Greetings /k/, Is it possible to replicate this firearm IRL,

>>30300875
Yes, very easily. All you need is wood furniture for your AR. It's readily available, though rather expensive.

File: 1466049459476.png (192KB, 355x408px) Image search: [Google]

192KB, 355x408px

>>30300875
go away ATF

>>30300885
can you recommend any good sites for reasonably priced ARs/wood furniture?

>>30300886
neck yourself nigger, I want one of these whilst I still can

File: 9237P1010031a.jpg (36KB, 600x413px) Image search: [Google]

36KB, 600x413px

>>30300875
A few of the parts to be TOTALLY authentic are rarer. SP1 slabside upper receiver, for instance. However, getting very close is extremely easy. Buy a 20" AR-15 with 2 piece forearms and google "ar-15 walnut stocks". An A1 or A2 upper will also get you close.

File: 1463870673170.jpg (95KB, 684x384px) Image search: [Google]

95KB, 684x384px

>>30300929
>can you recommend any good sites for reasonably priced ARs/wood furniture?
No. Expect to spend $300 for walnut, or $140 for Boyd's laminate (pic related).

>>30300941
>>30300953
Excellent, thank you

File: 1464986518576.jpg (4MB, 4320x2432px) Image search: [Google]

4MB, 4320x2432px

>>30300965
Well, if you're game for laminate, here's more.

File: 1463867438106.jpg (152KB, 736x541px) Image search: [Google]

152KB, 736x541px

>>30300990
That should give you a good idea about looks.

>>30300998
Also, note: this picture is a 5.56 flattop receiver with carbine length handguards and a carry handle bolted on, and a 20 round mag. This >>30300990 is a .308 with rifle length handguards.

>>30300990
>>30300998
doesn't look too shabby, any recommended AR makers to look for or should I mosey over to the AR general for that?

>>30300875
http://www.brownells.com/rifle-parts/stock-parts/furniture-sets/ar-15-m16-wood-rifle-furniture-sets-prod38906.aspx

>>30301030
ARG. There's a run on PSA at the moment; The Happening is starting again.

>>30300875
How many children do you feel you need to kill with that thing?

>>30300990
>assault weapon complete with assault knife
>nice friendly hunting rifle

>>30301044
pardon my lack of knowledge, but what is ARG and PSA?

>>30301051
none, it's a bethesda game

File: rowoCiF.jpg (102KB, 500x628px) Image search: [Google]

102KB, 500x628px

>>30301051
Welcome to /k/. See pic.

>>30301080
AR General (a thread that's always going here) and PalmettoStateArmory.com

>>30301219
arigato

>>30300875
Get an AR, give it some wood, and find some upper that can feed it one of the many unobtanium rifle cartridges that can chamber it

Anyone in this thread have any experience with Fulton ARs? I've got my eye on their M16A1 repro, but I'm not sure if the price is right ($1200). If the quality is there, I'll probably get one, but I haven't been able to find many reviews

>>30300941

If you really want to go "authentic," you would also need a side charging upper reciever with the integrated carrying handle, since that's how it's animated in-game. Both in combination doesn't exist.

And good thing too. Wood furniture might have its fans and haters alike, but that kind of upper would make a lot of heads turn and cringe.

File: Survivalist's_rifle.png (1MB, 2950x750px) Image search: [Google]

1MB, 2950x750px

I'm about 70% through building a copy of the service rifle.

The rifle design itself is non-existent, the creators either didn't know what a real AR/M16 looks like or had to change things around due to copyright issues. The closest you can possibly get to the design in game is a A1 style lower, and an A2 upper, neither of which can be found for cheap if you want an accurate reproduction.

Also there's the issue of what to chamber it in. The Service Rifle is standard 5.56, however the Survivalists Rifle is in "12.7mm".

The only "12.7mm" rounds I know of are the russian "12.7×108mm" round and the "12.7×99mm NATO" round which is more commonly known as .50 BMG. While .50 BMG AR's do exist, that clearly is not what the rifle is.
https://www.youtube.com/watch?v=77HMIQZAwB0
So if you want to make a copy of the Survivalist's Rifle, I would assume an AR-10, or possibly a Beowulf or .300 blackout build would be a bit more appropriate. Also
>charging handle under the dust cover

>>30301615
>The only "12.7mm" rounds I know of are the russian "12.7×108mm" round and the "12.7×99mm NATO" round which is more commonly known as .50 BMG.
.50 Beowulf. It's a hell of a drug.

>>30301657
How's the recoil? Is it big for me?

>>30301440
>http://www.nodakspud.com/
the original M-16 reproduction guys, they make most of the parts used in other companies retro builds. There's a high demand and their barely above a garage workshop tier company so there's a waiting list. And they also produce in batches, so you'll have to wait until the next one is done.
>http://shop.ar15sport.ihoststores.com/category_v3.aspx?categoryID=76
everything other than the receiver.
>http://ironwooddesigns.com/IWDHome.html
Stock, grip, handguards

File: acceptance.png (537KB, 692x577px) Image search: [Google]

537KB, 692x577px

>>30301694
>Everything on backorder

File: JE Sawyer what.png (17KB, 611x243px) Image search: [Google]

17KB, 611x243px

>>30301615
Joshua Sawyer talked about the Service rifle being incorrect before IIRC, in one of these two videos I think.

https://www.youtube.com/watch?v=vxaGXxWdDs8
https://www.youtube.com/watch?v=YFvvr8_CtaI

>>30301219
palmetto State ar's any good? still live in commie state as soon as I move (hopefully soon) looking to buy first AR probably a Colt

File: All-American.png (955KB, 2400x950px) Image search: [Google]

955KB, 2400x950px

>>30301920
Ah, it's the "the importance of real-world knowledge for game design" video that talks about guns being "wrong" in NV.

hey you anons with the wood furniture. Do they come with metal heat shields or do the laminate or wood itself not "singe" when you rapid fire ?

File: DSC02484.jpg (144KB, 640x480px) Image search: [Google]

144KB, 640x480px

>>30300875
this one may windup on gunbroker.

>>30302004
Hmmm, let's see.

>>30302576
Good looking rifle. Just bored with it?

File: IMG_20160616_211447621.jpg (4MB, 4320x2432px) Image search: [Google]

4MB, 4320x2432px

>>30302676
I'm'a go with "not really". About 150 rounds so far, 25 fired at about 1 every second or 2. Actually, that almost looks like fouling coming out from the gas port... Maybe that's why it's acting under gassed.

File: IMG_20160616_211412963.jpg (3MB, 4320x2432px) Image search: [Google]

3MB, 4320x2432px

>>30302738
Fucking a. Black dust on the outside of the gas tube at the seal.

>>30302779
Varry interdesting.... Apparently that's normal. Huh. My first build, so, guess I just learned something.

>>30302738
>>30302779
Nice. This was my one concern with these.

Think I'll get mine in walnut.

>>30302691
made it a little too nice. still up in the air about selling it. bought a barrett, need to pay for it.
85% new parts. upper is PM A1 with colt heavy barrel. all wrapped in dura-coat.
its impressive to say the least.

File: DSC02893.jpg (141KB, 640x480px) Image search: [Google]

141KB, 640x480px

>>30302691
its also unfired.

File: DSC02891.jpg (136KB, 640x480px) Image search: [Google]

136KB, 640x480px

>>30303262

File: DSC02889.jpg (142KB, 640x480px) Image search: [Google]

142KB, 640x480px

>>30303272
I'm good with my hands.

>>30303262
>>30303272
>>30303282
It's such a handsome rifle. Why get rid of it?

File: DSC02882.jpg (143KB, 640x480px) Image search: [Google]

143KB, 640x480px

>>30303282
one last pic.

File: 2015-08-20 17.43.32.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

yadda yadda nuclear winter

Is it really that hard to ask a carpenter to custom make some of these parts? I'm sure some brown color spraypaint would also be an easy way to make the lower a relatively close match to the wood for that "one piece stock" look.

>>30303583
It takes a carpenter ten years, and one sacrificial goat to even get the gods permission to carve the very wood itself!
Do you know nothing of the customs of firearm furniture?!

>>30300886
...why the fuck would the ATF give a shit about wooden furniture on an AR?

>>30303792
It makes it less black and scary allowing you to murder more children before anyone realizes.

>>30303262
>>30303272
what wood/stain combo did you use?

>>30303305
What were you thinking about for an opening price? I might have to keep an extra watchful eye out.

>>30303305
>My actual erection....
T-thank you anon.

>>30300885
>>30300929
you're also gonna need an A1 style upper for the sight handle, a 20rnd stick mag, A2 style pistol grip in wood, and of course the rifle length barrel.
it doesn't seem to have a flash hider although it does have something on the threads, but just go with a birdcage flash hider.
unfortunately with this setup if you're 100% faithful I don't think you'll be able to run it in .50 Beowulf like in the game.

>>30307157
If you wanted to be even more faithful, you'd need it to be a right-side charging upper, so an A1 would be out of the question. Just slap a carry handle on top and you're good

>>30307157
no, you'd need an A2 upper because of the brass deflector. actually you'd need a receiver that has the upper and lower as one piece but that doesnt exist or at least would suck to build.

do they not make 20" beowulf barrels? even if they dont only the survivalist rifle uses that round anyways, or rather a round that i assume to be that as I said in >>30301615