Serbu 50 cal single shot. Is this a meme gun or worthy addition

You would pay for some shit Royal None Such cobbled together after get pegged by Mark Serbu's daughter? What the fuck is wrong with you?
You deserve what happens to you when you try to grab ahold of that freshly fired 50 cal brass with your bare bitch hands.

>>32228770
I mean it could come in handy if a car decides to break into your house

>>32228770
An idiot designed it. An idiot who will most likely end up blowing himself up.

>>32228854
>>32228814

I was just gonna bump this with his dumb face

>>32228848
That's actually what I had in mind. To have some kind of long range anti vehicle weapon for SHTF without paying thousands

File: RN.png (510KB, 427x515px) Image search: [Google]

510KB, 427x515px

Come on anons what's the problem here?

This thing is hot trash

>>32228770
Is that a rolling block in .50, I really think he just copied that design and beefed it up for that

>>32229035
>Rolling block
Hahaha, no.

That is a threaded breech .50 BMG rifle.

>>32228871
>To have some kind of long range anti vehicle weapon for SHTF
You guys know kevlar helmets dont protect against psychic radiation right

>>32228770

It put up a poor showing in the latest RN video

But, that could be due to owner error with inadequate zeroing

I'd wait to see if there's a followup long range video

Repeated hits on a steel torso at 900 yards should be expected; it missed all

>>32228770
A single-shot bolt-action isn't THAT expensive.

>>32229063
Jesus.

>>32228871

.308-level is fine against thin skinned vehicles

>>32229081
Probably has to do with the varying breech face. Unless every carefully lapped it'll throw it off.

Gun is trash and for the price you may as well get an AR upper

File: wm_4822408.jpg (2MB, 4320x3240px) Image search: [Google]

2MB, 4320x3240px

>Single shot
>load round by screwing off a cap.

Just buy the .50 BMG side loading upper for AR-15s. Costs around the same anyway.

No idea why RN didn't just make a cheap bolt action single shot

There's nothing saying you can't make one of those for under 1000

>>32229119
Before anyone says anything about the lower, just build it on a steel lower if you're concerned.

>>32228770
>low budget arsenal
>50 cal
Choose one or risk death

>>32229119
ew just save you pennies and get a barret

>>32229119
Muh dick

>>32229184

.50 BMG really isn't dangerous, I mean the pressure is around .308 level.

It's just the recoil forces, which don't make the gun blow up, but can make the gun disassemble/break.

>>32229190
>$8k for a barret or $1500 for an upper
Youre going to be saving pennies for a long time

>>32229211
Tell that to the guy who bought a vulcan and got a bolt through his shoulder a couple years ago.

File: 1355270575683.gif (2MB, 320x200px) Image search: [Google]

2MB, 320x200px

>going cheap on a gun that fires a round that's like $3 a shot

Look if you can't afford the good .50s out there, you can't afford to shoot .50BMG period.

>>32229233

And a .308, or even a .223, will kill you with a failure.

They're all dangerous if not put together properly and with proper materials.

>>32229255
Theres a reason rifles in .50 bmg need to be large and overbuilt in comparison to .223 and .308. If you cant grasp why one is potentially more dangerous then the other two then buy whatevers cheapest and hope you never find out.

>>32229233
>vulcan
His own fault.

>screw in bolt
Never buy anything serbu. Ever.

>>32229219
You know they make more than one gun, right.

>>32232034
They do make a proper automatic .50, I just don't get why Mark Serbu daddles with this YouTube kid.

>>32232065
>exposed gas tube
Pass

>>32232075
Are you gonna get in CQB with it?

>>32228871
>To have some kind of long range anti vehicle weapon for SHTF without paying thousands
Semi would be better for that situation.

>>32232122
Well obviously, what else should I bring? An AR? I'm not shooting poodles.

>>32229198
Muh dick indeed.

File: zel-custom-t2-2.jpg (275KB, 3000x2428px) Image search: [Google]

275KB, 3000x2428px

>>32229119
These make my cock hard.

File: slide_5.jpg (35KB, 720x400px) Image search: [Google]

35KB, 720x400px

I've shot the Serbu single shot 50 (not this one) and it worked pretty well. We were getting repeated hits on a 20 inch plate at 1000 yards. 2 MOA with surplus ball ammo didn't seem bad to me at all.

File: SHTFconversion50.jpg (240KB, 1000x716px) Image search: [Google]

240KB, 1000x716px

>>32232371

File: a73aa3485d95bdc84eeb9d37083ea084bf0f9bed.jpg (1MB, 1280x1024px) Image search: [Google]

1MB, 1280x1024px

>>32232583
>tfw 20mm version never ever

File: ar15 to .50.jpg (23KB, 600x497px) Image search: [Google]

23KB, 600x497px

>>32229119
but how

File: RP-0030-P-2.jpg (48KB, 500x500px) Image search: [Google]

48KB, 500x500px

>>32233738
>use AR lower for trigger, hammer and fire-control group
>also grip and stock
>upper has a magwell on the side (because .50BMG doesn't fit in a .223 magwell)
>bolt-carrier picks up a cartridge from the magazine which is on the left side
>uses Accuracy International 5rd magazines for .50 and .416 calibers btw
>ejects out the right side

It's quite simple.
There's also single-shot variants which have no magwell, and you just load a cartridge manually from the breech.

>>32234915
It would be neat to get this and then mill out a custom steel lower that doesn't have a magwell. Would greatly increase the aesthetics. Also I feel like you'd want to find a buffer tube made out of something a little stronger than aluminum if it's going to have the recoil of .50BMG pressed against it

File: single shot lower.jpg (79KB, 800x600px) Image search: [Google]

79KB, 800x600px

>>32235584
There's Single-Shot AR15 Lowers which would work with the magazine fed upper, though I don't know which are steel, you'd have to look around.

Pic related would be a pretty good setup for putting a .50BMG repeating upper on.

>>32235584
>Also I feel like you'd want to find a buffer tube made out of something a little stronger than aluminum if it's going to have the recoil of .50BMG pressed against it
Shouldn't be a problem, the buffertube is doing nothing but working as a stock and working as space for the bolt to move back in when cycling.

File: images.jpg (5KB, 287x176px) Image search: [Google]

5KB, 287x176px

>>32229119
>ITT HUUUR SRBU MAKES SHIT
>DIS IS BETTER USE DIS
>recommends a .50.bmg upper from a company that has had reports of a KB over a .50 builder that next to barret is the most trusted,

MFW

>>32237533
Dumb phoneposter.