QTDDTOTT

Yep, more than enough.

>>32188089
Cool. Thanks

>>32188089
Not him, but what about .45 acp? Just wondering how much of a difference the velocity makes, since they're around the same weight.

>>32188085
For AR BCG:
If I have a melonited barrel on the way for a build, should I look to get a nitride treated BCG in the future? Right now, I've ordered a PSA premium phosphate/chrome lined one. Do the benefits matter for the BCG or is it just a different way of doing the same thing?

Also, I bought what appears to be a knockoff B5 Sopmod stock at a gun show on the cheap. I figured it wasn't a genuine one because it had no markings, but upon further inspection it looks like it is almost exactly the same as the real deal down to the o-rings for the battery compartments. The only major difference I can detect is that the QD sling swivel hole is not the same size. Is this some sort of production fuck up or overrun of the real thing, or just an oddball mistake on an otherwise close copy?

>>32188476
nitrided would be easier to clean and possibly be less picky about running it too dry.

The majority of owners would never put enough rounds through one to benefit from the possibly better wear performance of the nitrided bcg.

That said, it isn't like the nitrided ones cost that much more than a phosphated one, when comparing similar quality bcgs.

>>32188560
Thanks. The last point is all the justification I need to buy a nitride one for this rifle, and since I'll have a spare I guess I might as well build another gun.

>>32188256
A huge one. Speed is penetration.

I'm turning 21 soon which means I'm allowed to own a handgun in my state (shotguns are allowed at 18 but you have to wait until 21 for handguns). I don't know much about guns, I'm a 108lb female with child-sized hands and I'm not very strong.
What should I look for in a handgun? I want something I could conceal in a concealed carry purse for self defense.
I just feel very lost and unsure where to start

>>32188690
bought the wife a ruger lcp in .380 and she enjoys it. comes in pretty girl colors too.

>>32188690
I doubt that you couldn't own a handgun under 21 that said lots of people suggest revolvers for women for simplicity. That said I'm of the opinion that a healthy person can rack a slide on a handgun.
I would recommend against the super small handguns because they make it harder to get a hold of the grip and slide for manipulation. Also the smaller guns have rather strong springs. They also tend to have more felt recoil.
I would recommend steel guns that are reasonably small. Sig 238s are well liked because of the easy to operate slide and external safety. I would start there

>>32188085
>Going to Tennessee
>Packing for bear
>Not packing fire blanket

>>32189322
>lots of people suggest revolvers for women for simplicity. That said I'm of the opinion that a healthy person can rack a slide on a handgun.
One reason people suggest revolvers for women is that you can fire it from inside the purse or shoved up against your adversary. She can be strong enough to rack the slide all day but if the gun goes out of battery when she needs it that's not any help.

>>32188690
hk45/usp .45 compact

>>32188690
Get something small like a Ruger LCR or LC9s and get one of the bra holsters. That way you can hide it under your titties so if your purse gets snatched you still have a gun. If you do carry it in your purse, get a trigger guard for it so you don't shoot yourself looking for something in the purse.

>>32188690
I'd second p238, but I hate sights, sight radius, size (gets lost in hand), but if it's comfortable go with it.

>>32188085
Why is tungsten carbide used for APFSDS rounds when it's very brittle?

>>32189512
That's about two hours east of where I'm going

>>32188690
Whatever fits your hand, isnt too small or too heavy and probably 9mm. Revolvers can work and either 38 or 357 using the same criteria. Ask to find a gun that fits your hand if the clerk gives you trouble over it try another store oh and don't go doing any commie bullshit with it

>>32189838
Ceramics

>>32190006
If you want to do commie shit, need mak, or tok

>>32190022
Explain. I know nothing of material engineering.

>>32190050
Above my education for the specifics but hard and heavy tip with high velocity does better with going through steel and ceramic by not splattering as easily on hard surfaces by using a harder sharpened (comparatively) surface

>>32190036
Or looted arms of any sort like a lot of south and central America

Is the Tavor and it's new cousin X95 any good or am I better off getting an FS2000 or an AUG if I want to dip my toe into the world of bullpups?

>>32190050
Tungsten carbide is very hard, and very heavy. And APFSDS means that you are actually shooting a very fast and sharp arrow. When that arrow impacts, it has a huge kinetic energy (or in simple words, a lot of force due to it's weight being at high speed) concentrated in a very sharp point. That's why you want a very heavy material, because the arrow is slender yet heavy compared to, say, steel or whatever.
They also used depleted uranium for that task, due it's weight yes, but there are... side effects with that material.

File: IMG_20161202_233540_BURST001_COVER.jpg (1MB, 2448x3264px) Image search: [Google]

1MB, 2448x3264px

What rifle is this? This picture is from Narcos season 2 ep. 4

What should I do with my shooting stance if I'm right-handed but left-eye dominant?

>>32190245
Galil ACE

>>32190233
>implying pyrophoricity is a bad side effect

>>32190256
High visibility sights and practice pointing with an eyepatch for a few minutes a day. Or learn to shoot left handed also laser if you have rails or the grip

>>32188085
It is extremely unlikely that you will even see a bear in that part of Tennessee and even less likely that you will see a cougar.

Source: I live in Tennessee.

>>32188085
>black bear and cougar

Those can be fended off with 9mm. You should be fine.

Is a Vz.58 a good alternative rifle for someone who wants to share ammo with my AK-using friend?

I like it because it has a surprisingly large aftermarket and the AK aftermarket seems limited.

My friend says the Vz.58 won't fire in rain.

File: Thunder380_Duotone.jpg (51KB, 530x400px) Image search: [Google]

51KB, 530x400px

>>32188690
Bersa Thunder in .380.

My ex had one and she had smol hands. It's basically a clone of the Walther PPK/S

>>32190263
Thanks! I was getting a galil vibe but wasn't sure

>>32188690
something like a keltec p-32 or a beretta tomcat

>>32190486
pls answer

File: 45645675.jpg (69KB, 450x372px) Image search: [Google]

69KB, 450x372px

Do I have to zero flip up iron sights and if yes, how do I adjust them?

If they are zeroed in, can I put a red dot up in 1/3 lower cowitness and just align the dot with the sights, and get a zeroed in red dot?

>>32188256
>>32188628
Kinetic energy is 1/2*mass*velocity^2
Speed matters a lot more than mass

>>32190901
not always.

File: cz-usa-805-bren-carbine.png (191KB, 2000x1333px) Image search: [Google]

191KB, 2000x1333px

Does anyone have experience with the CZ-805? I just found out that they are sold in the US for only $2k, which is way less than I expected for that level of special snowflake, but I really have no idea what to expect from it.

File: A4[1].jpg (81KB, 800x532px) Image search: [Google]

81KB, 800x532px

Anyone know which FM/TM pertains to M16 sight usage? I was hoping to look up the correct .mil procedure regarding zeroing method and sight adjustment.
I'm no stranger to shooting with irons but I picked up a carry handle the other day I thought it would be interesting to learn how to use it correctly.

File: ar15 zero.jpg (349KB, 1600x1200px) Image search: [Google]

349KB, 1600x1200px

>>32190899
Yes, they must be zeroed.
Typical zeroing procedure for buis is:
>if elevation is present on the rear sight it is set to Z/zeroing or whatever the manual stipulates, RTFM as not many rear buis have adjustable elevation
>make sure windage if present on the rear sight is centered
>use elevation adjustment on the front sight to bring yourself to the desired point of aim and point of impact arrangement at the designated range
>confirm you are using a correct and centered cheekweld then adjusts windage on the rear sight if necessary
The zero is user preference unless you're .mil. I like the 25m but 100m or 300m are much more common.

>>32188690
>young female looking for guns
>4chan
>posts in correct thread

This is the same guy who lists his xbox gamertag as female

>>32192364
this nigger knows whats up

>>32190486
>wont fire in the rain

>>32190486
VZs are fucking trash rifles compared to AKs and even AR15s chambered in 7.62x39.

My buddy had a VZ58 that wouldn't even fire unless you lubed it between every round. Total garbage.

Be a real man and get a Mini 30 if you want to share ammo with an AK.

>>32190901
So would that mean you're better off with 9mm than .45 acp? Not trying to start a shitfest, just genuinely curious.

>>32192492
Yes. This is exactly why .243 is used to hunt grizzly and not 45-70.

Retards who throw around the basic kinetic energy equation with a total disregard for everything else involved in killing an animal are just that: retards.

>>32190486
Century put out a large number of vz2008s the past few years and some of them are garbage, many more were just fine. No shocker there. I haven't had a single issue with mine in 1500 rounds that wasn't related to a magazine. Figured out which mag was garbage and crushed it, haven't even had a dud since.
The cz-usa and czechpoint rifles are supposed to be great if that's what you mean.

>>32190899
And yes you can use your irons get an approximate zero for your red dot. Obviously you should confirm independently though.

File: DSCN1723.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>220 Grain hard cast 10mm Buffalo Bore round
It's what I use in my Glock 20

would volunteering to carry the m249 make someone look like a cocky COD fag wannabe?

asking for a friend btw

>>32192602
Is he the shortest guy there?

>>32192646
nah average

>>32188256
45 buffalo bore hard cast work great on mn deer. It was 255gn i think.

>>32188256
>220gr going 700fps is equal to or comparable to 220gr going 1250fps

nope, penetration kills the large animal

>>32188085
Make sure it's even legal to carry a sidearm while hunting there.
Here it is illegal to carry a pistol while hunting modern firearm though it is legal to carry a handgun explicitly for self defense purposes while hunting archery season. Really silly but whatever. Also noteworthy is that it is illegal to dispatch game with a handgun in archery season.

I need help with reassembling my 10/22. I feel retarded for saying this but I can't get the fucking stock back on all the way.

More specifically, the action doesn't want to seat all the way into the stock.

I have disassembled it once before and did not have this problem.

I looked at the manual and all it mentions is having the safety halfway between safe and fire.

What the fuck am I doing wrong /k/?

4/K/ virgin here.

Give me the straight-skinny on replying to other users' post. What does green text mean?, ...and how do you make it green?

Every once in a while I see people holding paper with k/ and the date on it. What does that mean?

Any other helpful prints are appreciated.

>>32193180
>kys

>>32193180
Green text is usually used when telling a story or recalling an event or even quoting another poster. At least in my experience.

That piece of paper is for a timestamp and it lets people know when the photo was taken or to prove that the poster is real in some cases.

protip: lurk more

File: 1464399674843.gif (926KB, 500x579px) Image search: [Google]

926KB, 500x579px

>>32193180

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

Look what was bestowed to me, can't wait to clean this up

File: whitney wolverine.jpg (457KB, 900x1257px) Image search: [Google]

457KB, 900x1257px

Prospective first-time gun owner here. I have my eyes set on the Olympic Arms Whitney Wolverine. Any reason to not buy this gun, besides what I've already read from the archive? And how do I got about purchasing online, new or used? I live in California, btw.

File: bruh.jpg (69KB, 1920x1080px) Image search: [Google]

69KB, 1920x1080px

>>32193075
http://www.4chan.org/faq

File: whatsthis.jpg (170KB, 564x896px) Image search: [Google]

170KB, 564x896px

what is this on the buttstock, a pedometer?

>>32193785
It's a fish finder, combat controllers use them because it's a fairly simple way of identifying the location of mines

>>32188085
My Pomeranian is enough for cougar.
That load is fine for bear.

>>32188256
.45 super is a better choice if you must .45 for bear.

>>32193298
>Green text is usually used
>by redditors

File: 1466208600358.jpg (269KB, 500x500px) Image search: [Google]

269KB, 500x500px

Why the fuck is 22LR still so damn expensive? I just want cheap ammunition to shoot!

>>32188690
FN Five-seveN

>>32194616
right now, there are a few 22 hoarders trying to unload what they have. keep looking

>>32192450

Throw that Vz in the garbage. Your friend got a shit one.

>>32194663
I thought it was over, but I've been in a gun store in UT and all they have is $8-9/50 eley, a quick walmart check shown that walmarts are empty and have 0 stock. Minimum price on gunbot 8c/round.

I am going camping in colorado this summer and I want to bring something to protect myself. I am not 21,so I can't bring a handgun such as 44 mag. My question is if I bring my sks, would that be enough to defend myself if we were to encounter a bear?

File: mak.jpg (423KB, 2222x1695px) Image search: [Google]

423KB, 2222x1695px

>>32188690
Makarov.
Small, not very strong load, heavy slide, low recoil.

File: China doll.jpg (4MB, 2396x3204px)

4MB, 2396x3204px

>>32194710
my sks in question

Is Se/k/ret Santa still happening? I got a confirmation email and never got my assignment.

>>32194710
Get a .44mag levergat. They're light, handy, and will ruin a bear's day.

>>32194829
emails go out december 3rd

>>32194724
i would get a mag for it, but yeah it should do as a defence gun.
but make sure you say its for defense if park rangers offericers or anything like that ask.

Will the price of K31s ever drop, or are they bound to get higher?

File: IMG_0634.jpg (33KB, 320x320px) Image search: [Google]

33KB, 320x320px

>>32192504
>this is why .243 is used to hunt grizzly bears not .45/70

Someone's gonna take you serious and get Darwin'd.

>>32193683
Fellow /K/alifornian here.

Uhhh, Bruh, ... I'm so sorry, but it isn't going to happen. Not on the Roster. If you can find someone that got one into the state via the SSE or LEO exemptions that is willing to sell, that's about your only shot. ...or if you find a original Wolverine from the 50's. :/

>Fill 9mm magazine
>Jam uplula hard like an idiot to try to load the "last" round
>Dent the top cartridge below the bullet

The dent is only about half a mm deep, and it's not a +P round. The bullet won't be stuck for a few milliseconds too long and blow up, right?

What are some handguns that have a combined safety and decocking lever?

What's the best place to get a Hi Power? I've been checking Gunbroker, but I'm not sure if there are any actual businesses I should check out.

Why are cock on close bolt actions not very common? I cant think of any commercial rifles that use it, only a few milsurp

>>32188085
Are there cougars in tennesee?

Is it worth it to replace the AK's gas and recoil system to a AR-18 like system? (separate operating rod and two recoil springs)

>>32195723


it doesnt really offer any advantage except in rapid firing of the action, given most bolt guns date from before semi-automatics existed and they render working a bolt .1 seconds faster a bit pointless

File: scar.jpg (204KB, 3834x1248px) Image search: [Google]

204KB, 3834x1248px

What is the black section on the side of the gun behind the rails for? The thing with screws in it.

>>32191119
It's a heavy rifle that's accurate, shoots 5.56, is fairly comfortable, and comes with a good amount of features out of the box.

It has no bolt-release for some fucking reason though.

>>32192528
Well Atlantic selling a CSA one right now for about $1,000. I I just want to be able to share ammo with my friend while also being able to install a bolt-release, rail system, and new stock, and other doodads.

More of the straight up AKs I've seen don't have that kind of aftermarket, unless you wanna go 100% Russian.

>>32195895
I sont remember the right name but theyre basically set screws that hold the barrell in place. 4 in total, 2 on each side. Ive heard whatever the precision rifle version is has 6 screws.

>>32196674
Thanks.

>>32192504
>Retards who throw around the basic kinetic energy equation

Retard not knowing what is P = ma.

>The momentum presents a truer picture of the striking "force" of an object, while the kinetic energy reflects how long that force will be applied in said collision if it is one that is not completely elastic.

Retards
KEK

Are Henry Rifles good leverguns for someone who wants a cowboy rifle?

>>32189838
>Why is tungsten carbide used for APFSDS rounds when it's very brittle?
It doesn't. APFSDS's are made from heavy metal alloys (W-Ni-Fe or W-Ni-Fe-Co with 90-95% of tungsten by mass). These alloys have mechanical properties comparable to high strength steels.

"Tungsten carbide" mentioning is a product of ignorant journalism.

Hey the laws in my country a pretty strict and they ban semiautomatic handguns that have a barrel length under 120mm (4.7 inches)

Are there any good data bases on pistols that search by length alone?

Can you recommend any decent semis that meet this requirement in 9mm?

>>32188256
a 220 gr 10 mm bullet has the sectional density of a 278 gr .45 bullet.
velocity does make a considerable difference in penetration.

no comparison.

>>32192197
TM 9-1005-319-10
basically just m16 tech manual should be in there last I checked. Don't have time to dig mine up to look but it explains how to zero it so you can sight it in.

File: pistol-norinco-1911-a1-standard-cierna-kal.45-acp-576.thumb_354x354.jpg (8KB, 354x265px) Image search: [Google]

8KB, 354x265px

>>32188085
Are Norinco 1911s worth it for 400€ including tax and shipping? In the EU.

>>32188085
I have a non-weapons question thats bothering me, boys.

>be me
>have this cute 9/10, shy, and intoverted girl i knew in high school as a friend
>we would talk
>mostly i would
>she would sit and listen intently to my rants or interests
>only ever talked to me or her sister
>her sister was practically the school whore
>but she wasnt. She was perfect
>her name was Rosie.
>she was the cutest thing ever
>but then school ended for me and i never talked to her after that
>occasionally see her though
>and every time, i get depressed
>cuz i reallllyyy liked her
>but i got a gf and eventually got married
>still think bout her often
>now im stuck with this regret
>how do i coup knowing i just let what was obvious slip away
>almost on purpose.
>now i have a child
>think what it wouldve been like to have one with her

Did i fuck up, goys? Or did i do good? Idk. I havnt had my morning coffee and ive worked all week doing gravs so im prwtty bummed out already.

Any pick me up, /k/, that you could offer?

>>32197529
Grass is always greener. Don't be a nig and abandon your family, it's too late now. Dwelling over the past is for losers.

File: Автомат Булкина 1946 года.jpg (59KB, 998x643px)

59KB, 998x643px

what are some of the rarest guns? what makes a gun rare? why hasnt there been any cool weapon developments latley?

>>32197387
they're okay for a beater. if you want a nice 1911 that doesn't break the bank check egun.de, the used market is full of safe queens. EU-wide transfer is a bit of paper work but manageable.

>>32188628
Bullet shape, bullet construction, and then speed is penetration. Speed alone is not enough.

>>32190256
Weaver and s the answer you seek.

>>32195362
Nah you're good

>RIP in peace anon

>>32188085
we have cougars in TN?
i would very much like to nab one.


>im not from here man, i just got stationed here.

>>32194690
yeap, academies in Oklahoma and Tennessee both had .22lr in mounds tho lol like 3$ a box of 50.

>>32188690
glock 43, theres nothing they cant do.

What's the best SAA holster?

>>32190486
I have mine and I love it but I got it for $500. I see them for $800+ now and that's way too much money. The aftermarket sucks, you should get more familiar with the AK aftermarket because it's much bigger.

>>32197793
A rail gun would like to have a word with you.

File: 18_c.jpg (101KB, 712x905px) Image search: [Google]

101KB, 712x905px

I got a stupid question.

What's a .308 Win necked down to a .223 (5.56) called? What's the name of that wildcat cartridge?

Can anyone post the 1911 tier image?

>>32198863
You might be thinking of a .270. Not a .22 cal bullet, but same principle.

Legally speaking, what's the difference between a long barrelled pistol and a short barrelled rifle or shotgun?

And how's the Taurus Judge perfectly legal but sawed-off shotguns not?

File: 1476556791022.jpg (606KB, 456x628px) Image search: [Google]

606KB, 456x628px

hey /k/, looking to get my CHL soon. I don't know a fuckton about guns so I'm wondering what the general consensus is here on what the best defensive carry is

looking for something medium sized.

ty

>>32196977
I have two (.357 and 22lr) and am happy with both. I'm also planning on buying some of their single shots when available.

That being said, I sure wish they'd have side loading gates on the centerfire levers.

Except for the "Henry Original" I don't think none of the centerfires should be front-of-the-tube-loading.

How "cowboy" do you want to be? SASS-type cowboy? You'd be better off getting something that is more authentic looking/functioning.

I bought a Marlin .45-70 a few months back, and the guy gave me Hornady Reloading dies for it too.

Now, I only have about 4 guns, each in a different caliber, but with the price of .45-70, I figure it would be in my interest to begin reloading. I'm going to start out with a single stage just because my volume will be low. Works out because I'm a stickler for precision.

My question being, are reloading dies proprietary to their manufacturer? Or would my Hornady dies work in a Lee press?

File: 20161203_114136.jpg (982KB, 3264x1836px) Image search: [Google]

982KB, 3264x1836px

Found some cases while out fucking around and bunch of the 9mm have what looks like ground off primer strikes. Never seen it before, just curious if anyone else had seen something like this?

Apologize for the phone shot, don't have a camera anymore.

>>32199158
As long as the threads are the same, which almost all of them are, you're good to go dude. I use Hornady, RCBS and Lee dies in my three presses.

File: 1433619852212.jpg (56KB, 720x720px) Image search: [Google]

56KB, 720x720px

>>32199144
I BELIEVE I ASKED A GOD DAMNED QUESTION

>>32199190
>lurk moar

Go to the gun store and ask them questions, that's their job.

>>32199144
>>32199190

What guns have you shot before? Any you, idk, like?

>>32199187
Thank you, much appreciated. I had a feeling that was the case, but I like cars, so I'm used to double checking if something will actually fit up to something else.

>>32199144
Single stack 9mm. Incredibly cheap ammo, decent stopping power, decently concealable.

>>32198863
Pointless?

I think there's a lot of 'em that were done as one-offs. Why, though? I think the 22/243 is more common since the neck is already necked down a good bit. Necking down from 308 is definitely going to require neck turning and/or reaming, and you'll lose a greater number of cases during the forming stages. Still pointless though. 22-250 exists, is common, and can be loaded down to this level or greatly exceed it if you want to burn barrels.

File: 14807913999711683843948.jpg (1MB, 3264x1836px) Image search: [Google]

1MB, 3264x1836px

>>32199014
Or I was thinking maybe he meant like .243 cause .270 is way longer than .308.

Far left is .30-06 I necked down to .270
Next is .270
Next .308
And finally .243.

>>32199043
1. designed to be shot with one hand, vs designed to be shouldered.

2. rifled barrel in the judge and its ilk

>>32198863
https://en.m.wikipedia.org/wiki/.243_Winchester
About as close as I can think.

File: IMG_7315.jpg (228KB, 1537x887px) Image search: [Google]

228KB, 1537x887px

>>32188085
Good solid proven choice. Check out the extreme penetrater loaded by underwood ammo. Shit is cash. Check out a few reviews on youtube

>>32199173
Yep. It usually happens with hot loads, and too generous of clearances in the firing pin. I've seen it on a 460 rowland 1911. In that case, an EGW "oversized" firing pin fixed the problem.

>>32199173
Forgot to add that if these are from your pistol, you may want to check your firing pin fit and look for shavings in the firing pin channel. They get shaved off by the firing pin hole when the barrel tilts down and those shaved bits can lead to a stuck firing pin.

>>32199320
Thanks dude.
I didn't think hot because the cases seem to be pristine once fired factory loads, and the primer isn't flattened out. But I've run into totally inconsistent factory loads in my own guns so it's a possibility.

>>32199358
It doesn't have to be a dangerously ho loadt. Higher pressure but still safe loads will make it more pronounced, like +P, etc. Softer primer cups also add to the problem.

Either way, you need to address the issue, especially if this is a carry gun, either by sticking with ammo that doesn't do this in your gun or looking into firing pin fit, or possibly even unlocking too soon. As I said earlier, those shaved bits of brass can cause a stuck firing pin.

>>32199252
Oh right, .270 is necked-down .30-06
Is the headspace intended to be that different between those two?

File: em1pic2.jpg (95KB, 900x304px) Image search: [Google]

95KB, 900x304px

would it be legal to make/reproduce an old and rare gun in semi auto? some of them are pretty nice

>>32199440
Federal US law says yes.
Must not be readily converted to full auto, and must meet the 16" barrel, 26" oal minimums unless you do a Form 1 for an SBR.

>>32198093

How's life in the 101?

File: french bullpup.jpg (129KB, 1600x565px) Image search: [Google]

129KB, 1600x565px

>>32199458
cool

>>32199472
Good luck, though. You better have a huge amount of disposable income and mad machinist skills. It's not like you're going to be able to buy an EM-1 parts kit to use for a semi-auto build.

First semi-auto pistol. Trying to load the double stack magazine.

I'm a weak pussy, but the force needed to get the next round in is starting to dent the next cartridge and I still have three more rounds to fit in there. What might I be doing wrong?

File: fb_tantal.jpg (153KB, 800x536px) Image search: [Google]

153KB, 800x536px

Is Atlantic's Tantal /k/-approved? How's the build quality? Anyone have some experiences with it to share?
https://www.atlanticfirearms.com/component/virtuemart/shipping-rifles/polish-tantal-ak74-rifle-detail.html?Itemid=0

I could probably spend a little more to get an Arsenal SLR106FR, which would probably serve my needs better. But something about the Tantal appeals to me, and it being $200 cheaper is rather helpful given my poorfag status.

Is 23 1/2 too old for officer school for the us military?

>>32199404
Not my brass or gun, just found the brass lying around in the desert.
Gotcha, I usually shoot pretty standard loadings myself except for 9mm Mak, .300blk or .300winmag.

>>32199420
Dunno, it just came out to be shorter than the .270, could've been trimmed I was just goofing around with range brass.

What is the cheapest and most abundant caliber I can buy for accuracy at up to 500 yards? I wanna figure out what's best for a custom AR15

File: fuckugly.jpg (19KB, 450x179px) Image search: [Google]

19KB, 450x179px

>>32199254
There's a lot of grey area there, though. Where's the line between one of those ridiculous revolvers with a 12 inch barrel, and a sawed-off shotgun with no stock? Neither one is meant to be shouldered.

And if it's the rifled barrel that makes a difference, then what's the legal difference between said long ass pistol and a short-barrelled rifle?

Pic related because I hate those pistols so fucking much, but they do make a good argument

>>32200223
Probably .308

>>32199043
1. Long barreled pistols are 100% legal, no special clause, sbrs/sbss are nfa because liberals/depression era gangsters. Practically the main difference would be one has a stock. The other doesnt.

2. Its got a rifled barrel. Thats it

>>32188256
>If I have a melonited barrel on the way for a build, should I look to get a nitride treated BCG in the future? Right now, I've ordered a PSA premium phosphate/chrome lined one. Do the benefits matter for the BCG or is it just a different way of doing the same thing?
For big game you need as much penetration as possible, forget the .45 go 10mm

>>32188085
enjoy those frame cracks.

>>32200403
So short weapons with no stock but a rifled barrel are fine, but anything with a stock is an SBR, and anything with no rifled barrel is a sawed-off?

>>32193785
its a wrist-mountable gps. why it is there we may never know

>>32193903
i hate these new people too

Does anyone have any experience with chamber lasers? I'd like to get one but keep reading about them being off center, does anyone know of a reliable laser?

>>32200535

do you mean a bore sight laser?

I haven't been on /k/ for awhile and I haven't been watching prices too closely, I bought an m44 Nagant from 1948 for 200 in an auction. It's in great condition but I know they used to be a lot cheaper, did I overpay?

>>32200403
>>32200466
This leads me to a new question: Can you put a foregrip on a long ass "pistol" or rifle with no stock, and still not be a SBR under the NFA?

Live in Tx and Academy has some decent sales right now

Should I get a SD9VE or just get a damn glock 19 and be done with it? The SD9 is around like 250-280$ while the glock is 400.

>>32200616
Sadly, no, depending on your area. Around where I am, that's normal for the M91/30, and the M44 you're lucky to find under $300.

>>32200564
Ya, but specifically the one that resembles a cartridge and you put it into the chamber as opposed to the one you stick on the front of your barrel.

>>32200466
You basically got it.
It also depends on what the "firearm" started life as. If you took a normal mosin reciever and obrez it you just made an sbr because it started as a rifle. If you get a virgin reciever you could just build it into an obrez and have a perfectly legal pistol.


>>32200626
I believe that makes it into a firearm. Its a legal definition under the nfa, sort of covers everything that doesnt fit into a different catagory. Like those serbu shotguns arent technically a shotgun, atf classifies it as a firearm

>>32188085
Hot and heavy 10mm .40, and .357 SIG FMJ/HC would probably be the best rounds for bear/hog defense in conventional autoloaders.

>>32200693
So does that generic "firearm" designation need an NFA tax stamp?

>>32200636
Well, with auction fees and FFL transfer it's more like 250, glad I bought it though. Are ones manufactured during the war worth more?

>>32198668
But I can't get a bolt release for an AK.

>>32200719
I don't know. I've never heard of that.

>>32200714
Iirc yes but its only like $5

>>32200656

I have had two in my life. One was canted to the point that it didn't leave the barrel. The other was perfect till it fell out of my range bag.

I will say that the fist one I mentioned was cheap as shit QC probably wasn't there concern.

>>32198863
22-250.

>>32192823
Why would a lighter than standard .45acp go nearly 200fps slower than a standard 230gr hardball load?

>>32200783
So would you recommend the second one? What was it?

>>32200774
NO, That's an AOW that is a $5 stamp.

A "firearm" that meets no definition of AOW, SBS, SBR, rifle, shotgun, or handgun does not require an NFA tax stamp.

>>32201085
So "pistols" with a foregrip but no stock--including short rifles that never had a stock--are AOWs?

>>32201264
A rifle that doesn't have a stock is classified as a Pistol.

File: 20161201_004816.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>32188085
Why does 124gr 9mm cost $30 less than115gr?(1,000 rds)

>>32190205
Tavor is garbage.

>>32201400
Lower demand?

EAA Witnesses are built on the CZ-75 platform right?

So if I wanted to get a threaded barrel for one, I would get a CZ-75 barrel right?

Thinking about getting an EAA Witness Elite for carry/target shooting.

>>32190205
Go for the TAVOR X95 - they improved the trigger group from the TAVOR SAR and put the magazine release in the same area as on an AR. The only benefit to the first generation TAVOR (TAVOR SAR) is the looks. Some people also like the higher back butt plate on the SAR for shouldering. And some tests show the SAR may be a little more accurate than the X95. But either one you can't go wrong. Just check youtube for TAVOR SAR/X95 comparisons to make a more complete judgement.

>>32199640
Double stacks are just hard to load anon.

>>32201540
Thinking about getting this one in particular.

http://eaacorp.com/index.php/guns/handguns/witness-elite-limited-tanfoglio-81

>>32192562
>Glock
>Hard cast.
Hope you have a lone wolf barrel

File: uplula.jpg (38KB, 880x660px) Image search: [Google]

38KB, 880x660px

>>32199640
dunno

Sounds like this is a job for uplula!

>>32188690
show us the boobies you noobie

Someone said I can only feed my new AR with .30Cal Ball Ammo and it isn't feeding, could it just be that magazines?

I'm looking to build an ar with an ares scr lower as the base, and I'm planning on getting a .300 blk upper. Is there anything special I should know doing this? Like concerning the bcg or anything.

What is a reasonable price for a Pre-1994 ban AR-15?

>>32198123
It's not even bad at this point

>>32203219
depends on:
the gas system
the magazines
the bcg
how new it is
how lubed it is
etc.
>>32203425
depends on the ar

>>32199640
Did they not give you a loader? I know glocks and ppq come with one, it's really easy to use, no need for aftermarket >>32202470
even

>>32198123
>>32203457
I'm about to buy 500 22LR from them at 7c/round. Because free shipping it's better than temporary 6c/r deals I sometimes see on gunbot. FML.

>>32198863
.22 CHeetah.

>>32203717
>>32202470
>>32201598
I loaded and unloaded it as far as I could a few times and that loosened the spring up enough to be able to load it completely. The other magazine it came with wasn't as tough, so it must have just been a little too much of a spring in that one.

>>32201286
So any rifle with no stock can be as short barrelled as you want?

>>32204147
Yes! But only if it has never been a rifle before! Once a rifle, never a pistol again.

If I bought a completed upper online, would I still have to have it transferred to an FFL

>>32204242
No!
Only a lower is considered a firearm in USA.
Please note that this is not the case in other countries, but there you wouldn't be buying an upper online.

>>32204179
And you can have any foregrips or other accessories you want and still call it a pistol as long as there's no stock?

...but if it's a shotgun made with no stock it's still a sawed-off?

What the fuck...

>>32204337
No! You should not add a foregrip!
Shotgun that has been a shotgun and was later sawed-off becomes a short-barreled shotgun. Shotgun that has been produced in that way is AOW (Serbu SUPER-SHORTY)

>>32204540
Likewise, you cannot make a nugget into obrez without it becoming an SBR, but if you were to make one from scratch, you can call it a pistol.

>>32204540
So what is it if you do add a foregrip, but it's never had a stock? An AOW, or an SBR?

I have a 9mm with a threaded barrel, can I put a compensator on for shits/ gigs? Its a cz75

Will an x300 fit into a kydex holster made for a tlr1?

I have a rifle chambered for 7.62x51 CETME. How long do I have before its kill by by regular ammo? Should I ditch it or will it be good for a while?

>>32188085
In Glock 29, Double Tap 230 grain DT Hunter ammo tumbled 1 in 4 rounds. I'd stay closer to 200gr.

>>32205268
that isn't how it works

>>32205993
Why not? like a muzzle brake, should thread right on

>>32188690
Tits or get the fuck out whore

>>32206058
He's just being a cunt. Do it faggot

File: 22016-10-25-16.45.20-660x319.jpg (60KB, 660x319px) Image search: [Google]

60KB, 660x319px

>>32188085
So is there a website like PCPartPicker but for AR's?

Is there some way to figure out what handguns will fit your hand the best without spending all that time finger-fucking them one by one until the clerk gets visibly annoyed?

I molested half a dozen the other day and the only one that really felt even half-decent was the M&P .40.

File: IMG_7674.jpg (57KB, 800x600px) Image search: [Google]

57KB, 800x600px

Anyone know the value of this thing? It's a 50bmg. Made buy SMI I think. It was like 6k In 2008. Company is out of business by 2010.

How often do I need to change my gun carry ammo? Is that a myth? I keep my gun in my room and it gets kind of cold at night also have some extra mags loaded in the night stand

>>32194217
460 rowland is a better choice if you must .45 for bear.

and hippopotamus.

Anyone else think vaginas are disgusting?

>>32206900
You should only really worry about the first round in the magazine. If you clean your gun fairly regularly, make sure not to get into the habit of just chambering that same round over and over again. Ideally you should be going to the range often enough to shoot through your ammo, making this not an issue. But if you have expensive carry ammo seperate from range ammo, I'd at least take the first round from your carry ammo on range days and shoot it off.

Reason being that repeatedly (that's 10, 20, 50 whatmany times) chambering the same round may cause the bullet to set back in the case, which will raise the PSI in the chamber. This is basically the origin story of Glocknades, as police would regularly chamber and unchamber the same round for months and then the gun exploded when actually firing that round.

Otherwise, just make sure your magazine springs are clean. Only really an issue if you are often outdoors in dusty areas. Do NOT "clean" the brass of your rounds with oil. If they are dusty, give them a little dry rub and leave them be.

>>32206618
kinda
https://www.ar15builder.com/

I've been using EWL or full synthetic motor oil for lubing my pistols and rifles with no problems whatsoever. However I dislike how oil tends to weep out of my guns no matter how light of a coating I put on. If I switch to grease only (no oil) will there be any potential problems in my glocks and AR's? Any sort of gumming up the action or problems during the summer/winter?

>>32201540
>>32201755

pls respond.

File: IMG_4025.jpg (2MB, 3264x2448px)

2MB, 3264x2448px

Which is lighter? Assume unloaded with iron sites on both.
Scar in 556 with 20"barrel (not sure what model this would be)
Or m16a4 replica
>pic related

Are muzzle brakes NFA items? AKA, would I need to file a form through the ATF?

Is a custom fire-selector with a bolt-hold-open mag the only way I can get close to installing a bolt-release on my AK?

https://www.youtube.com/watch?v=KrhgqTj7IfY

>>32191119
Just wait. They're working on importing the 806, which is pure improvement

>>32208956
No, unless you're Sig Sauer and you try to get cheeky with suppressor baffles.

>>32209043
Sig Sauer really likes their cheekiness though.

>It's a "wristbrace" for pistols, it just sucks as a brace and happens to look and can be used like a stock

>>32209043
Awesome, thanks

>>32209054
Ssshhhhhhhhhhhh

>>32208956
the XM177 original moderator was an NFA item, iirc it altered the decibel level.

If it is marketed as a muzzle brake and not a sound suppressor it'll be ok. NFA items are pretty tightly monitored by the dealers, so you'll know before you get your hands on it lol. If you are machining one yourself, idk.

>>32209102
The moderators have actual baffles, so they are truly tiny little suppressors.

Ton of Commando clone foreends around that are nothing but big flashhiders. Like this anon said, if its being sold in a shop shelf, it's not NFA.

>>32209054
I just know the atf is going to hand down a judgement on the braces to ban them, and I'll miss it somehow.

>>32209138
I hope to God that if the hearing act goes through we can also get SBRs deregulated from the ATF.

Even if we can't get full-auto just quite yet suppressors and SBRs would be a God send.

Civilian Thompson copy please.

>>32209138
Not for at least two years would they try and pull that shit. People would go nuts with protest, and with Republican everything in the Federal government right now, some change to revert the braces back to legality would go through.

>>32209152
I don't hold out hope the NFA would totally go away, but I can picture the full auto registry possibly reopening. They might slap a little extra bullshit on it because of how demonized full autos are, but I imagine that if it happens it could be somewhere in Trump's second term assuming there are enough Republicans in the congress.

>>32188085
if i like a girl with a penis does that make me gay? shes really nice

>>32200347
Bore diameter greater than .50 and rifling and OAL. Anything smooth bore with a less than 26" OAL is an AOW. Anything with a over .50 caliber with less than 26" is an AOW. Any shotgun that leaves the factory with a stock becomes an SBS when the barrel becomes shorter than 18" regardless of status of the stock.

>>32209054
I'm not a huge fan of modern-day Sig Sauer, but I respect their balls with regards to stretching the NFA.

>>32205100
If the OAL is greater than 26" it's just a "firearm" and needs no stamp, if the OAL is less than 26" it's an AOW. Also if it helps, the magpul angled grip does not count as a grip (there are several atf letters about it) so you can put one on anything.

>>32201085
$5 stamp is just for transfer, to make an AOW is a $200 stamp.

>>32206900
What >>32208191 said, either rotate which bullet gets chambered or just don't fuck with the gun, which you shouldn't.

Also, rule of thumb is essentially every year, sooner if you're paranoid, and half whatever you think you need if you live somewhere humid

File: 356474.png (18KB, 620x593px) Image search: [Google]

18KB, 620x593px

I have a question about silencers.

Let's say I don't want an assfuck huge silencer on the end of my barrel but my state doesn't allow SBR's, can I cut down the barrel and permanently attach / weld the silencer without making it a SBR? Can the end of the silencer then be considered part of the OAL and barrel length?

pic related, it's harder 2 explain.

>>32209373
At that point you might be further ahead to come up with a custom integrated suppressor. That way you retain some of the performance of the full barrel length as well.

In any case, that does sound fine to my non-lawyer ears. I've considered doing the same to save a bit of money on tax stamps, actually.

>>32209373
Many rifles use a suppressor to make up the 16" barrel length, yes.

I'm gonna get shit for this, but goddamn every store I go to doesn't have what I'm looking for. I need an IWB holster for my G19... I want a kydex one that has the belt loops (1.5inch) that's on the sides of the holster...like so it takes up more room on the belt, instead of sticking out so far? (I'm trying my best to explain this but I don't know the term)

Typically I like to try things first before I buy, but I can't seem to find anything like this anywhere nearby. And most holsters are "universal", not sure how well a universal kydex holster will work when they have no give in them like leather does.

>>32209291
No.

>>32209795
http://www.crossbreedholsters.com/Product/SuperTuck-Deluxe

Thoughts on this?
http://www.thecrimsoncaravan.com/store/p46/Basic_Operator_Kit_%28updated%29.html

>tfw its finally my turn to ask this question

I live in Florida. I just got put on Celexa. Am I forced into having someone buy funs for me?

Its just depression w/o suicidal/self-harming thoughts.

I just bought a CVA optima V2 will I regret not shelling out for the accuracy? Also what kind of scope should I put on it?

>>32210372
Trash. And here's why: If you are too poor for plates, there is no shame in that, but don't buy a plate carrier if you can't fill it. And if you can buy a plate carrier, Condor is trash that's going to fall apart.

If you are in poorfag mode and want a "basic operator kit", put armor out of your mind. You want loadbearing and belt equipment.

For $150 you can get:

>USGI FLC vest with pouches, multiple camo types for anywhere from $30-50. Pouches will MOLLE onto your future kits.
OR
>Chicom vest for $10-15.
AND
>ALICE belt for $10
OR
>Duty belt $10
OR
>USMC battle belt MOLLE for $15

You can get a starter pack like a GI 3-day pack, USMC ILBE, or flat color civilian daypack for $50-80.

All of this equipment will be durable and well made, and will last as you upgrade. Unlike the website kit.

If you REEEALLLY want a cheap plate carrier, the Blackhawk Lo Vis is $30. No MOLLE, but you don't want to be hanging weight off the front of any $30 plate carriers anyways.


For your first "operator purchases" you should get a sling, a pocket notebook, good earpro, and decent belt. Spend your money on ammo and git gud.

File: hoppes.jpg (30KB, 640x480px) Image search: [Google]

30KB, 640x480px

>>32188085
Does /k/ have any recommendations for winter operating gloves?

>>32210740
Anything from The North Face has served me well, General.

Is the KAC M5 still the best rifle length drop in? Seems like if I want a quad I have kac or dd to pick from.
I tried asking in arg but got no help as expected.

>>32210368
Shame that only comes in bible.

File: 1455138340267.jpg (28KB, 273x282px)

28KB, 273x282px

Is there anything that isn't banned in Massachusetts? Working on getting my LTC but just from a little research it seems everything is fucked, can't own shit for rifles. Am I missing something or are we literally the worst state in the union for guns?

Are there any other Massbros here? How do you cope?

>>32198720
I'm going to have inform burn watch >>32197793

WILL AN AMD 65 BRAKE GO ON A 16" DSA FAL VOYAGER?

Why do video games always show characters racking the bolt on the gun or using the charging handle even when the gun has a bolt release?

File: 1479082524653.png (43KB, 657x560px) Image search: [Google]

43KB, 657x560px

>>32211359
Mini 14's all day.

>mfw CTcuck

I have ab Anderson stripped ar15 lower, but the roll mark is ugly af. Can I fill it in as long as I leave the serial number?

File: csgo_2016-12-04_19-08-24.png (554KB, 723x509px) Image search: [Google]

554KB, 723x509px

anyone know what gloves these are? only things i've found that are similar are from rothco and such

File: 1307407857736.jpg (172KB, 1024x583px) Image search: [Google]

172KB, 1024x583px

>>32197387
mine works great, just needed some VZ grips

I dented my tokarev magazine when I dropped it, it no longer functions.
How can I fix it? The magazine itself doesn't come apart, just the floorplate, follower, and spring.

File: 400px-Smith&WessonModel29.jpg (21KB, 400x215px) Image search: [Google]

21KB, 400x215px

School me on model 29s.

What are the most desirable trim levels? What's a decent price for one of these? Any years of manufacture I should avoid?

I want my first .44 mag for my collection, and I also want my first smith revolver. So this ticks both boxes.

>>32213531
If you don't have any metalworking experience or tools, take it to someone who does metal fabrication and repairs, hell, maybe even a body shop. See what they can do.

Otherwise, it will depend upon how dented and where the dent is, but basically, you'll probably need to make what amounts to an anvil the same dimensions as the inside of the mag, and then straighten it out with that and a body hammer.

If you're lucky, maybe you can find a bit of metal that's close enough to the inside dimensions to work without having to fabricate an insert.

File: Screenshot_2016-12-04-21-52-48.png (141KB, 720x1280px) Image search: [Google]

141KB, 720x1280px

>>32210346
Yes

File: Screenshot_2016-12-04-22-02-07.png (136KB, 720x1280px) Image search: [Google]

136KB, 720x1280px

>>32210346
>>32214331
Wrong picture

Best options for left handed/ambi handgats besides gen4 Glocks?

File: 1480730148029.jpg (13KB, 284x177px) Image search: [Google]

13KB, 284x177px

Is a $50 fee normal when applying for a cwp? I feel like my cuck country is fucking me.

File: af49516876a4a6f2c2322c6786c1ddcc.jpg (29KB, 450x340px) Image search: [Google]

29KB, 450x340px

Would a Luger-style toggle lock against the back of the cartridge fix the setback problem with bottlenecked cases in revolvers?

>>32188690
Ignore anyone who suggests anything in 9x18. It manages to be shittier than 9mm and the guns it's in are shit.

So I've been getting more and more interested in assembling/building my own rifle, especially the idea of staggering the wallet murder, but I'm trying to find possible builds that aren't just an ar15 or ak. Are there any other rifles that have decently available parts? I haven't done any of this kind of work with guns but I do have some experience working with my hands and have access to basic machine tools. So far I've just found FAL and G3-type rifle kits, both of which I'm interested in but just want to see all my options.

Also I've seen the possibility of making a range toy out of putting an sks receiver and aftermarket parts into an Archangel or Tapco stock, but I always find really mixed opinions on the sks aftermarket stuff.

>>32201798
please, KKM barrel.

File: image.jpg (36KB, 637x420px) Image search: [Google]

36KB, 637x420px

What is the average wait time for PSA to ship items?

>buy upper, optic, and ammo the Wednesday before thanksgiving/black friday
>site claims uppers can take up to 15 days to process
>I'm assuming that's "business days"
>it's been 12 days since order was placed
>still processing
>due to the holiday and black friday insanity buying, I'm probably looking at about a month long wait (?)

I've heard PSA is notoriously slow, but how have your experiences been? I'm just really hoping I don't get fucked over. Reading several reviews, I've seen that many people have thrown up their hands and done the proverbial "fuckit" and got a refund because their items never shipped, yet PSA charged them immediately after placing the order.

what kind of gun is this

https://www.youtube.com/watch?v=_L9-xyZ7TtU

>>32190899
>Troy Troy Troy Troy
Fuck this company

>>32188690

My wife loves her m&p shield and does well with the xd mod 2 sc

>>32188085
is there a difference in recoil with the mossberg 590 series between double wall barreled models and non-double walled models?

File: s-l1600.jpg (83KB, 1200x800px) Image search: [Google]

83KB, 1200x800px

Does this bianchi m12 holster come with the thumb snap? It looks like it but the ones I see have several snaps, this on only comes with 1.

Should this work fine for a cz 75?

Going to get my Tikka T3 in .300 WM probably near the end of next week and for now I'll put my Nikon Buckmaster II on it.

Is this a decent enough scope for the rifle or should I try getting a fancier one eventually? I don't know much about optics.

>>32188085

I've got an ar 15 in a dissipator configuration (rifle length gas on a 16" barrel) and have short stroking issues with lighter loaded ammo. I know that dissipators tend to be under gassed. Would reducing the weight of the buffer help with the short stroking issues?

>>32209373
Yes so long as its welded and creates a solid metal tube at least 16"

>>32209386
nigger do you even know how integral barrels are made or how silencers work in general

they're still only 10" or so of barrel and around 6" of baffles

Military related can I pass basic training with bulging disks in my back or should I wait until it heals in a couple months??

File: 1471379476982.png (492KB, 720x405px) Image search: [Google]

492KB, 720x405px

Poorfag here, just got a 10/22 Carbine as my first rifle. The irons on it are a little shit and I want either new ones or a scope. What is a good sub-200 dollar choice for either? Pic unrelated

>>32188089
Agreed.
Source: me. I am a Wildlife Officer, what Colorado calls game wardens. My duty carry for woods is G20, city carry is P226 TacOps

>>32220567
tech sites.

>>32220635
Thanks. How about glass, or should I just not bother at that price point?

>>32220590
Where at?

File: 20161205_110837.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

I haven't fired my gun in awhile but I inspect it often. What is this blue stuff? I've never seen it before and because I don't know what to call it, Google doesn't help too much.

Hard cast is a meme alloy.

>>32188085

Starting to get concerned here folks and I need some advice. I've had a Lee-Enfield rifle sitting in my FFL since a little after 10 AM EST on saturday, They close in two hours and I've still not heard anything.

I called them at around 12 today asking if it was ready (maybe the FFL who shipped it forgot to include my number?) but the guy on the phone couldn't tell me anything. I left them my name, number, and a description of the firearm and still haven't heard anything since.

Tomorrow will be the third day (second business day) they've gone without logging it in. If I'm not mistaken, § 478.125 Record of receipt and disposition from the ATF says they only have until the end of the next business day (today) to get it logged in.

What should I do? Wait another day or two or head to the FFL and inquire in person? This is the first time they've ever taken more than a couple hours to have a transfer ready for me.

>>32188085
Why does walmart never have any 9mm hollow point? Were else can I find find hp ammo or cheap 9mm ammo in general?

>>32222398
Online. Use ammoseek.com or gunbot.net

How do I stop flinching? Well, it's not so much a flinch as forcibly blinking when a shot goes off in front of my face. I haven't noticed any negative impact on my accuracy and I don't tense up or anything in anticipation of the shot, but when it goes off I can't keep my eyes from blinking. Even happens with .22LR.

What's the name of that kid who would talk about going into the Marines and wrote Semper Fidelis on a k-bar?

new bread?

>>32222802
Jace. It turned out early last year he was actually an ebin master ruseman who trolled /k/ and sjws alike into thinking it was legit.

>>32188085
Would it be possible to create a dedicated page for each state in the union on the /k/ wiki? Our wiki seems woefully neglected altogether

>>32222222

>>32222721
Wear eye protection.

File: Frogs_ee4a45_6105815.jpg (131KB, 880x644px)

131KB, 880x644px

Looking to buy an AK, where the fuck do I start?

where is some public land where I can shoot near LA county? I think I read there's none INSIDE LA county, but maybe a neighboring county? thanks in advance

>>32195771
Damn Right we have them on camera as far south as StClair Co. Alabama

>>32212596
Oakley Factory Pilots

File: 91yvkCYMItL._SY606_.jpg (73KB, 455x606px)

73KB, 455x606px

Does anyone know if CZ-75 16 round or similar size mags will fit in surplus 40mm grenade pouches?

>>32226627

WASR 10. Arsenal if you have a bit more cash.

File: opooper.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

I am a newish shooter who just bought their first gun, so far I've put 200 rounds through it. What can I do to be a good shot with a 9mm handgun especially at far distances? Pic is from today, 15 feet mostly aiming for the center but that last 15 or so I was aiming for the top portion of the target