I found a motor perfect for my project. The only issue is th

This is a blue board which means that it's for everybody (Safe For Work content only). If you see any adult content, please report it.

Thread replies: 4
Thread images: 1

Anonymous
2016-06-25 08:14:34 Post No. 1013669
[Report] Image search: [Google]

File: $_35[1].jpg (9KB, 300x297px) Image search: [Google]

9KB, 300x297px

Anonymous 2016-06-25 08:14:34 Post No. 1013669 [Report]

I found a motor perfect for my project. The only issue is that its shaft is in metric for 3mm.

https://www.pololu.com/product/3039/specs#note2

Meanwhile, the gears I have are meant to be for 1/8 inch shafts.

http://www.mcmaster.com/#7297k11/=1304ruo

Is it possible to just use those gears with the shaft since it's only a 0.007 inch difference? Or would I be better off finding a similar motor but with a 1/8 inch shaft?

Anonymous 2016-06-25 08:15:40 Post No.1013670
[Report]

Anonymous 2016-06-25 08:15:40 Post No.1013670 [Report]

I forgot to mention my project is a small model which needs the motor to provide power to repeatedly push back against spring-loaded lever.

Anonymous 2016-06-25 08:15:57 Post No.1013671
[Report]

Anonymous 2016-06-25 08:15:57 Post No.1013671 [Report]

>>1013669
You can get a drop of glue in it, or something

Anonymous 2016-06-25 11:53:26 Post No.1013699
[Report]

Anonymous 2016-06-25 11:53:26 Post No.1013699 [Report]

>>1013671
or shim with with 0.007 shim stock (or a bunch of aluminum foil )

or bore out the gear a little more and make a press fit sleeve