/akg/ AK General

>AK Buyer's Guide

http://pastebin.com/YdEkhdva

File: 1491091960846.jpg (179KB, 1240x876px) Image search: [Google]

179KB, 1240x876px

>>33906014
Do you get laid or just fantasize about strangers pussy?

3rd for galils are jew shit and not real AKs and should be thrown in auschwitz

What is the best akm bayonet?

>>33906038
That is one ugly Norinco. Beautiful inside however.

File: IMG_9169.jpg (1MB, 3075x3022px) Image search: [Google]

1MB, 3075x3022px

>>33906043
>akm
The one that fits your rifle or collection. I.E. Subjective.

File: 20170421_214452~2.jpg (1MB, 3718x1871px) Image search: [Google]

1MB, 3718x1871px

>>33906045
Ha ya i have the original furniture too. I needed a beater set.

>>33906043
The one that gives your balls the closest shave

File: sad gondola.jpg (74KB, 960x716px) Image search: [Google]

74KB, 960x716px

nth for seeing other people's builds get finished while you're going on 6 months of waiting for yours

>>33906058
>AK bayonet
>sharp
Pick one.
Bayonets are for stabbing not cutting.

In the pastebin it says not to buy any imported aks with us made barrels. Are they really that bad?

>>33906087
Yes.

>>33906083
Then stab the hair off your balls

File: AK74 - Ukiemod 1.jpg (1MB, 3036x1899px) Image search: [Google]

1MB, 3036x1899px

>alex has gp-25 pads back in stock
Shout out to the anon who alerted me to this. Now my AK will be whole again

>>33906087
There's very few and niche times you should use a US AK barrel over an imported one

File: image.jpg (4MB, 3264x2448px) Image search: [Google]

4MB, 3264x2448px

Postan it again because I'm excited. Still on the fence about fixed or triangle

KVar barrel tomorrow

>>33906101
>Shout out to the anon who alerted me to this
Anytime.

>t. OP

>>33906108
There'll always be another AK to do a folder with. If you bought it as a fixed stock kit finish it as one. Or buy a folder kit
t. autism

File: IMG_1962.jpg (350KB, 1620x1080px) Image search: [Google]

350KB, 1620x1080px

I need to take some new AK pictures

Are VEPRs cool? Thinking of grabbing the side folder 7.62x39

>>33906178
They are pretty good quality rifles, the conversion process can be a hassle though

>>33906281
Conversion process?

>>33906038
Is that a fuckin IO buttstock? Remove that immediately.

Any good 5.56 AKs on the market currently?

File: P1070400.jpg (2MB, 2307x1415px) Image search: [Google]

2MB, 2307x1415px

>>33905975
I shoot a lot of 23/25's with my vepr on trap & skeet.
>>33906178
>Are VEPRs cool?
Very, but personally, I think I'd rather have an arsenal sgl rifle for an intermediate caliber. I think veprs are a bit heavier than necessary for those calibers and I prefer the ak-74 features like the front sight base/brake combo.
You'll be very happy with your vepr though based on my experiences with the 308 equivalent. You couldn't ask for a more solid feeling and well finished gun. But it'll weigh a pound or more than it has to. I'm a stickler on weight though, more-so than most people here.
>>33906281
>the conversion process can be a hassle though
I suppose that's why he's getting the folder right out of the gate. Nothing to convert really.

>>33906714
That style of RPK is my favorite

Probably one of my dream guns, can't find that style anywhere though

File: IMG_2955.jpg (2MB, 1386x1550px) Image search: [Google]

2MB, 1386x1550px

>>33906758
I don't think there's anything really stopping molot from importing more.
I'm sure demand is there to send a healthy batch of all three rpk calibers into the states, IDK why nobody does. I doubt they cost hardly any more/less to produce than these vepr-fm folder rifles or sporters.
And 556 really is a nice caliber to have it in with all the ammo options. It's a lot of fun to launch some reasonably priced tracers out into open farm fields at dusk.
The only problem with 556 is that it wrecks my steel plates instantly within 100 yards at least, while steel cored 54r has pic related happen with borderline zero damage to my plates.

File: 54r steel cores.jpg (411KB, 1280x1348px) Image search: [Google]

411KB, 1280x1348px

wrong pic

File: IMG_8316.jpg (108KB, 816x612px) Image search: [Google]

108KB, 816x612px

Pic related is out for delivery today.

File: IMG_20170508_232048.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

in for dollar store RPK

>>33907563
What are the specs on it? Gorgeous rifle.

File: IMG_1186.jpg (1MB, 2022x1348px) Image search: [Google]

1MB, 2022x1348px

M92 or Draco? I love the Krink sights on the M92 but don't like that it's not chrome lined.

>>33907522
Just reminded me I have a BFPU AKM furniture set laying around for no reason still.

File: Dracos.jpg (4MB, 3000x2000px) Image search: [Google]

4MB, 3000x2000px

>>33907600
Draco

>60 dollar long collar on akfiles
>no money
F

File: F1D2092A-CD01-4731-BDF3-55F464C14B95-1651-000000FDE867A4DC.jpg (605KB, 1280x960px) Image search: [Google]

605KB, 1280x960px

>>33907817
I wish I bought one when they were cheap. I'd love to SBR one. Make pic related out of one preferably. Just with a dong instead of a palmswell.

>>33908077
Whats the price on em now? I remember they were around 450 last time i checked

>>33908040
Almost bought that too but I don't need another plus no money either

That dudes been asking like $110 for it for months but nobody has bought it and he finally took the hint and started dropping the price

File: image.jpg (3MB, 2448x3264px) Image search: [Google]

3MB, 2448x3264px

>>33906122
That's kind of what I'm thinking too

I'm also not really digging the shiny plum grip with the rest of the furniture. I've got a matte plum grip that I'll probably stick on the rifle once it's built

>>33908110
Cheapest I've seen them in my area (Atlanta area) is 500-550

>>33908194
I'll take good care of the shiny grip for you :^

>>33906714
Do VEPRs use standard AK mags out of the box?

>>33908219
Nah I'm gonna keep it because it's nice looking. I'll put it on my SLR when I put a triangle back on it

>>33908240
No, not unless you're buying one that has had a bullet guide installed already like the FMs and such

>>33908194
You double nigger

File: P1070292-1.jpg (1MB, 2560x1437px) Image search: [Google]

1MB, 2560x1437px

>>33908240
It's kindof the other way around. Sporter mags need to be modified to fit in a normal ak with a bullet guide. If you don't grind the mag where I've circled, then it won't go into the gun. That part will push up on the bullet guide and stop you from locking in.
I've modded 2 556 and 2 545 10rd mags to go into my guns.
>>33908247
So pretty much this, they'll "fit" but won't feed if you don't have a bullet guide.

>>33908277
FORTUNE COOKIE BLESSING, CHIMPS! FORTINE COOKIE NO BULLY!

I just like matte better, especially when all of the plum on the rifle is matte. Shiny plum with a triangle is nice but it clashes with the matte stock for me. Although the shiny came on the kit and is still correct a matte would be more correct for a rifle from 1988, plus it matches better (unless I'm just a retard and have been wrong about plum pistol grip production periods for like two years)

Gotta do some homework on the trigger guard too, I've read that some of these kits came in with the incorrect trigger guard for the year

>>33908247
>>33908290
Ah.

So the FIME Group VEPRs are preinstalled? I'm getting an FM-AK47-21

File: how to cover yourself in mud 101.webm (3MB, 1280x720px) Image search: [Google]

3MB, 1280x720px

>>33908478
That one should take any normal 30rd mag you throw at it.
556 is the only caliber I know of where ak mags aren't quite as universal every time.

File: Screenshot_20170424-185718.png (2MB, 1080x1920px) Image search: [Google]

2MB, 1080x1920px

>want a fire grip or forward assist
>Only want one small rail on the bottom of hand guard to mount said grip to

Does such a thing exist or am I stuck with RAILS N RAILS N RAILS?

>>33908679
Just screw a grip into it.
Like that one anon with the pistol grip attached do his lower hg.

>>33906629
It works pretty well, so no.

>>33908510
Awesome, thanks

>>33908726
I've no clue what you are referring to, it's been the better part of a year since my last trip to /akg/ save for my one post a few weeks ago

>>33908908
Just put a dong on it. That railed dust cover sucks.

Any opinions on the WASR-2?

I found one local with two steel magazines, and 500 rounds of wolf for $600.

I have never owned an AK before.

>>33908908
Drill a hole in your lower hg and screw in an extra ak pistol grip or whatever type of foregrip you want.
Alternatively, get a dong grip.

File: NewBeryl11.jpg (84KB, 602x655px) Image search: [Google]

84KB, 602x655px

>>33908964
>>33908946
I would get a dong but I hate wood furniture, I had a set on my second AK and it didn't work for what I use my rifle for very well.

File: DSC_0012.jpg (2MB, 3652x2445px) Image search: [Google]

2MB, 3652x2445px

>>33909035
Woods the best m8.

>>33908194
What's the difference between matte and shiny plum? Is one more desirable or something?

>>33908277
champs why yuo angery?

>>33909124
It's great until youre back packing/SHTF camping for a week in the PNW where it rains 80% of the year and your furniture starts rotting off of your rifle.

Just out of curiosity...
How much weight savings can you get by changing furniture from wood to polymer on a standard ak?

>>33909179
I think Chimps weighed the poly stock at like 11oz? So maybe 1/3 a pound if you're lucky

The real weight savings are in triangles

>>33909125
Just color differences

>>33909160
If the vietcong can use wood, so can you.

File: P1070362.jpg (1MB, 1704x1590px) Image search: [Google]

1MB, 1704x1590px

>>33909193
>1/3 a pound if you're lucky
That's not insignificant to me, I like to pull off any extra weight I can for normal shooting. I can certainly keep my lighter guns stable for longer than my heavier ones. And that could make up for up to around 8-10rds in a mag.
Just some basic measurements I did on mag weights alone.
----45rd--30rd---10rd
545-------1.1----.4
556-1.5--1.1----.4
762-------1.5----.7
308---------------1
54r---------------1

>>33908335
A small number of the kits got the trigger guards mixed up with Rguns' AKSU kits. If you post a front view of the mag release I can tell you which it is. Or a closeup from any angle really, they're pretty distinctively different.

As for the correct pistol grip, I know the popular knowledge dictates that the 88 kits should have matte pistol grips. But if that were the case, why did the 88 kits come with shiny pistol grips? These kits are unissued, untouched. They wouldn't replace all the pistol grips just because. IMO the dates are wrong. Tantal and the other buffs have been wrong before. I seem to remember them actually being confused by the pistol grips because it stood in conflict of the popular knowledge at the time.

>>33909193
>>33909179
Triangle is 7.7oz, poly is 11.7

>>33909257
With the triangle being made of steel, I always assumed it'd be heavier than polymer at least.
Interesting.

>>33909257
>But if that were the case, why did the 88 kits come with shiny pistol grips? These kits are unissued, untouched. They wouldn't replace all the pistol grips just because.
Did they all have shiny grips or just his? Maybe True Black Anon's is abnormal for having a shiny grip? Would it be considered incorrect if he did swap grips? I mean it's just a grip and you can go back and forth no problem, it's not like he's doing anything permanent.

>>33907600
At this point m92 because you can still get them. Dracos go for crazy money now. M92 might be a bit lower quality but not by much.

File: IMG_8498.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>33909124
Wood is love wood is life

>>33909270
When you pick them up you can easily feel the difference. I need to weigh wood as well, and the trunnions to compare weight there, because the folding stock trunnion has more steel to it.

>>33909284
I can't remember if any came with matte grips but it seems the majority came with the shiny ones. Personally I also think the shiny looks better. I don't wanna make any claims though because I'm not sure on this topic.

>>33909307
Your barrel pin looks fucked in that photo.

>drum shipped yesterday
>from Minneapolis, 6 hour drive from me
>delivery day Thursday

What are they doing with it

>>33909369
Starting a band maby ?

>>33909364
It's plum coloured.

>>33909387
The hole looks egged out.

>>33909398
Oh. It's not egged out. I'll take a better picture when I get home

>>33909413
I believe you, like i said it just looks fucked in that picture.
>>33909307

>>33909422
Yeah. It was probably just the angle or maybe the lighting.

>>33909257
Could they have just had a big stockpile of shiny grips they had made before switching to matte and just grabbed one at random when building the rifle? It's not like as soon as they switched to matte all of the shiny grips they had made disappeared. If the dates are wrong and shiny is correct for 1988, where does matte fit in? That leaves only a two to three year window from 1988 to 1990-91 when we know they switched to black for matte to have become standard

It's not like I'm gonna get rid of the grip, I can swap between them whenever. It's a really nice looking NOS shiny grip, I'm definitely gonna keep it because it's really pretty looking. In person it looks like it's made of hard candy or something

Also what did I do to make you call me a double nig :'( how have I angered thee

>>33909377
Har

>>33909439
You spit my load instead of the usual swallow.

>>33909439
1988 was the transition year for gloss to matte grips, if memory serves. Gloss plum was made from 1985 to 1988, so it's very plausible that it was just old stock they threw in with that rifle. You could probably get away with either.

>>33909439
They could have. But with hundreds of these 1988 kits sold, it goes beyond just coincidence.

Here's an idea on what could have happened. The plum material used in both the shiny and matte pistol grips is the same, I think. The difference is in the texture of the walls of the mold used to make them. When a new mold gets made, the old ones don't just get thrown out. This became evident to me when I started collecting 74M stocks and studying the differences. So perhaps matte plum grips were being used in 1988, but shiny ones were also still being made.

You know I'm just joshing babe

>>33909453
>not putting my trip into an insecure tripcode miner and burning your CPU out over the span of several weeks to get a insecure tripcode that looks identical to mine except with only one exclamation point
Why do you think I settled on a tripcode that hashes to CNN, because it's recognizable you triple nigger, your attempt is weak

>>33909514
> tripple nigger
Oh chimpy, why you so angry all the time.

>>33909682
>>33909514
Samefagging this hard

>>33909737
What a fag.

>>33909453
Dats gay yo

>>33909501
See i always thought the year was 1986 when they transitioned. Any of the grips could be considered correct for the rifle, Ive read a few stories of Soviet conscripts in the Soviet Afghan War worried that polymer and Bakelite grips were fragile and could break and shrapnel into their bodies from an explosion and that if that happened they couldn't get detected from an X-ray, so they'd search out wood pistol grips to put on their guns to ease their minds about that. Kinda silly but I've read more than one account about that

>>33909514
This right here is one of the biggest reasons why I like AKs from a historical perspective, things are always being learned or proved wrong or corrected with these guns. There's always something new to learn about something as insignificant as furniture color, and there are always thing being discovered that disprove or at the very least contest things that are believed to be fact. Nearly everything is conjecture and there is always new stuff coming popping up that twists things up

Do you happen to know the general ratio of AK74s vs AKS74s that were produced at this period?

Also your burner email name being Anderson Cooper made me kek and I thought it was clever with your trip

>>33906108
>>33908194
I found your video and no homo but you sound cute.

>>33909943
Dats gay yo (but t-thanks)

any .308 VEPR owners here?

just got one and so what single mag pouches do you guys recommend for the stock 5 and 10 molot rd mags as well as the CSSPECS 20 rd mags?

File: PSVgMyW.jpg (166KB, 980x752px) Image search: [Google]

166KB, 980x752px

Anyone own a polytech legend here?

File: 20170509_144304.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

How do I go about cleaning this, or am i already fucked?

>>33910074
I used a file and a screwdriver on mine

Go or no go
https://www.classicfirearms.com/paprifle-664

>>33910074
Spray solvent on it and scrape it off. Thats what do

File: image.jpg (3MB, 2448x2448px) Image search: [Google]

3MB, 2448x2448px

Recent shot of my 74

I bought a Baltic war npap furniture set, and mine came with a sticker. I am thinking, it is simply too good to be true! What are the odds that someone would modify a historic artifact like that to give it artificial value? I am thinking either I got really lucky and got a handguard that was used in the war by a young conscript who added a personal sticker, which would be really fricking cool, or, the person packaging it added it to make it seem unique. The sticker is worn.

File: 74muzzle2.jpg (580KB, 1059x1002px) Image search: [Google]

580KB, 1059x1002px

>>33910074
It's a waste of your time.
Once it's thick enough, tapping it with a sharp pick will take it all off in large chunks and leave you with a clean muzzle. And it's very easy to do.
Pic related is a short shooting session later. So like I said, waste of time.

>>33910088
Unless you live in Commiefornia, why would you want a single stack rifle?
No.

>>33910146
>yeah dude, just hit your muzzle with a sharp pick

File: 934hg1.jpg (144KB, 1023x682px) Image search: [Google]

144KB, 1023x682px

>>33910116
Stickers were an extremely common decoration in that time and place.
Gave their rifle a bit of personal touch.
They came in packs of gum, so I've heard.

So when opening a pack of gum, the soldiers would often just throw it on their rifle.
What is the sticker?
>90210 was fairly common, as were naked women.

>>33910311
Have you ever tried cleaning that stuff? It's like a rock. Good fucking luck doing it gently

>>33910074
Chisel

>>33906093
>>33906101
How are you managing to hit 922R compliance with an imported barrel, imported furniture, and I assume an imported bolt carrier as well? Receiver, trigger group, and piston are 5, I assume you're swapping the pistol grip or muzzle device?

>>33910395
922r? lol

>>33910395
> 922r
What are you gay ?

>>33910324
one of the teenage mutant ninja turtles

do you guys fuck with the an94

i remember using it back when i played fps games

File: IMG_2635.jpg (2MB, 4032x1189px) Image search: [Google]

2MB, 4032x1189px

>>33910395
You fail instantly worrying about 922r compliance. Your faggotry is wonderful.

Really? Are you fucking 18 or younger?

Photo for reference, exclusively non 922r compliant, no USA made parts here. Come at me bro.

>>33910425
Doesn't exist in the US. Deacts in RU have been fondled but very few have ever fired one.

File: atf-da-18596306.png (28KB, 254x186px) Image search: [Google]

28KB, 254x186px

>>33910428

File: gwg39.jpg (327KB, 831x1051px) Image search: [Google]

327KB, 831x1051px

>>33910395
shhhhh

so i see parts kits for sale but they never have a receiver to them... and people say usa made aks are actual garbage so would i use the usa receiver or would i find a foreign one

File: 3F43F07E00000578-4413582-image-a-23_1492241182547.jpg (146KB, 962x643px) Image search: [Google]

146KB, 962x643px

>>33910477
My soon to be dead dog awaits it's fate.

>>33910324
I remember as a kid visiting family in Jordan in the 90s buying shitty gum just for the stickers even though I hate gum with a passion.
All the cool kids would put it on their bikes and notebooks.

File: 18222078_10210958170404010_7334893620548916461_n.jpg (45KB, 600x726px) Image search: [Google]

45KB, 600x726px

>>33910541
Childers, Nodak, Turbothis, etc... all good USA made receivers. More to be had also.

>>33910596
The cooler kids put them on their M70s

File: IMG_8630.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

The Izhevsk stock arrived today. Now my rifle has matching furniture as well as the build being completely finished now

File: IMG_8631.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

Here's the barrel pin hole for the anon who requested it. It has always been like that since I purchased the kit.

>>33910588
those mags look awfully fat

>>33910625
Too bad all I could get over there was a beat to shit STEN that still functioned.

what happened to the one anon whos wife work at the nail salon and he had a pic of a shit ton of aks in a bathtub

also what happened to daewoo

>>33910723
Nigga im here just don't trip.

>>33909215
But I'm not a ricepicking poorfag stuck using whatever the chink government throws at me

>>33907598
It's an Interarms rifle I refinished

>>33910723
Gook wife anon?
Im sure hes still here.

>>33910680
At least their guns are better fed than their people

>>33910723
I'm not sure if gook wife and bathtub anon are the same people but they're still around. Daewoo just doesn't trip anymore and sold his Daewoo. I'm curious, how many akg regulars are there?

File: 3F43F41300000578-4413582-image-a-49_1492243855042.jpg (107KB, 962x637px) Image search: [Google]

107KB, 962x637px

>>33910680
They are quadstack mags that is why.

>>33910740
why not
>>33910944
is gook wife legit a gook wife because i remember a thread where the guy that posted the bathtub pic was say he did landscaping and his wife did nails so she could be a gook by coincidence

>>33906108
Thanks for posting pics of this kit last thread, I've been wanting one and it was nice seeing a few pics of parts from it.

I'm wanting a kit not to build but specifically to sit on and gain value over the years. Are these 88 kits worth it for that reason? They're easily available now so they don't seem valuable in that way right now. I'm not sure if I should buy one or find another year instead.

>>33909887
>nearly everything is conjecture
Exactly, it's not like Izhmash had a press conference every time they changed every little thing. This is all observational. The experts have been wrong many times.

I really don't know what the ratio is. It seems that fixed stock rifles outnumber folders by a significant margin. But if you check out pictures from Ukraine, which are mostly Soviet produced 74s, there are significant numbers of folders out there.

>>33910974
>>33910974
""""""""""""""""quadstack""""""""""""""""

fake ones

>>33911071
She's a legit gook. He said she has family in Vietnam and that they plan to buy a house there in a previous thread.

>>33911175
Any Russian kit will gain value at this point. I bought my 1983 kit in May 2014 for $665. There's currently a similar 83 kit on Gunbroker with an added sling and US made barrel being sold for $1,295. The only reason the '88s haven't had similar price jumps is because Rguns still has some, whereas they ran out of '83s a while back.

>>33910074
not even worth your time cleaning, it's not impeding function in any way. it's just loose tolerances trapping carbon, you can clean it bare then it will be back to where it was 50 rounds later

but yeah just slather in solvent, give it a minute or 10, then chisel it off without touching the barrel lips

>>33910974
Those helmets look like airshit quality.

>>33911198
>conference
More of a quadstack that I bet you will ever own.

Also I will take a fake NK quad any day. Some cool fucking history there.

File: 1488250174539.jpg (171KB, 750x631px) Image search: [Google]

171KB, 750x631px

>>33911309
I mean it's NK does anything surprise you when it comes to NK? They are king trolls.

>>33911243
Gook wife guy, you are the one with the 83 kit that should be finished soon?

I got my kit a few weeks before they ran out, so glad I did.

>>33908335
>I like matte better
So if you had a choice between a nice shiny flecked Tula plum mag and a late Izhmash matte plum flat purple mag, you'd take the latter?

Nigger what is wrong with you?

>>33908679
AK9 handguard

>>33911341
No, I'm not gook wife guy. I'm "patiently waiting forever for any firearm work" guy, apparently.

>>33911341
>>33911243
Gookfoot is not here right now. You might find him in miata threads on /o/

File: 1384607936302s.jpg (8KB, 161x250px) Image search: [Google]

8KB, 161x250px

>>33910944
>I'm curious, how many akg regulars are there?
Probably a few dozen regulars.
There's usually at least 50 posters every thread.
I'm on almost everyday unless I have women to attend to.

>>33908963
Sorry to ask again, but anything?

>>33911436
Get it and shut up
>>33911430
Bolt action AK btw

>>33911416
kek

>>33911175
Like >>33911243 said, I'm sure they'll go up once RGuns runs out. I honestly don't care about the value of this kit though, 1988 rifles are my favorite AK74s and that thats why I bought it. It could have been the rarest kit or the most common kit and that wouldn't have made much difference to me, I just like this era of AK74 and got what I wanted

>>33911187
>But if you check out pictures from Ukraine, which are mostly Soviet produced 74s, there are significant numbers of folders out there
That's what got me thinking about it. I always assumed fixed stocks were by far more common but there have been a lot of folders in Ukraine that got me more interested in finding out

>>33911366
From a personal preference standpoint between those two yeah I like the late flat purple matte ones more than shiny speckled ones. My favorite plums are the very dark purple matte Izhmash plums. From a value standpoint then yeah I'd take the shiny flecked Tula but I'd rather have what I like than what is considered more valuable

File: Beryl and saiga rain.jpg (3MB, 1681x2988px) Image search: [Google]

3MB, 1681x2988px

>>33910944
I still lurk but I've been really busy lately.

File: C-gogRYXgAEb-IG.jpg (58KB, 600x938px) Image search: [Google]

58KB, 600x938px

>call for an update on my '83 build
>"another month"
I know you can't rush art, but I'm gonna miss my build's third birthday at this point.

A polish akms century build popped up locally and I've iched for another underfolder. Are these decent builds? Would cash and trade totaling aprox $500 be considered low balling?

File: prince.jpg (2MB, 3131x2263px) Image search: [Google]

2MB, 3131x2263px

>>33911893
Depends, a anon on here has one and likes it tho.

>>33911919
That's a complete build, it looks great but I have a hard time spending that cash when many combloc options are in that range or better. I had a npap df, but the axis pins started to grow so I ditched it. This limits my options to overpriced bulgy builds, sketchy DDI offerings and century builds like the akms and ab2t. Wasr not included due to stock angle.

File: DSC_0043.jpg (2MB, 3483x1876px) Image search: [Google]

2MB, 3483x1876px

>>33911973
Well i was to refering to I. There is another anon on here with a century built akms. He said it was pretty nice.

>>33912207
*not

>>33912207
Gotcha, thanks. Sometimes the trip makes it easier

I'm going to keymod my rifle. Whatcha gonna do about it?

>>33912487
Laugh when you drop it and it breaks.

>>33912487
MLOK is better

>>33912487
Tape is better.

>>33912487
Chewed up bubblegum is better, plus you get stickers to stick on your rifle.

>>33906014
>tfw your gf doesn't like guns
feels slightly bad man

>>33909160
I'm from washington and this has never ever been an issue for me. You realize you're not supposed to have bare unfinished wood on your rifle, right?

>>33912748
Hes just looking for ways to make rifles less functional.

Well at least you still have a gf unlike a certain tripfag in this thread

>>33912766
Meant for
>>33912701

>>33910395
Fuck off

>>33910425
>>33910541
The fuck is this retard doing here?

>>33912766
>Well at least you still have a gf unlike 90% of posters in this thread
Fixed

File: 1372555367231.jpg (98KB, 645x773px) Image search: [Google]

98KB, 645x773px

>>33905975

>dropped my AK in the mud again and have to buy a new one

>>33911588

>"MOM! Where is the spray bottle??"

File: Plum.jpg (1MB, 2988x1681px) Image search: [Google]

1MB, 2988x1681px

>>33912963
Kek, I wish cared enough to go through that much trouble when taking pics.

>>33912748
The rifle was a c39 so take that as you will.

File: 1487640845456.jpg (234KB, 2048x1152px) Image search: [Google]

234KB, 2048x1152px

If you guys are missing gookwifeanon I save a bunch of his pictures so I can LARP him. I'll also talk about my alcoholic family and why I use that as a rationale for never having children.

>>33913115
His wife is ugly af

File: 1487666670853.jpg (3MB, 4160x2340px) Image search: [Google]

3MB, 4160x2340px

>>33913115
Wow, yeah, my family has a lot of shitty people and I read some meme article that talks about it being genetic. Oh you're a racist calling me a cuck? Don't you know behavior isn't determined by genetics?

File: 2 piece 12ga and Slav .45.jpg (1MB, 2954x2083px) Image search: [Google]

1MB, 2954x2083px

Am I the only one weirded out by people who save random pictures from other anon's

File: 1487667167090.jpg (305KB, 1194x1152px) Image search: [Google]

305KB, 1194x1152px

>>33913133
I'll also use the autism of Hapa children as a rationale for not having kids. Also I think my wife doesn't mind not having children or that at some point I want to move back to Vietnam. Plus I can only relate to people back in Vietnam because I'm a loser and as a foreigner there is barely just elevates my social status enough to make friends

>>33913145
>>33913133
Anon I think it may be you who has the autism, this is not normal behavior. Why have you been doing this?

File: 1487667295864.jpg (27KB, 451x800px) Image search: [Google]

27KB, 451x800px

>>33913145
Yeah, I told her to stop dying her hair red because it's retarded, etc. She's never really happy in my pictures but I just ignore that because I think after my other long term relationship it doesn't matter. In fact I've explicitly said on this basket weaving bonju that I have everything set up to leave her if she fucks around one day because I don't really trust anyone.

File: 1487751472288.jpg (466KB, 2048x1152px) Image search: [Google]

466KB, 2048x1152px

>>33913154
I ran out of things to parrot but just a reminder that I, gook wife anon, am a despicable sad man that is too old for moping around like a faggot about his ex, his family, etc.

>>33913154
Korean girls like dying their hair red for some reason.
t. Anon who banged a gooks for a while

File: 1487751536517.jpg (677KB, 2048x1152px) Image search: [Google]

677KB, 2048x1152px

>>33913142
>>33913152
Have a (You). I think this is the last picture I have saved.

>>33913173
Her face is just to fucking fat

>>33913168
She's Vietnamese but yeah, gooks and nips like to. I've never seen a Chink do it but then again how would I know? Lots of foreign students at my university. Very not fun.

File: female gook.jpg (106KB, 416x600px) Image search: [Google]

106KB, 416x600px

>>33913177
You can tell she's already transitioning from "Cute ageless gook" to "old cat fight voice"

>>33913173
Seek help

>>33913173
>>33913164
>>33913154
>>33913145
>>33913133
This is some next level autism

Do people really have nothing to do but get mad over another anonymous poster on the 8/2 Chan?

>>33913185
Fuck off your normie piece of shit. This place isn't or you. Bullying is part for the courts.

File: image.png (610KB, 543x631px) Image search: [Google]

610KB, 543x631px

>>33913142
I'll save other people's pics if they're really nice pics or if they're funny, like those WASR onna kayak pics or Chimps' bake art

This guy is my doppelgänger and looks just like me from this angle. It bothers my wife whenever I show her

>>33913189
>fag makes a name for himself by incessant blog posting
>surprised when someone takes it to the absurd and also happens to have an autistic memory so he remembers almost every interaction he's had

>>33913190
>part for the courts
Get the fuck outta here Ricky

>>33913199
Yeah, it really freak my wife out how much I look like that guy. When I showed her we was uncomfortable. Thanks for reminding me.

>>33913204
It's a dodgy dodge world and a pence on a cent is nothing to a dollar on a hollar

>>33913207
Yeah me too thanks for thanking him for reminding me.

>>33913199
Memes and arty pics are one thing, I just mean like random range pics or selfies or something. It's just autistic

>>33913201
More like surprised you're literally so autistic you can't ignore a text post in the slavshit general of the weapons board on a dying gook website

>>33913201
>>surprised when someone takes it so personally and also happens to have Asperger's so he remembers almost every interaction he's had due to being so asshurt over one anonymous poster's commentary

>>33913231
>>33913229
I'm really not sure why you think I'm assblasted.

>>33913183
Asian women should only be dated young

File: literally you fam.jpg (51KB, 398x354px) Image search: [Google]

51KB, 398x354px

>>33913253
They should be avoided in general

File: rly tho.jpg (336KB, 673x680px) Image search: [Google]

336KB, 673x680px

>>33913245
>have a bunch of his pics saved
>spend a bunch of time larping as him
>probably the same dude who used to always rant anytime he posted ever too

Oh /akg/ you make me laff! I really needed it because UPS hasn't delivered my barrel yet and it made me sad. I also need to go grocery shopping today. Eggs, milk, cheese, the usual. Long day at work so it won't be til later this evening. When I'm done with all of that I'll come home and post more. I've got so much to tell you about my day today!

File: 1344840419972.png (34KB, 288x149px) Image search: [Google]

34KB, 288x149px

>>33913270
You almost had me convinced

>>33913270
>tfw signature required for delivery

>>33913270
We metablogposting now

>>33913296
>tfw signature required so they walk up to your door with a "we missed you note" instead of trying to deliver even tho ur obviously home

>>33913323
that ar15 is fucking ugly

File: image.jpg (41KB, 450x180px) Image search: [Google]

41KB, 450x180px

>>33913297
More metablogs
More power

>>33913339
shit taste

>>33913316
>tfw sister is gonna be home but probably won't sign for it

>>33913347
>lurking /akg/
:^

>>33913350
>tfw usps taking an extra three days now to deliver svd pad and will probably delay even longer

why does /akg/ hate asians so much?

>>33913375
If it ain't white it ain't right

>>33913268
>he manages his time so poorly he doesn't have at least an hour a day for LARPing online
lmao

>>33913363
I saw it on the front page

>>33913402
It's ok. I understand the allure ^)

>>33913394
>spending your time on internet autism drama instead of training
You don't REALLY do this, right anon?

>>33913410
>instead of training
Yeah, fuck Jews

File: 8602529945_2b68abfb31_o.jpg (608KB, 1000x380px) Image search: [Google]

608KB, 1000x380px

Where can I get a wood handguard for my 74 like pic related

File: 1462952686234.jpg (2MB, 7242x4000px) Image search: [Google]

2MB, 7242x4000px

>>33913410
>he "trains" by dry firing at a lamp
Lmao

>>33913421
Did you try the internet?

https://www.apexgunparts.com/rifles/ak-47/ak-by-part-type/ak-furniture.html

http://www.gunbroker.com/item/644185758
Loooool

File: 20170421_154934~2.jpg (1MB, 2331x2268px) Image search: [Google]

1MB, 2331x2268px

>>33913476
500$, top kek.

>>33913476
>mold
>flaked to fuck
You don't really think this is just a NORMAL plum right?

>>33913432
>>33913414
>they own firearms that they can't use effectively in any real capacity
lol

File: image.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

Dang /akg/ you pissy af rn

Gotta start blogposting harder to trim the fat

>UPS confirmed barrel was delivered
Whew I was nervous

>>33913490
f i v e h u n d o

>>33913490
I'm sure your tactical hole punching classes will help you get some McDonalds

>>33913498
This is a RARE and AUTHENTIC flaked MOLD F I V E
>the mold 5 means 500

>>33913503
You right I should stay home and just imagine myself fighting waves of muzzies rather than actually shooting my guns

>>33913514
Unlike you a I dont fantasize about killing black people

>>33906038
F L U F F Y
L
U
F
F
Y
T A I L
A
I
L

>>33913490
>>they own firearms that they can't use effectively in any real capacity
>he thinks shitposting inhibits this somehow
lmao

File: cat.jpg (3MB, 2340x4160px) Image search: [Google]

3MB, 2340x4160px

I have a question for /akg/... If you could legally register and convert one of your AK's to full fun/select fire, which would you? It'd be treated like and pre-86 transferable MG but you wouldn't be able to just up and sell it. It has to be an AK that you currently own or have at least paid for.

>>33913323
How do you like that lower, and is it worth the price? I'm left handed and looking for an SBR lower candidate.

File: 78.png (52KB, 557x416px) Image search: [Google]

52KB, 557x416px

What electronic sight would you guys suggest for my verp12? Rifle sights are just too weird since I grew up on bead sights for shotguns. I can probably only hit 60%-70% of my clay pigeons when I go out shooting with the vepr.

>>33913476
>http://www.gunbroker.com/item/644185758

LOL Read the description

>The so called "king of flakes"

Who the fuck calls it the "King of flakes" aside from that asshole? haha

File: beryl markings.jpg (864KB, 1632x1224px) Image search: [Google]

864KB, 1632x1224px

>>33913578
Absolutely. My Y stamp needs some love.

>>33913476
>AKS-74U sub-mashine guns
M8 pls

>>33913630
How much do you want to spend? I'd say just go with a holosun

Why does BakesRus act like he's a badass know it all when he comes around?

>>33913721
Because he is a tripfag, they are just shitposting retards.

Are South Korean 7.62 drums worth looking at?

>>33913752
no

Sup /akg/?
Im built a few ARs and now Im looking to turn my hand to AKs.
I have access to the tools of my workplace (A machine shop) and would like to build as much of the rifle as I can. I know most guys just build receivers but I would like to challenge myself and see if I could build as much of the rifle as I can myself.
So, Im trying to find as much technical data on the stamped AKM. So if any of you guys could advise me on where to fine relevant data, books, websites, pdfs etc. It would be greatly appreciated. Also feel free to ask me any questions.

>>33913645
Huh, might not be bad. I'm kind of scared of cheaper red dots since when I first got into shooting with red dots, they would lose zero easily and piss me off. That's what turned me off to electronic sights for the longest time.

I was actually thinking of going with trijcon red dot. I'm not sure what the cut off price point is for red dots when they stop becoming shit.

How high would I want the red dot and how far forward or back would I want to mount it on the vepr?

File: 20170315_114357~2.jpg (879KB, 2111x2117px) Image search: [Google]

879KB, 2111x2117px

>>33913525
Sooooo flufffyyyy

>>33913819
If you have to ask that stuff you don't have what it takes to build an AK.

>B-but I have access to a machine shop!!
Oh cool, your machine shop has a rivet jig that has literally zero other uses except to specifically build AKs? Talk about a jack of all trades machine shop.

Comparing """Building""" ARs to building AKs is like comparing Lego Duplos to genuine manufacturing.

>>33913492
Post a pic of the barrel, I wanna see it.

>>33913832
If you can afford the Trijicon go with that then, and it doesn't really matter where you mount it. Just put it where you prefer.

>>33913904
Why, it's just a barrel. its nothing special :^)

>>33913270
>>33913296
>>33913316
Holy hell this

File: i-2123.jpg (82KB, 600x450px) Image search: [Google]

82KB, 600x450px

>>33913721
>>33913731
Readily admit I don't know it all but thanks for the thoughts. He is correct I shitpost to piss those that care off. I hope it's working right now.

But yeah I am a dumbfag as much as the next, I know some shit but no where the level of some people here or else where.

File: Bags.png (652KB, 538x615px) Image search: [Google]

652KB, 538x615px

Bags came!

>>33913832
Have you checked out Aimpoint? You can find them used for sweet deals. I just bought a T-1 w/QD mount for $350. Trijicon is also awesome.

>>33913988
>T-1 w/QD mount for $350
Thats actually pretty damn good deal, lucky you

File: 13549598_1790940534454850_1086002350_n.jpg (129KB, 750x887px) Image search: [Google]

129KB, 750x887px

>>33913636
>The so called "king of flakes"
That guy has no clue.
This is flakier than that one

>>33913637
Neat. Kinda disappointed that you're my only (You).

http://www.gunbroker.com/item/644135335
Thinking about offering Sheepdog a straight up trade of my M45A1 for this krink

IF he still has the one that doesn't have the PG reinforcement plate on it

>>33914042
Holy shit those flakes. Is that yours?

>>33914042
>Mold 9
That's a $900 mag you dummy

>>33913988
No, not yet. I'll have to do some research. Thanks for the suggestions guys. I just honestly haven't seen any sights mounted on a vepr yet.

File: IMG_0535.jpg (2MB, 3609x1689px) Image search: [Google]

2MB, 3609x1689px

>>33914016
The Aimpoint was NIB also.
Picked up a Leupold Mark 4 2nd focal plane for around $150 a few days ago. TX has deals if you are on the look out.

>>33914174
Look into RS Regulate for the side mount system. If you have the $ that along with an aimpoint will set you for a uber long time.

>>33914237
Shit tier except for the Aimpoint.

>>33914237
Nigga that is awful

>>33914237
nigga wyd

>>33913142
Man that gun was fun

File: Screenshot_20170509-190554.png (2MB, 1392x1415px) Image search: [Google]

2MB, 1392x1415px

What kind of 5.45 is this ?
This is the only pic i have currently.

>>33914360
Is that 8mm Maurser?

>>33914360
The kind you don't want to shoot.

File: IMG_2925.jpg (897KB, 3264x2448px) Image search: [Google]

897KB, 3264x2448px

>>33914326
Hopefully that new RO can get 3gun opened up there. I think I'll have to start attending trap/skeet there too
>workin on combo too rn

>>33914360
That's 8mm mauser homie

File: christmas-theme-ig3[1].jpg (132KB, 749x468px) Image search: [Google]

132KB, 749x468px

>>33914360
Other than the christmas theme, it doesn't look like 545x39.
Looks like surplus 8x57. Especially with that stripper clip.

>>33914389
>>33914396
>>33914429
>>33914436
Ad says its 69grn 5.45x39.

>>33914360
The +P+ variety

File: P1070373.jpg (1MB, 1581x1367px) Image search: [Google]

1MB, 1581x1367px

>>33914454
First of all, the shape of the case doesn't even begin to mimic 545x39.
Whoever is selling it is wrong then, or posted the wrong picture.

>>33914454
In a box with 5 round stripper clips? Lel

>>33914454
Put it in an AK mag then
>5.45 clips are 15 rounds not 5 tho

>>33914454
Well then the picture is wrong. If he's actually selling 69 gr 5.45, it's either the shitty RAS ammo or the Wolf that's loaded way too hot that could kb your gun

>>33914470
>>33914475
>>33914479
>>33914484
Ah good to know. This is why i ask.

File: image.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

Took some dumb pics for my own amusement of my plum furniture to compare my matte set with the set that came on the kit and figured I'll post them because why not

Top is the set that was on the kit

>>33914503
Are there mold numbers on the matte grip?

File: image.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>33914515
Yeah they're on the opposite side though

The matte grip has an ink stamp on the front too that gets hidden by the trigger guard but I didn't take any pics of it

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>33914553

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>33914577
It's making me want to put plum and triangle back on my SLR

File: IMG_0565.jpg (374KB, 1024x554px) Image search: [Google]

374KB, 1024x554px

>>33914603
Before plum furniture was adopted, the AKS-74s used slightly different colored polyamide grips with wood handguards

Always wanted one of these pistol grips. This rifle is a kit build from a 1982 AKS-74 that has floated around between owners for several years. It is so sexy. There used to be a video on YT of it being shot but it has been removed and the guy's channel is nothing but commercial planes now.

File: alex_wtf.jpg (11KB, 261x238px) Image search: [Google]

11KB, 261x238px

>>33913115
damn that is one ugly gook

File: 1383350161355.jpg (18KB, 400x400px) Image search: [Google]

18KB, 400x400px

>>33905979
>http://pastebin.com/YdEkhdva
Ey fuck u mang I like my DDI AK74

>>33914240
>>33914255
>>33914287
The hate tastes good ;)

I put it together to partially inspire the wrath of fucks like ya'll, mission accomplished.

>>33914661
Thats what Ive been saying all this time, why do Trips like to post there ugly ass wives?

File: oh no.png (45KB, 404x404px) Image search: [Google]

45KB, 404x404px

>>33914680
>haha i have an ugly gun u got trolled
?

File: rubber_bandage.jpg (285KB, 1280x887px) Image search: [Google]

285KB, 1280x887px

>>33914683
well it seems a lot of low test betas go for asian women, and unsurprisingly they feel a need to try to act cool by posting pics of them then. seriously nobody gives a fuck about your family or wife on here, especially if it's some ugly gook.

>>33914680
>lol watch this guys I'm gonna spend $2000 to troll some nerds

>haha I got em good

>>33914360
that's 5.45 XL

File: 41401_100000050448157_3224408_n.jpg (14KB, 200x355px) Image search: [Google]

14KB, 200x355px

>>33914701
>>33914721
Stop responding to the obvious troll

File: IMG_0677.jpg (12KB, 304x171px) Image search: [Google]

12KB, 304x171px

>>33914680
Black people taste good to flies also.

>>33913887
You can't just stop posting cat pics. Makes me miss the last cat+gun thread.

File: IMG_7065.jpg (1MB, 4032x1325px) Image search: [Google]

1MB, 4032x1325px

>>33914721
Na friend I paid less than half that. Otherwise I would never buy, I don't pay full price on fire arms or parts ever. Sorry if you can't find good deals. =)

$150 Leupold Mark 4.

>>33914757
Some will never learn ;)

File: D051AE39DFA84CA9A1A7FCC1B4F6F5DC28000000096D2797354_tmp.jpg (61KB, 606x538px) Image search: [Google]

61KB, 606x538px

>>33914941
That looks like dirty wart dick.

File: 20170324_175033~2.jpg (811KB, 2281x1766px) Image search: [Google]

811KB, 2281x1766px

>>33914849
Cats are best.

>>33915006
That is a very nice looking cat you have there

>>33914658
I didn't realize that those grips were different from a normal old dark Bakelite grip. I really do like the look of wood and Bakelite but I've never gotten around to picking any up for my SLR

Do you know how to identify the general time period black Russian furniture was produced? You've mentioned something about that. I'm curious about what time period my HGs and PG were made

>>33915047
Speaking of Russian black polymer, I've got two handguard sets and has a heat shield and one doesn't. Is there a reason for that?

File: 20170424_000445~2.jpg (900KB, 2198x2227px) Image search: [Google]

900KB, 2198x2227px

>>33915016
I love her.

>>33914988
Looks sexy to me. Shoots straight and far. Works as it should.

But thank you for the insight into your opinion.

>>33914407
Yea, I would have to buy another 12 ga since I sold both of them.
Nice. That's going to take a good minute

File: IMG_9058.jpg (1MB, 1632x1224px) Image search: [Google]

1MB, 1632x1224px

>>33913636
>>33914099

>>33915092
If 3gun rolls around and you don't have one by then I don't mind letting you borrow it so long as you got some shells

And yea I think I've been halfassing this MD for almost an hour now, steel is hard as fuck and I'm being extra careful since I'm right on top of the threads. Almost through tho

>>33915102
That's like $2000 right there.... You could charge one dollar a fleck

King Fleck - In the Court of the Fleck King

File: cheeseburger.jpg (18KB, 500x375px) Image search: [Google]

18KB, 500x375px

>>33915088
Looks like if you were to drop it down stairs it will brake, Almost like a laptop computer.

>>33915165
Or teeth

New thread

>>33915200

>>33915200

>>33915200

>>33906022
I need the AN94 in my life.

File: IMG_1047-1.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>33915006
Reminds me of my own cat, even has that same little black spot above the mouth. My father wanted to name him hitler, because the famous 'stash, but my mother was like "we are not naming this cat hitler", so we all settled on Adolf.
He was a big cat, but not really fat. While I'm not saying he was the most /fit/ cat in the world, I'm pretty sure he was fairly buff, as far as cats go.
>pic related, caught mid licking

>>33913893
You dont need a rivet jig to build an AK, I welded my first one together.

But seriously. You could have given some actual advice to the guy. Sure he will need to buy a few tools but if hes committing to wanting to build an AK he could become an AK guy rather then an AR fag.

>>33913232
As someone who wears ABU 5 days a week, I cannot for the life of me understand why someone would willingly wear that piece of shit uniform.