How far along is the 6-axis Sex Robot?
im gonna get one of those fake asses from jlist or what ever that site is
got a bunch of shit annodized and it looks SOOO off the hook
but the main thing is that these fuckers from california wrote a program in python that i can use with my robot BUT I DONT KNOW COMPUTER HACKING FUCK
so if anyone can help me use the program these california cocksuckers wrote that would be so sick
all i just need to make my serial port setting and the setting in python match with the serial rs232 (or maybe is rs422) of my robot and then i can do some command line shit real time kinda
using human networking, i got the seceret password for the robot that lets me unlock all the PAY FOR options for free so thats sick
what else what else....
Link to what ever the fuck it is you're talking about?
ran some cables through this bitch so i can do maddddd i/o's
i wired up my operator panel with some buttons
i wired up my break out board for inside the robot panel
so much fuckign research
k so on the
ta-do list...
finalize io wiring
program some shit
buy the fake ass and mount it (heh) it will look sexier than a flsehlight and maybe be more safe
hook up peristaltic lube pump and wire it into IO
back up the robots memory, but these california cocksuckers havent replied to my emails
SO IF ANY ANONS WANT FREE FUCKS FROM THE ROBOT IN EXCHANGE FOR COMPUTER HACKING PYTHON HELP
ahhh fuck it free fucks for all anons anyways
https://github.com/jerkey/yasnac
but idk how the fuck do config my serial port in linux or in general even
i ran this cables i made through the robot
i only have yellow 1/2'' shrink tube
>>1046132
I've done serial in C++ C# and C, how hard could it be? You know any python? You on windows? You really should find out if your using rs422 or rs232, you'll need a converter if its rs422, also not all computers these days even have rs232. You got the manuals, gotta find out the baud and the other settings like parity and shit. Pretty much the shit in pic related, most important is baud, if you cant find everything some of the settings more or less have defaults.
>>1046132
It's not RS422. Nobody uses RS422.
If it's RS232 you'll probably see a chip on the board with a name like "MAX232". If there's no chip it's probably TTL-RS232 or LVTTL-RS232.
9600-8-N-1 is the most common com port setup.
>>1046141
thats the problem
python program is for an older robot that uses a baud of 4800
my laptop defults to 9600 and i cannot change it for some reason in ubuntu. im running unbuntu because its easy and its an old laptop, i got this old laptop specifically for rs232 port on the back
so the program seems to default to 4800
but my robot i think is all kinds of adjustable up to 9600
i need to get all 3 of these things on the same wave link and then i can back up/ load files to the robot
i also have an issue on which cable im suppossed to use and which communication protocol and these dicks wont answer me on IRC if its BSC or FC1 (motoman protocol)
so i need to verify pinout though
i made a cable that is similar to this, except the host side is a 9 pin, so i converted the 25 pin PC side, to 9 pin by swapping the pins to the appropriate pins on the 9 pin config
>>1046147
it does use rs422, but not for this specific task/ or on this specific board
but fuck if in takin out any boards right now
either way i can set the shit to what ever i want i think
i dont really know how to a python
do i just double click it?
look at this fucking robot plate i made
this thing is so trippy
i didnt even make an eng drawing for it
how high is this thing
>>1046150
right i forgot to mention this uses some kind of asspackwards labeling of the pins that i dont understand ill post my diagram
they have a second pin config thought and idk why the fuck is this
this is essentially what im trying to do is emulate a floppy drive to back up and load files
on the other pinout , pin 6 is not used
but on this one, pin 6 is used
im gonna make another pin thing, but also why the fuck do they have all host PC;s as using 25 pin serial ports?
ignore the hardware key part
>>1046138
>ahhh fuck it free fucks for all anons anyways
hooray!
Does it come in female?
>>1046159
do yourself a favor, get a [Pic Related] null-modem adapter - this does the crossover bit as per your pic - the rest, _always_ stick to straight through wiring, whether 9-to-9 pin, or 25, or with a 25-to-9 adapter (also buy).
Never blown up an RS232 device by wiring it wrong yet - whatver pins it doesnt use, it should ignore, solves the wire 6 or not? mystery. So, a 9-9 straight cable, a standard DB25-to-9 serial adapter, and a null-modem adapter, as pictured - if you cant get it running with some combination of these, you fucked. Prob. ;)
>>1046321
> fogot pic related in above.
>>1046150
just used putty for serial stuff but there you can adjust the baud rate
maybe look at the ubuntu forums
https://ubuntuforums.org/showthread.php?t=1609727
>>1046106
You'd better be making some serious fetish porn once you get it up and running.
Hell, I'm sure you'd find plenty of willing volunteers here <spoiler>including myself </spoiler>
>>1046368
i wonder how the torc will feel
Not to go off the rails here, but I am willing to bet that a porn company would pay to rent this thing.
My first thought is Portal porn parody. Aperture Science: Reproductive Technologies Division. Mount a Glados camera near the 'test subject', pipe in some robot voice, and do some robot femdom, with the arm doing the sex acts to the subject. Can even swap out for a fleshlight, or a vibe. Could do a whole series with different test subjects, ez money
>>1046437
>>1046437
>robot gets covered in so much jizz it short circuits it and the arm kills everyone in the room via anal
>>1046437
ask wheatley to make comments
>>1046437
Is OP near california? I'm sure Kink.com would love to get in on that. Should send them an email.
>>1046437
>rent anything sex related
do people do this?
>>1046554
Kink.com would absolutely rent this thing, it's right up their alley.
>>1046562
You could swap out the sex toys, duh. Just use the same arm and mounting brackets.
>>1046571
yeah but even then who knows how the rest of it was treated
i'd expect one company to buy it for use in their videos, but not renting to others
>>1046577
Just cover the rest of it in plastic wrap and replace it between shoots/scenes/whatever
>>1046577
Well I figured sex-axis robot anon would be on hand as a dildonics technician, he could ensure it is treated with care and respect. Also to make sure no one gets beheaded by a wayward robocock
>>1046449
>Here Jim lies
>pushing grass.
>He let a robot
>fuck his ass.
I... want one. For reasons.
>>1046437
>but I am willing to bet that a porn company would pay to rent this thing.
surely even porn studios have to adhere to OHSA
but i guess if all it does is going through a sequence of preprogrammed motions then it's no more or less dangerous than a fucksaw
>>1046321
ok i GUESS ill use my store bought null modem cable
>>1046327
damn terminal, ok i will fuck with it using stty
>>1046640
kinda what i was thinking as well , they will need someone to calibrate, and set positions of holes and things. until i get it 100% automated which will be hard but worth it
>>1046312
the whole point of the robot is to not need females
but obviously it will have both. i recently found the parameter to add multiple tools and to change tools within a job, so i will be able to use both, and use both i shall. so i will mount one of those fake asses from jlist and it will be sweet and sexy
>>1046577
my robot is over 20 years old, so shes more like...
a slave that i can have sex with, but can also kill me
>>1046593
thats the plan anyhow
k heres da old vids i should make webms but im not good at computer hacking
https://www.youtube.com/watch?v=sHM_mzgwXpA
https://www.youtube.com/watch?v=-TGGzV7vDS4
concept videos
https://www.youtube.com/watch?v=8ePsSbc-1v0
https://www.youtube.com/watch?v=4VlwUT4pIH8
>>1046683
>OHSA
pfft dont give a fuck
>no (fake) deadman switch
>safety guard relay blown/bypassed
>shock sensor removed
>safety speed limits not mandatory/ disabled
OSHA'S MOST WANTED NIGGA
>sequence of preprogrammed motions
>no more or less dangerous than a fucksaw
its wayyyyyy worse than a fucksaw, ive been smashed by robots at work, they were the small FANUS LR mates, but with the speed + mad gear boxes , it will fuck you up
as pointed out in the last thread, people die all the time from robots
>>1046689
anon be careful with your bits you only get one set
don't ruin fuckbots for the public by being that guy who was torn apart by his dildobot
>>1046704
when i die,
they are gonna name the new law after me.
im going to ruin it for everyone in my country
Are you the same guy from like a year ago that got an arm like that for cheap and was trying to get it running in his dad's garage? I remember issues with a flaky encoder causing it to shut down and lots of weed.
I don't know if I'd be happier to hear that you're him and haven't given up, or that we have (at least) two people making fuckbots on this board.
>>1046719
same asshole no longer flakey encoder but still lots of weed. i got the motor referb'd and encoder replaced cost me $2300 holy fuck and she runs like a dream, needs sex grease in the gearbox, but otherwise like a dream
they put a warranty seal on the back of my encoder
yeaaaaaah
it was referbed just after halloween
Oh my god my fucking sides, this fucking thread someone needs to archive this
can someone post the d*ldo thrusting webm?
>>1046730
Nice dude, glad you're still around. I missed the videos a few posts up, I remember those. Wish I could help with some of your questions, not really my forte.
>>1046712
>Hear anon has got some cash.
>He's got some serious tools going into his garage
>break into anon's garage.
https://www.youtube.com/watch?v=PmAOoqW1SVs
>Pretty much this but with a less cocaine and a dildo in the vice... and a chainsaw strapped to a robot arm.
>Robot arms turns to face burglar and revs.
>>1046704
It is entirely seemly for a young anon to lie mangled by his sex robot, for in his death, all things seem fair.