Can I turn this oddly shaped bottle into a bong? How so?
>>735265775
Drill 2 holes in it and use a metal stem/bowl with a rubber grommet.
push it up your anus then jump off the roof
Of course you can. I had an almost exactly similar looking bottle and turned it into a bong about 2 years ago :)
Sadly I broke it.
Took a pencil, exacto knife, painters tape and the socket bowl I use for my GB and overall this looks promising
>>735265775
Anything can be made into a bong. If you can't figure out how you're not a stoner
>>735267377
Your not a real stoner if you don't snort your keif and put your dabs in your ass
>>735265928
this is the only way
Just use a can you pussy.
>>735267234
That tape is not going to work.
>>735267377
>>735267694
This, use hotglue op, it seals it tight
>>735267783
Somebody say hotglue?
>>735267870
>>735265775
yeah OP make cummiez on it!!!!11
>>735265775
https://discord.
-------------
gg/ctagmQE
>>735267783
I have a glue gun, hold up
>>735267906
you could just kill yourself.
>>735267902
You made me want to look up hotglued bongs.
I couldn't find any.
Do it OP.
In paper bag, crush with rollingpin, insert anally.
Results are the same
Never mind, don't have a glue gun, I do have Loctite super glue, will that work?
>>735268354
Probably not. Thicker is better.
Got any blu tac?
>>735268354
Yes just make sure to use alot and seal around the edges so no air can come through. Your also going to have to make a carb hole somewhere on it as well to clear it.
>>735268474
There's a carb hole in the back
I've got a pretty good thicc layer of glue on there, gonna let it sit and set and see how it goes.
>>735268676
Make sure it's completely dry before you try it. Don't want to be sucking in those fumes.
>>735268752
Yup, this is blue Loctite so from what I googled this needs to sit for about 6-8 hours to completely cure, some say 24 hours for max strength but I'm gonna go with 6-8. Sadly I couldn't find any red loctite, the good stuff that sets in 2 hours
>>735265928
Kek
Found some of this, gonna add this around the little layer I have
>>735269050
You should totally use that as lube for when you push the bong up your anus.
>>735269050
Yes that'll seal it up nice and tight. I would wait at least 12 hours if your going to use both though, just to be safe.
>>735269154
I've got it propped up and letting it sit now, luckily I have my GB to use since I gotta let this thing sit
>>735267234
The tape will heat up n melt n release gases n shit mate.
>>735269224
Well it's not like the Loctite would be any better if it vaporized, so I'll either get really high or die, or just not use it and get a real one.
>>735269560
Why didn't you just get a real one in the first place?
>>735265775
>not doing stoner science to figure it out
You shameful excuse for a human.
its plastic dude dont use it..
wait this is 4chan we dont care about the health of others right?
>>735265775
OP how the fuck do you expect to smoke from the top of that bottle? wtf bro
>>735265775
Smash it over your dealers head then steal his bong and a giant bag of weed
>>735269881
Who's the actual idiot here?
Who says you have to put the entire thing in your mouth instead of just making a hole in the top?
>>735270125
>>735270261
atleastyoutried/10
>>735270261
>>735270775
Keep going dude I want to see where this is going.
>>735265917
Iiterally this
>>735270775
>>735271097
>>735271452
>>735265775
You need to drill some holes, but don't just go grab the old electric drill and start drilling away. You probably need a drill bit meant for glass, and you should Google for how to actually do it, or what precautions you need to take. I'm a machinist and do a lot of drilling, but I've never tried drilling glass, and can't give you any specifics about it. My guess is that it will likely crack and shatter if you just start drilling away though. I'd also guess that slowing the rpm down would be wise.
>>735272670
Judging by OP's pictures i think its plastic. You could probably get by just slowing it down, no real special bit needed
>>735269881
I agree anon. I also love the picture. You took the visual from my head and made it real.
>>735271844
Check'd. I appreciate the effort that went into this. Very well done.
>>735271844
>dad's shed
I grinned.
>>735269050
what no
That's not what locktite is for
what the fuck
>>735272670
I've made bongs out of glass bottles. It's really easy (to fuck it up too) and the glass drilling bits are expensive. 30+ dollars for a decent one that won't burn up after one use. You'll need a buddy or a large tub full of water; either get buddy to constantly spray while you're drilling or just drill with everything submerged in water. It will get very hot without water and you risk cracking the glass.
You'll also have to do some measuring. With whatever stem length you plan on using, measure where the water will end up and calculate the angle you need to drill at. With the glass bit, if it's circular, you'll have to start by drilling with the bit angled to produce a moon like indention in the glass, which makes positioning and angling the bit much easier.
The angle doesn't have to be perfect, but if you plan on doing this often I recommend building a jig to get the angle precise.
>>735265775
it's a pain in the ass to turn a glass bottle into a bong, just buy one or buy some lab glass and connect the right peices
>>735276125
here's one I made a while back
>>735265775
as long as it's not plastic. I mean it's possible but I wouldn't recommend it. plastic will heat up with prolonged lighting of the bowl you make and the hot smoke will make it less sturdy. if it's thicker plastic like a smart water bottle it could last a bit. but it's preferred to use glass and they have diamond tipped drill bits used for glass
also putting things like glue and other chemically made solvents in or around your bong, like to seal it up is dumb. the glue will heat up and release toxic shit. don't inhale that
Fuck these guys OP. Use bubble gum. It can't be toxic if it's a food. And it's easily available.
>>735276656
shame on you
>>735278381
98 V8 convertible, love working on the engine and the drivetrain in general, but it seems like everything else around it wants to fall apart. Wanna put PI heads and intake on it, beef up the exhaust and leave it at that. Maybe swap the tranny for a manual if I run out of things to do for it, and if I could find a parts car for ~8 - 1200
Hey, how are You stranger?
No you cant
whats a bong?
just go to home depot and get a glass cutting hole saw bit for a drill 3/8s inch. go to local car parts store get flared 3/8s brake line and some teflon tape for a seal. get s glass slide from head shop or in a pinch use one of those boingy door stop things that bolt to wall. good to go