Could you shoot a .500 S&W out of a .50AE or vice versa?

No to both

>>32832057
The opposite may work since it's the same diameter but a shorter casing. Would need a moon clip

Yes to both

Maybe to one

That deagle isn't even chambered in 50ae.... but no mri only recommends 3 types of ammo used in the 50ae version none of which are s&w500 and you can not use any 50ae round in the 500... source: I own both

>>32832265
PIcs and also pics of the .50AE not fitting in the 500 cylinder

>>32832325
.50 AE is rimless, negroid.

>>32832341
So is 9mm

You can fire it out of a .357 or .38spl with moon clips

>>32832357
or swap the cylinder


curious what you can put through a 454.

>>32832386
.45 Colt and .45 Schofield

You can put all three through a .460

>>32832398
no 44 or 410?

>>32832357

So, my negroid compatriot, who makes .50 AE moon clips?

>>32832057
I was wondering how someone would figure out to glocknade a deagle brand deagle

>>32832411
No on the .44 and possibly on the .410

The Raging Judge Magnum does handle .410 and .454. Not sure on one chambered specifically for .454

>>32832422
I guess you could make one yourself

It's just a shim that fits under the lip

>>32832467
Make some, sell them, I'd by some from you, you fucking nigger.

>>32832422
Would also need the cylinder cut for it
If doable it would make 50 AE feel like lol9mm in comparison considering 2.8k ft/lbs vs 1.5k

>>32832489
>Would also need the cylinder cut for it

Why? It's a shorter round and exactly the same diameter

>>32832529
for the moonclips, shit doesn't fit in by magic

>>32832568

Actually looks like TKCustom cuts .500 S&W for .50GI with moonclips, .50AE might work

>>32832529
It's shorter and fatter. Will not fit into a 500S&W chamber. Cutting the chamber to fit the AE will fuck up using the S&W cartridges.

Damn it, the neck of the .50AE is actually a little more than .01" wider

>>32832448
Exceed the maximum chamber pressure, same as anything else. Would be curious to see how the gas system handles an overcharge though.

>>32832057
pretty much only revolvers have interchangeable calibers

>>32832357
Not without having the cylinder reamed.
9mm is a tapered case and thicker than 357

>>32832411
You can shoot 410 in a 460 bfr.
not a s&w though. The cylinder is not long enough.

>>32833512
There's plenty youtube vids of folks shooting 40s&w from a 10mm glock. It just headspaces on the extractor.

>>32833641
Well duh, the .40 was cut down from the 10mm because the FBI are pussies