AR thread /arg/ tripfag containment

File: 1497736321861.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

Anon told me that mount wasn't strong enough, and that I should get a larue or ADM

File: probby solvo.jpg (1MB, 2400x1600px) Image search: [Google]

1MB, 2400x1600px

>>34407030
They are pretty garbo, basically just soda in a bigger can. I've never even had a heart attack from one.

>>34407067
What grip extendo well is this? I need that in my life.

Also AR THRED POST ARS

File: IMG_2861.jpg (3MB, 3722x2094px) Image search: [Google]

3MB, 3722x2094px

Turns out URX 3.1 rail covers fit perfectly on a Geissele MK4/MK8 rail. All it needed was some mlok nuts and a #8 washer for each screw.

Should I keep them?

File: IMG_0352.jpg (309KB, 750x1334px) Image search: [Google]

309KB, 750x1334px

>>34408134
I'll take the crab

Well my BA barrel is a POS it cant even do MOA

>>34408131
Geissele

>>34408157
That's you dude

File: IMG_0456.jpg (2MB, 3024x3024px) Image search: [Google]

2MB, 3024x3024px

>>34408131
sturdier looking IRL than they look online, guess we'll see how it holds up

>>34408166
looks obnoxious

File: 25654-2__44467.1404844731.1280.1280.jpg (16KB, 375x194px) Image search: [Google]

16KB, 375x194px

>>34408172
I trust it, it's 7075 T6 after all. Rate these irons I'll never use.

>>34408170
No I was able to hit MOA with my BCM upper

File: good eating.jpg (2MB, 2400x1600px) Image search: [Google]

2MB, 2400x1600px

>>34408157
Those two things don't follow.

1 MOA from an AR is rare and expensive. Don't expect it. If you can't shoot better than 1.5 MOA with match ammo in a stable rest then start complaining. 1 MOA is exceptional.

Also possibly this >>34408170

>>34408174
Then it fits your setup. And they're on sale.

>>34408190
But BA claims MOA with their barrels

File: 1498774252389.jpg (78KB, 659x659px) Image search: [Google]

78KB, 659x659px

>>34408186
>not mbus pro + stolen valor

>>34408200
Are you not doing your job of grooming these dweebs?

>>34408190
Slim Jims are fucking disgusting.

>>34408199
With match ammo, from a rest, for 3 shots. Do you meet those conditions? Are you SURE?

If so, send your barrel back to BA after you acquire an RMA, and they will shoot match ammo, from a rest, for 3 rounds and find it to be 1 MOA then mail it back to you with a gfy note.

>>34408186
do you have those? 300m rear + 99051 would be better

>>34408142

PF940C

http://www.polymer80.com/pistolframe-pf940c/

How do you guys feel about the radical firearms AR for babby's first?

>>34408191
Nah my setup is intended for a magnified optic
>>34408200
I've always thought the /arg/ irons combo was gay, they look terrible on their own and as a pair.
>>34408199
it's still up to you to shoot well enough to achieve that, stop pretending to be retarded.

>>34408226
10/10 top tier used by black ops forces for discreet tactical operations

File: sip secrets.jpg (326KB, 1333x2000px) Image search: [Google]

326KB, 1333x2000px

>>34408223
No, the magwell.

>>34408216
You're not wrong.

But at the same time, you're pretty wrong.

File: 20170529_190246 (2017x1135) (2).jpg (1MB, 2017x1135px) Image search: [Google]

1MB, 2017x1135px

>>34408199
>3rds
Even i can get moa with those standards

>>34408222
No I'm just shopping, 99051 would be cool but I don't really want to pay 99051 prices

>>34408220
Thats what I did with my BA barreled upper and my BCM upper. My BCM was MOA and my BA was 1.5 MOA

File: IMG_0449.jpg (2MB, 3024x3024px) Image search: [Google]

2MB, 3024x3024px

>>34408240
are you even trying to be aesthetic

>>34408134
Gecko always win

File: Fluffer.jpg (51KB, 320x280px) Image search: [Google]

51KB, 320x280px

>>34408228
>I've always thought the /arg/ irons combo was gay, they look terrible on their own and as a pair.
You're gay

Only acceptable buis
>Matech/Stolen Valor (for clones)
>Stolen Valor + Mbus pro front
>Mbus pro front+rear
>HK flipups (Not the troy ones)
>Acog BUIS
Anything else is trah for poorfags

>>34408232
No Slim Jims are gross and Rockstar is nasty.

File: 1486530109417.png (114KB, 692x444px) Image search: [Google]

114KB, 692x444px

>>34408249
is it not enough to be KAC wtf

>>34408249
It should be easy to tell that he isn't.

File: 1486438293599.jpg (69KB, 564x511px) Image search: [Google]

69KB, 564x511px

>HSLD edition
My time has come

File: din din.jpg (1MB, 2400x1600px) Image search: [Google]

1MB, 2400x1600px

>>34408245
>fukken doubt it m7

>>34408252
Except for the part about they aren't.

Prove me wrong.

>>34408269
That's LSHD friend

>>34408258
KAC front and rear or Kac+Mbus front

>>34408278
The front I posted is KAC

>>34408283
Then that's fine if you buy it. Now buy it.

>>34408276
They taste the best open you open the package and put them immediately in the toilet.

I win.

File: the good life.jpg (942KB, 2200x1467px) Image search: [Google]

942KB, 2200x1467px

>>34408295
>the best open you open
OPENBOIS

>>34408328
>whipped strawberry
Turboshit. Goddamn I can't type today either.

Another fine product that needs to be opened and immediately poured into the toilet.

File: IMG_20170630_160950.jpg (1MB, 3757x1535px) Image search: [Google]

1MB, 3757x1535px

Need a new meme to buy

Maybe a super nice durr gun

>>34408328
recommend me some aesthetic handguns elburto.

i was thinking about a 4in 500S&W for my next maymay.

>>34408295
alright order placed, cranky

http://www.graniteridgeoutfitters.com/Aero-Precision-AR15-Mil-Spec-7075-Carbine-Buffer-Tube-Kit-APRH100151.htm

Is 40 bucks an alright price for a buffer kit? How much should I spend on lower parts kits? I've seen them range from 200 to 40 bucks. I'm gonna get an AERO lpk minus buffer tube parts for 60. Good deals?

File: 1479819404366.jpg (105KB, 1920x1541px) Image search: [Google]

105KB, 1920x1541px

>>34408377
>i was thinking about a 4in 500S&W
that's retarded

>>34408351
Get a Blaser

>>34408384
wow cool opinion kido ill write that down.

>>34408146
They look offcenter

File: nice rack.jpg (942KB, 2400x1600px) Image search: [Google]

942KB, 2400x1600px

>>34408346
Yeah that one was garbo. Recovery Orange a best tho.

>>34408377
How much do you want to spend and what goal do you wish to achieve?

>>34408377

Now I want a little 12 or so inch 500S&W revolver carbine

>>34408377
Get a Korth revolver

File: 85_bavarian_carbine_0.png (109KB, 1600x283px) Image search: [Google]

109KB, 1600x283px

>>34408391
Blaser r8 or sako Bavarian carbine have been calling to me

>>34408405
They make a lever gun in 500SW

File: 1494885274351.png (281KB, 371x532px) Image search: [Google]

281KB, 371x532px

>>34408405

HNNNGG

>>34408415

I want that Metro aesthetic. Should I actually attempt a suppressed 38/357/44 revolver SBR? Dear God I'm hard thinking about it

>>34408404
nothing over a grand, just aesthetics/fun to shoot

just use the "throw shit until it sticks" approach, i like a lot of your guns.

>>34408407
hell no

>>34408411
What caliber you thinking? Stick with 308?

>>34408114
How does that mount work?
>Is it QD?
>Can you torque it by fingers or need tool?
>Does the wheel have a locking mechanism?
Thanks.

>>34408146
>making your xbox wide rail wider
People don't post top down pics of the G rails for a reason. Once Bill unfucks his Mk14s, MK8 series will be dead.

>>34408448
Hudson H9

>>34408448
Gold plated Deagle in 50 Arab Exploder

File: IMG_0376.jpg (3MB, 3024x4032px) Image search: [Google]

3MB, 3024x4032px

>>34408258
no

>>34408278
>poverty buis

>>34408453
Most, maybe that 9.3 yuro round

>>34408480
Only a child molester would buy one of those.

File: 1496729957431.gif (2MB, 480x481px) Image search: [Google]

2MB, 480x481px

>>34408471

They're that wide? Someone post overhead. I was gonna get one too

File: IMG_2867.jpg (1MB, 2118x3763px) Image search: [Google]

1MB, 2118x3763px

>>34408471
>having baby hands

It's not that wide, anon. Calm down

>>34408490
9.3x74? Personally I'd want one in either 7 or 8mm mauser.

i need a hard case to store and carry my 15" 5.56mm Suppressor Alignment Gage.

post suggestions

>but rod wednesday
>goes on sale yesturday
>$15 less
fuck!

>>34408499
Show it where it connects to the receiver so we have reference. Don't hide the hip to waist ratio.

>>34408480
its not even out yet and ive talked to much shit about it to buy one now.
>we have gone too far

>>34408485
i almost got one last year for about 900 but someone els called the guy like 5 min before i did.

>>34408511
Short fishing rod holder, like one for fly rods.

File: IMG_6790.jpg (2MB, 2446x3188px) Image search: [Google]

2MB, 2446x3188px

>>34408499
I really need to get another KAC front, Surefire pressure switch, and Warcomp closed tine

>>34408518
Ships """"""""""""July 14""""""""""""

>>34408511
Use the shipping tube it came in. Put in a drawer, you aren't using it in the """"field"""".

>>34408539
so a 1" pvc pipe with foam at each end?

ITT people are actually crying about the mk8 being too THICC.

>>34408509
>>34408490
Oh, 9.3x62.

Here, buy thisone.

http://www.gunbroker.com/item/662177186

>>34408544
>you aren't using it in the """"field"""".
i'll use it at meet ups if someone has a sf md

anybody know how long opticsplanet usually takes to restock magpul shit? ordered a stock with no ETA available.

>>34408547
Basically.

>>34408544
idk maybe after some othere people use it and put more than 10rds through it at shot show.


>>34408556
>ordering from opticsplanet
you fucked up.

File: IMG_2868.jpg (1MB, 4032x2270px) Image search: [Google]

1MB, 4032x2270px

>>34408540
I've got a closed tine warcomp on the way. Can't wait.

>>34408515
All about that hip to waist ratio. I've used slim handguards in the past like BCM's KMR and hated how tiny it felt

>>34408562
captain hindsight to the rescue!

>>34408560
i wanted to buy something like a proper hardcase so it looks important, like a precision tool.

>>34408549
>build ergonomic sleek mlok rail
>make it as thick and almost as heavy as a quad
genius

File: axts.jpg (964KB, 2600x1733px) Image search: [Google]

964KB, 2600x1733px

>>34408555
Okay well if you have to be a Tactical Tommy, put it in a map case or an old wrapping paper tube with taped up ends.

>>34408580
>like a precision tool
You know it's going to rust and bend in your possession, why fight the inevitable?

File: IMG_6864.png (236KB, 700x500px) Image search: [Google]

236KB, 700x500px

>>34408572
Where'd you get it?

Trying to also decide on whether or not to do the 212A or SF3P

>>34408580
http://www.sportube.com/Series-1-Sportube-p/11bkswez.htm

File: crab boss.jpg (234KB, 600x474px) Image search: [Google]

234KB, 600x474px

>>34408134
Crabs are the baddest motherfuckers.

>>34408592
On top of getting a warp cop

>>34408592
Going direct through Surefire. Have a friend with an LE account

File: IMG_20170617_155313_120.jpg (2MB, 3148x1771px) Image search: [Google]

2MB, 3148x1771px

>>34408142

>>34408586
>>34408597
i should have stated that i want a rectangular case, i'm looking at flute cases now.

File: 61-h28-threaded-tube-post-bending - copy.jpg (57KB, 738x498px) Image search: [Google]

57KB, 738x498px

>>34408580
Wait I got it. It's perfect for your skills and materials.

Plasti-dip the INSIDE of a length of conduit and thread the ends for caps (which you will also plasti-dip the inside of).

Post pics as you go so we can have some funsies.

>>34408540
>>34408572
>>34408592
14.5 with closed tine warcomp or 13.7 with 249S?

>>34408631
RECTANGULAR

>>34408654
https://www.anythingdisplay.com/page/display/PROD/OCF_case_rectactangular

http://www.ebay.com/itm/Professional-D-Flute-Wooden-Hard-Case-D-Flute-Agar-wood-Case-Irish-Flute-Case-/291817692735?hash=item43f1b09e3f:g:3PMAAOSwAPlXhjZi

16.5 SEEMS LIKE IT'll be a bit too short

>>34408642

13.7 with 249S only because I like the 249S

>>34408642
I say Warcomp bc suppressors

However the 249s is sexy

>>34408672
looking to not exceed 20"x6"x12"

>>34408509
6.5x55 yo

File: 22BA62F1.jpg (70KB, 1000x809px) Image search: [Google]

70KB, 1000x809px

>>34408114
Quick question for you guys. Does the cmmg 22 conversion damage the barrel?

File: arrow case.png (366KB, 1097x738px) Image search: [Google]

366KB, 1097x738px

>>34408682

File: 0933bd9103173efb9b1af2364208b381_9e5e217e949bbc63bdb2c62eb070f8ca.png (119KB, 900x193px) Image search: [Google]

119KB, 900x193px

Just bought one of these

>>34408685
no, it just makes it really dirty

>>34408701
thanks, i was trying to think of things that were similar to the rod and was drawing a blank

>>34408581
>BCM KMR-A 13": 10.2oz
>Geissele MK8 13": 13.3oz
>DD M4A1 RIS 12.25": 17.7oz

The MK8 is stronger than the KMR-A and still weighs close to 4.5oz less than a quad rail

>>34408716
We understand that you're not smart and have a hard time thinking. It's cheap too, like 30 some bucks.

File: s-l1600.jpg (17KB, 1000x1000px) Image search: [Google]

17KB, 1000x1000px

>>34408736
too long, the crossbow bolt cases work but look lame.

i think i'm gonna go with the wood case and get the geissele logo engraved

>>34407725
the DPMS platform is referred to as AR10 but it really is a hybrid of a legit AR10 and the AR15, which is why I refer to it as AR308 and others do too.

File: case.jpg (43KB, 1000x1000px) Image search: [Google]

43KB, 1000x1000px

>>34408795
>>34408760

>>34408835
>>34408795
https://www.amazon.com/dp/B01N07GVKZ

>do wood work
>have lots of wood working tools
why don't i just make it myself?

>>34408835
too long

>>34408846
Because you're too retarded to think of that first.

>>34408851
seems like too much work

>>34408351
What optic is that?

File: 1468123242382.jpg (2MB, 2415x3262px) Image search: [Google]

2MB, 2415x3262px

Has anyone in /arg/ gone through the Silencer Shop Kiosk system yet? I think I have to do that in the next week or so and was wondering what it's like.

File: DSC_1133.jpg (994KB, 1800x1200px) Image search: [Google]

994KB, 1800x1200px

>>34408887
what your dad should have bought you instead of that fucking telescope

>>34408887
Its airshit

>>34408907
no

>>34408884
As expected from you.

>>34408398
They're longer on bottom

File: 1466058244814.jpg (1MB, 2343x3262px) Image search: [Google]

1MB, 2343x3262px

>>34408915
SCAR replacement scope is gonna be on hold for a while. Need M2HB parts and M16A1 parts.

>>34408922
>no
It was worth a shot. Just curious how long the whole thing takes. This'll be the first Form 4 since 41f.

>>34408915
Nice department gun

File: 00e8c7c6dcdf14830989704a4c9bca79.png (13KB, 185x200px) Image search: [Google]

13KB, 185x200px

>>34408967
better funded than you dept, fgt

>>34408964
do it and lets us know.

i need to get my prints done and sbr my kac

>>34408976
Yea hotpockets from your mom and stealing anime and wifi does really open up your disposable income budget.

File: 1470094596781.jpg (2MB, 3264x2218px) Image search: [Google]

2MB, 3264x2218px

>>34408993
>do it and lets us know.
Will do. Have no choice but to get it done to get the Form 4 rolling. It might be a week before it gets done because of the 4th.

File: DSC_6497.jpg (885KB, 2400x1600px) Image search: [Google]

885KB, 2400x1600px

>>34408995
project harder

>>34408576
sorry i wasnt there to hold your hand when you were making shit choices.

>>34408581
kys bitch hands mcfagatron

>>34408995
> doesnt know about the rocks

>>34409014
And your range is shit too!

>>34409076
I hope you don't go to a public range

File: 1497929530830.jpg (259KB, 1226x699px) Image search: [Google]

259KB, 1226x699px

>>34409076
yeah it is
there's a lot of shit to clear out of the way to get a proper 200 yards set up

I'm doing it guys, next Monday I'm going to my local ar shop and gonna start paperwork on a suppressor.

What are the odds I get to pick it up before two years?

File: CASE.jpg (262KB, 1632x1050px) Image search: [Google]

262KB, 1632x1050px

found the perfect case

>>34409147
for what reason

File: datseal.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

>>34409141
>What are the odds I get to pick it up before two years?
1:1

>>34409153
to put the GEISSELE AUTOMATICS SUPPRESSOR ALIGNMENT ROD

obviously i'm not buying that one, i'll just get the $20 ebay one

If garand thumb is here can you tell me your thoughts on ballistic advantage barrels

File: prongflashhidersBTFO.png (99KB, 1251x788px) Image search: [Google]

99KB, 1251x788px

>buying an open prong flash hider in 2017

>ergodynamics

File: 1436417495488.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>34409187

>>34409210
Is it btfo?

>>34409187
That's one of the most mall ninja things I've read since gecko45 himself.

>>34409187
closed tine is the future

File: SF3P 1.jpg (1MB, 2048x3264px) Image search: [Google]

1MB, 2048x3264px

>>34409228
No?

>>34409237
>tripping on a curb while at a dead sprint
>mall ninja
checks out

>>34409237
>provides experienced based criticisms

>mall ninja

these things are mutually exclusive anon, the whole point of the mall ninja story is that it was a big list of things that don't happen

File: 20170630_185114.jpg (2MB, 2160x2160px) Image search: [Google]

2MB, 2160x2160px

>>34409242
I will, fucker.

>>34409271
what does it say?

>>34409271
>doesn't post the swag
sophmoric shitposting

>>34409271
Return and get your money back

File: giddy.jpg (567KB, 683x1024px) Image search: [Google]

567KB, 683x1024px

>>34409284
>giddy cant read english

>>34409113
Not usually.
>>34409114
That sucks. Half a dozen trees will get me to 350

>>34409294
BCM stickers aren't swag, they're packing material.

>>34409284
"Enjoy ur shit grip lmao"

>>34409306
Its in some shitty hand writing

Thoughts for a suppressed FA upper?

http://www.gunbroker.com/item/662282559

>>34409363
*footwriting

>>34409373
If you're not going hk416, this is probably the next best bet

File: LowQualityBreakdown.jpg (2MB, 3264x2447px) Image search: [Google]

2MB, 3264x2447px

>>34409384
>If you're not going hk416
Yea, no. I figure it's probably the best route for a suppressed FA SBR.

File: IMG_6510.jpg (2MB, 2340x3103px) Image search: [Google]

2MB, 2340x3103px

>>34409187
Which is exactly why I've been muh dicking over closed tine surefires lately.

Think I'm going to get a 212a, would like to find one on sale over the 4th

>>34409397
Why not go DI with adjustable gas?
The LWRC one looks okay

File: 1498765712367.jpg (40KB, 657x527px) Image search: [Google]

40KB, 657x527px

Did I fuck up by torquing and timing down my birdcage flash hider with just a BEV block and a armorer's wrench attached to a breaker bar for more leverage?

>>34408381

ye

>>34409441
Yes

>>34409333
trips confirm

paul btfo again

>>34409441
No

>>34409306
that wasn't english, i think it was Cyrillic or Mandarin

>>34409344
thanks

>>34409441

did you?

>>34409465
If we keep saving them up, eventually there could be a literal 20lb box of stickers to send to gecko.

>>34409464
>>34409480
>>34409487

>/arg/ in a nutshell

File: 20170630_190814.jpg (4MB, 4032x2744px) Image search: [Google]

4MB, 4032x2744px

>tfw you remember that you were given a fancy pooltable for free but never built it and threw away the surface
looks like i've got some fancy wood to build my own case, which piece should i use?

>>34409500

thanks dad

>>34409500
Just check your threads if they are fine then put it back on

>>34409373
You already fucked around and let the none painted one get away

https://clydearmory.com/hk-416-d-parts-kit-painted-4192.html

>>34409508
Make a pool table instead

>>34409242
>future
Why did you fags ever to fork in the first place? They found out back in Vietnam that an open FH is shit.

>>34409514
Those have been gone for a while

>>34409528

flash reduction is superior with open forks versus a closed variant

>>34409538

What's the closest to a good open forks design but with closed forks?

File: M151.jpg (1MB, 2360x3203px) Image search: [Google]

1MB, 2360x3203px

>>34409424
The adjustable gas systems on DI guns just seem like a lot of tinkering to get it all dialed in, and I want the gun to be easy to go back and forth from suppressed to unsuppressed. The auto regulating gas system on the LWRC seems like a great design. I've talked to a couple of MG owners that really like them

>>34409537
Not really, the black none paints was in stock within the last week or so

>>34409615
Nope I was gonna get one a month ago and they were out of stock

File: 1498709384161.jpg (2MB, 3961x3021px) Image search: [Google]

2MB, 3961x3021px

>>34409514
Damn are those compatible with standard M16 lowers or proprietary to HK shit.

>>34409492
he'd shitpost them for months

>>34409622
Yeah, so was I. Like less than 2 weeks ago.

>>34409629
Yes

>>34409630
Plot twist:layer glitter in with the stickers.

Purple and green glitter.

>>34409630
Can you answer >>34408454
Thx bb

>>34409524
no, i'm missing the slate surface and some other pieces plus no room for a pool table.

File: war1.1_CLIPCHAMP_keep.webm (1MB, 853x480px) Image search: [Google]

1MB, 853x480px

>>34409591
W.A.R. UPPER

I love both of mine

File: IMG_6865.jpg (14KB, 480x320px) Image search: [Google]

14KB, 480x320px

>>34408114
Thinking about getting an arisaka 300v instead of a surefire. Any reason as to why I shouldn't?

>>34409728
No

>>34409728
Nope go for it

>>34409728
No, Arisaka makes good stuff, and the heads are Malkoff, also excellent

Better than streamlight

File: 1433443763174.jpg (1MB, 2448x3264px) Image search: [Google]

1MB, 2448x3264px

>>34409725
You did a lot of fucking around with those to get them tuned right.

>>34409709
just twist the knob until its hand tight to secure and untwist to remove.

https://youtu.be/o5UMTq6qd6c?t=43s

start at :43

>>34409743
yes but that's because i'm autistic and use an h3 buffer and xp spring along with slr adjustable gas block and wanted it to eject at 3-4* on both settings.

you can just install it like normal and have no issues

File: LT104 1.jpg (1MB, 3241x2366px) Image search: [Google]

1MB, 3241x2366px

>>34409767
I'll chew it over. I think I still like the LWRC route better. You think it'd be find to plug and play on a 10.5"

>>34409792
>You think it'd be find to plug and play on a 10.5"
the war? yes, it was easier to get my 10.3 set up than my 14.5 because of the higher gas pressure

>>34409760
Wow. That's enough clamping force to keep zero?

>>34409823
allegedly. havent seen any zero shift complaints about em

>>34409850
I have to wonder about their return to zero

>>34409850
How is return to zero? Better or worse than ADM? Larue?

>>34409792
PWS makes great piston uppers from my understanding

>>34409884
>>34409894
they have a video on it but they could have conducted it better imo

https://www.youtube.com/watch?v=cGNT5pgRk0A

>>34409850
They have a video where they show that and it performs awesome. Long boring video with no editing cuts to prove it works.

File: Range.jpg (2MB, 2315x3106px) Image search: [Google]

2MB, 2315x3106px

>>34409803
Well, like I said, I'll take that into consideration.

>>34409924
PWS has a nice longstroke piston system, but I'd probably trust LWRC more for a full auto application.

File: DSC04177.jpg (1MB, 2211x1242px) Image search: [Google]

1MB, 2211x1242px

forgot how badly those stock handguards "shield" heat.

File: Warden.jpg (1MB, 3264x1836px) Image search: [Google]

1MB, 3264x1836px

>>34409994
Back from the grave?

File: IMG_20170630_190700.jpg (975KB, 3315x1308px) Image search: [Google]

975KB, 3315x1308px

>>34410003
How many rounds to do that?

File: DSC_0151.jpg (703KB, 1728x972px) Image search: [Google]

703KB, 1728x972px

>>34410003
yeah. finally finished my schooling so back in the game.

>>34410069
Rail Road school?
>>34410051
4x D60s back to back with a binary trigger

>>34410103
Oompah loompah school

>>34410103
Yeah, 7 weeks to teach you rules and all that crap to become a conductor

>>34410155
Rub it hard in MSD's face.

File: 1435131163676.jpg (1MB, 2511x1671px) Image search: [Google]

1MB, 2511x1671px

Lancer or magpul for SR25 mags?

>>34410155
Neat, make sure you bully MilsurpDude

>>34410184
>but it's diesel!

File: 1498669452998m.jpg (51KB, 1024x577px) Image search: [Google]

51KB, 1024x577px

>>34408377
Mateba

>>34410169
>>34410184
I'll take some cool shots while working and be sure to laugh at his coal engines.

>>34409441
If you didn't bottom out the crush washer, and then continue to try and force the birdcage on, no.

>>34408114
Does anyone want to buy my 300memeout upper

BA 9" barrel
Joe Bob Outfitters adjustable gas block
KAK Flash Can
Seekins 10" SAR 2 rail
Anderson upper receiver
Standard mil spec m16 profile bcg
Mil spec charging handle
PA advanced micro red dot w PA lower 1/3" mount

Without bcg or charging handle or optic/mount
$220

With bcg and CH no optic/mount
$285

With optic/mount and everything else
$380


Also let me know if you all think these prices are too high or too low. I think they seem fair.

This is an upper for someone looking for a decent little 300blk pistol/sbr

Definitely isn't Gucci but has decent components. Has about 250rds through it.

>>34410408
Forgot pic

File: IMG_6868.jpg (473KB, 663x1921px) Image search: [Google]

473KB, 663x1921px

>>34410429
Twice

On second thought, no one buy it. Going to use it to kms now

folding chess board

File: IMG_0445.jpg (70KB, 750x561px) Image search: [Google]

70KB, 750x561px

>>34408114
Where to buy ubr from? Same price everywhere

>>34410441
arfcom will buy it

>>34410455
How goddamn funny would that be. I'd die.

File: 6D0D6286-68CB-4064-AE21-D5061F6A985F.jpg (397KB, 2048x2048px) Image search: [Google]

397KB, 2048x2048px

>>34410471
I was so hoping it was real

>>34410464
You deal this stuff all the time. Does that pricing seem fair to you?

File: best music if you are 12.jpg (1MB, 2400x1600px) Image search: [Google]

1MB, 2400x1600px

New credit card came in. I'm going all Giddy, like seriously I need to stop this is dangerous fuck.

>>34410476
Wonder what the leftist would do if Trump banned him from returning and found his real BC.

>>34409994
>single heat shield

File: IMG_9361.jpg (190KB, 750x836px) Image search: [Google]

190KB, 750x836px

>>34410501
They'd whine and bitch, as usual.

>>34410495
Don't do it man. I got like 10k down several years ago. It was awful. They will eat you alive.

>>34410480
You could get more. Add up the fair price for the components and take 20-30% off

Am I retarded or is the gen 1 ubr unavailable everywhere?

I'm gonna buy glock shit if that's the case

>>34410495
Too bad you can't buy taste.

File: rapement.jpg (763KB, 2000x1333px) Image search: [Google]

763KB, 2000x1333px

>>34410537
You are retarded for wanting any gen UBR, yes.

Watch yourself bucko, you're dangerously close to...

>>34410183
is it going to be an actual sr-25 in appearance or just that pattern or ar308? I would say metal mags is the former, and magpul if the latter. 7.62 Lancers don;t look great imo, they are too busy to match the usually visually simple AR-10

File: IMG_9214.jpg (1MB, 2873x3186px) Image search: [Google]

1MB, 2873x3186px

>>34410547
You owe me $2.59 for that shitty rockstar i bought.

>>34410547
At least there's wifi down there
I even know the password

>>34410531
Ok thanks. I'll think on it a little more and price again later

>>34410537

Do people actually want Gen 1 UBRs? I've had a black one sit in my gun parts bin for like 3 years now

File: missing grease.jpg (229KB, 1333x2000px) Image search: [Google]

229KB, 1333x2000px

>>34410554
>$2.59
haha a fool and his money nigga those things are 2 for $3 SONNNNNNNNNNNN

at least you got one sip free

>>34410560
dont tell nobody

File: 1493171167977.jpg (30KB, 500x359px) Image search: [Google]

30KB, 500x359px

>>34410547
>crawl space

>>34410591
Yeah. I can't find them in stock anywhere

>>34410592
I don't know if that's really the price I paid, I'm just saying it was nasty

>>34410592
I don't know what to do with all my grease

>>34410600
That's where he puts the dead children.

>>34408685
No, but I leaded a gas port shut with one before the .22 panic.

I've got a dedicated upper now.

File: iphone 2016 967.jpg (272KB, 950x1344px) Image search: [Google]

272KB, 950x1344px

>>34410621
the basements like a 1/3-1/2 of the house

File: 1480542026773.png (140KB, 208x206px) Image search: [Google]

140KB, 208x206px

>>34410547
>putting the networking stack in the basement
Stop it

>>34410643
He's got a lot of dead children to hide.

>>34410646
It's the best place to keep it cool.

File: neworder.png (458KB, 1361x745px) Image search: [Google]

458KB, 1361x745px

How has everyone's week been? <3

>>34410760
and damp

File: 1490129954857.jpg (9KB, 177x278px) Image search: [Google]

9KB, 177x278px

>>34410780
>Coupling- Male

@34410780
>losing you privileges this fast

>>34410781
Dehumidifier

File: tumblr_inline_o2tiep9mDx1rfnlv2_500.jpg (61KB, 409x581px) Image search: [Google]

61KB, 409x581px

>>34410815
>Dehumidifier in crawl space

>>34410820
Gotta keep them dead kids from rotting too fast.

>>34410858
kek

File: memesly.jpg (938KB, 2600x1733px) Image search: [Google]

938KB, 2600x1733px

>>34410646
>>34410781
>>34410815
>>34410820
There's no water in my crawlspace wtf. Ambient humidity is like 65% year round, vapor barriers and shit, slopes and drainage, what am I some ogre slopping around a muddy swamp?

File: 1498759879230m.jpg (58KB, 1024x576px) Image search: [Google]

58KB, 1024x576px

>>34410537
Oh you need a UBR now?

I can provide, for a fee of course.

File: [REDACTED].jpg (4MB, 3120x4160px) Image search: [Google]

4MB, 3120x4160px

>>34410896
>what am I some ogre slopping around a muddy swamp?
Actually yes, yes we do

Set the equipment in the closet with that trap door and just run cable through the fucking trap door.

>>34410896
I was gonna say fat blob but yea that works.

File: 1498590701396.jpg (46KB, 480x480px) Image search: [Google]

46KB, 480x480px

Is anyone aware if they make 10.5" barrels with the gas ports located close towards the receiver similar to a 7.5" barrel?

Looking to make an upper build using 10.5" with a barrel shroud to get an integrated suppressor look since I'm too poor to buy a decent can, but the gas block on a regular 10.5" is too far forward to accept a shroud.

I guess I could cut the shroud? But I was curious if they made the 10.5"s I was talking about.

>>34410981
Pistol gas?

File: 1494732653372.png (261KB, 1039x559px) Image search: [Google]

261KB, 1039x559px

>>34410981
>suppressed 10.5 with pistol gas

>>34410981
Like >>34410441?

File: 2017-06-30 22.08.01.jpg (2MB, 2121x3771px) Image search: [Google]

2MB, 2121x3771px

>>34410987
>>34410987
>>34410997

I tried drawing an image to maybe more accurately describe what I'm trying to get at

>>34411040

Kind of yeah, but with the gas tube the same distance on a 10.5 where it would be if the barrel was 7.5

>>34411076
300blk

File: IMG_20170618_223110302.jpg (545KB, 2300x1294px) Image search: [Google]

545KB, 2300x1294px

>>34408134

Holy shit sign me up for Monky Bizness

>>34411076
yeah that's a 10.5" with pistol gas, which will alter the performance of the rifle

File: gassystemlength.jpg (24KB, 519x396px) Image search: [Google]

24KB, 519x396px

>>34411076
Yes, Different gas systems have different lengths.
A standard 10.5" is most likely carbine (7.8")
Maybe you could find a pistol length (4.8") on a 10.5" barrel. Will be interesting to see the reliability, maybe go piston

>>34411097
Then you need to get 300blk and not 5.56 bc it's a pistol gas system

File: IMG_9292.jpg (1016KB, 2954x3938px) Image search: [Google]

1016KB, 2954x3938px

>>34410903
I'm about to buy a 80 block frame.

http://www.polymer80.com/pistolframe-pf940c/

Pre textured obviously. I'm having issues finding the lower parts kit, probably because I'm on mobile.

what is the optimal gas system for a 300 blackout

>>34411141
Am retarded, kms

>>34411108
>>34411115
>>34411127
>>34411132

Thanks guys

>geissele package shipped yesterday morning
>hasn't moved
GOD DAMN IT, GIVE ME MY ROD

>>34410780
What is this? What am I looking at?

>>34411249
lewd

File: IMG_20170314_170518267.jpg (970KB, 3000x1688px) Image search: [Google]

970KB, 3000x1688px

>>34411249

I'll give you some rod, Skeeter.

File: 1497750228894.jpg (1MB, 918x1630px) Image search: [Google]

1MB, 918x1630px

>>34411253
japanese porn comic featuring a male goat monster and human of indeterminate gender, which are characters from an indie game.

File: rumplyblanket.jpg (1MB, 3000x2374px) Image search: [Google]

1MB, 3000x2374px

>>34411282

That sums it up rather succinctly.

>>34409508
"fancy wood"

lmfao its probably some shit common wood with plastic inlays and stain.

File: 1498344201125.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

>>34411288
I could see it being pretty decent if the human is female, not worth ~14 GBP imo

File: IMG_20170528_112430284.jpg (1MB, 3600x2025px) Image search: [Google]

1MB, 3600x2025px

>>34411322

Especially because you know it'll be a dude in the comic anyway.

File: izq1v3d.jpg (64KB, 500x493px) Image search: [Google]

64KB, 500x493px

>>34411352

File: IMG_0462.jpg (1MB, 3024x3024px) Image search: [Google]

1MB, 3024x3024px

p&w job can come back any day now

>>34411293
solid wood now go eat shit and die

File: 1495838181849.jpg (1MB, 2260x895px) Image search: [Google]

1MB, 2260x895px

>>34411369
>his gunsmith doesn't p&w while you wait

File: tfwbrengun.png (325KB, 1358x1286px) Image search: [Google]

325KB, 1358x1286px

>>34411405
a-at least he doesnt a cleaner job than adco

>>34411282
I still have questions. Even more questions now, actually.

File: th.jpg (7KB, 300x300px) Image search: [Google]

7KB, 300x300px

>>34411417
I'm pretty sure everyone does a better job than adco.

It also helps to know your gunsmith really well.

File: 1461179981341.jpg (9KB, 200x201px) Image search: [Google]

9KB, 200x201px

>>34411420

You're getting into dangerous territory now.

File: 1394504954418.gif (2MB, 295x216px) Image search: [Google]

2MB, 295x216px

>>34411420
What do you want to know anon

File: NickCriminalPast.jpg (186KB, 750x1034px) Image search: [Google]

186KB, 750x1034px

>>34411417
inb4 you get nicked

File: IMG_6089.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

>>34411430
hes good people but he doesnt do p&w work out of his house, goes to a machine shop something like once a week

File: 25877613324_27e04e8265_b.jpg (88KB, 576x1024px) Image search: [Google]

88KB, 576x1024px

>>34411417
you have to specifically request an inconspicuous p&w from adco

File: noripdoggo.jpg (1MB, 3024x3024px) Image search: [Google]

1MB, 3024x3024px

>>34411461
nah hes already done two for me in the past

>>34411474
good lord is that adco's handiwork

>>34411369
Why not go to the local welder? You set it up, he's done while you get lunch.

File: s-l1000.jpg (41KB, 398x600px) Image search: [Google]

41KB, 398x600px

>>34411420
Enjoy the trip anon,

>>34411474
What in the fuck

>>34411472
>Work on guns
>not in a machine shop 5 days a week

That's not good dude.

>>34411487
or just buy a cheap stick welder and do it yourself

>>34411490
nah he's fine. he just mostly does FFL stuff

>>34411497
That too.

>>34411486
>is that adco's
its not, its just a funny pic i saved from arfcom. guy takes his rifle to a LGS. LGS is a 1911 specialist or something but doesnt do ARs. asks for pin and weld. gets pic related back.
the lgs milled two flats into the brake and inserted some pins on either side

>>34408142
Does that Walther actually function? Also who makes the mag?

>>34411474
Jesus

This is what scares me about doing a p&w job here locally where I have no idea how well of a job they do.

File: IMG_0445.jpg (2MB, 3024x3024px) Image search: [Google]

2MB, 3024x3024px

>>34411524
id be pissed but thats exactly why i just use the same dude who i know will do it well