AK General /akg/
Monumental Drum Edition
>Thread #396
Old thread here >>34867503
>AK Buyer's Guide
http://pastebin.com/YdEkhdva
>>34875099
nice!
will probably shoot the 104 again while i'm still getting the hang of things
going to make a pic of bring-alongs tomorrow
>>34875217
It's OK Daewoo, you just dumped your skill points into strength. U can b my fiter n e time bby
>>34875070
Top is bizon, bottom few I picked up random places.
>>34875195
Why waste time.
>this picture is actually so good
>>34875235
I'll be bringing this slice of meme magic as well. If there are any mags/parts/slings etc.. you and OC want me to bring just mention them. Bringing mosin with ww2 pu per OCs request. It was a pleasure shooting his FAL and M1 Garand
>>34875178
That is a monument of hate and racism and needs to be torn down. Also you maniacs with the gun encyclopedias.. that shit needs to burn
>>34875301
Damn, nice analysis. Can you post the full version of the ver.2 pic?
I sure wish I could play the AK game too bad everything good is fucking banned or overpriced.
>>34875454
AK market is pretty much ded
>>34875432
like dis?
Have that picture of the different hinges you have?
Just realized how many triangles I have now.
>>34875491
Oh that's a different pic. I just now realized that pic was yours. I didn't recognize the signature green crate. There's a similar pic with a bunch of stocks fanned out that shows a 74M folder with a solid (possibly 4.5mm) hinge.
giant AK's when?
https://www.youtube.com/watch?v=qs_M9yVZ3fE
new ak200 series.
https://www.youtube.com/watch?v=g-gAb6OW2P0
Aubtomatt 103.
>>34875583
Hmm, looking in folders now.
Those all the 1st style stock?
shit the above isnt the pic i wanted,sorry guys,let me find it
>>34875432
I'll give you my books when you check them out from my cold, hard bookshelf
COME AND READ IT
here it is in use by FSB
>>34875713
picture for ants?
>>34875734
He doesn't know, he's busy dumping the same 30 fucking pictures and Youtube links he does every thread for literally no reason.
>>34875742
its not THAT small..
>>34875679
Actually this one, with a screwed on hinge, is mold #2 and has a regular release button, and trapdoor.
>>34875675
>>34875683
>>34875691
>>34875698
>>34875713
These aren't even AK103s, holy shit are you really gonna image dump some fucking <25KB images in this general
>>34875705
I need to get a set of those.
All I have is this and the Grim Reaper.
>>34875766
He does it literally every night and has for the last 2+ weeks at least.
>>34875777
CoolFX is almost out of copies, if he's not out already. Friggin $200 though
>>34875782
It was funny when it was only a few images, this is ridiculous
>>34875824
>this is ridiculous
I'll leave it at that then,sorry.
>>34875777
Better hurry up on it then. There's apparently like 20 sets left stateside, and CoolFX isn't importing any more any time soon. The whole thing weighs like 20+ lbs, so while you can import a set direct from the Netherlands, it'll cost an arm and a leg.
>>34875766
Interesting, must be from the transition or something.
>give rpk barrel.
>>34875837
Just get some variety and decent size pictures
>>34875824
>CoolFX is almost out of copies, if he's not out already
Don't say that, I'm trying not to blow money in case Woo doesn't sell those chink bakes fast.
>Friggin $200 though
It's less than buying them directly though.
>>34875837
Not trying to be a dick, but pics like >>34875719 are so small they're not even worth posting. Also, there are bigger versions available, you can usually find them with a reverse search. See?
>>34875859
That's what Tantal told me when I asked about it.
>>34875879
http://www.coolfx.us/index.php?main_page=product_info&cPath=73_95&products_id=235%22
>4 left
Really, the big deal with getting it from CoolFX is the free US shipping. Shipping from overseas would be an obscene amount of cash.
>>34875918
Fug.
Well he's got 5 signed copies left, so if the unsigned ones go, the signed ones are still cheaper than shipping from overseas.
>>34875301
There are more from this set fyi. It's a good reference image.
After all the images I've seen, I'm under the impression the rail form the .410 is actually the second version and the one that looks like a mix between the current one an it is the first. Almost all the rifles with that rail have a ribbed top cover and the trunnion dates I've seen are always around 92. The rifles with the .410 rail have smooth top covers and sit around 95. If you out chimps have a different idea or conflicting info let me know.
>>34875766
This is p neat.
>>34875973
That is completely possible.
>>34875918
>Down to one right after you posted that.
Thanks, I broke down and got a set.
>>34876043
>>34876064
>>34876077
>>34876090
>Tfw Zasta validates your research
Some of those are helpful for the color fill project too lol.
>>34876064
>>34876090
Stottman's books have some good stuff in them
>>34876145
That color fill looks great if you did that yourself
>>34876145
ya boi, just wish I could see the year in more pictures.
>>34876148
that it does
Ok /akg/ I have a choice between two AKs, one is a 1992 century tantal with grey parkerizing and the side folder for 700, or what I'm guessing is a Bulgarian build on an elk River receiver with the plum furniture for 600, both are in 5.45. Plz help
>>34876228
Neither.
>>34876253
Oh...
>>34876308
That mako defence group shit is gross.
>>34876175
>That color fill looks great if you did that yourself
Yes, and your stamp of approval is greatly appreciated. The normal, bright white color fill people use looks terrible and out of place so I decided to try to replicate the original. Still working on it a bit, but I'll post the process when I'm done.
>>34876178
Would be nice to see more 94 and 95 models. Don't seem to be too many pics, at least that I can recall.
>>34876213
>Wood hand guards and black 5.5mm stock
This is my fetish.
>>34876397
>I decided to try to replicate the original.
How are you doing it? I'd honestly think white wax crayon + lots of CLP to "stain" it would work best if I had to guess.
>>34876366
Truly
>>34876397
looking
>prototype AK103 "apparently"
>>34876228
5.45 is pretty much a dead caliber friendo
>>34876533
It's more for the collection at this point with occasional plinking, not as a mainstay
>>34876543
Oh, I'd probably buy the bulgy if everything checks out on it.
>>34876561
Don't, it's built by literally who with a literally who barrel and literally who receiver. You're going to get a piece of shit rifle. Both of those are shitty options. Just save for an SLR-104FR.
Down the rabbit hole
Now this is hot.
Whats the little hook on the AK bayonet opposite the mounting ring for?
>>34876622
It's for the hand lanyard.
>>34876617
What brake is that?
>>34876651
Experimental 2 chamber
>>34876683
I wonder how that double brake worked. My understanding is the current 74 brake is so effective theres really no need for anything more
people wandering off with parts isn't new
http://gunmag.com.ua/white-kalashnikov/
Anyone have or tried an OKP-7? I love the look of it. It even allows cowitness.
>>34876590
Slr104s are shit
http://www.ar500armor.com/promotions-sales.html
Cheap targets! 6 month pay option.
>>34876945
you are shit
>>34876746
Why are they changing it for the bird cage flash hider then?
>>34876945
How
>>34877135
I hate you so much you fucking faggot.
WET
>>34877143
MOIST
Patent for the good AK12 ambi charging handle
http://www.freepatent.ru/patents/2529088
>>34877154
Looks a bit weak. I can see it breaking some time when you try to unjam the gun with a boot.
>>34877141
I'm just reporting his thumbnail-spamming ass. He's already used up something like 28-29 of the image posts for this thread.
>>34877154
That's neat. Does it just spin around on the piston?
>>34875754
is the one with the officers a binocular?
>>34877164
Maybe.
>>34877166
Yeah
Happiness
>>34877327
It looks like its leaning towards him to be pet
>>34877327
>>34875846
>$200 usd
I don't need it that badly.
Since I have no one else to tell
>just woke up from a weird ass dream
>starts with me homeless in NYC in the current year but now it's still an absolute shithole?
>running around at night
>trying to get from island of streetlight light to island
>turn a wrong corner
>only one block of light and then utter darkness
>notice an Asian chick that looks like the evil oriental henchman from an 80's movie is following me
>"fuck, she's gonna stab me"
>also know that if I keep going this way I'll run into a homeless guy that going to stab me
>cross the street and go back
>see Asian chick
>she has the knife out but we're in the light so she can't stab me?
>"Good evening ma'am"
>take a right once I'm back to where I came from a bit
>start running because their isn't an island of light for a few blocks
>try to find a hotel or motel to stay in until it's light out
>accidentally walk into one of the rooms, it's a shit hole, falling apart, probably smells velvet stuff everywhere?!?!
>go back and try to find the office
>ask the guy behind the desk if I can get a room for just 12 hours
>"yeah man... well that'll be a bit difficult"
>okay.png
>"how much a night thought?"
>"$800"
>lolwut
>the manager is there so I ask her why so much, if there's a specific reason
>I'm curious and not angry, maybe it's a historic hotel? Maybe there are better rooms than the one I saw?
>she starts crying
>"I-I just inherited this place and I don't know what I'm doing and-and, etc"
>then some 50-60 year cunt with short gray hair sitting in the breakfast nook thing starts going into "you JUST had to be an asshole didn't you? Wow!"
>she keep going
>lolwutwut
>wake up
Not really /akg/ related but have this instead.
>>34878281
*90's movie
>>34877060
Because flash suppression is more necessary in modern combat than recoil mitigation on a round that doesnt really need it.
I'm a stupid idiot where can I buy a beryl AK.
>>34878330
>Internet
>>34876861
>http://gunmag.com.ua/white-kalashnikov/
a good read
thanks
>>34876920
Don't get the 7, get the 77. The 7 had a weaker objective lens that would crack/shatter.
>>34876861
What?
>>34878960
What the fuck? XD
These are either russians pretending to be ukies or ukies have picked up 100 series AKs. Either way I thought these were sorta neat
>>34879029
Probably airshitters.
>>34879043
Ruski for sure.
>>34879048
Dunno, I just woke up and found them in the ukie thread. I'd pin the second one as russians before the first one tho
>>34877305
>bitches don't know bout my kalash
>strela tracking number shows up in usps tracking
>doesn't in ukrpost tracking
>>34878960
>>34879029
100% airshitters. The yellow bands are team identifiers.
>>34879175
>when you clean your rifles with diesel because you're fucking retarded
>>34879302
Nah, that's a thing they actually do over there. Probably decently helpful since there's no real uniformity
>>34879329
Guy on the right is holding a P90 in that one too.
>>34878281
Nice blog post dude
This guy has it on his plate carrier
>>34879353
>being so insecure that you have to do a bunch of "proving" to everyone
Hmmm
>>34879358
>make claim
>be wrong
>"u-ur insecure"
Got me
>>34879358
>being upset that someone is backing up their claims
get back in the truck
>>34879358
>get proven wrong
>K.
Lawl
I need to buy some of this yellow tape
tiny picture for the russian spammer
>>34879402
kek
>>34879358
He seems pretty secure now that he proved your dumb fucking ass wrong. Dumbfuckasshole.
Plum above a certain darkness should be banned
>>34879487
>Ukraine
>White
>>34879494
wat
>>34879501
So many are flat nosed dough faced mongrels.
>>34879520
ok
>check out this wild ride of a photo
>>34879358
Shut up fuccboi
>>34879652
>those horribly loose jeans
Lel
>>34879663
¯\_(ツ)_/¯
Arise
>>34879826
Arise chicken.
>/akg/ has devolved into a shitty image dump thread
>>34879956
Well it is an image board.
>>34879956
It's an imageboard dummy. Also you just moved us one image closer to the 150 limit, with nearly 200 posts to go. We have to ration our 150 more carefully considering the company we keep here recently.
Butt hurt aes10b owners did not know there rifle was single stack.
>>34880095
>there
>>34880068
At least he got a couple new images I guess
>>34880095
*thier
>>34880117
>>34879970
>>34880068
Just saying, the ratio of random images to actual discussion is extremely lopsided compared to usual.
Here's another image since I've just been informed that we're on an image board. Maybe I'll just dump 20 of them.
>>34880236
kys leon
>>34880250
idk who that is, just a pic I saved
>>34880236
>no cleaning rod
Kys
>>34880267
It's a vepr, they generally don't have them.
>>34880300
M8, do you think >>34880236 is a vepr?
>>34880300
>It's a vepr
>>34880308
Nice m8.
>>34880300
>it's a VEPR
uhhh
>>34880308
thought you replied to the actual vepr pic, nevermind
what exactly are the specs for a WASR 10's barrel threading?
>>34880701
? 14mmx1mm left hand threading.
>>34876861
Good article, might explain the origin of the enigmatic "virgin" Tula AKSU kits
Stop ded
Google gives me 0 results trying to find blue or yellow ukie tape :(
>people selling Izzy plums for $40 a piece and getting buyers
I've got like 15 or so of these, how long should I sit on 'em?
>>34881444
Is that 'yote bait cat?
>>34881446
>being a Jewy Jew
How Semitic of you.
>>34881453
Nyet, he's in AZ
>>34881459
I bought a fucking bunch of 'em last year and I only really like a handful of my low mold number shinies and trench art mags. I could probably shed a few and not really regret it, at least not in the short term, but if prices are only going to just keep going up I may as well hang on to them all a bit longer.
I'm not fucking BakesRus, buying up everything I can for resale. Go back to /pol/.
>>34881491
Send me a few so I can trade em for trueblacks
Deactivated ree
>>34881607
Top rekt
>>34881607
How does that little cut impede function?
>>34881607
I need one of those springs.
>>34881648
Short strokes I guess, probably annoying but not a game ender
>>34881635
>>34881648
Probably not at all, it'll only take two seconds with a welder to fix.
>>34881654
Rtg parts or I might have some extra but idk where they are
>>34881662
That's the far end of the gas tube though, and even if it was cut on the opposite side it still wouldn't slow down the bolt carrier velocity, AKs can function without a gas tube at all. All the acceleration takes place when the piston is still in the gas block.
>>34881668
Not a huge deal, mine on my slr104 got bent and the tube wobbles a bit.
If I buy from strela again you think I can get then to send me a bunch of ukie tape? My dick is hard as fuck right now for some of it
Iraq day at the range yesterday.
>>34881847
Neat, where'd the get the gas block on the lower rifle?
>>34881859
Looks like RD
>>34881767
Femanons of /akg/, do you experience breast envy?
>>34881869
RD? I hope you don't mean rifle dynamics because that's a clone of an Iraqi design
>>34881847
Nice rifles. Did the rear receiver on the top Tabuk crack or is it just a scratch?
>>34881890
>femanons
>akg
Nice try at getting kalashettes to come out from the abyss
>>34881890
Not a chick, but they do. It's the same reason that constantly say that men who do a thing they don't like have small dicks, well that and they're attacking their manhood. My point is that it's partly projecting it all, which is the same reason they're so cunty about women who get tit jobs... imagine if there were penis enlargement surgeries that actually worked and how that would change how males see each other? Well it's completely different because women are fucking retarded petty shits.
>>34875178
I guess this is kina AK related, but is the AN-94 still being made?
>>34881910
Just some rust, but I obviously still need to blue them both so it won't be a problem.
>>34881859
It's a galil sight, no idea what model but it did have a bayonet lug on it that I removed. I cut the sight globe in half, milled it down, and welded it back together at the proper height for the m70 rear sight.
>>34881953
>It's a galil sight, no idea what model but it did have a bayonet lug on it that I removed. I cut the sight globe in half, milled it down, and welded it back together at the proper height for the m70 rear sight.
O-Oh
>>34879530
is that british dpm? and why does he have an SL8 and a steyr scout?
>>34881945
I read it was officially scrapped, something about how cleaning it, and servicing it was a monsterous pain in the ass
>>34881980
I'll add that a valmet sight is actually the correct one to use as a base for the clone. The journal area of the galil block I used is too long and has a flat bottom compared to the rounded bottom on the valmet block.
Not really a difference I was going to spend an extra $200 on though. Once I get a rotary table I might pull the block and try to reprofile it but I'm happy with it for now.
>>34881991
Pro-ukies wear a lot of DPM cause it's cheap and available, no fucking clue on the guns tho
>>34881694
Exactly
>>34881953
Nice job, now 24k plate it
>>34882137
You have no idea how bad I want to. I haven't found anyone that I think would do a rifle. I'm sure I would spend more than the cost of the build and tax stamp just on the plating as well. It's a tough choice for something I want to shoot a lot.
Any progress on your bizon build? I just got off my ass and welded the rails into a blank for a vityaz using a deact bolt and magwell.
>>34882252
Nice civi mags. I like how they removed the round limiter.
>giena tactics followed me on ig
Nice
>>34881953
Holy shit anon, preheat your work piece and turn up your amps. There's no way you got good penetration.
>>34882299
>airsoft tier quality camo company follows you on a social media platform, presumably to get free advertisement
Congrats?
>>34882322
It means I'm makin waves
>also i'm bored as shit
>>34882326
Fair enough man. Never stop never stopping until you get that Crye sponsorship though.
>>34882359
>izmash wn follow you on ig and send you a free ak9 as promotion
>>34882300
Yeah, I'm pretty fucking bad at this whole tig thing, thanks for the tips.
I'm running the machine on a 15 amp circuit so I've only tried running it up to about 80 amps out. That stuck some 3/8 plate together for a column support for my mini mill and I have that screwed down tight enough to lever the column into tram so I figure it's more than enough for an ugly weld on a front sight.
>>34882252
Guy on one of the FB groups had a gun done, cost like $2400 but looked beautiful.
Shit dude Vityaz pictures now, those 9mm strippers are great work like the B&T loader right?
No progress on Bizon cause I can't get my trunnion back reeeee.
>gross markings
>>34882548
Who stole it ?
>>34882252
Is that just a standard 545x39 stripper? Or something special for 9mm?
>>34882606
Guy who was going to help me with the barrel.
>>34882616
>3:20 https://youtu.be/pZ0sebdL_28
Decent but made it just fit of course
>>34882548
Any details on the builder? Shit, if I could just send my deact bolt off to be fixed I would probably do that. I need an er11 extension to get the weld out of the firing pin channel and even then I'm not confident that I have the space on my mini mill or the skill to not fuck it up.
No pictures, all I've done so far is plug weld the rails and grip reinforcement to the blank. Scope rail and 5.5mm folding stock are in the mail, and I have a fantastic barrel that cabinarms on akfiles made for me.
>>34882616
>>34882548
Also, yes, standard AK74 spoon and clips, works great for the vityaz mags. I might buy two more mags but the clips will save me a ton of money.
Where is a good place to buy original Mosin clips?
>>34882756
Gold plated I meant.
I have some things ordered then I'll try to rebuild my 9mm bolts.
What parts do you have if you ordered a stock?
>soon
>no cool 9mm slavshit to spend 4 years fixing from a kit
>>34883030
Don't remind me.....
>loose just like it should be.
gunbroker gat just showed up
>>34883100
more pics please
also try and get some better lighting
>>34883100
>he fell for the meme.
>>34883104
real lighting is for cucks, also shitty 20$ burner phone camera
>tfw edges of front sight are canted and it will bug me until I fix it in 5 years
>>34883087
I'm too ready to start spending on slavshit again. I almost want another 74 clone to do more ukieshit with
>>34883125
What kind of Ukieshit?
>>34883116
slightly better pic
>>34883116
damn, canted sights suck
hope you enjoy your first AK anyways
>>34883171
Fixed stock wooden one to go with the 104 and some larp gear for both sides. The gear isn't actually that expensive and a not super autistic bulgy fixed stock isn't either desu
Some MTP and ATACS AU will probably be first in line for gear
>>34883183
just checked them with floss, the post is still dead on, it's just the edges
should work fine, just looks off
>>34883187
That should be an easy build especially if you use Bulgy parts and pickup a nice laminated Russian stock set
>>34882951
Magwell, one magazine, and a deact bolt are the only vityaz parts I have. Everything else will be from a bulgy 74 kit or machined from billet. I'm still trying to decide if I want to use an AK74 front trunnion, cut down and modified for the long rivet on the bottom or make it from billet.
And, got it on the plating. I was thinking around $2k. Titanium nitride or even nickel plating might be a better budget option. I have a beretta 70 that I'm planning to make into a nickel plated tariq clone eventually so a nickel carbine make a nice set.
>>34883238
Yea, I'm not gonna get super autistic on that one desu. Definitely a future project tho, got more guns I want for shooting than just a larping one
Such an aesthetic conflict tho
>>34883190
Ah, that's not bad at all then
Hope you enjoy it f am
>>34883242
Ahhh, if you need measurements off anything let me know. Would titanium nitride look right though?
>>34883271
It really is with all that mix matched gear
>Arsenal finally got SLR-104 "Krink" carbines back in
>too worried about sanctions to buy another 5.45 gun and start an SBR project
fug
>>34883353
I'd be fucking livid if I had a form 1 pending as ammo got sanctioned.
>>34883450
I'm honestly not sure what my next project gun is gonna be. I kinda wanted another 5.45 AK, especially a Krink, but now I'm really on the fence about it. I might just get another PCC like an MPX or an Omega MP5 pistol and Form 1 it later.
>trueblack just sold his fal
GUESS I'MA BUY AN AUG BEFORE A CAR
>>34883520
I'm happy with the AKs I've got, sticking to ammo for now. I'd like an underfolder kit build but that would be a real pain in my ass because of the cost and how long the money would be tied up with a builder.
Right now I'm focusing on other rifles and finally buying a few suppressors.
>>34883574
Do it and we can all touch tips.
>>34883353
>>34883450
It's doubtful Wolf or Tula will get b&, Wolf especially since they're US owned and import from more than just Russia. Yes cheap steel case will be harder to get/more expensive for a while but it'll eventually stabilize especially if another company expands or opens another manufacturer.
It'd be smart for a US company to back a new ammo manufacturing plant in Ukraine because they could use the money and jobs and help with relations.
>>34883601
is that an A3 M1?
>>34883601
It's definitely gonna be soon, that's for sure. It'd be immediate if the fucking upper sold tho
>>34883586
I'm focusing on ammo too. I've got two stamps pending at the moment that should be back late this year, but after that I'm not sure what my next big gun adventure will be. I think PCCs are rad though, so chances are I'll end up doing another one of those, building a precision AR, or finally knuckling down and buying a 1911 or USP.
>>34883609
You do realize both Wolf and Tulammo procure most, if not all of their ammo from Russian manufacturers, right? And that while 7.62x39 is produced in limited quantities outside of Russia, 5.45x39 would *maybe* get made by Prvi Partisan but would otherwise disappear entirely for the foreseeable future?
>>34883660
That why I said it'd be hard to find for a while, until another company decides to start manufacturing 5.45
Hey guys whats a good ak74? I have a wasr10 and I love it but I cant seem to find any 74's around.
>>34883574
>>34883601
Tip tips
>>34883574
:::::::::::^^^^^^^^^^^^^^)))))))))))))))
>>34883775
I cri evrytiem desu
Is 127 shipped for 6 42 rounders and 2 30s a good deal?
>>34883787
Yeah that's pretty good, 44mag has 30s for $20 a piece and 42s for like $28 so compared to their prices you're getting more for less. If they're used just keep an eye on the feedlips but from what I've read about AUG mags is that even when they start to crack they're still good enough to use
>>34883787
127 for 4 42s and 2 30s, my bad
>>34883819
44mag is havin a sale actually, 20 per 42. Guess I'll grab a few from there tonight to prep for aug
Just saw my 2nd cousin's swastika tattoo lel
>>34883888
Show us your swastica tattoo.
>>34882753
>>34882779
Holy crap, could I do that with 545 ammo in a plastic reloading box where the rims are aligned?
I never knew it was possible to load clips right from a box like that.
Some dude just gave me these
>is trap??
>>34883931
check with a blacklight to make sure nobody jizzed on em
>>34883633
Indeed it is.
>>34883638
I'm surprised you haven't sold that yet. Are SPRs out of vogue now or something?
>>34883740
>ywn brush Zasta's leg with yours while sword fighting
Why even live?
>>34883942
Uh oh...
>>34883960
It's gotten interest but no one will nut up. I feel like the diemaco and ops cost drives away casuals but the BA barrel drives away hardcores idk.
>>34882024
Scrapped as in they shut down the production line or are they destroying them now?
>>34879826
Why is your sight set to volley fire?
>>34884108
>cheek height
>>34883991
>the BA barrel
Honestly I could see this being a hard sell for what these clones cost, assuming you're wanting to get out of it anything near what you put in. I never did get autistic enough to try a mk12 build because honestly it's nothing but a money pit, which I'm sure you figured out.
I've actually got a BA Hanson on the way. From what I gather they're not bad barrels.
>>34884173
Fuck. I bought a fcg off someone on the files and it didn't include that little tube that holds the two trigger components together. On the right was the tapco I took off, it has the tube but it's too large to work with the polish surplus one I got. What's that little piece called that I'm missing.
>>34884152
Yep, douglas barrel would've been almost 3x the cost for literally a stamp which I did not give a fuck for. I'm thinking of pulling it and selling the rest as its own lot but I don't wanna remove the barrel components cause that collar is on there fuckin tight
>>34884228
Generally it's only commercial FCGs that have that.
>>34877154
Let's hope this goes through. If there's 2 features I really enjoy in the AK12, its that and the BHO.
>>34884228
It's not necessary and most, if not all, surplus foreign FCGs don't come with or require one.
But it's called a trigger pin sleeve or bushing.
>>34884306
>>34884285
Thanks, makes sense
>>34882252
TiN it instead and get a finish you can actually use
>>34884329
Generally, you would use the slave pin in a 5 piece cleaning kit to hold the fcg together for ease of installation.
>>34875522
You. I like you
how much more vodka do i need to ingest before i feel a desire to own this
>>34884394
Enough to keep safe from radiation at least
We're at image limit guys (thanks spamfag)
Want a new thread now or do you want to take it to bump limit?
We're only 18 posts from it now.
>>34884437
DoItNow.Arnold
>>34884478
Ok.
>Anyone else want to chime in?
New thread
>>34884496
>>34884496
>>34884496
>>34884484
Can we fit a .300 vs 9x39 argument in?
>>34884437
And everybody jumped down my throat when I dared to complain about it...
>>34884504
Sure.
>Although I don't think anybody here has any real experience with 9x39.
So .300 crackhouse kinda wins by default.
>>34884555
It happens.
I just wish if he wanted to image dump he'd spread it out better, and only do it when we need a bump.
>And get better pics with better resolutions
>>34884285
Wrong
>>34875606
Giant ACR you uncultured swine.