post this view edition
old >>33544190
>>33546852
>tfw no new pics of AR in up to date configuration other than this shit tier one
>>33546852
Make me
>>33546831
O i was just meming, you still actually have that thing?
No.
eh next time i take my rifle out maybe.
>>33546869
where's yer front bus?
>>33546852
This view is like when fat chicks only post their face picture but you finally see their full body picture and realize they're a whale. Look at that how wide that SOPMOD and RAS are. Thank god for skinny handguards and stocks. It's 2017 ffs.
>>33546852
In.
>>33546852
i beleted a lot of my pictures
>>33546886
bb hands manlet spotted
>>33546852
it fell over
>>33546895
Not memeing, why that over a Spuhr?
Help. For plinking and possible defensive use:
Acog or red dot?
I feel like the acog would suck ass within 100 yards and a red dot would be faster in an urban area
>>33546878
Thanks for the advice last thread on colt N1.
>>33546852
>>33546899
Chubby chaser detected.
>>33546910
It starts being an issue if you don't into BAC within 50
>>33546818
yep other day when burt posted his wolf a1 somebody post link to arfcom where battlefield LV took one for spin and in that thread somebody suggested turning a2 20 degree to right or left to operate like ak slated muzzle device.
at that time i only could image autist here who would sperg the fuck out every time somebody post their with 20 degree off a2 birdcage.
>>33546262
>>33546840
can confirm. you better have 5.56 chamber even then you can still expect popped primer there and there.
danger hot ammo get me hot!
>>33546904
>inb4 muh G muh color muh aesthetic muh CLAMPING FORCE! muh aesthetic!
he fell for it like a sucker.
>>33546914
you are welcomed bb!
>>33546871
yup
>>33546910
Dot
>>33546910
>defensive use
>fixed 4X
Your life isn't fucking Arma, you're not gonna be defending yourself against someone at 200 yards. Just get a reddot
>>33546922
Is it still painted?
>>33546884
Didn't even notice that, going to put it on when I put the rail panels on.
>>33546931
yup
>>33546904
hadn't been aware of them, i like the look of the g-mount better, and what >>33546921 said
....how do you attach magazine pouches to a riggers belt?
>>33546946
>hadn't been aware of them
cryingHakim.jpg
>>33546938
How much u want
Throwback to when there wasn't spraypaint on my rifle.
>>33546948
Riggers tape obviously
BRB
>>33546910
gimme percentage which you would most likely to use it for
example
> 70:30% 100yds group printing and plinking at steel beyond 100yds to under 100yds plinking
acog can be used in cqc with Bindon aiming concept.
you also can mount micro reddot on acog.
>>33546978
How's being a felon going?
ur all gay
New upper rip money :(
>>33546956
*laughs in Geissele*
>>33546986
same as being a cuck id imagine
>>33546958
eh, i don't actually want to sell it, i was just joking
>>33547002
Did you buy a good one or something stupid?
URX came in the mail today. Now what meme upper receiver to get with it? Kind of thinking about getting a MUR w/FA.
>>33546852
How do these collars stay on? Do they thread on? What's the point of it? I'm thinking about getting into cloning.
>>33547020
>Did you buy a good one or something stupid?
Probably something stupid
>>33547026
cool
>>33547026
Didn't you order that a while ago?
I thinking I'm going to get one too for an SPRish build
>>33546852
k
>>33547032
>KMR
You done goofed
>>33547028
It's a taper mount collar to fit an Opsinc back-over-barrel suppressor that nobody who has ever built an SPR clone owns because it's 1960s technology IP that keeps getting passed from machine shop to machine shop every couple of years because there's no money to be made producing the design.
>>33547028
Ahh, there's a set screw?
Butt again, what's the point
>>33547028
It's for an Ops Inc suppressor.
>>33547047
>>KMR
>You done goofed
Not really I like the KMR.
>>33547035
How much longer do you have left on your LT15?
>>33547039
I ordered it a week ago. They just never sent out a tracking label or anything. I just figured they were taking their time with it.
Also, you should. I'm pretty sure they still have them in stock on sale. I still haven't decided if I'm going to go 18" or 14.5" on this.
>>33547032
>rail of the past
>>33547068
4-6 weeks
>>33547068
>going to go 18" or 14.5"
Same here. Part of me wants to do a 14.5" but with fairly powerful scope and a bipod
>>33547032
>keymod
Poor guy, who's gonna tell him?
>>33547057
>hes never been in the mk12 clone thread
sad!
>>33547077
Jesus. I'm dying waiting on a mount to get here that'll be in my possession in 2 days. I'd kms with that kind of wait. It's literally the biggest thing that discourages me from going into NFA land
>>33547070
Its better than memelock
>>33547080
I feel like if I go SPR I want at least a 2.5-10x or even a 3-9x on it rather than just my ECOS.
>>33547092
It's been two weeks already too
>>33547088
doesnt even own a rifle and is shit talking my Keymod rail. wow.
>>33547063
to mount can
>>33547095
its objectively worse
t.crane
>>33547077
You tough mother fucker.
>>33547090
LITERALLY NOBODY.
LOOK AT THIS SHIT.
THEY ARENT EVEN TRYING.
>>33546948
Belt mounted tacos
>>33547126
>that lower
DLET THAT RN
>>33547133
further confirmation mod0 enthusiasts r tarded
>tfw don't have superior model gentics
SPR """"""""""""clone"""""""""""" comin through
>>33547162
it's just pixels, they don't actually look like that
Just clonin around
>>33546852
>>33547163
>>33547126
What handguard?
Anyone wanna buy a CLEAN upper :^
>>33547099
Yeah, 2.5-10 NF is what I had in mind
https://www.youtube.com/watch?v=9qX5ZbZJrY4
>>33547248
$150
Huh...
>>33547248
$80
Noob to building an AR here...how do I know for sure that the hole in the gas plug lined up with the hole in the barrel? The rear set screw on the gas block set into the factory drilled dimple, so I assume that means I'm good? Any simple way to check?
>>33547305
>any simple way to check
you could shoot it.
>>33547305
>The rear set screw on the gas block set into the factory drilled dimple, so I assume that means I'm good?
yes
>>33547305
the hole on your gas block should be big enough to allow some error, only way to know for sure is to shoot it.
>>33547306
>>33547339
n-not really 5'3!!1
t. skelly the manlet
>>33547339
I've seen better math.
>>33547248
you have weak asian hands
>>33547319
Gonna have to get a pistol brace...
>>33547254
Yeah, I was kind of thinking something like the one on the left but probably with the SF3P instead and a KAC lower.
>>33547384
wrong pic
>>33547374
delit
>>33547126
Look at it this way; they're probably miserable knowing they can't ever fully replicate the Mod 0, and even if they could it would still be the fuckugly abortion it was from the beginning.
>A1 lower
>PRI rail on a PRI tube that's right out of 2010
>SS barrel
>a fucking can collar
Pretty fucking groce.
>>33547143
Don't ever poke me or my son again.
Would the Surefire SF3P be a decent flashhider to pin on a 14.5" AR? Don't want a muzzle brake and want something that gives me options
>>33546852
qb I sent you the email
>>33547434
yes
>>33547434
Yes
>>33547434
I'd say either the SF3P, the BE Meyers 249 Saker, or the AAC Blackout
>>33547032
Should've went with a standard weight barrel, but other than that. all good
>>33547445
yeah cockmail doesn't load pictures i guess
give me a tldr
>>33547394
Those got me hot and bothered
>>33547486
He wants to as the bull
>>33547493
>little skinny hand guard
>big fat stock
you're doing it wrong
Geissele mk8 or mk4 for 10.3 upper?
>>33547545
hey that's my idea fuck off
>>33547545
Mk4
>>33547545
>mk4
>ever
>>33547553
wait I was thinking of the 0
>>33547563
You sold yours, you don't get to have an opinion
>>33547573
never had the worst mk
>>33547545
MK8
>>33546852
Ok.
>>33546852
>>33547553
Status of ar: dysfunctional
Opinion rejected
>>33547573
>you have to hold onto your mistakes
>>33547545
mk8 unless this describes your thought process
>hey guiz I want mlok
>no wait! I want rails
>uhh fugg can't decide xD
>>33547486
Gibbs has a new ch design with their new uppers
Gen 1 buyers will be able to get upgraded to new design
I want to upgrade to new design and have them inspect and test it before you and I make an arrangement
What rail were you offering
>>33547614
Status of ar: invisible
Opinion rejected
>>33547626
Nobody cares about this we're discussing Geissele
>>33547603
Nice bipod *>*
>>33547637
Geissele you say?
>>33547626
https://gibbzarms.com/product/mg4-side-charging-upper-receiver/
Actually has a dust cover.
>>33547618
Exactly why his opinion of mk4 is suspect
>>33547626
a 13'' mk8
so you can live out your dream of copying my SPR
go ahead and do the upgrade and tell me how that goes
wat da fug
http://soldiersystems.net/2017/04/05/us-army-considers-7-62-interim-battle-rifle/#comments
>>33547648
And forward assist
And better charging handle design. But I'm over the side charging uppers and qb wanted it in trade for a mk8 I think
>>33547661
>inferior bipod
Ok cool I'll get that dealt with
That's my acs there huh
>>33547127
ok so then the thougher question is what color do I get
>>33547661
>harris bipod
an attempt was made I guess
>>33547661
Also what barrel length
Fuck I like that rifle but magpul fixed looks better imo
>>33547670
Wisdom
>>33547670
>checks date
>not april 1
da fuq is this
>>33547670
Time to ditch 5.56
>>33547661
That rail is black and I am getting / got fde furniture
God damn now my lower won't match. Brb kms
>>33547682
>being retarded
>>33547694
it's a 20'' larue barrel
>>33547715
this is what spraypaint is for
>>33547670
>mfw the new CSASS was really just a way to covertly develop the new standard issue .308 battle rifle
>>33547721
>monopod
You just went full atlas son
>>33547661
>13 inch mk8
Lemme get dat since Liz is cuck
>>33547721
Nice I think my 18 will look good, I've got a 15" rail on now
You should include 50,000 Swiss clips and 1 rail cover again
>>33547736
Atlas is goat
>>33547670
>In order to take full advantage of the range of the 7.62 cartridge, the current draft requirement for the IBR calls for a 1×6 variable optic.
at least they got that part right
>>33547748
>and 1 rail cover again
yep
i'll make sure its fde or something
>>33547670
I wish they'd go 243
>>33547750
The important thing is that they're thinking. Maybe, just maybe, a varmint caliber isn't a good idea to go to war with!
>>33547770
5.56 is not a varmint caliber. It is less than ideal for long range shooting tho.
>>33547766
If it was a 6mm SPC or grendel parent case, youd be talking.
>>33547781
>5.56 is not a varmint caliber.
but it really is tho
>>33547804
you're a varmint
>>33547748
>will look good
>Gecko !!SwolK2XvRqH
>>33547748
>last year's model
>>33547784
No I want 243
>>33547804
No it's not. It was developed for use against humans. Its parent case the .222 remington is a varmint caliber.
>>33547811
#shotsfired
>>33547824
>.222 Rem is varmint caliber
>.223 Rem is varmint caliber
>5.56x45 is NOT varmint caliber
>.22-250 and .220 Swift are varmint caliber
makes sense
>>33547811
this tbqh famalam
>>33546852
>>33547670
>7.62x54r
>>33547846
.223 is not a varmint caliber
>>33547846
You ever seen what a .22-250 does to a varmint?
>>33547859
elaborate please.
>tfw the weapon system you've been investing in for your whole life is now obsolete
I guess it's time to build an AR10.
>>33547858
Weapons like the PKM and SVD are being used to hose people across valleys and "researchers" think that we have a caliber gap as a result.
>>33547756
Kek
>>33547811
>skele
You and the Canadian are friends huh ^)
>>33547813
DELETE
THAT
>>33547863
.22-250 and .220 Swift are common calibers for long range prarie dog and coyote removal.
>>33547867
it was developed for the military for use against humans. It was later upgraded to the 5.56 spec.
>>33547875
I lost my anal virginity to an AR-10 barrel
>>33547884
That's nice, anon.
>>33547881
Not rly
>>33547875
>not investing in belt fed rifles for suppression use
I smack my head
I dunno what this idiot used for paint but it acts more like clay than anything else and it fucking sucks
>>33547877
I totally forgot those two. We need to bring 30-'06 back then.
>>33547394
Yeah man. That's exactly what I was thinking. I have one of those poorfag KAC lowers too. I think it would look awesome. Shit, now i feel like I need to do something different. I'm not intentionally trying to bite your style senpai.
>>33547949
Nice even that is an improvement
>>33547952
So which intermediate caliber do you think will get adopted?
>>33547952
>>33547981
didn't mean to reply
>>33547897
>m lok rails on mg42
The Nazis really were ahead of their time
>>33547972
I'm gonna finish it tomorrow when my BCG gets here, I'm kinda liking the black with some sand accents
Need to figure out how to get the shit in the recesses of the rail tho
>>33547981
>>33547987
Something in the 6-6.5mm range
>>33547949
Probably Aervoe
>>33547897
does it work?
>>33547670
Member when this used to be fuddlore? I member.
>>33547248
Jesus do you fire that upper single shot by charging it every shot? Your CH latch is beat to shit.
>>33547305
Use a marker and ruler to draw a line on the gas port. Then do the same on the center line of GB hole. Line up the marks.
>>33548047
Bought it like this m8, there are literally 0 things on the gun I would have done if I had started it from scratch, except maybe the Larue gas block, that was a decent choice
>>33548070
Why the fuck would you ever buy that?
>>33547434
>tuning fork
>>33547670
SCAR time? Why don't those faggots just wait for LSAT?
>>33548084
$$$$$$$$$$$$$$$$$$$
It was 500 dollars for the rifle, optic and light I already owned. Sold the UBR, BCG/CH, and Magpul ring for 360 bucks, bought a BCG/CH for 95
>>33547949
Strip Clean and a tooth brush
get to er mate. rinse with hot water and try not to get super high from the fumes.
I should buy another AR
>>33548138
Buy this AR
>>33548138
Buy an AR10. AR15s are obsolete.
>>33548138
>>33548118
I forgot to get literally anything while I was at fucking walmart for qtips
I've basically used half a bottle of old polish remover
>>33547949
just stripped my gun, PITA. be careful with that stock, i melted my car stock with paint stripper before.
>>33548138
>>33547952
Don't worry about it. Do it up how you wanna do it.
>>33548152
>used half a bottle of old polish remover
lol wtf
>>33548144
What's the purpose of a skeletonized AR?
>>33548204
Weight savings, obv. If you were a real OPERATOR you'd know oz = lbs
>>33548171
>Zombie edition guns and ammo
How did we get to this point?
>>33548201
I'm not joking when I say this is genuinely the shittiest paint job I have ever come across. It's literally like someone stuck a light layer of clay to it. Comes off if you scratch at it
>>33548220
>>33548217
I just want to break it
>>33548228
I just want to burn it
>>33548228
>>33548223
try using something other then nail polish remover yah tard. Get some aircraft paint stripper. Coat its, leave it set 5min and strip with ease
>>33548237
>>33548228
>>33548237
Always liked the Fish2k. Truely unique.
>>33548251
>>33548268
Just stop
>>33548250
It already strips easy, it's the wiping shit that gave me a problem
I'm probably gonna have to soak the rail in something though
>>33548228
>>33548237
>>33548251
kek, i was watching that fs200 on gb. i was hoping it would go cheap bc of how garish it was. its actually more expensive bc the paint job (which is well done, to their credit). its been relisted a bunch of times, their reserve price is too high.
How cheap can I get a KAC rear sight for? I only have $40 after the rest of my build and I really want a KAC
>>33548311
Aerosol citristrip and cleaning toothbrush
>>33548327
maybe $50-60 for a well used one. i have one im not using, if i were to sell, id probably ask $55 shipped
>>33548327
look on ebay, ive gotten them brand new anywhere between $40 and $70
>>33546958
I have a fde afg I'll sell you for $30. Bonus, it'll be FL to FL so we'll screw the man.
I heard someone wanted to try this with their charging handle but didn't have a mill.
So I just ordered a gdi r com e model mount and a Burris 332 to use the rebate for the free fast fire on for 223 dollars and the mount for around 45
How did I do?
>>33548367
>fde
I need a black one m8. Also you can get em 20 shipped from EE
>>33548327
I got mine for $33 off ebay 4 months ago
>>33548389
Awful
>>33548374
our resident dremel "expert"
>>33548374
yeah
>>33548374
Does it work?
>>33548389
not bad
>>33548409
why?
>>33548420
blowback
>>33548420
because boof said it works
>>33548374
What does that do? A poor man's gas buster?
>>33548433
he said it works better than a gas buster
>>33548402
Why ;_;
>>33548419
The mount seems really good for the money but I'm unsure on the scope and red dot
>>33548443
does it?
>>33548443
Why didn't you try it on a cheap handle first instead of ruining your BCM?
>>33548455
Burris is good stuff.
>>33548461
we'll find out this weekend.
the main problem is, i didn't have a gassing problem before.
>>33548409
As bad as this looks, it still does what it's intended to. Let me know how it works for you.
As I said, I was presented with the epitome of gas blowback. 8" pistol length DI on an M16 lower with a suppressor.
I tried all the available "gasbusting" charging handles on the market. Everyone designed theirs to divert gas from the top except PRI.
Gas doesn't escape from he top at all. It comes from the bottom of the charging handle between the charging handle and lower. I simply made PRI's design more effective and found it to outperform everything by a substantial level.
I've reached out to a known company with a prototype for mass production. Patent pending. Expect it Q3 2018.
>>33548464
that's not my style
>>33548477
i don't get much gas as is but i'll report back with results
>>33548477
You could also just drill a hole in the side like the Griffin armament SNACH
>>33548395
spray paint it, whatever. btw, get citristrip for you paint removing needs.
>>33548499
I tried theirs. Based my idea around it and modified it a bit to let more gas out.
Square openings are easier to machine and more effective.
>>33548470
That's what I've heard for the price but I haven't looked at the sight in person and have zero experience with most optics especially prism optics with a fixed 3x zoom.
Just seemed like a great deal for 223 since I get a free red dot worth that much just about.
Really don't like the weight on the ar332 tho but we'll see. I'm not sure if the Rcom mount is heavier than the one it ships with or not.
>>33548498
Turn up your gas and see if you get more blow back. For testing pruposes.
>>33548547
This, I want to see how it works with others.
You can also always use gasket silicone to seal the upper half, forcing ambient gas out the bottom and ejection port as well.
>>33548019
Yes
>>33548583
full auto?
>>33548571
I wonder how a tank bore excavator would work on an ar.
>>33548596
Bring 308 and find out
>>33548603
>gas block with small chamber for bore evacuation built in
>>33548615
Thats right spicaroni, these sights go out to 2km so you better watch yourself and your 5.56 manlet bullets.
>>33548197
Just depends on whether I get the money for it before I change my mind I suppose. I'm always changing what I want over short periods of time.
I can feel the need for an M4gery creeping up now too.
>>33548719
do it
>>33548725
Yeah like that.
Needs a new stock tho tbhfam
>>33548748
yes it do. but im waiting to find a deal on a used B5 or LMT sopmod.
>>33548751
Why a used B5? those are cheap to begin with compared to an LMT.
>>33548751
Mines better
>>33548767
because i can get it cheaper. All im gonna do is spray paint it tan and beat the shit out of it. This rifle isn't meant to be anything more then something I loan out like a whore to my noguns friends and treat like shit to get that "muhreens" used look. Even gonna buy a used as fuck Trijicon TA01NSN ACOG for it.
>>33548571
I've tried all the gimmicks including drilling and milling charging handles, nothing made much difference except RTV gasket like your pic. It's the most effective by far, and is the cheapest by far.
Geissele Super CH made more of a difference than the specific gas-targeted gimmicks because the things are made so oversized that they seal better. People complain about them being too tight.
>>33548793
Suppressors and suppressor accessories are gay.
Post more 10/22
5 year old daughter wants to coyote hunt, and I have spare AR lower.
Thinking 16-18" LW barrel with FF tube and bipod.
Recommendations for bipod and glass for targets < 100 yards because lol Southern scrub.
>>33548927
>>33548927
>>33548927
>>33548927
New Thread
BACK! dad want to watch some movie on my laptop and then got too sleepy halfway thur.
now i'm gunna stay up and make sure he wake up at 3:30 for his new job
>>33547434
sure but i'd rather you go be meyer 249 saker like >>33547473 said
>>33547727
> RETURN OF BATTLE RIFLE
> RETURN OF 7.62 REAL FUCKING NATO SERVICE WIDE
> 7.62 ONCE AGAIN WILL GET TO WRECK SHIT OUT OF OPPONENTS SERVICE WIDE.
ALL OF THOSE M80BALL WOUNDS OR POTENTIALLY NEW SUPERIOR 7.62 ROUND
YISSS!
POTENTIALLY 5.56 AND 7.62 AMMO MARKET WILL BE SHAKEN THE PRICE WILL CRUMBLE AND SWELLS!
MFW PIC RELATED
>>33547750
yeah but i hope whatever 1-6 they go with have overbuilt eyepiece to tube attachment cause i have seen too much broken eyepiece sitting off degree to body tube.
>>33547988
made me laugh. 10/10
>>33548793
this.
RTV unbeatenable to this day.
>>33548948
>>33548961
> NEW THREAD TOO EARLY
> MADE BY ANON (NOT ALLOWED)
> NO LINK TO OLD THREAD
GG M8
>>33548961
>266
>99
are you retarded?
>>33548897
Only da best u kno
>>33548990
You want me to get on my trip and make a new one faggot?
>>33548897
1-8x Accupower
>>33548389
fine.
you did fine.
look forward seeing it getting used and aged.
>>33549028
> actukally is tripfag!
doubt.jpg
All put together
>>33548948
>>33548961
daily reminder anon is too retarded to make a thread on 4chan properly
sad!
>>33549102
Welcome to the 21st century.
>>33549102
Did you post a sbr ps90 in a recent acquisition thread the other day, you summer fag?
>>33549130
No I'm probably SBRing a Vector soon though.
>>33547520
That's just like your opinion man
>>33549150
>sbr vector
>over ps90
Get out.
Unless you do both. Then it's ok.
>>33549168
Since when do you have any business telling people how to manage their finances or get aesthetic guns?
>>33549175
Literally who the fuck are you
Get out of my thread
No, get the fuck off my board you literally who
>>33548897
we all know your daughter didnt walk up to you and goes
>daddy! me wanna shooty shooty baddy yote!
and it actuaklly went like
> daddy come to daughter room while she play dolls and tea
> hey my babby!
> yea daddy! do you want to join me in my te-
> HEY! DO YOU WANT TO HUNT BADDY YOTE YOU HEAR HOWLING AT NIGHT WITH YOUR DADDY! IT WILL BE FUN I PROMISE!
> o-ok daddy do you want to join me for te
> daddy run out of daughter's room naruto style.
> inb4 coyote too smart for your poorass bait and you never saw hide of yote's ass.
be sure to post dick bone with timestamp when you get one if ever.
>>33549175
buy my afg what the fucking fuck oriental cat
remembering when i was freshman maybe we had this new guy who would run around naruto style in gym class.
what is it with spics and anime?
>>33549195
>it's angry
kek
>>33549239
nigga i need one in BLACK
I'll give you 15 dollars for it
>>33549262
do you have anything to trade? let's just forgo the money part, I want to get rid of it.
Anyone want an unused BCM Keymod forgrip?
>>33549270
I have a 20 round sand Pmag and a Hex grip
>>33549295
pmag is a deal
>>33549295
just to be clear, we're talking magpul picatinny afg right?
>>33549318
pickatin rale pls
Where in FL are you
>>33549327
I4 corridor
>>33549334
Ew Orlando
I'm all the way down in PBC my guy
>>33549373
yeah I figured. I'd meet halfway, or just mail it. or not. whatever.
>>33549395
Email me we can figure out mailing. Wanna get it soon to see if I like AFG or if I'm gonna need to get a VFG before May
[email protected]
>>33549395
also, not Orlando, I'm closer to 27
>>33549406
email sent
Kinda new to guns. And I just just got my first beater AR. But it only came with one really shitty magazine.
Anyone know any good deals on magazines? I don't care if plastic or metal as long as they work.
>>33549481
pmag
Hoosier there's a 115 dollar LMT on EE rn
>>33549481
http://palmettostatearmory.com/ten-10-speer-223-remington-64gr-gold-dot-ammo-20rd-box-ten-10-magpul-pmag-30-5-56x45-mags.html
fluffers hurry up and make a new thread this fucking sucks
>>33549643
u make it
>>33549481
go to botach and the more mag you buy of one type the cheaper you will pay per mag.
buy either 10+ OKAY ind USGI drylube coated or 10+black magpul.
you could even make them a offer and if they accept you potentially save even more.
>>33549709
Botach sells products they don't even have in inventory. They charged me for an order and shipped it five weeks later
>>33549789
oh!? wew! that sucks.
when did that happen? what was the product?
i
>>33549789
I actually ordered a pair of 5.11 gloves from Botach on this past Saturday and received them today. I'm still in shock that I got them so fast from Botach.
>>33550077
I ordered from them once or twice by now and they always were fast. one of time was ordering 10 hk translucent mags for $100 for dad when they had this deal going.
ARs are gay
>>33550267
Yeah, they are 5 hours away from me (Vegas - Phoenix)
>>33550638
WTF I hate AR's now.