Hey /K/ I have a 1927 nugget and the trigger is completely loose.

File: 1483302819086-1182280271.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

Bolt closed, trigger loose

File: 1483303127255360563244.jpg (1MB, 3264x1836px) Image search: [Google]

1MB, 3264x1836px

If the bolt is pulled back all the way, trigger springs up to here and has tension.
http://makeagif.com/ryKrXw

Stick bolt in pooper; report results. Godspeed.

>>32504405
Buy an AR-15.

Did you reassemble the bolt correctly?

http://makeagif.com/XWD_2T

>>32504688
As far as I know. It did this beforehand as well.

I can't get it out so I have no way to check.

>>32504680
Already do.

>>32504799
Can the trigger move up and down, like the trigger pin isn't in properly? Try pulling the trigger down towards the trigger guard.

>>32504899
It has about 1.5 mm of free moving. I already tried pulling it towards the guard and in, doesn't work. I can try with another pair of hands but I don't expect much.

>>32505032
Can you dry fire the gun? Or is it completely inoperable?

>>32504405
trigger retaining pin isn't in place.

>>32505047
It will not dry fire. The trigger just jiggles freely.

>>32505335
I will look this up.

File: nugget pin.png (769KB, 974x772px) Image search: [Google]

769KB, 974x772px

>>32505335
Is this it?

If so, the only way I can think of to get the stock off so I can access this is to dremel/grind through the firing pin and buy a new one. I can't access the screw near the butt end of the stock to get it out.

>>32505561
That's it. Honestly, before you try cutting stuff, I would try man handling the trigger first. If you manipulate the trigger, you should be able to release the bolt.

Try pulling the whole trigger towards the stock and down towards the trigger guard at the same time. Do this with the stock on the ground and muzzle pointed up so that the bolt can fall free. You may need to use pliers or something to get enough force on the trigger but it should release the bolt.

>>32504405
Hope you don' have a doggo cuz the atf is coming for your illegally converted machine gun