electrical tape edition
old >>31839815
Is nickel boron just a meme?
newbie looking for rail reccs under $150 and lightweight stock choices
>>31845170
In for fluffly bottom needs to kill himself at once
It's like he didn't have a dad around to teach him how to not be a fuck up
>>31845178
Yep
R8 plz
>>31845170
You playing musical optics too?
>>31845183
Movie to watch on lonely Saturday night?
>>31845182
ALG emr v2 or v3 can be had pretty cheap and don't require a torque wrench but prepare for hatred if you buy it because some people can't get over their opinion if it's an attractive rail or not, let alone acknowledge the awesome mounting system developed by bill geissele.
>>31845188
6.5/10
>>31845189
p much trying to make my way through the entire trijicon catalog at this point, it would seem
>>31845214
That's the best config it's ever been so far IMO
@31845193
***i will donate $1,000 to the legal defense fund of whoever removes this degenerate from the face of this planet***
>>31845201
Major League.
Anyone else playing titanfall? Pilots are officially >ODSTs in my book
>>31845227
Your rifle would look so much better if you'd gone with an mk4 or mk8
finally got my stamp back feels good waiting for my SBR to clear though,and fuck the new NFA rules.
>>31845193
You used to be cool bruh, you talk too much shit now and your rifle ain't even cool.
Viable alternative to the anon that asked about KAC and other expensive "gucci" rails? Made in USA for $70 and quite tough / functional, at least so far
>UTG Pro
>>31845246
Mlok everywhere.
>>31845246
Honestly I was gonna get a mk8 but they disappeared real quick.
I will end up getting one me thinks. 15" FDE prob.
>>31845214
That is because Trijicon is a best. You should get a RMR for your Glock.
>>31845267
is that the short SOCOM can or the blast mitigator?
>>31845262
You need a gucci lower, a different brake, and a better looking stock more than you need a new rail 2bh
>>31845277
It's just a Warden. I haven't made up my mind yet which can I want to get.
I was looking at the SOCOM mini but other people here seemed to disprove of it.
>>31845267
probably won't. rmr might go on the ta31 eventually
>>31845282
I'm gonna get an 80%arms billet lower to match the Gibbz and honestly I love the look of the brake but I'm gonna wait to see its performance before I make a final call on it
The rail will be next year
>>31845284
>whaaa, someone pointed out how shitty I am so my continued shitty behavior is acceptable!!1!
Again, $1,000.
>>31845289
I've got a crux ark 556 can and I'll be real honest 556 is a shitty cartridge to suppress it's still better to have one than not have one.
Bought this today. Can't do any serious work to it until summer. Do I need a special lower gas block front sight or is it level enough to throw a normal front sight on it?
>>31845302
i remember when you were good
>>31845310
It will need to be the same height if you plan to buy normal sights
Did you check like I said or nah?
>>31845311
I told you what you need to do to stop getting hate you faggot but you didn't listen
You reap what you sow
>>31845334
daily reminder this man owned and defended that rifle
>>31845334
I don't have a ruler in the house and my dad isn't home to go use his. Hoping someone here has dealt with this.
>>31845335
I think the stock throws off the aesthetic
•So I'm gonna see when the plant manager teaches his course at the local CC and go from there•
>>31845340
Yet in 6months I've done something much better
You're still holding onto a meme lower, ptac barrel, dickmod rail piece of shit that you can't even shoot because guess what, you're a jobless faggot
>>31845349
Reeee improvise anon! If they are the same height then you can just get metal sights that are standard height
You're not underage are you
>>31845170
Best adjustable gas block?
>>31845293
Part of me wants an RMR on my 19, but at the same time it's not worth it for my main defensive handgun. I need to decide on night sights soon for it though.
I might eventually have my Legion's slide milled for an RMR just for shits and giggles.
>>31845384
Don't you dare
>>31845384
ive just never thought
>you know what this handgun could use? a red dot.
>>31845374
>I've done something much better
>meme lower, ptac barrel, dickmod rail piece of shit
>>31845384
So get a T1 installed
>>31845374
It will fill out when I get a vfg and put my light on it.
Good.
>>31845396
I thought it would be fun on the P226 Legion because it's pretty damn soft shooting and has such a nice trigger.
I'd do that after I got a 9mm can though.
>>31845399
This makes me want a LARUE quad rail
@31845401
You are the human form of a cancerous tumor.
>>31845410
Eh, I'd still change the stock but you do you, it's your """""""rifle"""""""
>>31845415
Pls no
>>31845421
>>31845374
Not underage, just not very gun savvy outside of pistols.
>>31845421
>LARUE quad rail
it's a good rail
>>31845421
There are days when I miss my larue quad rails
>>31845374
Damn I'm dumb. Grabbed a piece of paper and lined it up. Even as shit! Thanks for forcing some enlightenment into my thick skull
>>31845443
>>31845452
It's aesthetic and even though it has that ring around it (so 2006) I like it a lot.
>>31845466
Good. Now if you're certain they are the same height, get some metal sights. Plastic ones will melt.
Or get an a2 fsb and a polymer rear. It's probably cheaper and less fugly
Haven't looked in months. Have AR parts and ammo got expensive for the election? If Trump wins will everything get cheaper than ever before?
>>31845478
I heard you're going to finish your lower soon
>>31845545
Yep. Buddy got an 80%arms easy jig I'm gonna "rent" from him
So guys I'm new to AR.
I have AKs and handguns but no AR yet.
If I wanted to make a 2sneeky setup with a short barrel, short stock, suppressor, rails all the good stuff. How much would I be expected to spend in total? Building my own of course. Because all of the prebuilts havnt been what I'm looking for at all.
>>31845562
That looks fancy. I was expecting a regular jig for a drill press.
guess what it is
>>31845590
Ur penis through a microscope
>>31845590
babby's first welfare check
>>31845170
Still not done, as usual :^)
Heading to a party.... Got my lower taday. Got my 10.5 BA taday. Have KAK Blade. Have premium bcg. Steal your credit card LPK on Monday. Need SLR sentry 7, 9"ish rail, muzzle device. Taking sugg. on last two
>>31845590
puppy
>>31845626
Just shoot it like that,
It'll be fine.
>>31845581
Iirc the one he got was all steel too. We are planning to use a router
>>31845646
o yis just ned duktape :DDDDD
>>31845647
That's a good deal, sounds like a good friend
>>31845626
receiver mixing is worse than race mixing
>>31845669
Yeah he's okay. A bit normie though
>>31845677
But what about a billet upper and forged lower? *<*
RMR RM01 or Leupold DeltaPoint? I wasn't a fan of the RMRs when I was looking through them at the LGS...I did like the SIG Optics Romeo series that they said were very similar to the Deltapoints.
>>31845701
That's what I have, and he's absolute autismo about it. lol
>>31845677
That may be true, but at least I didn't throw a thousand dollar optic onto a cheap lower :^)
>>31845711
Autism is an /arg/ trait but he is right it's nasty
>>31845677
>t.niggerlover
>>31845718
aero lower is goat. having a billet upper, especially a rollmarked one one on a forged lower is pure cancer
>>31845207
The only things the EMRs have going for them is a robust barrel nut and the G name.
They're ugly, too fat to be a skinny rail while too thin to fit over a suppressor, have dumb mlok placement, heavy, and about $40 overpriced for what they are unless you got one of the dozen blems they sell once a year.
t. EMR owner
>>31845738
I won't care, as long as the thing hits sub 1 MOA and can make the local soccer moms complain.
I'm golden.
>>31845750
When you provide any functional proof of problems associated with mismatched uppers, I'll gladly switch for you, faggot.
>>31845742
>2016
>not being a jigaboo enthusiast
kys shitlord
>>31845778
ITS CANCER ANON
JUS ACCEPT IT
>>31845761
They are not heavy nor overpriced
The rest is subjective and not something I will agree with.
The barrel nut is awesome.
>>31845762
Kek
Cubbies score first
>>31845792
lol u trips are so funny
>>31845750
>A is goat
KEK
>>31845781
enjoy your enrichment
>>31845804
OW wold cup > world series
>>31845792
>no 6 o'clock mlok slots
>dumb placement is subjective opinion
>1.8" OD, 1.33" ID
>too fat to be skinny is subjective opinion when its 20% fatter than most skinny rails
You're not helping the whole "gc is retarded" thing
>>31845823
t. multiple anderson lower owner
>>31845804
tfw won't both teams to lose
Let's say I wanna install a FSB without any milling equipment. Am I fucked? Are there other less conventional options than using taper pins?
>>31845836
I'm playing ranked, I'll deal with you in a minute
>>31845844
Setscrews
>>31845841
i blame my mom
>>31845842
want*
>>31845851
I thought about that, but where do I put them on a regular FSB? side? bottom?
>>31845258
>>UTG Pro
Is there any front-to-back wobble? I remember picking up a Midwest Industries drop in quad rail and there was so much wobble that I had to return it.
>>31845452
Is that handguard a Larue, and did it have any front-to-back wobble?
>>31845850
Not him >>31845836
EMR is retarded. It's overpriced garbage, literally. It's better suited as a baseball bat
>>31845870
Buy a setscrew model. They have them in the bottom, and extra material there behind the bayonet lug to support them.
>>31845862
ill replace the lower when aero does a run of ap15's. until then there isnt any other lower worth getting imo, spare KAC
>>31845829
>vidya gams
I'm not 12
>>31845901
I don't play them just watch them, fake giddy
Spikes
>>31845888
Or if you already have a pin on fsb, turn it into a clamp on using the pin holes and some small machine bolts. Would require enlarging the pin holes, but that can be done with a hand drill.
>>31845915
>moldy labia
>>31845262
Please mind my ignorance, but what kind of upper is that?
>>31845935
Wut
Hey Giddy if you're in here can you do a rig rundown on your AR build?
how long did you run irons before stepping up to glass?
>>31845891
>run of AP15s
I wish
>>31845947
Your Spartan rollmark is literally meme-tier
>>31845891
Gen2s are a 4-6 weeks out I believe.
>>31845976
Should I kys?
>>31846005
Nah, kill Psi, he's an immense danger ninja level faggot.
He doesn't even shoot his AR
>>31845960
maybe if we spam them enough they'll make some
>>31845994
i already have two aero gen2's
>>31846024
Maybe if we did a group order
What's an /arg/ approved light besides the surefire scout and mini scout? I can't afford that
>>31846035
Arisaka body and malkoff head
>>31845953
This please. Saw your build on r/ar15
>>31845871
>Is there any front-to-back wobble? I remember picking up a Midwest Industries drop in quad rail and there was so much wobble that I had to return it.
You gotta somehow manage to get it to fit right, then it's fine with enough patience...
>>31845384
Need more pics of your m4 clone to jack off to
>>31846043
How does this work? Is it pretty much a surefire but cheaper? Any issues I should know about before ordering?
>>31846100
malkoff heads are good, you'll still need a tailcap but it works with sf caps so you can use a sf pressure switch
>>31846100
no issues
>>31846100
It's a clone of great quality. A lot of people use malkoff heads in older sf lights
>>31846100
fyi you're not going to save any $ this way. just a better light.
>>31846068
>somehow manage to get it to fit right
>with enough patience...
How bad is it? I'm a little confused how it can get a snug fit when it fits OVER the front ring.
http://www.primaryarms.com/noveske-m-p-tti-base-pad-black-nv06000004
Talk me out of this and getting a CORE
>>31846164
stay away from CORE
Giddy is sending his r/guns drones here.
What a shit thread.
>>31846164
>>31846172
this. I've visited their shop. not impressive.
shit's fucked up man.
>>31846180
Is he banned again?
>>31846199
no, he just hates us
>>31845958
A few months for me. I got a red dot for my first AR after owning it for around 3 months. I put the PA1-6X on my current 16" shortly after getting it. Tomorrow, I'll put an Aimpoint PRO on my pistol
New2guns here. I've got a new M-15, and I've got a couple questions. First, the thing seems to be sending the casings really far, about 5-7' at about a 135 degree angle. The second is the trigger seems to be very heavy. I've only but about 20 rounds through this thing (got to the range somewhat late) so is that something that'll wear in, or is it something I should be concerned about?
>>31846172
>>31846188
You guys talking about the M&P CORE or the CORE15? Because I'm talking about the M&P .
>>31846262
I was referring to core15, made in the fine city of fucking ocala florida, buy some guys who make airboats.
>>31846262
CORE15
>>31845170
Anyone buy an uppers from masdefence or midstate firearms?looking for a complete upper(bcg/ch included) for around 400 and they seem to be the better options.
just ordered a green blob amazon special bipod.
very curious to see if this thing is a piece or not.
>>31846255
Sounds fine to me. Mil spec triggers are notorious for sucking. The larue MBT is the best upgrade for the money.
Also, post pics
>>31846164
>>31846262
get the CORE it is great
>>31846302
PA has a Geissele sale on now, 25% off
getting there
>>31845953
>>31846046
surefire socom 556rc
surefire 1/2x28 brake/suppressor mount
Daniel Defense 10.3" barrel 5.56
surefire m300v weapon light
larue lt752 m600 offset mount
surefire scout dual switch
slr sentry 7 gen4 set screw adjustable gas block
magpul mbus pro front sight
MAGPUL afg
Daniel Defense MK18 RIS ii
Innovative Arms W.A.R. upper(w/gas tube)
Cryptic Carriers bolt
Noveske NP3 bolt carrier
Aimpoint t2 w/larue lt660
KAC stolen valor rear buis
BCM ambi charging handle
magpul gen3 magazine
KAC sr-15 lower minus trigger, selector, and grip
Magpul BAD lever
Geissele s3g trigger
VSeven 3gun ambi selector
BCM mod 3 pistol grip
B5 SOPMOD enhanced stock
>>31846180
kys
>>31846321
>buying a drill/impact driver from anyone but DeWalt/Milwawkee
>>31846321
Stop reminding me of work.
>>31846272
>>31846278
>>31846307
Yeah, that's a no brainer. I've been thinking of picking up an M&P CORE and turning it into HSLD operating machine.
>>31846312
It'd still be more expensive, wouldn't it?
>>31846234
Why does Giddy hate /arg/ now?
>>31846352
Get the fuck out
Kill yourself
>>31846352
Makita a best
>>31846327
Hey! Could you give me a parts list of the bright green gun you had up on reddit? Looks like it might be that one.
>>31846358
>more expensive
if you don't care about circle clips, g2s is $126 shipped.
>>31846361
Do you even have tools
>>31846372
Meh
cool stickers
>>31846352
Like there is any reason to pay for DeWalt over Black and Decker
>>31846302
Thanks, and the angle is fine? I was just flinging brass everywhere.
>>31846389
>>31846255
>>31846416
>135 degree angle
plz clarify. 4:00?
>>31846399
Yeah ones shit and the other ones not
>who here /knipexmasterrace/
>>31846454
Kill yourself faggot
>>31846454
Haha what a fucker. Wiha and Wera. The only thing Knipex is worth is a few fucking $50 pliers
>>31846387
Yeah, that's actually pretty comparable. I do need a better trigger for my pistol. I'm spoiled by my SSA-E in my rifle
>>31846454
you can go as Clamps from futrama for haloween
>>31845637
That pic threw me off, then I realized it's not assembled.
>>31846462
>he doesn't spend 75 dollars on 2 pliers
Kek
Also have a set of wera torx screw drivers in the mail
>>31846461
Go suck lizards cock
>>31846481
Kek
>>31846462
>Wera
their ratchets are so nice. really want a 1/2 and 3/4 set.
>>31846436
Yeah, about 4-5 o'clock, according to my friend who was there.
>>31846528
yep that's fine. no problems.
>>31846462
>>31846500
>>31846525
Surprised to see /arg/ has good taste in something
>>31846541
Really? I figured it'd be more like 3 o'clock. Thanks.
>>31846572
anywhere from 3 to 5 is fine if the gun runs reliably and locks back on last round with your lowest power ammo.
arfcom has a little chart floating around that's kinda useful, but those faggots get cold sweats if it ejects at 4:45.
What's the minimum amount of money you need to spend to build a battle-ready AR-15?
>>31846657
inb4 M&P / Ruger tier is considered "battle ready"
>>31846671
Does this include PSA / Aero?
I think it should teebeeaich
>>31846657
$400
>>31846657
colt 6920 for 8-900.
could build a little cheaper.
This DSG buffer spring I have is absolute shit. It' makes a god awful sound and doesn't feel as smooth as my PSA buffer spring in another rifle. Will this get better with use or should I cop another spring?
>>31846697
Then you're stuck with the shit-tier 16" carbine gas combo
>>31846352
that's my old work drill, now the home drill.
i abuse my tools 1000x more than my guns, and let me tell you, nothing beats makita for electric tool.
also, kys.
>>31846354
i wanted to be done by tomorrow but having to remove the tile i installed and ripping out the sheetrock around the tub is setting me back 2 days.
>>31846359
why not
>>31846384
FTW HAD suppressor wrap
surefire socom 556rc
surefire 1/2x28 brake/suppressor mount
noveske lo-pro 14.5" mid-length barrel
surefire m600p fury weapon light
larue lt752 m600 offset mount
surefire scout dual switch
slr sentry 7 gen4 set screw adjustable gas block
magpul mbus pro front sight
BCM GUNFIGHTER Vertical Grip SHORT
Daniel Defense lite rail lll
Innovative Arms W.A.R. upper(w/gas tube)
LMT L7Q3B
Cryptic Coatings mystic black bcg minus bolt
ACOG TA31 ECOS w/rm01 rmr
Magpul mbus pro rear sight
BCM ambi charging handle
magpul gen3 magazine
Del-Ton stripped lower receiver
unknown name lpk minus lots of parts
Magpul BAD lever
Geissele s3g trigger
VSeven 3gun ambi selector
Magpul trigger guard
BCM mod 3 pistol grip
Noveske qd endplate
Carbine buffer tube with castle nut
H3 buffer
carbine spring
B5 SOPMOD enhanced stock
>>31846735
>shit-tier 16" carbine gas
colt doesn't overgas the fuck out of their barrels, so it's not too bad.
they do have a mid out now. but the 6920 is an easy pick for a low-effort first ar.
i just don't trust a complete psa to run right out of the box, especially for someone's first ar.
>>31846742
Under-the-table thanks brah. Big fan of your shit.
I want one of these in 9mm with whatever the minimum barrel length is for that grip.
Is ACOG really worth the money? One day I won't have to ask that question.
>>31846894
that is quite possibly the stupidest thing i've seen all week
>>31846894
The age of cyber punk is here
Putting together my first AR-15. Are these Del-Ton uppers any good? I am strongly considering the AR-15 16" Pre Ban A2 barrel assembly. I like the built in carry handle.
I am hesitant because of the 1:9 twist. Does that make that big of a difference?
Also, should I not buy from Palmetto State? I am worried about my credit card info, and it seems everything is out of stock anyway
>>31846936
Also, should I get a carbine gas system on my first, or should I go mid? Just looking for whatever is easiest to work on and most reliable?
The Del-Ton above is mid
https://sonsoflibertygunworks.com/products/bcg-and-16-mid-gas-combat-barrel-sale?variant=28035150081
this is a good deal for a bcg and barrel
1/3 the time I open 4chin I get redirected to some stupid fucking advertisement
When do we abandon this ship
>>31846905
But Liz still posts here. Also, minus the spacers on the stock, it looks like to be compact-ish
>>31846959
we don't, we get a new owner.
milo or shkreli are the only ones joking about buying the site right now.
>>31846894
i need this
>>31846905
what, did you appeal?
besides Krieger.
who else makes good 24 inch 1:12 twist heavy barrels for .308win AR10s?
>>31846971
no matter how you look at it, it's bulkier than a regular stock.
>>31846971
;_;
>>31846972
How much is this site worth
Can we just atom bomb the current one
>>31846959
That's what I'm wondering. It's also made posting from mobile a pain.
>>31847001
1- no idea
2-won't solve the issue
>>31847004
The ads have ruined this site
>>31847018
What would the cost be to make a copy of this with mods that actually work instead of jerking it to cheeto porn and doesn't have all the ads?
>>31846947
mid
>>31846985
It is, but it looks cool and that's 90% of AR ownership.
>>31847025
Use an ad blocker, I haven't seen an ad online in years
>>31847018
what did you end up selling your KAC trigger for
>>31847054
this desu.
quit selling your eyeballs to the electric jew
>>31846291
Help
>>31846161
My friend has the mid length version and it's just as solid as a RAS.
Survey time
>how many ARs do you have
>how many do you want
>>31847211
own: 2
want: 100,000
>>31847211
>how many ARs do you have
1
>how many do you want
none
Post AR-10s
>>31847211
1⅝
Want, I don't know, 4-5 in various configurations.
>>31847211
>2
>maybe 1 more but there are other things I want first
>>31847211
2 and I am gonna sell one and get another
just bought baby's first lower since it was available at my LGS at a reasonable price
did I fuck up?
>>31847345
You made a very good choice. What are you building.
>>31847351
just doing a plain-jane 5.56 coyote gun, trying to build it as the /k/ube intended
Someone tell me which foregrip arrangement is best on M-Lok. Pic unrelated.
>>31847372
???
>>31847345
Depends on your definitiom of reasonable price.paid 60 bucks for mine
>>31847378
no grip or AFG
Ballistol or Break-Free?
What quad rail should I put on my M&P 15 sport 2 ?
>>31847387
CLP
L
P
>>31847378
>>31847393
RAS, MI drop-in, UTG Pro
>>31847401
How's the job search going?
>>31847211
>how many ARs do you have
3
>how many do you want
5
Getting the parts for a MK18 inspired SBR. Already sent in the NFA paperwork for the lower.
And probably will do a 9mm one next.
>>31847415
going in somewhere tomorrow
Range day funs
>>31847380
trying to build something that facilitates long-range accuracy. i'm a newfriend to /arg/ despite growing up in a gun/hunting friendly family so I'm trying to educate myself before dropping $700 on parts
>>31847381
i paid a bit more than that, but given how close election is I was expecting slightly higher prices
>>31847428
Mgs carbine?
>>31847458
Yes, but not quite
>>31847381
I paid 49 for mine, but I have some bro dealer.
>>31847432
Go to Coworx in Nashua or Manchester. They will get you a job in less than a week.
>>31847432
>>31847502
https://www.coworxstaffing.com/contact-coworx-staffing-best-talent-in-ma-nj-ga-us/locations/new-hampshire/
>>31847502
>>31847507
ill check it out thanks
>>31847437
you should get a thread protector or something. unless your using a thread on can
>>31847211
>1
>1?
might do a pistol build maybe perhaps
>>31847518
What do you suggest? I was just gonna slap a regular A2, don't want to give it anymore length
>>31847211
>12
>1 for sure
>>31847570
if youre going to get some kind of muzzle device then fine. an a2 has tremendous value per dollar, good choice.
i thought you were going to leave it bare or something. one ding and the threads could get fucked up, be careful with it
Looking to do a frugal build. How cheap you boys think can I go and still build something that isn't complete shit?
Any companies other than psa I should look into?
>>31847511
If you sign up with them they will ask you what your "desired wage" is and how far you are willing to travel, tell them $25 or some other high number, and less than 10 miles.
If you tell them your desired wage is 7.50 and distance is 40 miles, and they offer you a job for that wage and that far away, and you decline, they will prevent you from receiving unemployment benefits.
As a temp worker you will have none of the rights, benefits, and protections that a full time employee has, they can fire you at will for any reason. The bright side is that they will find you a job fast and the pay isn't bad.
>>31847622
interesting
>>31847614
600 is pretty good
>>31847570
I couldn't figure out what MD I want (plus my state was discussing legalizing suppressors) so I put this on until I figured it out.
>Suppressors were legalized but no one in my area can sell them
>Closest place is on the other side of the state
I still have the thread protector...
>>31847647
Yeah staffing agencies are fucking scum used by large corporations to avoid regulations and taxes. But they always have decent paying jobs available and 90% of the big name employers hire people for entry level manufacturing positions exclusively through staffing agencies.
>>31847647
Good luck Fluff. Job hunting can be lame, but being broke is lamer
who wants it
>>31847647
Try to turn off your autism and shitty behavior when you interview.
Then kys
All memes aside hopefully you can get a job you worthless unemployed sack of shit because being jobless blows
>>31847762
How much for rail and CH
Why you sellin
>>31847766
kys
>>31847738
>>31847709
thanks
>>31847762
y u sell??
i'm going to go neg rep you on the website its for sale on :^)
>>31847781
>How much for rail and CH
no
>>31847798
>i'm going to go neg rep you on the website its for sale on :^)
reeeeeeeeeeeee
i want a mk12
>>31847798
ya know what would look great on that
>>31847798
where'd you get that cover? is it actually functional?
>>31847762
300 and a non working lawnmower
>>31847869
>is it actually functional?
ya know thats a warden right
>>31847895
fix the mower and ya got a deal
>>31847843
fuck, i know. i just cant be spending any more cash on guns because ill be leaving soon.
>>31847869
burn proof gear. haven't even shot with it yet but its suppose to be rated for full auto i think.
>>31845302
>Futaba
shit taste
>>31847899
I know. i still think its cute and I want one.
>>31847909
im selling mine ;^
>>31847917
oh ok. get one then they look cool
>>31847914
Airtronics poorfaggot detected
>>31847798
lmao did you spray water on your gun to take a picture?
>>31847899
>fix the mower and ya got a deal
If I fix the mower than you gotta give me 1000 plus the upper
>>31847937
lol i'm on team spektrum, stay mad with your POS
>>31847938
it never rains in wa
>>31847942
is it a riding mower at least?
>>31847945
>Futaba
>pos
>spectrum
>good
AYYYYYYYYYY LMAAAAOOOOOO
Eat shit m8, 18mz masterrace
>>31847938
No, I live in Washington and it does this thing where water falls from the sky.
It's called rain.
>>31847952
I was making an Armslist joke you dumb twat. I can't feel sympathy for you anymore for what qb did to your legs.
You deserve all the bullying you get.
>>31847973
>>31847984
>>31847984
You're dumber than Fluffy
>>31847998
>>31847998
pup
>>31848004
>he thinks i was srs
kek
everyone doge post now
>>31847960
>>31847952
lol then why is the table only wet around the gun?
>>31848026
;-;
>>31847954
>>31848042
This anon know what's up
Though my 14sg is pretty good
Miss my 14mz ;_;
I asked this in the QTDDTOT thread, but I haven't gotten any replies. It pertains to my AR as well and these threads are pretty quick so I'll repost it here:
Normally I use CLP and a little bottle of regular Hoppes lube for my guns, but I found this spray bottle of silicone lube. Can I use this in place of regular lube for my guns? Are there any drawbacks? I'm sure it's not dangerous or anything, but is it longer lasting or anything? Mine says it leaves a dry film, which I assume is a good thing, as it will still lubricate even when the spray dries up. Am I wrong or do you guys use this stuff? It's a lot easier to just hose down what I want to lube up than work at it with a rag and liquid lube.
>>31847909
>>31848029
really makes you hmmmmm
>>31848056
Hoppes 9 and clp is fine, no reason to change.
>>31848089
oink oink divorce time
>>31847077
$300 for the new version
>>31847211
0
all of them
>>31848089
Just wondering if it was any better I guess. I have a whole bottle of it so I figured I might as well use it.
http://dailycaller.com/2016/10/25/top-us-general-pleads-with-troops-not-to-revolt-over-2016/
>>31847497
my first was 40.gunshow was handing out 20 dollar off coupons at one point big mistake.The second was having all the vendors accept them when presented.I went with some no gun friends and they didnt buy shit so they gave me their coupons.that was the start of my first build.
Variable zoom (3-9, 4-12, etc etc)
~$300 w/o mount
Reccomendations? Qb hates the strike eagle, what's wrong with it?
>>31848284
2.5-10x
>>31848284
qb hates vortex. Strike eagle is fine.
>>31848289
What optic
>>31848294
Is 6x really enough for 400yrds
>>31848026
>>31848032
Post pic like this
What are some reputable companies that make complete uppers with bolt carrier groups and charging handles for around 400 dollars?
>>31848311
Are you good enough for 400 yards?
>>31848325
Nice target
>>31848355
I can do 400 with a nagant no prob
>>31848311
>>31848373
6x is fine at 400 yards.
How long of a free floating rail would u guys recommend for a 16"?
>>31848398
12/13/15
>>31848398
13-15"
>>31848396
Alright, thanks
>>31845637
>steal your credit card LPK
Fucking died
>>31847211
I have an SKS
I want an SKS for every country that builds them
I'm just here because these is no SKS thread and this is the closest thing to a real SKS thread
>>31848464
It's okay anon, you can watch
>>31848472
Thanks Liz.
>>31848464
>I want an SKS for every country that builds them
how many is that
You guys made me do a bad thing today.
i assume that these cheap security camera's are basically gen 1 night vision.
first light is the white light and then the ir.
>>31848538
did you fuck your sister?
>>31848549
They basically are. I use Stealth Cams which are about the same thing and set them up like claymore mines when varmint hunting, because the the critters move in the cameras fire and let me know where they are.
>implying fucking your sister is bad
It's not if she's hot.
>>31848499
Nine.
>>31848565
neat. i wish i got one when they were cheap
>>31848564
makes me want to get that cheap nvg that inrange demoed recently
>>31848577
Nothing compares to it when varmint hunting.
I bought a cheapo monocle too which is just fun to sit outside and watch the cameras fire when deer or stuff walks through.
>>31848398
15" will go to the end and give you a longer sight radius. 12" is all you really need to be practical, though, and is lighter.
>>31848624
FUG I got a 12" rail. I will never have masterrace sight radius
>>31848763
new thread
>>31847762
I'll give ya $2000 in used scuba gear
>>31846358
I know its retarded to ask but what does the Meme and P do that Glock doesn't besides malfunction after water submersion.