Eternal QTDDTOT I was wondering how I'm supposed to find

>>33265594
Grab pistol grip.
Extend stock until it reaches the crease of your elbow.
You have just found the optimal length of pull.

>>33265594
where its comfy and repeatable should be your goal.
> the sharp knurling left busted capillaries on my shoulder. Is there a solution other than wearing a T shirt and not caring about it?
not having glass skin might help

Why do I always shoot left with glocks?

>>33266161
Because you touch yourself at night.

The fuck was the name of that Soviet( I guess you could call it ground attack) aircraft that had a bomb bay filled with like fifty machineguns pointing directly down?

>>33266854
Fire hedgehog

Hey guys I just picked up a gen 3 g19 for 534$ after taxes at gander, how'd I do?

>>33266161
There's a gap between your two hands in the grip. Something about the angle and grooves. Close the gap up and it won't be so prone to hook left.

File: 1437780419069.jpg (35KB, 400x400px) Image search: [Google]

35KB, 400x400px

>>33265594
Just got a Norinco SKS (Spike) in fairly nice condition for about $420~ after everything. It isn't as cheap as they used to be but did I get jewed or no?

>>33267933
Not bad in my area. But I wouldn't call it a "good" deal.

Lurker here.
Im trying to make a medikit to carry around because it can can come handy.

What products should i get?
Literally a any scenario medikit talking about stabbings and shootings are common here.

>>33268482
Also one for my house i guess because outside some alcohol, cloth, cotton, bandaids, flu and cough medicine with 2Kg of paracetamol i have nothing.

>>33265594
Where can I get a decent ARM gas block? I've heard of Blackthorne, but I can't find anyone else selling them...

>>33265594
why not make the stock wear a little t-shirt?

File: 8mm Porn.jpg (61KB, 577x577px) Image search: [Google]

61KB, 577x577px

>>33265594
would it be a bad idea to use car oil on a gun?

>>33265594
is there any reason to buy brass cased bullets over the cheaper steel ones for plinking with my 9mm p226?

>>33268482
Depends, how rich you are.

A defibrillator would be nice.

Cocaine would also be really important.

A bunch of antibiotics

IV and solutions I guess?

Locking pliers could save a life

Hmm, a tourniquet or some rope

Clean bandages and a decompression needle.

Needle and thread

Add a scalpel and a few medical textbooks and you're a fucking doctor.

>>33265594
The rule of Thumb with a collapsible stock is to extend it to the crook of you elbow. For most people this the first notch from the receiver. You should also get a better stock. The basic bitch stock will work, but they rattle a lot and the sling ring likes to snag straps on your LBE. Get something streamlined that already has a pad on it.

>>33265594
I have a Bushnell Scopechief IV, top of the line glass for the 1970s. Is it still worth putting on a hunting rifle, or do modern scopes blow it out of the water?

>>33267933
Jewed hard, you can now build AKs with Palmetto armory kits for $480.00. You can build ARs for the same price. For what they cost now, SKS' and Mosins need to stop. You have waaaay too many better options in the same price range now to pay that much for some beater than the last 30 owners didn't take care of.

>>33268690
No, feel free to use away. 5w-30 and 10-w 30 are fine. Just know that they cook off fast.

>>33265594
https://www.youtube.com/watch?v=n62_ukH4Hik

This video adresses your exact question.

>>33268778
only real reason is saving the brass to reload your own. Otherwise just buy the cheap steel and aluminum. Also steel is a harder metal so probably harder on your gun, but not to any meaningful degree.

>>33268482
You should get some basic first aid training and carry something like a SOF TQ and some gauze.

Strong very strong emphasis on basic first aid training or even going to a class from someplace like Dark Angel

>>33268817
Not rich but i can spend $100 monthly on useless stuff.

I guess i will have to increase the budget since $100 wont get me even a half of it.

>>33268817
>Cocaine
Dont you mean codeine?

>>33268901
If he bought it to crapco it into an AK I would agree with you, otherwise you're missing the point my dude.

Maybe this was just bait, but people dont buy mosins out of ignorance of the price of ARs.

>>33268941
Codeine would also be nice, however good luck getting any.

Cocaine works better for local numbing if you're doing any work on yourself as well as it's simply easier to get.

Be careful though, it smells really good.

>>33268482
Get what you will need, take first aid classes if you don't know anything.
It could be beneficial to carry a suture kit and stuff but unless you know how to stitch shit up, it will not be used.

I carry basic shit, bandaids, alcohol wipes, gauze, poultice. I also have liquid skin.

Like I said, take a first aid class so you can put the stuff you get to use.

Are there any special snowflake rifles left? I really like 70s-80s aesthetics like the Galil, AUG, Daewoo K2, AR-18 ect but everything now is marketed to be as tacticool as possible, are there any rifles that are still in production and sold in the US that are like these?

File: $_3.jpg (70KB, 500x500px) Image search: [Google]

70KB, 500x500px

Is 3mm of polycarbonate enough?

Better options?

File: based-1-750x375.jpg (45KB, 750x375px) Image search: [Google]

45KB, 750x375px

>>33269364
I'm asking for a friend btw

I've been told that pepper spray is almost gurantee to blow black in your face to some degree whenever you use it. Does pepper gel solve this issue? What brands should I look into?

File: Based-Stick-Man-Pepe.jpg (96KB, 640x320px) Image search: [Google]

96KB, 640x320px

>>33269364
Forgot link.

http://r.ebay.com/E4bI0e

How much would a functioning Sig 550 run me?

>>33269370
>Aux armes, citoyens!
>On ne passe pas!

>>33269204
AUGs are still pretty niche in America thanks to them only having one local manufacturing plant and not having seen a lot of media coverage in the west

File: 1488741519823m.jpg (263KB, 1024x1024px) Image search: [Google]

263KB, 1024x1024px

>>33269364
/k/ pls

>>33265606
FPBP

My dad is retired MSG and this is what he told me.

>>33269402
Yeah, I fucking hate the current models though. The only ones are these tacticool railz models with 16" barrels, I would love a classic A1 model but its not produced, just 50 models of muh tacticool

>>33268690
a non-detergent machine oil will stick better and not run off

File: 1489178478990.webm (2MB, 400x226px) Image search: [Google]

2MB, 400x226px

>>33269444
Bump

File: 1489178470990.png (347KB, 558x1052px) Image search: [Google]

347KB, 558x1052px

>>33269444

File: 1489178671346m.jpg (94KB, 1024x768px) Image search: [Google]

94KB, 1024x768px

>>>33269444

File: 1489176593210.png (382KB, 1563x1242px) Image search: [Google]

382KB, 1563x1242px

>>>>33269444

File: 1489176829307.gif (65KB, 387x312px) Image search: [Google]

65KB, 387x312px

>>>>>33269444

File: 1489180854886.png (373KB, 519x548px) Image search: [Google]

373KB, 519x548px

>>>>>>33269444

File: 1489106752028m.jpg (126KB, 1024x916px) Image search: [Google]

126KB, 1024x916px

>>33269444

File: 1488778772324.gif (3MB, 640x360px) Image search: [Google]

3MB, 640x360px

>>>33269444

File: 1487651326253.jpg (155KB, 1024x873px) Image search: [Google]

155KB, 1024x873px

>>>>33269444

File: 1487650726623.jpg (144KB, 460x342px) Image search: [Google]

144KB, 460x342px

>>>>>33269444

File: popo.jpg (46KB, 568x365px) Image search: [Google]

46KB, 568x365px

what's this stance called?

File: 1487644010450.jpg (193KB, 617x624px) Image search: [Google]

193KB, 617x624px

>>33269444
>>>>

File: 1489213349783.png (432KB, 1304x1818px) Image search: [Google]

432KB, 1304x1818px

>>33269444

>>33266161
Because you're jerking the trigger.

>>33269022
Maybe not, but I'm a performance guy. If he's the type to dress up and play soldier than it whatever. The price becomes arbitrary and depends on how much he's willing to spend to play out his fantasy. But from a price to performance point of view, yep, he got ripped off big time.

File: FNX-45-Tactical.jpg (842KB, 958x639px) Image search: [Google]

842KB, 958x639px

Why does this thing have so many names?

I've seen it to by FNX45, FNP45, FNH45 and some kid called it a Tac 45


I know there is a civilian and tactical version, but I've seen slides that have the civilian name on it decked out like the tactical version.

File: IMG_7739.png (117KB, 268x322px) Image search: [Google]

117KB, 268x322px

I want to build a Shovel Ak in 7.62, I have the ability to build most of the smaller parts like the trigger group and dust cover but I still need things like the barrel and gas assembly, any recommendations on what type of parts kit to go with? I already asked /akg/ but they were useless.

>>33268482
You should only buy what you actually know how to use, and then take a first aid class or even an EMT cert. course if you have a lot of time. There's no point in having sutures in your kit if you can't stitch a wound.

File: 40d9354e583d39c1676196f61694f281.jpg (2MB, 3504x1970px) Image search: [Google]

2MB, 3504x1970px

This is only tangentially /k/ related because it was a milsurp item but I sold something on eBay and it says I'm waiting for payment to be received and it sold yesterday. Is this like..normal? I've never sold anything on eBay before but some doomsday prepper gave me 80 shekels for my ILBE assault pack kek.

File: iTxhSJw.png (376KB, 473x631px) Image search: [Google]

376KB, 473x631px

Can I hunt rabbits and shit with 9mm?
I know .22 LR is recommended because it's cheaper but a light 9mm won't nuke them or anything, right?

>>33270688
>lol only 9mm

>>33270113
http://www.northeastshooters.com/vbulletin/threads/179192-DIY-Shovel-AK-photo-tsunami-warning!

File: IMG_6985.jpg (67KB, 712x717px) Image search: [Google]

67KB, 712x717px

>>33270724
Anon please.

>>33271043
Well they certainly won't explode if they are hares I guess but I don't know how much you'd be able to recover to eat, especially if it nicks their guts.

>>33270688
9mm FMJ is fine for small game. You'll loose some meat if you're a bad shot.

>>33270198
Lately I've gotten instant payments form most buyers, but it's not unusual for payment to take a day or two. Message them if more than three days go by and don't ship anything until you're paid.

>>33271815
Cool thanks mate.

File: IMG_6241.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

I've got a new HK pistol and the slide isn't consistently locking back after the last round. Is this just the pistol breaking in or possibly the ammo being under powered? I haven't had any other malfunctions.

>>33272639
weak magazine or underpowered ammo
are you shooting tula?

>>33272690
Bite the bullet 9mm and armscor. Basically just the usual cheap range stuff.

File: 0fbb2e34df3ad40edca11262a9a0716d.jpg (72KB, 736x736px) Image search: [Google]

72KB, 736x736px

>>33266161

Does anyone know where to buy parts for the older IMI Jericho 941's? Or at least if they can take parts from the new production IWI ones?

File: Flood get out REEEE.jpg (154KB, 599x1060px) Image search: [Google]

154KB, 599x1060px

>>33269686

>>33272639
Does the slide lock back fine when the firearm is empty and youre just finger fucking it? If so it could be your thumb is riding the slide release when you're shooting, causing it to go home instead of locking back. Otherwise it could be a weak magazine spring. Take your mag apart and stretch the spring out some
>>33269683
Low ready. Not really a stance

>>33272898
I always keep my finger as on second picture, and hit low left.

I just got a new glock 19, my first handgun ever. I'm a pussy so the recoil is a lot for me to handle and stay on target while also remembering all the other fundamentals (shooting Speer Lawman 115gr). Is this due to the 115gr vs 147gr, or a new stiff recoil spring on the glock, or am I just a wimp and need to get used to it? Also, any other recommendations for a new glock owner?

>>33273266
Glocks will take awhile to get used to the takeup in the trigger. Once you get that on point you'll do much better, practice dry firing in your room. Lawman ammo is probably a bit hotter than your standard 115 grain ammo from WInchester. Buy some of that and see how it feels, 100 round box from Wally World. If 115 still bothers you, then yes you're being a bitch.

How does temperature affect ammunition? I'm relatively new to shooting, and have fired just a few 9mm brands. Today, someone recommended me Winchester, because it burns a bit cleaner, but out of 100 rounds, I had ~5-6 rounds fail to fire the first time around, 2 of which happened within the first 15 rounds. It's fairly cold out now. Just cold enough for it to be snowing. Is the temperature affecting the ammo? Did I get a bad batch? Or was I memed into getting crappy ammo?

Related question: what do I do with ammo that fails to fire the first time around? Is it safe to attempt to fire again? I feel like discarding live ammunition is unwise.

>>33273310
Is your gun clean? It shouldn't be affecting the rounds. You might have a functional problem with the gun itself.

>>33273266
I don't know what you know about technique, but make sure that
>your hand is as high as it can get on the grip without getting slide-bitten
>the gun is setting in the web of your hand
>the barrel make a perfect line with your forearm
>your supporting hand is pulling back on the firearm, while your dominant hand is pushing forward slightly

>>33273266
>am I just a wimp and need to get used to it?
this
>>33273310
>Related question: what do I do with ammo that fails to fire the first time around? Is it safe to attempt to fire again? I feel like discarding live ammunition is unwise.
if its rimfire you rotate it so the firing pin hits another part of the rim. if its centerfire you can try again or just toss it. if you are getting a fuckload of light primerstrikes the ammo is the most likely culprit, then its you, as in you riding the slide so the guns not in battery or the gun itself which is fairly rare and means factory defect or old as fuck and parts need to be replaced.
wwb isnt shit but its not great either.

>>33273310
Winchester ammo is great, and common for range/competition. I'm a Southern fag so I can't speak on the winter conditions, but it sounds like it's a problem with your firing system. THey are safe to fire, reload them and drive on with your frozen self

>>33273310
>>33273371
Just as a total guess, if your gun isn't clean and it's cold it's very possible that the oil on it is getting a little gummed up and causing failure. That's something you have to consider when selecting motor oil for older cars, so I can only imagine it would apply to guns as well since there's much less oil and much more dirt/crud.

>>33273414
this is true
your not supposed to oil firing pins for that exact reason

File: 2q0vcjc.jpg (637KB, 1600x1200px) Image search: [Google]

637KB, 1600x1200px

>>33273310
>Related question: what do I do with ammo that fails to fire the first time around? Is it safe to attempt to fire again? I feel like discarding live ammunition is unwise.

I've heard you aren't supposed to fire ammunition that has a pin-mark from the firing pin. But I have no idea if that's true or not.

pic related.
Hopefully someone answers this for me as well.

>>33273371
It's clean. I clean it every time I go to the range. Granted, I generally don't do anything beyond a field strip. I've only taken out the housing for the extractor and firing pin once. I've got a Glock 26, not more than a year old. The ammo I've been previously shooting was American Eagle, and Remmington. I've shot ~600 rounds in total, and this is the first time this has happened. Should I take out the housing for the pin and inspect it?

>>33273377
>>33273396
Shit. I'd rather it be me than a malfunction of the gun.

>>33273196
No the slide locks back fine when I'm finger fucking with it, I'll have to check my grip when I'm shooting.

>>33273481
>Should I take out the housing for the pin
hell yes you should. You should do it just to do it, because it's easy and that's what makes Glocks GLocks. If it is a mechanical problem(doubtful) you can trouble shoot it and replace the part yourself for cheap. Worst case scenario you need a new firing pin spring which is cheap as fuck anon

>>33273539
It's probably your right thumb parallel to the slide. It's pretty common, I do this with my GLock 35 quite often

>>33273558
Cool. I'll break it open again. One last question: which parts should, which should NOT be oiled?

Tremendous thanks to all the Anons who replied. It's much appreciated.

>>33273596
The only place you need oil is a single drop on each side of the slide, where the grooves are cutout to engage the lower. Put one drop on each side, and let it run down the length of the slide. Do not oil the inside of the firing pin housing, or any parts of it. I like to get up in there with a pipe cleaner or Q tip myself, which i suggest you do as well

>>33273640
Awesome. Will do, man.

File: vietnam m1 helmet.jpg (85KB, 611x512px) Image search: [Google]

85KB, 611x512px

any good site to buy a m1 helmet?

>>33273435
That looks like a light primer strike. Personally, I'm stupid enough that I'd load them and fire again. However I've heard the same about being too risky for various reasons. It's really up to you.

File: 2011-09-02_19-04-13_785.jpg (1MB, 1840x3264px) Image search: [Google]

1MB, 1840x3264px

>>33265606
>it doesn't even get to my elbow

do I just have freakishly long arms or something?

also, while we're on the topic of ARs, what sights do you guys recommend? in the process of building a basic bitch rifle and stuck on sights. should I get back up irons first or just go with a cheaper optic? I would ask /arg/ but I feel like they'd just meme me to death for not building a $1500 rifle for my first AR. fuck you, I like my cheap horsey rifle.

>>33274389
Irons before optic. If your optic fails, you're s.o.l. there.

>>33274389
how cheap is "cheap" for optics?
even a set of basic bitch magpul mbus is like $80. better things are going to be 100 for just the rear or front. as for irons just dont buy airsoft or anything of amazon thats less than the mbus new. im not saying buy mbus just that they are the minimum level of quality you want.

>>33270039
What's the benefit of coated Stainless Steel versus carbon steel like Glock uses?

>>33273640
Did what you said. Coming back to say I got great results. Fuck ton of grime up in the housing for the firing pin, and all up around the extractor. Lubed up the slide, and feels like a brand new gun. Barrel looks better too. Thought it was experiencing some normal wear, but turns out it was just hard buildup that the Winchester just blew loose.

Learned a lot today. Feels good. Fuck all excited to go shooting next week.

File: doorknob.jpg (31KB, 500x380px) Image search: [Google]

31KB, 500x380px

Possibly a dumb question, but I've been looking at some Wolff gunsprings, and I'm wondering what effect on recoil changing out the recoil spring will have. I've heard that CZ shooters often use lighter recoil springs for some reason, but wouldn't you want a heavier spring to reduce recoil? How many lbs can you mess with before you start getting reliability issues? Is ammo a concern with spring weight, and if so would common 115/124gr ammo cause problems?

Also, are there any websites where ammo manufacturers are compared? I've always noticed that some brands shoot and pattern differently than others, and I'm curious to see if some brands like PPU are really loaded hotter than say Federal, or if it's all in my head.

>>33274498
fullsize cz75s have a fuckload of options for spring weight you can go as low as 11 up to 22lbs. if you are going to be shooting factory ammo just stick with whatever the stock for that gun is. with the extremes people are tailioring reloads for them. where they will run great with that bullet and probably choke with normal crap.

the most obvious difference is how hard the slide is to pull back

>>33274547
Weird. I thought there would be some tangible effect on the way the gun recoils.

>>33265606
Not him, but the 6 position stock doesn't even reach my elbow. Are rifle stocks any longer?

>>33273435
Any semi-automatic with a free-floating firing pin will have a primer strike when the bolt drops as the gun cycles. There just isn't enough force to actually set off the primer. If you put a mag in your AR-15 and drop the bolt, eject the round, and look at the primer there will be a small indent in the primer.

That's .308, and those are pretty deep dimples, so if you're firing it out of your durr rifle, it's probably just a light primer strike. On one hand, nothing really tragic can come of you trying to use it again, on the other it's like 40 cents. Generally I just discard blemished or defective ammo.

I just got a vz58 today however under the muzzle break the crown of the threaded barrel is fairly rough. Is this a problem and should I go and get it refinished?

File: 1397339718716.jpg (87KB, 1091x883px) Image search: [Google]

87KB, 1091x883px

>>33265594

Is the EAA Windicator the hi point of revolvers?

I bought a S&W 4506 recently and noticed that whenever I cock the hammer for the first time and pull the trigger, there's a click 2/3 of the way through the pull. If I let off the trigger and try again it goes away, and it doesn't click after an actual shot. What is it and is it something I should worry about?
Also when I shoot it, the muzzle gets dirty as fuck really quick and none of my other guns do that as much, if at all. Is that a trait of .45 or is it a problem with the gun?

>>33275501
I don't think so, I've shot it and it's a decent little revolver for the price.

Are there no longer CZ-612 parts *anywhere*?

I have an opportunity to get an extremely cheap one but I'd like to be able to get a barrel for it that's long enough to make it useful for clay shooting. The entire earth appears to be backordered.

>>33274389
The first thing to do is identify your goal.
Many sof don't even bother with back up irons any more because after their multiple operations optic never failed.
>anecdotal, feel free to disregard

If you want basic as fuck then get irons. It'll be cheapest. For 300 more you can get a vortex strike eagle 1-6 variable zoom and fill a lot of roles.

If you're plinking closer a burris red dot will suffice.

Further out I'm not knowledgeable.

Where the fuck do I go shoot without being bothered by a range in Kansas? I don't own a farm or know anyone who does.

>>33268778
if you're range firing i've seen some not let you use steel, usually because their disposal company doesn't recycle it

Anybody know where I can get fake hands like the secret service?

how cringe is it to open carry a big ass buck knife on my belt?

>>33276137
Assuming you're serious, used store models, hobby shops, theaters, those things they use to display rings.

Essentially every other place you've seen a fake hand.

Or just make a mold of your own hand for maximum realism.

>>33275887
Go ask a landowner for permission. Kansans are friendly and very progun. Just be kind and clean up after yourself.

t. Kansas landowner

If you see somebody getting savagely beaten up by a group of people, can you shoot them? Or is it only if your own life is in danger and not somebody else's life

>>33276261
In this day and age, you're probably safer in the law's eye's (see; corrupt liberal doucebags' eyes) to record the incident with your phone, while trying to chase them off. And if they turn to fight you, then you're possibly in the legal go-ahead to defend as you see fit.

>>33273897
http://www.mooremilitaria.com/helmets-body-armor.html

>>33276186
>used store models/display rings
I don't know what shops YOU shop at, but as far as I know, that's those white wooden or plastic or cloth mannequins. That's not what I mean at all, I mean like rubber skin-looking hands.

>theaters
Like the broadway kind? I don't exactly live near NYC or broadway, there's some theaters with plays and stuff in my nearest city; as far as I know (I don't go there particularly regularly or anything, but I've been to one or two with somebody else because they wanted to go over the last few years) they don't exactly have spare prop gift shops in the lobby.

>hobby shops
What kind of hobby shops? I get pipe cleaners and mason jars at joann fabrics because there's one 5 minutes from my house, but as far as I know they don't sell rubber hands, I've seen a few 'geek' hobby shops at local malls with dnd/wh40k/comicbook etc.. stuff and THEY don't sell rubber hands.

Could you be more specific?

>>33276159
Dundee/10 also, don't.

>>33275887
Contact this guy obviously >>33276192.

Does Delta Force/CAG/ use the mp7/a1 or any smg/pdw?

>>33276366
This is not a hard problem to solve. If you want to buy local, those are the places that will have fake hands.

Otherwise,
>http://www.ebay.com/itm/Bloody-Horror-Scary-Halloween-Prop-Fake-Severed-Arm-Hand-Haunted-House-KY-/112105095082?hash=item1a19fbffaa:g:3iQAAOSwaB5Xun~A
>4 dollars shipped

You get the idea.

What are some good flashlights under $15?

Also how do i look for a good one?
What should i be looking while searching for a good one?

im a first time rifle owner and i just picked up a New Haven 250C .22lr today for 20$, the only problem being that it was missing a magazine.
i tried looking around but im having trouble figuring out exactly what magazine to buy as i dont know if theres any specific things i should be looking for when picking one out
if anyone knows what i should buy or has some tips on figuring it out id appreciate the help
thanks in advance

Should i major in nuclear engineering?
I took a few bio classes and the only parts i enjoyed involved chemistry, and i like math. I think it would be an interesting thing to work on and from what i hear the pay isnt pay.

>>33277593
i bought one of those 3 dollar chink shit LED """"tactical""""" flashlights from amazon and it still hasn't failed me. Super bright too.

File: 22lrStinger.jpg (37KB, 600x600px) Image search: [Google]

37KB, 600x600px

>>33265594

Anyone ever shot Stingers out of a 10/22? I just picked one up today I'm gonna bubba the shit out of and was going through the instructions just for fun.

They say specifically NOT to use Stingers in the rifle because the extra length on the case can cause it to stick and the case to explode or some shit like that. Sounds to me like there was 1 or 2 people who had problems with it and they're just covering their asses on this but I'd like some more testimony. No real reason, I've got plenty of other 22lr ammo, I'm just curious.

File: 1480226047473.gif (3MB, 275x293px) Image search: [Google]

3MB, 275x293px

>>33265594
Ausfag here, looking at getting my first rifle for general purpose target shooting and hunting roos, what's the consensus on a good caliber to be looking at?

I'm not sure .223 Rem would cut it against kangaroos, would something in 6.5mm Swiss be adequate? It seems like a very nice target round with good ballistics, while not being as heavy recoiling as .30 caliber cartridges.

>>33279307
you need a special permit to shoot roos

I'm a manlet and I have my gun to be manoeuvrable.

Is there any noticeable change in accuracy between a 10' AR and a 16 inch one?
I intend to suppress it, if that makes any difference.

>>33279343
Depends, what ranges are you planning on using it at?

>>33279422
I worry mostly about 200 to 300 meters, since that's as far my range allow.

I just bought a Nikon P223 3-9x40 for my AR. How bad did I fuck up guys?

>>33270039
JESUS CHRIST those are all different models not the same gun like literally goto their website kid

>>33279447
Accuracy typically won't be affected, bullet drop and muzzle flash will obviously be more problematic compared to the 16" barrel.

>>33279477
its fine as long as youre not precision or long range shooting. the idea that you need a $500 scope to plink or hunt under normal circumstances is retarded.

File: why.png (33KB, 915x447px) Image search: [Google]

33KB, 915x447px

I live in Aurora, IL and want to fucking die. Are pump action rifles too meme or are they legitimately fine?

File: breaking wrist down.jpg (176KB, 480x640px) Image search: [Google]

176KB, 480x640px

>>33273209
Low-left usually means you're either squeezing all of your fingers in anticipation of the gunshot, you're jerking the trigger, or you're breaking your wrist down when pulling the trigger(pic related)

Keep your wrist more aligned with your forearm, and try, as carefully as you can, pulling the trigger as smoothly and carefully as you possible.

If you're still low-left, adjust your sights.

>>33279665
>Semiautomatic Rifles are prohibited

What the fuck

Also, I don't own one but I've shot them. They're generally fine, but god fucking damn. Nobody will judge you for owning a meme-gun if everything else is banned.

You can't even get a MINI

>>33279685
I'm left handed too so it's even shittier.

File: 28264321.png (2MB, 1299x800px) Image search: [Google]

2MB, 1299x800px

>>33265594
Is this a press posing photo, or do they actually shoot without earpro?
This is supposed to be iraqi government soldiers, not some improvised gorilla unit that grabbed basement guns.

I'd imagine that especially sharpshooters would feel a negative impact on accuracy when anticipating bigger caliber firing sound?

>>33278609
it's only really a concern if you have a match grade barrel, as they WILL stick in the chamber/fail to extract sometimes.

through a regular 10/22 all that happens is faster wear on some parts, really.

File: 1303099026486.jpg (30KB, 319x418px) Image search: [Google]

30KB, 319x418px

Why did the mercenary company cease to be a thing? What became of the soldier of fortune? Is the modern "private security firm" his closest modern inheritor?

>>33280171
>mercenaries
when you have huge huge fuck off million man armies
>an extra battalion or wo is going to make a difference
Also flintlocks firearms basically killed off the need for high skilled melee infantry if your talking about swiss pikemen and landschnekts and shit

/k/ I have a question
I've searched around on the internet for an answer to this question but have only found rules for it for naval captures
Here is go
Hypothetically I am a member of one of the five branches of the Armed Forces of the Unites States of America
I am an infantryman who is walking through the streets of some third world shithole
All of a sudden is see a dead enemy combatant
Thing is this enemy combatant has a kickass sword on his person
Getting to the point can I legally take that sword and bring it back to the US with me?
Also if the answer is yes for the sword question can I take his wallet as well?

>>33280623
Give it back, DeShawn

File: 1351718800464.jpg (114KB, 1280x800px) Image search: [Google]

114KB, 1280x800px

So I had my first lesson at a shooting club on Saturday. Shot 25 rounds of .22 with a revolver and 25 through a Ruger pistol that looked awfully similar to a Mark 3.

In short, I loved it. I started off quite accurate with the revolver at 25 meters, good grouping to the right of the target center, being less accurate with the pistol.

In my country I can have handguns but they have to be shot at a club. There isn't a huge selection in the gunstores. This means ordering in any handguns.

My hands aren't that big, I couldn't reach the slide release with my thumb on the Ruger. Small hands jokes aside, what handguns are the most appropriate for those with not-big hands? I always like the m9 but don't want to go wasting time ordering in potential handguns to find they aren't ergonomic. Any ideas?

Charger wallpaper unrelated

File: ppsh2.jpg (78KB, 327x444px) Image search: [Google]

78KB, 327x444px

>>33266854
This beauty? Some 80 PPSH's.

>>33265594
say your in a situation that you not longer have lube to lube/clean your gun can you use moter oil or tube grease to lube it up?

Do you guys have any suggestions on how to hide a pistol from people? I live with my parents who are very anti-gun people for no real reason, and I want to purchase a pistol for home security but if they find it I feel that they will kick me out. I'm thinking about getting a safe to store it in but any suggestions are helpful.

While target practicing, how many shots do you usually put through a target before changing it?

>>33281939
Unless you have small kids in the house, I honestly wouldn't worry about any kind of safe. It'll draw more attention than necessary. Just stick it in the bottom of a backpack or something and throw it in a closet or under a pile of clothes or something. For bonus protection, add some filler in the backpack over the gun and then put a dildo on top. If they do snoop through your stuff, they might stop once they see that. The only drawback is they might end up thinking you're gay, but your parents sound like the type that would be fine with that.

>>33281944
Depends on how well I can keep track of my groupings. I usually do about 10-15 shots per target before moving on to another one, which is why I like papers with multiple targets on them.

>>33281939
Do you happen to have a a nightstand with a drawer?
You know were normal people hide heir guns when not inside carrying cases of safes?

>>33265594
Big Questions: What's the minimum voltage and amps required to do welding works on semi auto submachine gun kits? I'm busy choosing between three of the following:
>Pitbull Ultra-Portable 100-Amp Electric Arc Welder - 110V

>Zeny MIG-130 Gas-Less Flux Core Wire Welder Welding Machine AC Current MIG 130 60 AMP Automatic Feed Unit

>Zeny Commercial MIG 100 Welder Flux Core Wire Automatic Feed 90AMP Welding Machine

File: 20170312_144232.jpg (162KB, 566x366px) Image search: [Google]

162KB, 566x366px

So I just ended up getting a new revolver, it's old and a bit beat up, only question I have is that it's definitely a .32 revolver. My question is whether it can shoot .32 s&w or is it some kind of other round?

I bought a box and .32 s&w fits but I just don't want the thing to blow up in my hand

Also only marking are "National Arms Co N.Y. U.S.A."

>>33266854
I believe it was a Tu-2, but don't quote me on that

>>33281944
I bring a set of coloured markets and mark my shots per mag, once a spot it too full I switch out.

It's also fun for gun game targets.

>>33269661
What shirt is that?

File: 1489121495208.png (546KB, 768x768px) Image search: [Google]

546KB, 768x768px

>>33269661
/pol/ please stay

>>33273196
>Take your mag apart and stretch the spring out some

Wewlad

why does /pol/ and friends not understand the words 'shall not be infringed'?

>>33276357
$85 to $150 for a damn old piss pot helmet.
ouch.

>>33268817
IV kit is stupid unless you're actually a nurse/doctor. You're quite likely to just make the situation worse unless you know what you're doing.

Unless you have real training, all you should really have are bandages, antiseptic spray, a tourniquet, and scissors.

>>33283975
jill your self fem-nazi

I want a vcog but not for that price. What should I get that's similar but won't get destroyed by a scar

>>33278300
New Haven is/was a budget brand of Mossberg , try crossing it with Mossberg part.

>>33278609
They will not explode. They might jam.

File: henry_020617.jpg (2MB, 4912x2152px) Image search: [Google]

2MB, 4912x2152px

Can someone recommend me a good set of sling swivels and a swing for my Henry BB Steel?

I'm not really sure who's who in this industry.

>>33282395
Why would you ask minimum voltage? Do you experience voltage drops on your supply side? If so, you really need to complain to your power company, as that's really unacceptable.

As for required amperage, you just need to check the output voltage of the welder and do some simple math. For example:

If the welder operates at 10v, and you have a 110v supply, you could run a 150A welder.

But if the welder worked at 20v, you could only use a 75A welder on a 15 amp supply circuit at 110v.


NOTE**

This is assuming you're running on a NA standard 15 Amp circuit at the NA standard household voltage of 110v. If you're using a full phase 220v circuit or a higher amp circuit you'll have to do some different calculations.

Could I buy some cheap steel cased 8mm mauser and run it through a resizing die with the decapping tool removed to make the ammo chamber easier?
Link related, it's the ammo: http://www.sportsmansguide.com/product/index/mauser-8x57mm-js-323-bore-non-wwii-dimensions-fmj-170-grain-20-rounds?a=1741208

>>33285068
If it were brass, maybe. But with Steel cased ammo, you're basically SOL

How can I find out if my gp-5 filter is safe to use?

Can .357 magnum reliably penetrate a windshield and retain lethal capability?
All I could find was 9mm and .45 ACP can't, 40 S&W can, and some LARPing autist with a bow and arrow that has a .357 magnum cartridge and striker in the bowhead can't. I'm not accepting the bow testing as valid since the thing had literally no barrel.

>>33285207
Check on youtube or see if you can find FBI ballistics data.

I want to get a ventilated rib barrel + chokes for my Mossy.

There's 20, 24, and 28-inch ones. Does it matter at all? Can I compromise range with maneuverability/weight by just going with the 24" middle road?

Are minuscule tremors common when the trigger breaks? I'm trying my damnedest to get rid of them, but it's incredibly frustrating. I can keep an empty casing on the gun when dry-firing, but I'd like to do better than that.

>>33274447
MBUS are actually the sturdiest folding BUIS around per testing, blowing Troy and Diamondbacks out of the water in terms of MOA shift when dropped on concrete.

People think they're cheap because polymer but they're actually strong as fuck, affordable and lightweight too.

>>33285335
Makes sense I guess, the polymer flexes and returns.

File: 1481304865779.jpg (86KB, 640x640px) Image search: [Google]

86KB, 640x640px

>>33285253
Fuck I love 10mm now.

Time to buy a Witness.

Got about 500 dollarydoos, should I:
finish my AR build
get an aimpoint for my AK
get another Glock

>>33285261
What do you want to do with it? Pattern is mostly a function of choke, not barrel length. Longer barrels point and swing better, shorter is easier to carry.

Is it possible to rechamber a Sten in a meme caliber? Cuz I want a Sten in a meme caliber.

>>33274992
>Are rifle stocks any longer?
Yes

>>33284322
muh collectible helmet.

>>33285972
You can get an RPG in 7.62x39mm.

So yeah, give a guy enough money and you can get that .300 AAC Sten.

File: 0f5881cea8b2a56b61972456a15d5c6b.jpg (295KB, 1024x768px) Image search: [Google]

295KB, 1024x768px

I never hike with my rifle and my range requires it to be kept in the case until I'm at a booth so I have no reason to get a sling right? I don't want to buy shit just to have it if I don't need it.

>>33286026
I was thinking 5.7x28, but thank you.

File: 2Copycat.jpg (1MB, 4032x1649px) Image search: [Google]

1MB, 4032x1649px

What should I do /k/?
I bought an AeroM4 enhanced upper by accident (the one with the proprietary hand guard) and don't know if i want to spend the money on an aero one to finish another build or, sell it and buy another upper and geissele rail for my BA 223 wylde mid.
Thanks for the replys!

>>33276192
I'm a pretty social guy, but there isn't exactly am easy way to bring up "as a complete stranger, can I shoot guns around you and your family? "

Any recommendations?

>>33285919
Finish your AR. Then you'll have 3 guns.

>>33285919
No reason to get another Glock.

And I dont like unfinished projects, so I'd recommend finishing the AR build, even though I dont really like AR/AK pattern rifles that much.

>>33284716
Does anyone know about this?

>>33286155
>Hey do you mind if I plink somewhere out in the corner of your land? I'll be sure to clean up after myself.

>>33286511
>the man regretted agreeing after anon came out with his 20mm anti tank rifle, but did not want a confrontation with a man princess carrying a goddamn anti tank rifle

>>33286809
>you'll never plink at T-34s

>>33286042
if you are actually using a gun a sling for a rifle is just as necessary as a holster for a handgun.
even if its just at the range you want to shoot with the sling on during practice since you need to learn what your sling does. if it gets in the way of reloading or the sight picture you have to change techniques to compensate.
however it sounds like your gun is a pure rangetoy so you dont need a sling if you dont want it.

Let's say you only have one hand.

How, in a standing position, would you most quickly, efficiently and safely work the bolt on a bolt action rifle with only one hand?

Anyone know where I can get a Hungarian PA63 in 9mm mak? I'm having trouble finding them anywhere.

If I have a 1911 with some weird ass mechanical problem that Kuhnhausen doesn't seem to have the answer to, should I make a thread about it or ask here?

guys.... has there ever been an Alas/k/a meetup? maybe a campout during the summer?

File: 43SpRQ0.jpg (133KB, 500x343px) Image search: [Google]

133KB, 500x343px

>>33288867
>going to NA's Siberia for fun

>>33288119
Really really really big bipod.

Why are all Glock owners black? Look at this white skinned black man.
https://www.youtube.com/watch?v=dAN5mnDFG1s

>>33288119
>>33288906
This, but with another leg. They basically make "portable benchrests" with tripods.

>>33288894

>maybe a campout during THE SUMMER?

Learn to read you non alas/k/an.

>>33289109
>See guys it's above freezing until night falls! Let's see those normal human beings make fun of our only half frozen desolate wasteland now.
It's honestly shocking how out of touch you ice savages are.

Are the stoner side-charging AR uppers any good?

>>33283501
It might be .32 ACP

>>33276408
Maybe possibly. DEVGRU most definitely has MP7's in their inventory, I would imagine some are floating around delta team rooms as well. Also, USSOCOM just released the requirements for a new PDW program. It reads like a SIG MCX spec sheet, much like the LVAW project that the secret service was pushing.

File: AE8409E6-5C30-4D2C-BE37-5B91A3FB34C6-3424-000002F6B7257CED_tmp.jpg (15KB, 240x320px) Image search: [Google]

15KB, 240x320px

Do this work with pt 92?

Anybody know why my mags aren't accepting the last round? I got 16/17 in and no matter how much I push, the spring stops at 2/3 of the way from the last round.

>>33291203

Get stronger.

What would be considered standard/preferable magnification on optics for different ranges?

>>33269683
is the Steyr Aug chambered to fire 9mm?

What size bullet is used in that gun?

File: 1487629879393.jpg (89KB, 600x648px) Image search: [Google]

89KB, 600x648px

Requesting s bullet size comparison chart from as big as possible to add small and everything in between
> pic somewhat related

File: 1489174872763.jpg (164KB, 528x1028px) Image search: [Google]

164KB, 528x1028px

>>33291908
*as small

File: 1488646495345.jpg (665KB, 1394x715px) Image search: [Google]

665KB, 1394x715px

Bump

>>33284716
sling swivels are lame, go with this.

https://brassstacker.com/No-Drill-Harnessed-Rifle-Sling-HENRY.html

>>33265594

Stock position is up to you. Try shooting some off hand groups at the range, and figure out what you like.

As far as a butt pad, UTG is what I use, mostly because they are cheap, and I need a rubber pad so I can lean them in my safe without them sliding. They are $5-$8.

File: tay the AI on zoe quinn.jpg (20KB, 331x347px) Image search: [Google]

20KB, 331x347px

>>33269444
based Tay

>>33275501

Ironically, Hi-Point owns Charter Arms, making them the Hi-Point of revolvers.

EAA is always better than price tag indicates, because of currency issues.

Is there a way to find the postage price if it's not on the label?

I was charged $50 in shipping for a carbine. It went ground and had lackluster packaging. I would like to leave appropriate feedback if the faggot only used $20 to ship it

"Recently" got a hold of a Gewehr 98, refurbished by the Weimar Republic in 1920, fancy and beautiful rifle.

Now, I want to attach a scope to this without drilling and/or tapping the gun, I've heard of LER mounts(?) but where and how do I get them?

File: obrez4-cover.jpg (22KB, 410x227px) Image search: [Google]

22KB, 410x227px

Nofuns Califag here

I'm trying to understand the laws here to see if an obrez would be legal. Anyone know how the laws work?

>>33293785
Obrez would be considered an SBR unless you used a completely new receiver (I think) or if it came chopped from the factory (factory Obrez top kek)


I can't wait to move in a couple months and own scary black gats

File: 1488568944739m.jpg (158KB, 835x1024px) Image search: [Google]

158KB, 835x1024px

>>33294012
Goddamnit

Alright well, what laws deal with custom made/3d printed "le sp00py ghost gunz!!1!!" Here?

File: hi power art.jpg (115KB, 656x654px) Image search: [Google]

115KB, 656x654px

is the MkIII a worthwhile choice over the MkII for Hi Powers?

>>33265594
Have on old H&R single shot 20 gauge. The barrel wiggles from side to side when it is open, but seems solid when its shut. Do I have a loose hinge pin? Or is this normal? The problem was made worse after I put slugs through it

File: 1485917600607.jpg (18KB, 269x247px) Image search: [Google]

18KB, 269x247px

what is this stuff on magazines

>>33294219
absolutely nothing worth it m8, even 80% lowers are a grey area now and the registration requirements are getting tighter by the year

unless you live in an area with based rural sheriffs (some of them refuse to enforce) stay straight edged.

How often should I be going to the range?

>>33294886
also, any Coloradofags here?
>inb4 fuck off we're full

I'm moving to Northern CO and I might bring my Savage MkII squirrel gat along with me. Is there any paperwork or registration stuff I have to deal with?

>>33294831
For using paint pens to neatly dot in number markings. Don't worry, it's just a tacticool thing.

Any .45s (preferably double stack) worth looking into? Kinda bored of just having the 1911.

File: sku6633fweb.jpg (32KB, 358x497px) Image search: [Google]

32KB, 358x497px

I'm interested in buying one of those Russian tanker helmet things, with the built in mic and earphones. Does anyone know of any guides or if it's even possible to convert them to regular old 3.5mm jacks so they can be used today? I guess they might also need a power source, maybe they could be connected via USB or something. I really don't know much about electronics, so unless there's a guide out there detailing what to do I'll be lost. I know it's been asked on /k/ before but I don't remember if anyone had a solution.

File: 15995450_1165428106908403_362503693_n.jpg (47KB, 500x500px) Image search: [Google]

47KB, 500x500px

>>33294382

>>33268901
Except all of those PSA AK kits are sold out and always go fast when restocked. It's not helpful when you can't actually buy them.

>>33269498
The AUG CQC is the only one with a 16" barrel. Maybe 17", I don't remember.

File: 76058_464969593605_242181938605_5357973_5060215_n.jpg (87KB, 608x720px) Image search: [Google]

87KB, 608x720px

If I put a grippod on my pistol is it legally a foregrip or a bipod?

Asking for a friend...

>>33276159
Depends where you live

Rural? You're fine
Urban? Mom'll call the cops
Mix of both? You'll look like a tweaker

>>33281213
M9s have beefy grips, as with any double stack 9mm, I have fat hands and find them perfect but small handed people may not, try a single stack 9mm like a P38(or a P1) PPS or a STAR

>>33283501
I almost got a similar pistol, They're .32 S&W

>>33293287
Bump

File: barrel.jpg (7KB, 440x330px) Image search: [Google]

7KB, 440x330px

Alright anons my google skills are failing me. I have a mossberg 500 that I want to put an accuchoke barrel on BUT I have the 8-shot version. I called the factory today and they are out of stock and it would take up to 12 weeks to get one. Any ideas where to look beyond armslist/gunbroker/gunsamerica (i've already tried those)? pic related is what it looks like but it's from an expired posting

File: 20170313_191709.jpg (1MB, 2560x1536px) Image search: [Google]

1MB, 2560x1536px

>>33295808
Wouldn't really recommend it, if you aren't at least a little thrifty with electronics. Last time I looked there was like one guide out there, but I remember it being not that helpful. You're pretty much going to have to use your own mini speakers and wire. But by all means try, I'm pretty novice at fucking with electronics and it didn't stop me.

>>33294886
good fucking lord i hate my state so much
I live near Sacramento, and even tho the sheriffs around here are chill idk if theyd do that.

Do 3d printed guns or homemade weapons require registering? Whats the federal/state law on that?

And side note, is there a comprehensive guide to the fucking backwards batshit crazy gun laws here? I feel like id break one without even fucking knowing ffs

>>33296002
They sell out in about an hour. If you weren't a mong you could set a notify me type thing and grab one before they sell out. That's what I did. It's not really that great of a rifle but it's much better than their freedom line of ARs.

>>33265594
Q: Is there any point to building an M4gery (14.5") or should I just get a super short like 11"? Or not even build an SBR and just get some sort of bullpup like an AUG instead? I basically want a rifle to fulfill a home defense type role and my 16" will not fit through doors.

>>33292158
My guy has swivel studs though anon.

>>33296468
depends on how you use it anon.

>>33297381
Ask your LGS if they can order one from a FFL distributor for you.

Can any CZ pistol use the same mags?

File: 327-Federal-2-300x285.jpg (9KB, 300x285px) Image search: [Google]

9KB, 300x285px

It is my understanding that magnum cartridges have not only longer, but also thicker and stronger cases than the round they're based on. So my question is theoretically, if you were to cut the brass down to the length of the original round, could you use it to load that round as hot as a magnum, or close? Assuming the gun were strong enough and there were enough room for powder.

>>33265594
Anyone ever order from Contact Concealment? How long did it take for you to get your product? I've been waiting way longer than their 4-6 week turnaround time

Anyone know of any lightweight compact sleeping bags for innawoods for my kit? I live in the South

>>33265594
Is there a rough guide anywhere for the thickness of sandbags required to stop different types of rounds?

File: 1488045261300.gif (62KB, 211x227px) Image search: [Google]

62KB, 211x227px

>>33265594
I made my own retarded thread, but between a S&W Bodyguard and LCP II, which should I be buying? I know the Bodyguard has had time to get the kinks out, while the LCP II is still working through some of theirs. Let me hear your opinions on them please.

>>33265594
What % difference would heavy barrel make compared to normal barrels in a bolt action rifle?
>first shot accuracy
>10 round group fired in 1 minute

Is the benefit of a heavy barrel worth the extra weight if you wish to fire it standing/unsupported?

File: 1466542597106.jpg (59KB, 480x461px) Image search: [Google]

59KB, 480x461px

>>33301267
Lunch bump for some help. Need to get some info by tonight due to deals

What is a cheap yet not shit red dot, specifically for an AR?

>>33301464
>Is the benefit of a heavy barrel worth the extra weight if you wish to fire it standing/unsupported?
no
its going to be harder to fire standing since its heavier

File: 22hornet.jpg (2MB, 2448x3264px) Image search: [Google]

2MB, 2448x3264px

>>33265594
I inherited a Savage 340B in 22 Hornet from my great uncle and it was having ejection issues. Sent it to a gun shop and they fixed it, replaced springs, firing pin, etc. Brought it back to the range and it still isn't ejecting. Any ideas? Could it be the ammo? Has the dimensions of the 22 hornet changed much over the last 50 years? Enough that old hardware doesn't work with current casings?

Pic related

>>33296068
Just did a quick google, I just assumed those were more expensive, consider one of those rifles reserved and paid for I've wanted one since I saw Bruce Willis killing German terrorists in that movie, decease firmly.

>>33304167
Holosun, vortex

>>33304439
Broken, I'll dispose of it for you, bud.


Look at the extractor, it'll be at the 10:30 position give or take on the bolt, if there's no tooth, or it looks fucked up, needs a new extractor

File: dumb anime slut.jpg (8KB, 300x168px) Image search: [Google]

8KB, 300x168px

Would I be retarded to get a .300 BLK for my first rifle?
I mostly want it so I can share reloading stuff with the .308 win and .300 win mag rifles I also want.

File: 1025311_01_mossberg_model_250c_new_haven__640.jpg (74KB, 640x480px) Image search: [Google]

74KB, 640x480px

>>33278300
hate to be that poster but bumping this

the problem is the stock magazine has a rail on the back for ejecting it and dont know how to find a compatible mag that will fit and work with the system

>>33306857
is it really that hard to type "New Haven 250C magazine" into google? id understand if you didnt have the name of the gun but come on.
https://www.gunpartscorp.com/ad/68390.htm
first fucking result.

>>33306937
i was hoping some anon would educate me about magazines and id learn something, teach a man to fish and all that
but fuck it i guess

Can someone explain to me why Sig P230s are so cheap? I see tons of listings on gunbroker with awfully low starting bids and some are still under 300 with only a few hours left. Is there a catch, or is this worth looking into?

position of the stock really is for eye relief if we are talking about marksmanship

>>33279307
6.8 or 308 will take any roo down but you need a special permit to hunt roo

>>33265594
This is an honest question, but is there literally any reason to have a .22 other than killing rodents and practicing/plinking?

Because there are a fuck-ton of clones of "cool" guns made in .22 like the Chiappa M9-22 and the MP5 clone but I don't see a point in that. Is it just for fun's sake?

>>33304698
I got the extractor replaced at the gunsmith, its brand new

File: meangreenianmachine.jpg (57KB, 640x640px) Image search: [Google]

57KB, 640x640px

Does anyone remember what Ian from Forgotten Weapons other youtube channel is? The one where he talks about making his bunker house and bar tending and shit?

>>33307907
The Indep Spirit?
https://www.youtube.com/channel/UChmeWfLazv6CQcbBuD_4-HA

>>33308178
yes! Thank you

>>33285280
Re-asking. I'm not sure how to diagnose the problem. I've done some more practice, and eliminated a lot of muzzle drift when the trigger breaks by having a tighter grip, but I don't know if that's actually addressing the problem, or acting as a crutch

What happens if the timing is fucked on revolvers ?
If you push the cylinder into the correct position after you cocked your hammer, would it be safe to fire ?
What causes these issues ?
Could you still safely use a revolver if you regularly slammed the cylinder shut ?
If you do slam the cylinder shut, what parts would get damaged, and would they be easy to replace ?

can come one point me to a good sling with some normal buckle straps? hard mode: no clip/qd attachment/tactical bullshit

>>33309382
https://www.amazon.com/dp/B00NJC2N1K/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=RWWMPC1RV62D&coliid=I23E4DFNVSO74X&psc=1

Conversely, go to goodwill and buy an old duffel bag for a couple bucks and put carabiners on it so you can clip it to your gun.

File: 1489341864308-k.jpg (832KB, 2048x1536px) Image search: [Google]

832KB, 2048x1536px

What is this barrel length? Handguard?

File: 1489549030566.jpg (640KB, 2048x1536px) Image search: [Google]

640KB, 2048x1536px

>>33310323
a magpul afg is about 4 3/4" long

Does anyone have both a PCR and P-01? I'm trying to decide which to buy. Does the lack of a rail on the PCR make it much better for carrying or is it roughly the same?

Does the extra weight on the front end on the p-01 help noticeably with accuracy? I don't think I'll use a the rail, but if it's a little more accurate and doesn't carry any worse I might just get the p-01.

>>33310383
Thanks. So probably 18 inches not including the flash hider. Unless I'm post birth abortion retarded.

File: wm_9842016.jpg (70KB, 1072x716px) Image search: [Google]

70KB, 1072x716px

>>33265594
Would a hole like pic related be a deal breaker?

>>33310323
>>33310383
>Taking away her AWP and giving her an AR

Absolutely criminal, how am I supposed to defuse bombs like this?

>>33311061
Agree. That stock is fucking unobtainium though.

File: 7792941frontright.jpg (43KB, 1000x536px) Image search: [Google]

43KB, 1000x536px

>>33296002
while we're on the topic, what are their complete rifles like? I asked here one other time and someone said avoid at all costs, but all the reviews I read on the Gen2 model say otherwise. I read about the gen1 models having a few QC issues as well as being machined with tolerances too tight making them a bit more failure prone. also had parts not made in the US. apparently the Gen2 model fixes all that.

I really want an AK, but I live in a podunk town in the middle of nowhere and I don't want to take a chance I'll wind up with some beat to shit Century AK.

File: WP_20150306_017.jpg (51KB, 1024x388px) Image search: [Google]

51KB, 1024x388px

>>33310323
standard rifle length handguard 20 inch barrel. lets face it the proportions are all fucked up. the rear sights not a flip up its fixedhk style no way in hell are you getting a scope over it without the scoprings being 3 inches high.

>>33311810
Eh it is possible it could be a custom hand guard length at least.

I have magpul mbus flip up sights on my ar. at what range distance should I be zeroing my sights?

sup guys got a question

I've recently acquired a US vest with most of the writing faded off, it's faded enough to be illegible and I've had problems identifying it but I'm 99% sure it's an "enhanced tactical load bearing vest"

anyway, my question is this: is there a a field pack or "backpack" like thing I can attach to it? I've tried wearing a backpack over it and it just does NOT seem practical, straps getting tangled and rubbing shoulders raw etc.

before you tell me yes I know I'm a retard

>>33308178
ForgottenChannel
Those are some weird videos.

>>33311417
MFW i have two

>>33265594
I got a 0.35MOA 3 round group today.
Was on a bench with a bipod only, at 100 yards, with my Howa 1500 BA.
Is that good? I've only been to the range about 4 times so far.
I got 4 other sub MOA groupings too of a total of 15 groups (most of which were just over MOA, but some were horrible)

So i gotta do a survey for a college course, its pretty short like 9 questions.
Basically ive got to find out if anyone would be interested in a game set in the Korean war and im not getting enough answers to draw proper conclusions. if you got a minute to spare it'd be appreciated.
https://www.surveymonkey.co.uk/r/S59BTF8

Also to keep this a bit more relevant, outside of joining a rifle club whats the most cost effective way to get a firearms license in the UK, im in the burbs.

>>33265594
>will stock position affect accuracy to a meaningful amount? Or should it just be where I'm comfy

Trick question, it's both.