So /k/ what is the thinnest autoloading .308 and/or 7.62x51 firing gun you know?
Hardmode: If it's an AR, is there a buffer-tubeless upper available for it?
>>32118709
DPMS G2, by over half an inch.
No.
>>32118709
Why thin? Gunna cc in a trench coat?
>>32118720
A half-inch wide AR? No way.
Remington wood master maybe. Pretty basic rifle. 760 or 780
>>32118745
Nah.
20 rd mag, maybe 10 rd if 20 prints too hard.
On it I'd put the shortest barrel I can find (pic related is what I'd go for if x54R was likely to go down in price).
Buffer-tubeless because even more concealability.
Best truck gun.
Even better tackle box gun.
>>32118709
HK91/G3? If you get the K variant its shortish too.
The height and width is identical to the MP5
>>32118745
Although CCing a .308 would be pretty sweet...
>>32118800
Also, this is a thing.
>>32118805
Ohh, ok. Yeah for that only a Kalash would do. If money is no object a stripped down scar can be stockless.
>>32118824
But still.
Technically hypothetically possibly maybe perhaps what if I wanted to actually CC it? AKs are usually pretty wide.
Scars too. Any ideas on what else could be a thin .308?
>>32118754
Nigger you have no reading comprehension.
It is the thinnest, it is a little more than half an inch thinner than the next thinnest. It's right at an inch wide, and you can shave a quarter inch off that if you get rid of the brass deflector.
>>32118896
Shame about the forward assist though.
Sticks out just as much as the brass deflector.
>>32118855
Power to ya if you dress around it.
>>32118980
I wonder if/where they make 2-4in barrels though...
>>32119037
...it's gorgeous
How thick is it though?
>>32119089
Same thickness as an MP5k. The only difference in dimension between an MP5k/MP5/HK33/G3 is length. I think its 1.5".
>>32119121
Well shit thanks. You've gotten me ever so closer to my dream :)
>>32119195
You're probably going to have to build it.
https://www.hkparts.net/shop/pc/HK51K-Barrel-Cold-Hammer-Forged-US-Made-120p2392.htm
Good luck.