i want a meme on wheels to turn into a bit of a sleeper
mini or beetle,/o/?
>>16130132
get the beetle
mini engine tops out at 130 hp n/a
Beetle. There's no way you'll make a better sleeper mini than these guys.
https://youtu.be/7hCPODjJO7s?list=PLGSOZAHg1yQEatqhWza_ae83e313-GLTO
>>16130132
Beetle because RR not FF trash
if you are looking at mini here are a few spots where rust happens allot
battery box
rear sub frame mounts
roof gutters esp the corners
door sills and lower door seam
also the rubber springs shrink and loose their bounce
the stock wheel size for the mini is 10x4.5
12x5 can be put on but is the upper limit without making big changes to the wheel arches
because the sump is so low to the ground it can collide with curbs
one type of crash damage to look for is a bent front subframe
>>16130184
>that
>a sleeper
check out mcm's beetle
>>16130259
Minis always have arches, it's no big deal. The one in the OP probably has 5.5x10s
Beetle with a Subaru swap.
>>16130272
7.5 " disks fit in 10 " wheels iirc
but allot of people just get bigger wheels instead
the mini can be de seamed to give a 15% reduction in frontal area
and if you want a larger engine bay the clubman body style offers that
and is also cheaper due to its unpopular squire shape
>>16130163
might add a small turbo
>>16130184
not planning on going that far
>>16130207
noted
>>16130208
noted
>>16130259
noted
>>16130342
old clubmans look like shit
do you guys know of a cult website for parts just incase i need something?
something like rocky-road?
Superior
>>16130778
http://www.minispares-online.co.uk/
this sight is ok
the mini still has a large aftermarket
to the point that you could build an entire car including body panels and glass out of non oem parts
here are some parts that can be handy
http://www.minimania.com/part/C-STR644/Hi-lo-Type-Kit-Front--Rear-Budget-Kit-Mini--Mini-Cooper-S
https://www.youtube.com/watch?v=oKKB4IuWx30
here is a 1977 998cc that became bereft of its car 8 years ago
it was still working immediately after the crash and tried to pull the mangled body off an embankment
as of now it only runs on one cylinder and has some carburettor problems