>tfw previous owner didn't grease the slide pins
Seems like everytime i replace something it's 10x harder than its supposed to be.
Auto repair feels thread?
>>16082260
>doing spark plugs on a Ford
>the threads come out with the plug
it's ALWAYS the back cylinders
>>16082260
Drill it out and replace the caliper if you can afford to.
>>16082282
Yerp
>>16082282
Fuck man I had that problem on my ex's f150. Worse part is when you turn the ratchet too hard and it shatters, shards of bullshit fall into the cylinder.
>>16082286
Cant afford it, gonna try a torch on the bracket
>>16082288
fuck that really sucks. it got to the point where i welded a M14X1.25 plug tap on the end of an extension and kept a small box of thread inserts nearby whenever i did any tune-ups on the older triton motors.
>>16082314
that could work.
got access to air? get an air chisel and zap it out.
>16 previous owners
That's all I have to say
>>16082260
Slide hammer + vice grips. Also wire wheel once you get it out.
>>16082335
>when you know your girl is used goods but you can't afford better
> tracing a short
> it comes and goes when I wiggle a two-inch-thick bundle of wires where it goes through the firewall
>>16082388
fun times
>>16082288
TORQUE WRENCH
>>16082282
I always use antiseize compound and a torque wrench on my spark plugs.
Never had a single problem.
>>16082381
I've tried the vice grips as well, just had to buy a new bracket unfortunately
they sold me the wrong bracket.. back to autozone. Why does this happen?
>>16082515
unfortunately, not everyone does that.
>>16082260
I broke SEVEN out of EIGHT lugs on the driver's side on my Miats. That, in addition to the built-up stress of the shitty town and shitty schedule and shitty people I had to deal with in addition to my own incompetence, resulted in three dents appearing above the wheel arches.
>tfw the owner tries to replace their crank seal, but they crack the timing cover instead
I can't really complain about a 15 hour ticket though.
>spend 3 hours with a torch, mallet and screwdriver trying to get the slides out.
>give up, buy a new bracket and have it all back together in 10 minutes.
I should be less stubborn next time huh?
Never met a bolt that beat heat
>>16082260
>when you service your brakes but your front rotors still shit