/o/, I need your help. I tried changint the oil on my friend's

>>15886230
The tool at Toyota is 20$ you both are retarded

>>15886278
I know. Im not a toyota owner, so this cap was news to me. Is there a way I can use this tool even though the cap was damaged?

File: azu_osaka0047.jpg (28KB, 720x480px) Image search: [Google]

28KB, 720x480px

Special tool to remove the oil filler cap?

HAHA WHAT THE FUCK!

File: s-l300.jpg (8KB, 300x300px) Image search: [Google]

8KB, 300x300px

>>15886311
Its a thing.

>>15886329
Holeeeee shit.

The cucking is real.

>>15886336
How do people that cap off without that?

>>15886298

Not on the corolla's or any of them with the plastic caps, they are a tight fit even with the correct tool so once the cap is damaged its nigh impossible to get the tool onto it.

You will likely need a new cap, also tighten to 25nm, no further.

Its a 64mm 14 flute assenmacher tool at toyota. good luck with a autozone one, they torque it so tight at the dealership I broke the cheapass tool.

>>15886311
>>15886336

Also LOADS of manufactures have special tools for shit on the cars now, nissans have a dumb square oil drain, Holden Captivas need a offset 27mm spanner thing to get the oil filter cap because its under the intake manifold.

VW are covered top to bottom in stupid bolts and nuts

>>15886403
Looking to remove the damaged cap, not install it.

>>15886420

Big ass multi grips if its already fucked

>>15886420
Just buy the tool, hammer it on with a rubber mallet,and remove with a 15/16 or 24mm socket. Buy a new cap, get an oem filter for 5$ and a drain plug gasket and learn your lesson.

>>15886311
>>15886336
>>15886349
It's not the oil fill cap you spergs. It's the oil filter housing.

>>15886428
You don't have no clue what you're talking about.
You can't remove it with any kind of socket. It's bigger than the size of your hand. A new cap might run almost a hundred dollars.

>>15886461
notice I said buy the tool and hammer it on. If you buy the proper non cheap ass tool you must use either socket size. TOY 640.
I've done enough oil changes on my corolla and many others to know what im talking about.
A new oil filter housing is around 60 depending on your dealer pricing. Not my fault he fucked it up. Also I guarantee you will need a rubber mallet to get the tool off since its a tight fit.

>manual says tighten oil filter to just hand tight
>do it hand tight
>pisses oil out
>do it SUPREME GORILLA TIGHT
>doesn't leak

>>15886508
>weak grip strength

go do some curls faggot.

>>15886555
i still did it hand tight fagmaster i just went apeshit instead of milk bottle cap tier

>>15886230
A band wrench.
I used to work at Mr.Lube doing this shit all day. No matter how tight it is, you can probably get it with a band wrench.