIIIIIIIGGGGGGGG

>>1068951
I'm a volunteer firefighter. You're probably right about it being sufficient, but I don't like taking chances. I've seen way too many houses burn to the ground that could've been prevented with a working fire extinguisher.

We've tested a bunch of those aerosol extinguishers, some of them work as advertised, some don't. About 50/50.

You should get a second one and test it for yourself.

>>1067567
naw trinkets from my childhood....its an old photo

>>1067923
>Is that an ammo belt for a nerf Vulcan on the wall?
that is a belt of M61 Vulcan spent ammo 20x102mm. Found it in a small dump near a national guard shooting range.

>>1067561
Fuck, you made the garage look all fantastical.

Also I need to fix that radio again.

File: 14695374_10207442392517932_8125194933867518348_n.jpg (58KB, 960x540px) Image search: [Google]

58KB, 960x540px

Just bought my first house, just built my first workbench. Kinda poor, working on getting more tools, but I'm working on my first woodworking project ever.

>>1071905
One step at a time m8. You'll get there.

>>1071915

Thanks, I appreciate it.

Thanks to this thread I'm outside cleaning the shop garage. Plus it's raining so I can catch up. Haha

File: Panorama_dielne001b.jpg (841KB, 4263x4491px) Image search: [Google]

841KB, 4263x4491px

still unfinished workshop sorry for the mess

>>1072063
watch out for this guy, he has two glue guns.

>>1067337
>>1067337
is that an amx in the background?

>>1068739
No, electronics engineer!

>>1072085
more important, why don't you?

>>1072356
I think they are more trying for the why of two.

I'm going with one is high temp one is low temp, or different size sticks.

>>1072063
Neat, I am copying your tape holding rack.

>>1072571
sure go ahead i got it from Adam Savage he used water pipes or somthing like that i reused tubes from old solar lamps i had lying around

File: This Isn't Even My Final Form muh.jpg (109KB, 3018x738px) Image search: [Google]

109KB, 3018x738px

>>1072561
the smaller on i got as first it uses the 7mm glue sticks and the bigger one 11mm i got months later when i started to glue more stuff(the smaller one eats them like candy when i glued somthing bigger but is ideal to glue small thing in small places) the guns are cheap(hobby chink shit) the small on cost around 5 € the bigger one cost 6+€ the mostly available is the universal glue so no much choise for me
also both of them run on 200C
pic not releted

>>1062837
#1 China Router Good Time

File: 2016-10-22 07.05.44.jpg (1MB, 1885x1060px) Image search: [Google]

1MB, 1885x1060px

Just finished 1/2

File: 2016-10-22 07.06.17.jpg (1MB, 1885x1060px) Image search: [Google]

1MB, 1885x1060px

>>1073816
2/2

>>1073816
What is that bench vise?

>>1063017
You shouldn't blow on fused solder because it can weaken it.

File: 20161021_123210.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

Cozy

>>1073823
Quite an old metalwork vise, Australia brand.

File: 20160928_174823.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>1053189

>>1073838
mess as fuck, i know.
i have put off making a nice shelf for component drawers for ages. because that means i have to actually sort all of my components ;D
this is about half the bench, this is the short on of a long L.

there is also another table with a vice, right behind me as i was taking this pic.

there is also quite a lot of shelving.

its kinda messy now as we are in the process of getting firesafety up to code.
and in an old swiss villa, that is a lot of work.

>>1073838

>junkyard
>tfw that fluke just sitting amongst it all

Next time, just clean up before you buy some overpriced junk

>>1073979
>buy
>junk.
wrong on both accounts.

it was thrown out by a colleague at my old job.
faulty mA function.
I kept it, and later our calibration guy fixed it and calibrated it for me.

think what you want, but its the best multimeter I've ever had by a wide margin.

similar story much of my equipment.
scope, trainer and a desoldering iron and more were given to me when we were cleaning out before moving house.
the handheld desolderer was broken, malrepaired and thrown out. I fixed it after hours and kept it.
same for my LCR meter and probably more I can't think.

the only new lab equipment I have is that bench PSU, which was a birthday present.
the variac, i found at a junk dealer.
my brother milled out the acrylic assembly for it on his then new cnc.

also, why would i clean up halfway through a build anyway?
I know where everything is and i need just about everything on that table.
I guess i could put away the modular synth...

>>1058379
because a bunch of /pol/ users fancy themselves handy or because theyve bought into their own meme's, either way use sage accordingly

>>1073934
>Vintage Craftsman machinist chest detected.
I approve.

File: Workstation.jpg (479KB, 2304x1536px) Image search: [Google]

479KB, 2304x1536px

>>1074003
>>1073934
I have the 8 drawer 26" wide version.

The top of my dresser is basically my workstation right now due to living in a condo. Hoping to have a place for a proper workbench soon.

>>1074003
fucking machinist chests go for crazy money at auctions around here.

i wanted this neat looking wooden one and was outbid by some hipster chick who wanted it for some art thing. i think she got it for $300+. the chest was just a bonus too, it had all sorts of carbide inserts/vee blocks/little tools that are probably going in the trash after she got it.

File: 1022161701.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

Here is mine.

I bought a house a few years ago and in the basement there is a small room. So I am turning that room into a workshop.

It's a work in process.

>>1074256
>>1074277
I have a newer version of the smaller one (crappy "Sears Craftsman" logo). Paid $8 for it with a haphazard selection of old tools. The most I ever paid was $90 for a Kennedy 7 drawer chest plus a Kennedy rolling cabinet to put it on. I've got a few Kennedys, a Wards 'Master Quality' and even an old Sherman-Klove (called SK Tools these days). The only wooden one I have is a 'Union' check that was probably made shortly after WWI. I think I paid $20 for it. Its not nearly as nice as a Gerstner but its cool looking.

>>1074280
Looks like a great little space.

>>1074304
>>1074304
Thanks! I dig it. I don't have a garage or anything, so this room is it.

>>1056956
How did you hack sleep?

>>1073825
It just blows the fumes out of my face

>>1062548
saved. you are busting a sick move there.

>>1062640
my favorite itt

File: IMG_0583.jpg (3MB, 4288x2514px) Image search: [Google]

3MB, 4288x2514px

I'm just a poor student :(

I will however upgrade once I find a job or get enough money from repair other's junk.

File: IMG_20160803_201525.jpg (486KB, 1600x1200px) Image search: [Google]

486KB, 1600x1200px

My newbie soldering bench/table/craphole

>>1074256
Nice nigger beater. What is that, a 6 cell?

>>1074277
Fucking hipsters, scum of the earth.

>>1074523
Watcha brewin?

File: 1477036524806.jpg (150KB, 750x924px) Image search: [Google]

150KB, 750x924px

>>1074773
>Watcha brewin?
At the time, 35 gallons of wine (not all pictured) for my wedding.

I've been brewing for almost a decade and it was as good, if not better, than store bought wine which was also served.

Store? $15. Mine? $0.87.

Can I get my DIY badge now?

>>1074773
>What is that, a 6 cell?
Yep, 6C

File: IMG_1899.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

1/2 of my disaster

File: IMG_1900.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>1074819
2/2 of my disaster

>>1074776
>better, than store bought
Enjoying the fruits of your labor always is.
I've always wanted to learn how to make it after my Italian grandfather told me he made it with his parents when he wss growing up.

>>1074819
The only disaster is your ktm kek. I'm kidding, I'd ride it. Overall your set up isn't bad it that messy at all.

File: who cares.png (190KB, 491x437px) Image search: [Google]

190KB, 491x437px

>>1056962
>that blue cast iron anvil

Do you guys build most of these yourself? I really want to get set up once I have a house - stuck in an apartment for now.

>>1074937
Yeah it's kinda traditional to diy your diy workbench, depending on what your requirements are.

>>1067923
>rail head anvil
Man I'm not allowed on CSX property any more trying to get one of these.

>>1074939
Makes sense. I guess I just wanna start planning for one, even though I don't have a place for one yet.

File: 20161021_113049.jpg (1MB, 3264x1836px) Image search: [Google]

1MB, 3264x1836px

My first workbench. I didn't want to go too crazy because I'm only renting and I know I have plenty of moving in my future.

Next step is attach my dad's old bench vise

>>1067998
uncool dude, sell the crap, but pass on the tool.
Find someone interested, train them, teach them to love making stuff.

>>1074967
good work anon. looks sturdy.

If you have a small hand plane, you can chamfer or round the corners of the plywood top. I did it to all of my wood benches, no regrets.

>>1067932
That lift was somewhere around $5k from Northern Tool I think. Although this is a pretty high capacity one that we needed for servicing the stakebody dumptrucks we use in our landscaping business. If you need one just for cars & normal pickup trucks you could get by with maybe $3k.

Me & my brother installed it over a weekend. All that you really need to do is drill the slab to install anchor bolts and connect the power. The rest is just basic assembly which should be really easy for anyone who needs a full size automotive lift in the first place.

>>1075023
Not yet, shopping for some planes though. Just gonna hit it with some chisels and sandpaper

>>1055904
2 of each size for backing

>>1074523
those benches look sick

>>1072085
reach for the sky honkey

>>1074523
>
Home brewing?

>>1068851>>1068858
Actually there's a forth mill behind the others, next to a surface grinder and the lathes.

>>1074996
Oh fuck I'll never get rid of tools or equipment.
EBay/Craigslist would be for the other shit in there. There's at least 30 engines in various states and at least as many trannys.
Blowers, carbs, chassis,ect. boat motors, cars that will never be finished.

>>1056675
>That vacuum tube tester

Hnnnng

>>1074441
a poor student and a messy student

File: 1461705106788.gif (514KB, 250x138px) Image search: [Google]

514KB, 250x138px

>>1055897
that feel when the post text is in your search history for a different reason

>>1074280
is the floor not level? or the bench?

>>1075331
>>1075329
>>1075328
Pretty neat, what is it?

File: 1477304705387.jpg (863KB, 1544x1543px) Image search: [Google]

863KB, 1544x1543px

>>1053189

File: FB_IMG_1476763602946.jpg (129KB, 528x960px) Image search: [Google]

129KB, 528x960px

>>1067345
Almost as un-comfy as my piece of shit sportster/10. Nice anon.

Heres my $6,000 yard ornament / blocking my way to everything i need in the garage divice.

>>1067347
> Trike spotted.

More trike requested.

Also, rip.

File: Screenshot_20161025-212513.jpg (2MB, 1374x2036px) Image search: [Google]

2MB, 1374x2036px

>>1073838
Marshall spotted. Guitar or u slappa da bass mon?

File: FB_IMG_1477324675103.jpg (25KB, 540x960px) Image search: [Google]

25KB, 540x960px

>>1074939
What if my requirements are i hate working out of boxes and nowhere to fucking stand in my cuckshed? Can i fill my garage and build a makeshit fagbench from scrap lumber or is that more /biz related. It will require kneepads and i wish to make 5 million dollars with it in 4 days with a hammer and 4 bent reused nailes.

File: desk1.jpg (3MB, 3385x3010px) Image search: [Google]

3MB, 3385x3010px

tfw u accidentally the whole room
#shittyikeadesks

File: 20161028_051832.jpg (1MB, 3961x3024px) Image search: [Google]

1MB, 3961x3024px

>>1059430
Updated photo with new stuff

>>1076345
Flip clock my man!

>>1076406
thxbro, it's loud af but i gotta have dat aesthetic.

>>1076413
Just yesterday I watched that techno guy on youtube that does reviews on old and odd tech, reviewed 3 ebay flip clocks.

How do you guys who are in garages/sheds keep your shit from being an 80 degree 90% humidity swamp all the time?

>>1076564
A fan.
A big one.

>>1076566
>>1076567

You should hold off on tools for a while and get a camera from this century.

File: Photo0021.jpg (120KB, 640x480px) Image search: [Google]

120KB, 640x480px

>>1076570
i have more

i'm sorry i'm not a man of this century

>>1076566
>>1076567
>>1076572
Very nice workspace.

File: Photo0017.jpg (125KB, 640x480px) Image search: [Google]

125KB, 640x480px

>>1076575
thanks I made the building this spring

>>1076576
10/10 building
10/10 dog

>>1076394
I dig that

>>1076414
"that techno guy" hes my faaaavorite

>>1076570
Parkinson's is a bitch

>>1076564
Live in Montana. It is dry as fuck here, and in the winter you can never get warm enough to even call it temperate, let alone a swamp

>>1076576

Hot damn.

I'm liking what you're throwing, mate.

>>1059400
I inherited a pocket watch recently, and it's running 10m/hour fast; I think the coil might be magnetized;
what do you recommend I do?

File: Photo0022.jpg (123KB, 480x640px) Image search: [Google]

123KB, 480x640px

>>1077225
thanks m8

>>1071905


that harbor freight plane lol

my first and current bench looked almost identical to this

>>1077320
Are those good starter planes? (not op obv)

File: god I should be in there cleaning not here posting.jpg (980KB, 3000x1111px) Image search: [Google]

980KB, 3000x1111px

No bully pls, I haven't really had time to clean or even work in it since starting classes, I have only shit tools I could get on clearance, yard sales or dumpster diving and it's basically just turned into storage for shit that I know I'll find a use for someday.
I can't even get a decent table in there because I know I'll be moving soon and it's not worth it.

>>1059343
RE:RE:

See, I envy you for the sheer space you have to work with. My basement shop doubles for storage space for my family's junk we're too sentimental to get rid of but don't enjoy it enough to have in our main living area. I'm hoping I can talk the wife into letting me get a mini fridge for the other side of my bench opposite the tablesaw but she doesn't want me down in my shop all day.

File: chun li game over.jpg (486KB, 1000x1000px) Image search: [Google]

486KB, 1000x1000px

>>1053189
>tfw poor
>tfw no work station
>tfw all of my tools are stored in my closet
>tfw want to buy more toys (tools) but poor
>tfw live in apartment building
>tfw putting my faith in lotto tickets to buy a house and give me and family a better
>tfw no gf

please cheer me up

>>1077489
Where do you live?

>>1077492

brooklyn,NYC

>>1077494
nycresistor.com
hackmanhattan.com
fatcatfablab.org

Those are three hackspaces in or around brooklyn, and there are at least a dozen more. Some of them are totally free, others require membership of varying levels, you might be able to pay a small fee or even do some labor as a member for access.

If you're looking for tools and a place to work you're in a great city to find them, as well as other people who can teach you, help you, collab with you. You might find a business partner or a roomate, maybe even just a friend. Don't think that a workspace has to be in your house, you've got plenty of options.

>>1077413
Meh, it doesn't look that messy.
And the deer looks really cool.
Your work?
I also really like the floor.
The only thing I'd change is to ditch the clock.

>>1077489
Wait...
You have a family and no GF?
I have a wife but her kids are all grown and moved out.
I'd trade her for a real family any day of the week.

>>1077500
Floor is crappy linoleum that's peeling up all the time. I did make the deer though, I'm studying metal sculpture right now and really digging it. Can't wait to pack my shit up, buy a welder and lock myself in some shitty little studio somewhere in Detroit making sculpture all day.

Why ditch the clock though? It's just some trash I haven't gotten around to either fixing or tossing anyways, but you've got me curious now.

File: 3716f72ed267ee7d10e1cab9de39a2da.jpg (51KB, 550x458px) Image search: [Google]

51KB, 550x458px

>>1077503
>Why ditch the clock though?
Shop time is NOT clock time.
Fuck the real world.
(moderately drunk btw)

>>1077498
wow thats cool! i dont really leave my neighborhood much. this gives me a reason to do so.


>>1077502
mom, dad and 12yr old sister. i feel the weight is on my shoulders now to get us "somewhere" in life. and by that i mean a nice place in a white neighborhood with green grass and picket fences. i cant live with my own kind. (non white)

File: Buddy-Christ-kevin-smith-70822_360_640.jpg (49KB, 360x640px) Image search: [Google]

49KB, 360x640px

>>1077512
>feel the weight is on my shoulders now to get us "somewhere" in life
Godspeed and good luck Anon.
You're in my prayers tonight.

>>1077510
ahh, I gotcha, and I dig it. My usual routine is to buy half a dozen energy drinks and not come out until I'm too sleepy to hold a hammer. I actually used to make threads on /b/ of all places where I would use scrap to make random shit live, usually weapons or armor because they thought it was cool and I think it's cool. I stopped when it became too much of a cesspool for even my dumb shit. I've always wanted to try doing it again but the only other place I could think of doing it is here or /k/ because /diy/ doesn't allow anything about weapons. But I'd probably get laughed out of both places because it's really more of a performance than any kind of respectable craft and the end result was always more of an art piece or toy than a weapon.
(rambling, also moderately drunk.)
>>1077512
Joining a workshop is possibly the best possible thing I've ever done as a maker, just being around other people who make things is worth it. It gives you an entirely new perspective and ability to think. idle thoughts about ideas turn into real conversation with people, those conversations turn into projects and support and progress. Normally you'd make those kinds of connections and stuff in college but I know first hand how fucking bullshit trying to pay for school is nowadays, especially when what you want to learn is something that requires practice and guidance, not textbooks and exams.

File: E2_2620432a.jpg (429KB, 1300x1542px) Image search: [Google]

429KB, 1300x1542px

>>1077517
>also moderately drunk
Hey man, you seem pretty cool.
Let's do a shot together.
I've got a shot of Sauza gold standing by.let me know when you've got something ready.

>>1077519
I'm basically just drinking a bottle and a half of wine with a straw because my weak bitch stomach can't handle the kind of hard liquor that my indomitable liver requires for inebriation. But if my math is right, I should kill the second bottle by midnight.

Cheers mate.

File: ErnestBorgnine.jpg (485KB, 800x1007px) Image search: [Google]

485KB, 800x1007px

>>1077520
Cheers

File: 1477819494082424348944.jpg (896KB, 2048x1152px) Image search: [Google]

896KB, 2048x1152px

>>1053189
Its a fuckin' mess. I love it.

>moving to an earthquake zone
>have to consider it when redesigning my work space

any earthquake bros got tips for doing this?

>>1078098
I'm assuming you mainly mean the little shakers that just rattle the room around a bit and not building breakers. If it's the latter then there's not much to really do.

Anyways, you want those rubber bits on the bottom of tables and shelves, and for shelves you want ones that sit on the floor and can be screwed into the wall as well. One or the other means it'll tip over, or shake loose. And you don't want a tool wall with things hanging on pegs, those will all fall off most likely. Anything with drawers should have ones that lock, doesn't need to be a lock and key deal, but something that doesn't slide out when shaken.

Something to consider is putting a rim around any horizontal surfaces. just something that will stop things from rolling or rattling off. And bins will be useful, get a lot of them and put some kind of rubber or grip tape on the bottom, nothing will fall out of them and they won't go anywhere. Basically before you buy any kind of furniture or equipment, imagine grabbing hold and shaking it (or actually do it if it won't piss off the shopkeep). If you imagine things falling off it or rattling around too much, pass on it.

The higher up something is the more it's going to move and the worse it'll be if something goes wrong, so I'd recommend two waist high shelving units instead of one unit head high.

Aw man, bump limit.

>>1074820
so you have a total of three halves?
;^)

>>1077413
cheap second hand tools are often better than expensive new-bought stuff. Not having a lot of budget isn't an excuse

>>1068635
Are you the guy that's restoring wood tools? I think I saw you on a different board some time ago. Cool shit, dude.