>DROPPED SPANNER IN ENGINE BAY
>IT DISAPEARED INTO ANOTHER FUCKING DIMENSION
FUCK THIS SHIT IM SO MAD HOW THE FUCK DID IT JUST DISSAPEAR WHERE IS IT
>>16563202
its either sitting on a frame rail or is resting on an engine mount waiting to jump out.
Also who even calls a wrench a spanner?
It's with all my lost 10mm sockets
>Changing oil
>about to tighten plug back into oil pan
>Drop spanner in oil drain pan
>>16563202
It won't help you locate it, but holy fuck will pic related change your life.
>Buy 98 Subaru Forester not long ago
>Working on it
>Notice tons of misc bolts/fasteners missing around the engine bay
>Remove under engine plastic cover to make template for proper bash plate
>Suddenly raining bolts and fasteners.
>>16563202
>>16563297
please stop calling them spanners
you're intruding on my safe space
>>16563272
MINE WAS A 10MM TOO WHAT THE FUCK
>>16563309
what does that do anon
>>16563328
>>16563202
>>DROPPED SPANNER IN ENGINE BAY
i've got a box of tools that were left in my car by mechanics....
doesn't make up for when you lost my dip stick
>>16563202
Strong magnet+duct tape+wood dowel
>>16563363
kek
>>16563363
made me chuckle.
>>16563465
I actually cant see it anywhere anon a magnet wont help
>>16563250
>Also who even calls a wrench a spanner?
bongs
>>16563297
I almost always have to fish out the bolt out of dirty oil when I change it
>>16564421
ausfag actually
>Dropped screw in dash
>oh fuck
>can't find it
>drive off
>shift
>hear a little something
>wat
>shift again
>wat?
>pull over, start popping trim off
>screw is wedged in the shifter linkage
>>16563309
>Dismantling intake manifold on NA second gen RX7 to fix sum sheeit
>two-piece intake, lower and upper halves, mating surface between LIM and UIM is parallel to ground
>have LIM on, replacing all vacuum lines/etc before UIM goes on
>remember completely trivial wire bracket that goes onto LIM with 10mm bolt, would have no effect if left unbolted
>drop into LIM
>1-day ship endoscope and bendy magnet grabber, retrieve
But I was about to lose my shit for a minute there
>>16563365
what kind of retard loses a diptstick?
>>16564451
My car has this weird fucking plastic trim under the engine. I have dropped the dipstick down there before while changing oil, since I just keep it out after checking and wiping when pouring from big ass jugs instead of 1qt bottles.
It magically landed sideways, just in front of the oil filter.
>>16564436
so an upside down bong
Screwdriver fell down the back of my engine and some how ended up finding its way into an exhaust heat shield. Had a rattle at idle for a while.
>>16563250
>Also who even calls a wrench a spanner?
Literally everyone outside of the US.
>>16563202
You spelled disappear two different ways. Both were wrong.
The fuck is a spanner?
>>16564515
You.
>10mm socket
>transverse V6 minivan
>>16564523
>His clickerhandle doesn't have a holdybutton for his squareyspinner-grabbers
>>16563272
8mm for me
>>16563272
>I dropped my only 10mm socket into my engine bay with the whole intake system off
>~50% of the bolts are 10mms
that was not a fun night
>>16563202
HERES WHAT YOU DO ANON
YOU PULL YOUR CAR OUT AND DO A FEW 100-0 STOPS
IF NO RENCH BUY NEW CAR
>>16563297
>waaah my wrench is dirty
Just blast it with brake cleaner and wipe it off you pussy
>not having extra 10mm sockets
You nobs know damn well the things are fucking cursed, if you can't go spend ten bux at Walmart for a set of backup sockets you deserve to lose it
>inb4 chinkshit tools
Go ahead and spend 80bux on reserve tools if you want
>taking me mums spark plugs out
>I6
>do first 5 easy
>last one is UNDER THE FUCKING DASHBOARD
>have to drop the spark plug socket in, then the extension, then plug in my ratchet
>then get a bendy magnetic stick to get the plug out
man i appreciate the ease of maintenance on 4 cylinders compared to 6 cyl
>Go at the local scrapyard with a list of what to remove.
>Work on the first engine (H25A) lose the 10MM socket in the worst place ever.
>proceed to curse
>Come.back home with 50% of what I was supposed to bring back