/akg/ AK General

File: WP_20150420_13_12_52_Pro.jpg (850KB, 1918x1077px) Image search: [Google]

850KB, 1918x1077px

62 GodTier!

File: GoodfellasLel.gif (2MB, 230x175px) Image search: [Google]

2MB, 230x175px

>>29446138

>he lives in the US
>he buys AKs even though they are as expensive as mid-tier ARs at this point

File: WP_20150421_15_16_26_Pro.jpg (863KB, 1077x1918px) Image search: [Google]

863KB, 1077x1918px

>>29446162
Sorry for the potato quality

File: SLR_dissy1.jpg (2MB, 2448x3264px) Image search: [Google]

2MB, 2448x3264px

>>29446170

>he doesnt own both

File: idort.jpg (7KB, 170x170px) Image search: [Google]

7KB, 170x170px

>>29446219

File: WP_20140924_002.jpg (4MB, 2000x3552px) Image search: [Google]

4MB, 2000x3552px

>>29446162
that's a funny way to spell 95

Painukaa vittuun /k/sta suomihomot.

>>29446463
>Finnish edition
>Postaa RK
>Vitun Suomihomot

File: nido_SAR-3.jpg (82KB, 960x720px) Image search: [Google]

82KB, 960x720px

>>29446138
Man I want a Valhalla AK...

Here's mine, same old.

File: WP_20140613_004.jpg (2MB, 3552x2000px) Image search: [Google]

2MB, 3552x2000px

>>29446467
>Tää! :D

left, RK-62
center, RK-62 TP
right, RK-95

File: IMG_20160304_062021799_TOP.jpg (2MB, 2340x4160px) Image search: [Google]

2MB, 2340x4160px

>>29446471
>NATO length buttstock
Spooky skeleton confirmed.

File: WP_20160319_006.jpg (4MB, 2000x3552px) Image search: [Google]

4MB, 2000x3552px

>>29446471
>>29446506
Even NATO length is too tiny for me

Terveisin,
180cm

File: opsec.jpg (215KB, 720x540px) Image search: [Google]

215KB, 720x540px

I miss my 804714.

Anyone have a RD?
Can't decide between a high end AK or an sr-15

File: 20160331_091640.jpg (1MB, 3264x1836px) Image search: [Google]

1MB, 3264x1836px

>>29446138
Finally a finnish ak general. Can I use a normal rpk bolt and gas system on a valmet if I replace the barrel? I don't link the whole dust cover holds the gas tube on thing and the thick ass general area lmg sights.

post yfw you didnt fall for the RAS47 is shit meme....and were right

File: Capture.png (1MB, 1161x646px) Image search: [Google]

1MB, 1161x646px

>>29447342
>mfw

>>29447342
>I shot two mags through my RAS-47 and it didn't fall apart and only jammed once
>now I'm going to shitpost on 4chan to justify my purchase and I'm going to outright lie about my round count
Get insured if you're not already

File: 20160330_170038_HDR_zpsxvy8kvxb.jpg (36KB, 480x360px) Image search: [Google]

36KB, 480x360px

The green poly furniture set with presentation plate is up for sale.

>Only $6900 + $2100 if you want a second mag

>>29447662
Literally CSGO skins. Does nothing at all except look different. Sometimes for a stupid amount of money.

>>29446170
>mid tier AR
>600 dollars

>>29446479
Whats the difference between a RK-62 and a RK-62 TP?

>>29447662
Shit it even comes with the little plate. Cool. Going for less than I thought it would tbqh

>>29447308
They are worth it. I've shot a couple of their builds. From SBRs to custom work.

>>29447916
TP = taittoperä = folding stock

So can someone give me the tier list of AKs?

>>29448097
>low to high only stuff you should consider
wasr / opap(zastava)npap?
Saiga
DDI
Arsenal/ Vepr / norinco / east german
valmet >(u rich bastard)

>>29447342
>can't go 3000 rounds before the sights disintegrate

Are you referring to the 7-minute damage control video from the Yeagerdrone?

Can't actually find HD pictures of the guy's internals, but I'm actually shocked at how fucked up AKOU's RAS-47 already is, so one guy (who voluntarily chooses to work for James Yeager) saying "Naw it's fine trust me" especially when I can see some deformation on the bolt that he's saying isn't deformed isn't exactly debunking Century's thorough BTFOing by AKOU.

File: 1451788568647.jpg (54KB, 600x663px) Image search: [Google]

54KB, 600x663px

>>29448097

File: 1433269417408.jpg (52KB, 600x823px) Image search: [Google]

52KB, 600x823px

>>29448097
>>29448461
There. No complicated ass gay shit, straight to the point

>>29446553
warsaw is fine

terveisin,
192cm

>>29448403
Also
>The same weird grooves getting carved into the gas piston in the AKOU are clearly visible in the TR video even through the built-up grime

Yeah it's g2g right bro?

>>29448658
>>29446553
5'10" (177.8 EuroInches according to Google) and I prefer NATO to Warsaw unless I've got shit like a chest rig or thick coat on.

I also have gorilla arms and wear glasses which are both factors I think.

>>29448736
they are factors

File: aroundfinns.gif (806KB, 844x475px) Image search: [Google]

806KB, 844x475px

>>29446138
>>29446162
>>29446330
>>29446479

File: Attach479_20160120_183607.jpg (204KB, 895x540px) Image search: [Google]

204KB, 895x540px

Posting galil

>>29448333
are zastava akms worth it?
looking for an ak on a budget, don't really mind shit tier manufacturing as long as it works and won't blow up

File: 1453571348581.jpg (180KB, 1287x1191px) Image search: [Google]

180KB, 1287x1191px

>>29446170
>AR bean babies can't keep their shitposting in their containment thread

>>29449480
they are pretty good rifles the m90np is kinda wonky, everything else is a'okay

So based on >>29448461 and >>29448519 a DDI is a decent first AK? I could actually afford an Arsenal but then I wouldn't be able to afford any ammo. Also, How do you all feel about bumpstocks or slide-actions and are there any that fold?

>>29449613
you can bumpfire a normal stock ak with your finger if you practice
>its a meme

>>29449480
Pretty fucking solid manufacturing actually.

Just like every other AK, inspect the fucker before you buy it but Zastavas are good guns.

However WASRs are a better intro to the AK platform overall, as Zastava guns use proprietary furniture and have a bunch of nonstandard features.

>>29449613
Word so far is that DDI are damn good guns.

>How do you all feel about bumpstocks or slide-actions and are there any that fold?
You posted in the last thread asking about the RAS47 with the bumpfire stock, right?

They're bullshit that's fun for maybe a trip to the range. Makes the gun more-or-less useless for any practical purpose, introduces a lot of unnecessary wear and tear. Maybe it sounds cool for a minute but you won't hit anything and it's honestly not as fun as it sounds to empty a mag in 3 seconds when you're paying $.25/rnd.

If you want a folding stock, save up for the Arsenal. There are solutions if you want to install a side-folder on a fixed-stock AK but they're all less solid, don't look as good, and are expensive enough that once you factor in cost of the rifle plus the parts a factory folder's usually the better investment.

>tfw want to put Manticore triangle/Stormwerkz hinge combo on my Yugo but can't justify spending ~$250 to do that to a gun I paid $500 for.

File: 1.png (2MB, 1142x857px) Image search: [Google]

2MB, 1142x857px

ammo is becoming pricey and it saddens me.

>>29449613
>How do you all feel about bumpstocks or slide-actions and are there any that fold?
Full-auto is for suppression.

AKs on full-auto fire at 600 rnds/minute

Which means a standard mag is empty in 3 seconds.

USELESS
S
E
L
E
S
S

>>29449746
How would you compare DDI to WASR? You said the WASR was a great intro because it lacks non-standard features ( or rather, it comes with none of those bothersome extras an entry-level AK shouldn't have ) and if the DDI are the same way I might go with them simply because I like the coloring of the wood furniture better.

>>29449788
Can I also ask how AKG feel about the "High Standard" brand of A.K. ? I found them on the Atlantic Arms website but I noticed nobody has said a thing about them in this thread or the last.

>>29449788
If all you're worried about is the color of the wood, surplus laminate furniture sets aren't that expensive, bro.

Sandpaper and the wood finishing products of your choice are even cheaper.

File: WP_20140314_007.jpg (2MB, 3552x2000px) Image search: [Google]

2MB, 3552x2000px

>>29449242
for you

>>29449849
Unknown quantity.

Which makes them a gamble in the AK world, because a lot of shit can go wrong when building an AK.

If you're new to AKs, it's bad to gamble. Ask all the dudes out there regretting RAS47s or IO AKs.

>>29449849
>High Standard
Otherwise known as Interarms or IAC.

Seems like one of those companies like Lancaster (now Petronov Arms) who keep renaming and restructuring their company trying to ditch the poor rep that goes with their name.

Caveat Emptor

>>29449876
The furniture isn't all I'm worried about; it is prob the least of my concerns but if the DDI is better built while still remaining a "basic" ( and better looking ) A.K. it would just interest me that much more.

File: 120957_152338246_Valmet 1.jpg (133KB, 1200x750px) Image search: [Google]

133KB, 1200x750px

>>29447305

File: 20160328_181737.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

>>29449746
I could and did. I'm ordering the sling mount and a sling to put on the hinge tonight. Lipstick on a pig sure. But that pig does anal and swallows.

>>29449401
Anyone know if the bolt hold open safety causes any odd wear on a rifle? I kinda like the idea of it but don't know if I want to go through with it and make my rifle worse.

>>29450766
It's the same exact thing with a little section cut out. It's not going to change anything.

File: AKTup.jpg (159KB, 750x1334px) Image search: [Google]

159KB, 750x1334px

Took the AKT for a spin for the first time today. It's nice. Takes some getting used to though, since its so light, accidentally simulated burst fire a couple times because the reset is so short and the pull is so light.

Massive improvement from Arsenal factory trigger.

I have put about 1000 rounds through my rifle and noticed that the dovetail on the bolt carrie is rather heavily peened. The carrier sticks in the recoil spring every few rounds. The fire control group is Tapco G2 which I understand has problems with the hammer. Should I file away the peening and carry on? The rifle functions fine, at least up to this point.

>>29451012
replace that overhardened G2 hammer its smashing your ak up

>>29451025
ok thats what I thought I was thinking of getting an ALG. Should I just file down the burs an not shoot it until I get a new group?

>>29451051
its mainly the sharp angle the G2 has, other surplus trigger groups have a smooth curve. but yea smooth it out and get an ALG
>lotsa vids on youtube about fixing the g2

>>29450963
Same senpai. That's why I put that extra little spring that comes with the trigger that adds about an extra lb of weight.

>>29446138
Anyone know of a place still selling 7.62x39 galil barrels?

I got a raise the other day so I want to spend an irresponsible amount of money on a new build.

>>29451626
How's the pull weight with the extra spring? Do you have a G2 to compare it to?

Thinking about getting one but I'd like it to be heavy enough to avoid ND's and accidental double taps (happens with the G2 sometimes when I try to creep up on the reset)

Can you get an M62S in the US?

>>29446138
>>29446162
>>29446205
>>29446676
>>29449877
>>29450303
SERIOUSLY FUCK THE 62

mine jammed nonstop and the sights wiggled all over the place

>>29451751
Buy one and try it yourself. One guys subjective opinion that isnt yours shouldn't be the final say. I have G2s in my WASR and AMD-65 and my ALG AKT in my SLR-104FR w/the extra spring. I've never had that issue with the reset on my G2s and definitely not had that issue with my ALG AKT.

>>29449401
I don't know it it's normal but if I put the bolt of my M92 in the safety notch and shake the rifle the bolt will release

>>29451961
well ok jeez

File: 20160331_150409.jpg (3MB, 4160x2340px) Image search: [Google]

3MB, 4160x2340px

My new babey. Keep like this or get a wooden upper hand guard?

File: 705280_01_unused_condition_fits_most_aks_640.jpg (25KB, 640x383px) Image search: [Google]

25KB, 640x383px

>>29452138

5.45 or 7.62?
Looking for my first AK and found some cheap Zastava AKMs, but the performance of 5.45 is appealing.
AKM is going to cost around 620 or so w/ shipping, FFL and tax, while a 74 would likely cost about 50 or so more.
Probably not going to do more then target shooting, but the bigger round for 7.62 is only somewhat less appealing then the better ballistics of 5.45
Ammo prices look similar, I could find both for around 23c/rd.

>>29452203
Mother of god! What is the name of this and who do I throw money to?

>>29452217
Sheetmetal handguard.
Your local hardware store, because the florida shop that sells them is a scam that ships maybe 1 in 20 purchases.

>>29446138
I really like just reading about various types of AKs from different countries. I'm curious about the manufacturing of my imported Romy G and the manufacturing of Russian AKs as well as others like Bulgarians and such. Also, if anyone knows of any documentaries of Romania's history I'd love to dig my teeth into it.

File: akpartsandhotwhls001-1.jpg (38KB, 480x360px) Image search: [Google]

38KB, 480x360px

>>29452217
You don't.
They haven't been imported since the early 90s.
>Colloquially it's called a chinese cheese grater.
It's also a "gas tube with steel ventilated handguard".
The last couple I saw, went for more than $100.
>Inb4 Florida gun works link inevitably gets posted

>>29451968
u needa bend in your safety lever
add more tension

File: 1459209830598.jpg (41KB, 499x665px) Image search: [Google]

41KB, 499x665px

>>29452418

>>29452553
Fuck

>>29452452
>>29452203
Why are these so rare?

Even fake airsoft version are out of stock e

>>29452641
Because they're kind of a stupid idea, and people didn't buy them much when they were readily available.
Now they're "rare" and people new to AKs think it looks cool.
>Hot gas is moving through the gas tube, not the brightest idea to cover it in metal.

1 mag dump then you touch it and have a pattern melted into your hand, the novelty of the looks of it go away.

File: crooked.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>29451626
>>29451751

I was wondering what that extra spring was.

Put in that extra spring just now, made a huge difference.

Take up has a bit of resistance now, and the reset is cleaner as well. Much better feed back, more predictable. If only I did that before I went shooting today. Guess I'll have to go again soon.

>>29452641
>>29452709
cant u buy a grater, roll it flat ,and cut in into a handguard-like shape?

So, has anyone else been looking at the green AK furniture and mags in these threads, and looking at a spray can of matte "hunter green" paint, and thinking inappropriate thoughts?

My AK is in 7.62 and there's a lack of appropriate slabsided mags that are inexpensive enough to paint up and reliable enough to be worth the effort of painting, even for a range toy.

Talk me into it or out of it, /k/.

Guys, what's the average price for 45rnd molot waffles?

>>29452875

kek.

>>29452945

why tho? the authentic green bakelite is cool because of the story behind it, and its rarity. A rattle can green AK would be terrible IMO

File: 1428206743961.jpg (276KB, 1890x1058px) Image search: [Google]

276KB, 1890x1058px

>>29452989
This isn't green bakelite: >>29447662. It's basically green colored plum furniture. Pic related is green bakelite.

>>29453023

I gotcha, I've been seeing the two variants posted in /akg/ and on arsenal forums. the bakelite is cool but would be hard/impossible to reproduce, the poly green looks dumb to me. Either way I don't think a spray painted green AK would look very good.

>>29453014
>Demetri! I take aesthetics picture ok?
>But Sergey my lever is still u-
>Is not of problem!

What's the story behind that green furniture

>>29453067
Russian boarder guard >special

File: 1428463006827.jpg (1MB, 1936x2592px) Image search: [Google]

1MB, 1936x2592px

>>29453057
Green AKs a best.
>>29453067
Special recognition for certain border guards or something.

File: SLR_dissy2.jpg (2MB, 2448x3264px) Image search: [Google]

2MB, 2448x3264px

>>29453084

>C39
>dyed green furniture

>best

556 AK best AK

File: 1432923740289.jpg (293KB, 1024x768px) Image search: [Google]

293KB, 1024x768px

>>29453145

File: akm74_005.jpg (255KB, 1800x1577px) Image search: [Google]

255KB, 1800x1577px

>>29453156

File: asshole.jpg (55KB, 500x375px) Image search: [Google]

55KB, 500x375px

>>29453156

better.

>>29452989
>why tho? the authentic green bakelite is cool because of the story behind it, and its rarity.

You have to admit it would be pretty meta.

>>29453084
That gives me a woody, actually. I might use matte green paint on the mag, for camouflage discipline purposes--glossy lacquer defeats the purpose.

Of course, around my AO, that kind of dark forest green is going to stand out like a sausage in a soup kitchen anyway. The northern half of the state has thick pine forests, but where I live it's mainly hardwood, and it snows half the year--so most of the year the softwood forests, or the little wood-lots that are all that remain of them, are tangled deadfalls, with a century's worth of rotting dead leaves on the ground gone all faded rusty brown, with black and grey bark, with khaki colored dead brush knee high to waist high everywhere.. It could almost be an advertisement for all those black-grey-brown civvy durr huntan camo patterns that seem specific to Eastern North American hardwood forests between Thanksgiving and Christmas, but which are what most of "the woods" look like most of the year up here, other than greening up very briefly during our short cool summer season.

>>29450766
>Anyone know if the bolt hold open safety causes any odd wear on a rifle?
Naw.

>>29451968
Mine does that too. It's just not a good design.

Honestly I think I'm gonna swap it for an un-notched safety as soon as I get ambitious enough. It doesn't look good and it doesn't work well.

File: putinponders.jpg (80KB, 520x750px) Image search: [Google]

80KB, 520x750px

>>29453223

Meh, its not for me. Your rifle tho, do your thing.

Need some help, familio. As far as i can tell, my ejector is not allowing my bolt to close correctly. It results in the carrier closing all but about an inch or so. Whenever I clear the jam, the round is not secure on the bolt face and does not eject. I would say that this happens one out of every five or so rounds. Any ideas for a remedy?

Hope this made sense

>>29453375
What kind of AK? Do you have any pics?

>>29453375
clean the extractor? sometimes it can fill with gunk and not grip the spent cases

>>29447341
Every time there's a discussion about Finnish assault rifles, foreigners only want to destroy them by modding them to oblivion.

Go drink a bottle of Cosmoline.

>>29453375

New rifle, or new problem on an old rifle?

Does the bolt close normally when not chambering a round? Is the bolt getting hung up on the ejector? Pull the bolt back and let it forward slowly and watch the ejector/feel for resistance when it meets the ejector.

Are you running the rifle dry or with lube?

Take a picture with a mag inserted (preferably with ammo) and the dust cover off. mag should sit evenly under the ejector.

>>29450546
Boy do I have some questions for you:

Manticore stock obviously. Stormwerkz hinge?

What mounting block did you use?

How much was the total cost of the whole setup? Is my $250 estimate about right?

Overall how would you rate the sturdiness of the system compared to the original buttstock? Did the LoP change a lot compared to the OG Yugo? I hate to phrase it this way but would you trust it in an SHTF-ish situation?

Also I never see pictures of the other side of these folders, where the actual hinge is located, or from the top down. How's it look from those angles?

Overall are you happy with it? Do you feel good about the 50% hike in your investment into this one rifle? Thar last one's my chief concern honestly...

File: 1449158116694.jpg (29KB, 960x498px) Image search: [Google]

29KB, 960x498px

>>29450546
>>29453486

bumping for interest. my buddy wants to do this to his WASR

>>29453375
Sounds to me like your bolt face is deformed somehow.

I had a similar problem with an SKS and the problem was a bent extractor.

>>29453251
Who needs that faggoty safety notch anyway?

>>29453597
Considering it's semi-functional at best, means the receiver inherently can't seal up as designed, and honestly yeah, I'm not huge on how it looks.

Unless you NEED a way to keep the bolt open it serves literally no purpose.

>>29453556
It's not really feasible for WASRs.
The tang would mean it'd need a huge adapter, then the hinge and stock past that.
It would be abominably long and goofy as the hinge would pivot about 3 inches behind the receiver.

File: 20160228_140051.jpg (3MB, 3264x1836px) Image search: [Google]

3MB, 3264x1836px

>>29453486
Yes it's. Manticore Arms stock and stormwerkz hinge. I bought it as a package deal for 160 not counting tax and shipping.

http://www.robertrtg.com/store/pc/MANTICORE-TRIANGLE-STOCK-WITH-HINGE-ASSEMBLY-4p3603.htm

I went with the Krebs custom block. Luckily for me my opap was already set up for an adapter so I didn't have to dremel out any spots in the block to fit.

You're definitely close to $250 maybe more if you spend more on shipping like I did.

The bolt that holds the adapter block in place did come loose but that's from me not tightening it down all the way because I didn't have the proper tools (cheap set of Allen wrenches) I remedied that with some loctite and a bit set that came with a tiny ratchet wrench that let me snug it up much easier without getting impeded by the receiver walls.

If you loctite every bolt (3) I'd trust it to stay put no matter what. The stock takes some getting used to when shouldering, but it feels sturdy and there's zero play or wiggle in any of the moving parts. You unlock the hinge by pressing up on the bottom left corner and pulling it to the side.

Honestly I love my rifle, but part me of wishes I would have just gotten an Arsenal SLR107FR for that sexy plum but I don't regret it.

Here's a side view.

File: 20160228_140120.jpg (1MB, 3264x1836px) Image search: [Google]

1MB, 3264x1836px

>>29453842
Folded to the side

>>29453870
Also its 6 bolts not 3. Forgot the stock bolts. It looks wonky in this picture because it is. I was switching it from the bottom set of mounting holes to the middle for shits and gigs and hadn't retightened them all the way so it was wonky.

>>29453910
You mean 5, right?
>1 through the receiver for the mounting block
>2 for the hinge to the mounting block
>2 for the stock to the hinge

Nice OPAP.
I have the exact setup on mine.

>>29453946
Yeah 5 bolts. I'm not all there. I'm 11 hours into my 12 hour shift so I'm a little exhausted and dumb. Thanks

>>29453910
>>29453870
>>29453842
Thanks family. Much obliged.

>>29453946
>I have the exact setup on mine.
Same set of questions to you if you don't mind: >>29453486

>>29453986
No problem.
Just making sure I wasn't missing one.
It's been a long time since I put mine on.

File: image.jpg (45KB, 293x473px) Image search: [Google]

45KB, 293x473px

>>29446162
>eotech
Nope

File: 1423131665633.jpg (1MB, 1788x1342px) Image search: [Google]

1MB, 1788x1342px

>>29454035
Sure, but it's basically the same answers.

>>29453486
>Stormwerkz hinge?
Yeah, the ACE doesn't have dual locking lugs, so it won't lock folded.

>What mounting block did you use?
Krebs Custom, because the ACE block mounts funky, and the mounting holes aren't centered on it, unlike the Krebs

>How much was the total cost of the whole setup? Is my $250 estimate about right?
Sounds about right after shipping.
$160 for the stock/hinge combo, $65 for the krebs block.

>Overall how would you rate the sturdiness of the system compared to the original buttstock?
It's rock solid. It's a milled chunk of aluminum and the hinge locks solidly.

>Did the LoP change a lot compared to the OG Yugo?
If I recall correctly, with the hinge and mounting block, it's the same LOP as the standard fixed stock.

>I hate to phrase it this way but would you trust it in an SHTF-ish situation?
Oh yeah. It'll easily crack skulls with a buttstroke, and it probably won't even hurt the finish.

>Overall are you happy with it?
Definately. I knew I was going to get it before I even bought my rifle.

>Do you feel good about the 50% hike in your investment into this one rifle?
As for "investment", I don't look at it that way. It was just the components I wanted and they cost a certain amount.
It's only money, I'll make more.

I also have one of the older OPAPs that has the night sight cutouts that I found the components for and replaced (they were not on the rifle when it was imported because tritium is a regulated material)
Got new tritium as well.

Here's a rather old pic of it.
It looks pretty much the same, except the sling mount under the grip has been replaced by a swivel on the hinge.
>And my tourniquet is a little worse for wear

File: 1420359071875.jpg (2MB, 3648x2736px) Image search: [Google]

2MB, 3648x2736px

>>29454296
And here's the night sights on both my Yugos.

File: 56kLrn4-1.jpg (389KB, 2764x1843px) Image search: [Google]

389KB, 2764x1843px

>>29454296
Other opap anon here

You put a standard rear sling mount on the hinge block like pic related? That's what I'm hoping to do.

File: 1426952845850.jpg (12KB, 493x471px) Image search: [Google]

12KB, 493x471px

https://www.classicfirearms.com/ddi-ak-74-stamped-fixed-stock-premium-grade-phoenix-houge

Just ordered one of these as my first AK.
How'd I do?

>>29454413
Those stocks are disgusting, just like your taste in stocks

>>29454413
DDI is pretty solid. You should be fine.

>>29454400
Yep. I was going to post that pic too.
I used an EG swivel, and drilled a hole in it though.
>This one in particular from Kvar

http://www.k-var.com/shop/AK-129EGC.html

The screw doesn't quite sit flush though so I'm trying to find an alternative.
But the swivel doesn't look as out of place as the one from that pic, half cut off.

alright /ak/

While waiting for my WASR-10 to get here I decided I was gonna strip and refinish the stock myself when I noticed that the pistol grip is synthetic or polymer or whatever it's called. Where can I get just the pistol grip part without getting a whole set of furniture? Also heres the tutorial I'll be following

http://wasr-10.com/how-to-refinish-AK-furniture

>>29454580
Almost all AK grips ever are polymer bro.

File: 1419641448301.jpg (31KB, 502x432px) Image search: [Google]

31KB, 502x432px

>>29454593
Fug. Well I oughtta be able to find one somewhere. I want to be get a nice set of wood furniture before I tacticool it out.

Also how does that tutorial look for brand new furniture? It just occured to me that the stuff he uses is worn out as fuck

File: 19337.jpg (216KB, 900x1600px) Image search: [Google]

216KB, 900x1600px

>>29454400
Here's what my swivel looks like mounted.

>>29451946

And it never come to your mind to report to your superiors about it?

I once got a bad (rear sight tangent adjuster spring broken - rear sight did not stay in the correct setting) RK 62 issued to me for refresher training. When I spotted the problem I immediately reported about it and got the rifle replaced right away.

With the problems that you listed that rifle should have gone to armorers to be fixed.

File: 1459111933737.jpg (442KB, 1600x1039px) Image search: [Google]

442KB, 1600x1039px

I know almost nothing about AK's.
I think Russian wood generally looks like shit, am not a huge fan of polymer, and don't like folding stocks.
Now give me a hipster AK that isn't over 3 grand, and is preferably less than $1000.

Additionally, whats /k/'s opinion of 308 Valmets, is it possible for me to get one (American), and how much do they run for?
After that, is it possible for me to get a Galil, and how much would I pay for one (or to convert something else into one)?

I don't know whose picture this is, but the top two are sexy as fuck.

>>29454688
Try the WASR-10, it's right up your alley except the wood looks like shit

File: 20160329_133926.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

Best RK

>>29454717
>WASR
I thought those were extremely shit.
Maybe that's just 4 year old memes stuck in my head, but I distinctly remember /k/ hating those for a long time.

File: Sako_Kobra_1.jpg (35KB, 799x292px) Image search: [Google]

35KB, 799x292px

>>29446138

Old photo of my Sako 92S - I have since replaced original muzzle brake with locally manufactured AK-74 type muzzle brake designed for 7.62-mm rifles. I bought this one new in mid 1990's, when they cost fraction of the price. Sight is Russian Kobra red-dot attached with standard AK-rail, which has new set of holes that fits to original optics rail attachment holes that 92S on its receiver straight from the factory. The red-dot (and IOR 4X rifle scope that is alternative sight for this setup) are used with receiver cover that has no rear sight to keep them low enough for good ergonomics. This rifle has permanent modifications.

>>29454688

lurk more faggot

>>29454764
Well they'd better not be shit because my first AK is a wasr-10 and it's on the way in the mail right now.

But I watched quite a few youtube reviews and they all mentioned people hating WASR-10, and that most or all of the kinks had been worked out.

Inter Ordinance still sucks though, not even the guy at the lgs tried to shill that on me when I asked about AK's

>>29454780
>man wants to buy Ak
>should he ask /ak/ or wait until someone else does
hmmmm

>>29454767

Damn typo in the last sentence - should be: This rifle has NO permanent modifications. I still have the original muzzle brake and there are no extra holes in receiver, so I can get back to original configuration when needed.

>>29454764
expect some cant
rifle is decent apart from that, and the wood.

refinish the wood, get a decent side mounted optic and it's not too bad of a gun imo

>>29454813
>refinish the wood

I don't wanna be that guy but is the tutorial I asked about good enough for a brand new crappy stock?
>>29454580

>>29454828
I think that's what I followed

I fucked up on the polyurethane bit, maybe try linseed oil instead

(or better yet just buy balkan war furniture and slap it on)


anyway if you go the refinishing route don't shoot it before doing it as the wood will get fouled and fuck it up completely

>>29454850
>buying furniture
I'd like to but the shits like 1-200$
Plus this way I'd at least learn something. I should note I've never messed with stripping/varnishing/staining wood or anything like that...

>don't shoot before refurnishing
What, like at all?

>>29454575
I plan on taking the hinge/stock assembly off an heading down to the local hardware store once the sling gets in so I can find the best fit for it. Why did you have to drill yours?

>>29454888
wtf?
since when has akm furniture been that expensive, what furniture are you looking at

and yes, not at all.

>>29454917
When I do find it it's places like this:
https://www.cheaperthandirt.com/product/timbersmith-premium-red-romanian-ak-47-stock-set-tim06000red-751348007465.do?sortby=ourPicks&refType=&from=fn

The AK in that tutorial looked pretty thoroughly beat up

File: d_689.jpg (33KB, 600x350px) Image search: [Google]

33KB, 600x350px

>>29454896
The swivel didn't have a hole, as it's meant for milled recievers.
So I drilled it, not the hinge.
>What it looked like when I bought it.

The screw itself is a standard 10/32.
Same as almost all sling swivel mounts.
I think it was a 10-32x1/4" screw if i recall correctly.

>>29454967
iunno man, i know surplus dries up but you could get like 3 sets of ak furniture for $25 just a year ago. id keep your eyes open at gun stores and generally the net. guess you could always refinish the wood first, then start looking for better furniture. that way you'd at least have something

>>29454984
I'm just having a lot of trouble believing I'm not supposed to put one round through the rifle before I refurnish it

>>29455015
hey man, your call. aks foul shit though. you're gonna have fouling and gunpowder and gun oil all over your hands.

>>29454967
Timbersmith is shit. It's pressboard tier.

Apex usually has more sets but these seem to be the only sets in stock right now.

>Needs hardware, not expensive but necessary
http://www.apexgunparts.com/romanian-ak47-akm-laminated-stock-and-handguard-set-refinished-w-blemish.html

>Has hardware (except sling swivel) but will probably need refinishing
http://www.apexgunparts.com/bulgarian-ak74-stock-set-wooden.html

Also, go look on the AKFiles Marketplace.
There's always sets for cheap.

>>29454981
Ah I misread. Feels solid though?

>>29455110
do you know where those balkan war stocks went?

did the supply dry up?

>>29455122
Yeah, the actual part that swivels is a little stiff because the screw is pressing on the area it pivots, but once I find a better screw it should free up and pivot more freely.

>>29455127
Yeah, pretty much. They were $25 for 3 sets, then it was $25 per set.
Now OOS, and I don't know if anymore are going to pop up.
But you never know.
There's always some take off furniture to be had though.

File: AK_Tubular_Sidefolder4.jpg (57KB, 750x562px) Image search: [Google]

57KB, 750x562px

Does anybody have one of these bonesteel arms folding stock's? I have a wasr 10 that I wanna "dress up".

>>29455079
That stuff can be cleaned up fairly easily though right?

>>29455110
Thanks m8, I'll look through these

>>29455170
Thanks for the info man. Looking forward to getting this sling set up now. Just gotta get a new trigger or smooth out the G2 after this.

>>29455110
Not sure what hardware means, like the pins to keep the lower handgueard in place and a sling clip?

File: 20150820_121348.jpg (109KB, 900x1600px) Image search: [Google]

109KB, 900x1600px

>>29455263
I also have an AKT on my OPAP.
Can't recommend it enough.
It did take a bit of fitting, but it was worth it.
It needed the roll pin, and I think it ended up being 9.9mm, ymmv though.

>The disconnect was too square and wouldn't let the trigger reset, so I had to round it off slightly to work with the full auto safety.
>Pic related
Top is modded, bottom is stock

>>29455281
Hardware is the buttplate, sling swivel, and screws for the stock, ferrule for the lower handguard and upper handguard retaining spring for, what else, the upper handguard.
>if it is indeed completely barren, but that's all the hardware.
It all can probably be found at Apex too.

>>29455507
Thanks m8.

Looks like I'll be going the home refurnishing route
I'll probably fuck it up but if that happens I think that's when I'll start thinking about getting a new set of furniture.

Also about those canted iron sights, is that something you have to take to a smith to fix? Or can you just twist them back?

Anybody know of any websites with 5.45x39 spam cans in stock? Are spam cans pretty much non existent due to Russian import ban?

>>29455507
That's what I was looking at. How difficult was fitting it and all that?

>>29455564
>Also about those canted iron sights, is that something you have to take to a smith to fix? Or can you just twist them back?

It's not something you can just "twist to fix". They need to be unpinned, set properly, drilled for the new position, and repinned.
Check the rifle before you accept it at your FFL.
You can refuse it and send it back, but once it's transferred to you, it can only be sent to the manufacturer.
Hopefully that won't be an issue and you'll get a fine one.

>>29455609
>Are spam cans pretty much non existent due to Russian import ban?

No, it because of the armor piercing ammo ban that affected 7n6 in '14.
I'm not sure if there's commercial ammo in spam cans, so that might be a thing.
But 7n6 has been drying up, and going up in price since it was banned and most places are OOS.

>>29455221
Those Polish Beryl ones are pretty reasonable check em out.

>>29455679
>Refuse to accept it from the FFL
That's nifty, I hadn;t thought of that. The rifle isn't from the actual FFL though, it's from Atlantic firarms and the FFL I had it sent to is just the lgs. Does that still apply if they're unafiliated with eachother?

File: 379148.jpg (35KB, 880x660px) Image search: [Google]

35KB, 880x660px

>>29455670
Maybe half hours worth if you're using a hand file to size the roll pin.
10 minutes for me with a dremel, going slow and test fitting often.
Make sure to check that the trigger resets, (I can almost bet it won't) and knock the edge off the rear shelf of the disconnect so it'll clear the trigger when the safety's off.
Once you start tinkering with it, you'll see what I'm talking about.
It was cleaner looking to mod the disconnect than the safety, so that's what I went with.
>Then hit everything I modded with a one of these paint pens to help make it resistant to the elements and dirt.

>>29455740
Yes.
You have to fill out and sign a 4473 at your LGS.
If you don't, then they have to ship it back.
But you got it from Atlantic, so even if you accept it and find out later it's screwy, they'll likely take care of you if you talk to them.

>>29455749
>so it'll clear the trigger when the safety's off
I meant so it'll clear the safety, when the safety's on "Fire".

>>29447662
I saw one of those deactivated border guard AKMs selling for like 800 bucks on a forum one time. I think it was a screencap off a Saiga forum from Russia.

Anyways its crazy to see what people will pay for stuff like this. Still pretty neat, but not 9000 dollars neat.

>>29455769
Thanks m8.

Also thanks all who helped me out in the thread, I don't know how many of you there are but yeah

My heart wants to begin refurnishing immediately but my gut (and everyone else) is telling me just to spend money on ammo at first and get used to owning a rifle first before I do anything

File: 15365.jpg (670KB, 1600x1200px) Image search: [Google]

670KB, 1600x1200px

>>29455807
I remember one going for $650 or ~45000r.
This one if I recall correctly.

>I think reverse image search will take you to the thread on AKForum.
And that green bakelite, not the polymer.

Could you imagine what these guys would ask for real green bakelite furniture?
20k is a safe bet.

>>29455714
Will they fit a wasr 10?

>>29455749
I'll screenshot this and read it when I get the trigger so I can work with it in front of me. I've already got a dremel I bought for rounding off some magazine tabs/fitting my bakelite grip. So maybe I can go that route.

File: green_002.jpg (337KB, 1800x859px) Image search: [Google]

337KB, 1800x859px

>>29455865
Didn't think that pic was that dark.
Lets see if this one is better.

>>29455714
Oh, nevermind. Those wire ones will but I had the 5.56 Polish Beryl with the cheek riser in mind when you said PB.

File: 16769.jpg (302KB, 900x1600px) Image search: [Google]

302KB, 900x1600px

>>29455880
Take it slow and test fit often.
And I looked, 9.9mm was what my pin length is.

If you're having trouble, just post your issue here.
I'm almost always here.

File: SDC10369.jpg (12KB, 480x175px) Image search: [Google]

12KB, 480x175px

Old pic.

>>29455906
I'll keep that in mind. I'll probably buy it next week and knock it out after work one night.

>>29455881
I'd pay like 1000 bucks for that furniture, and thats pushing it.

File: 1457152034346.png (97KB, 467x496px) Image search: [Google]

97KB, 467x496px

>>29456005
>>29455881
>1000 dollary doos
jesus fuck what is that monstrosity

File: tumblr_na5u4xA4v41rrmtkro2_540.jpg (80KB, 540x720px) Image search: [Google]

80KB, 540x720px

>>29456037
Unobtainium green bakelite border guard presentation rifle.
1 per year were awarded to the border guard of that year.
They didn't get to keep them, once their service is up it went into the trophy case (museum) on that base.
They aren't supposed to exist outside of that.
But things fall off trucks, and get sold.
>Did you think "Museum Grade" was just a meme?

>>29456005
For a grand, the guy who get one of the bakelite versions might let you hold it.
For a minute.
It'll be the only one, and it'll go for top dollar to someone with more money than sense.
And sit in a safe, besides being taken out for a few pics for bragging.

>>29456203
Pretty neat story to it but it's still fuck ugly

File: 1443462907908.png (376KB, 1209x622px) Image search: [Google]

376KB, 1209x622px

>>29456218
To you perhaps.
But to some serious Kalashnikov enthusiasts, that shit is the holy grail.

Before he died, Mikhail would go to the outposts and present the rifle to the recipient.

>>29456609
Just a comment based on your pic - remember the guy who had a firearm sent to him from Russia through some toy set? Yeah, we got him a few weeks later.

Much love, /k/.

>>29456609
I guess I'm the first guy on that list, except I just call them all AK's or 'the AK platform'

to be fair I did just find out what an AKM is, I think
Just a modernized AK right? Thought it was it's own rifle.

Also I need to start doing some serious reading to learn more about the AK platform

>>29456639
I find that unlikely. Also it's more common than anyone realizes.

File: The Kalashnikov Encyclopaedia Second Edition.jpg.opt642x765o0,0s642x765.jpg (67KB, 642x765px) Image search: [Google]

67KB, 642x765px

>>29456639
Sure thing kiddo.
He didn't have a "firearm" sent at all, junior agent.
Pieces do not constitute a whole, faggot.
>I just talked to him yesterday, too.

>>29456679
And that's ok.
You can't start out at full on wizard.
I learn something new everyday about AKs.
The only way you could get "instant" knowledge would be to get and commit to memory the entirety of the Kalashnikov Encyclopaedias.
>It's only 3,650 pages

>>29456753
>Kalashnikov Encyclopaedias
Is this something that can be bought in book form?

>>29456762
Yep. It's not cheap though.

http://www.kalashnikov-encyclopaedia.com/how-to-order-ii.php

>>29456785
that's okay, I once payed 150$ for this

http://www.amazon.com/NAPOLEONIC-UNIFORMS-Volumes-Volume-Boxed/dp/1932033750?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00


and eventually will pay 250$ for this

http://www.amazon.com/Napoleonic-Uniforms-Vols-3-4-Volume/dp/1883476208/ref=pd_sim_14_1?ie=UTF8&dpID=511V2PSVHNL&dpSrc=sims&preST=_AC_UL160_SR123%2C160_&refRID=0VP7DE87VJW1QP47ZCR6

>>29456799
Well it's right up your alley then.
And for the sheer volume of information, it's a pretty good deal.

>>29456816
I was about to ask if it's got diagrams and descriptions of parts and their function but it seems like it's what the books are all about. Aren't they coming out with new AK
s all the time though? Like would the second edition even have the AK-12?

File: IMG_20160401_120419.jpg (871KB, 3264x2448px) Image search: [Google]

871KB, 3264x2448px

Want 'em? $350 shipped. [email protected]

File: 1422328488975.jpg (199KB, 1024x768px) Image search: [Google]

199KB, 1024x768px

>>29451946
did you update your drivers?

>>29456837
Can get the same twice cheaper.

>>29456863
In the US? I highly doubt, my friend.

>>29456837
Damn, I fucked up, 300, not 350. Also, these are new condition Soviet plum mag, if you didn't understand.

>>29456698
No he's real and he's built several SVD's

>>29446138
Want a new ak, narrowed it down to an awo m76 (8mm or real fuckin nato) or an slr107ur. Won't be able to SBR it until after the new trust rules are implemented. Any advice, suggestions, or derision is appreciated.

I already have 4 x39 rifles and a bunch of kits, and nothing semiautomatic in 8mm or 7.62x51

>>29457582
Also why the fuck did that post with a name..

>>29457582

Have you considered something in 5.45?

>>29457584

it's april 1st, bruv.

>>29457584
April 1st

>>29457588
Have one AK in 5.56 but literally no interest in 5.45. I'm already in way too many calibers as it is and I can't afford to keep a few k 5.45 lying around while maintaining 7.62x39 and 9mm as much as I want to, plus mags.

>>29457614

I'd go the slr route then

File: MPiKM-1-1.jpg (4MB, 2813x1639px) Image search: [Google]

4MB, 2813x1639px

>>29454688
>hipster AK

You rang?

File: image.jpg (2MB, 1909x2546px) Image search: [Google]

2MB, 1909x2546px

5.45 is best

File: image.gif (138KB, 270x270px) Image search: [Google]

138KB, 270x270px

>>29457630

>>29456639
What's funny is that he was literally at a /k/ meet up just a few weeks ago, and spoke to me about a week ago.

Nice try, anon

>>29456860
jesus why

>>29458136
>SHALL
>NOT
>BE
>INFRINGED

File: image.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

Keep folding stock or get fixed wood?

>>29458362
Fixed wood, wire ak folders and underfolders are disgusting feeling if you actually like aiming down the sights.

>>29458362
Wire folders are uncomfortable and goofy-looking.

Underfolders are even more uncomfortable but cool-looking.

Triangle folders or fixed stocks are the best ways bro.

>>29455679
I thought the 7n6 ban was overturned

I'm about to pick up another can of 7n6 for 300$ tomorrow should I ?

File: Image1__05624.1384807291.1280.1280.jpg (50KB, 1000x593px) Image search: [Google]

50KB, 1000x593px

>>29458594
Hell no, why would you pay more for corrosive ammo than noncorrosive?
Last I checked, you could even get properly sealed noncorrosive barnaul ammo for less than that price. Pic related, even comes in a spam can.

>>29458634
I would much appreciate a link ?

File: 545 types2.jpg (312KB, 544x900px) Image search: [Google]

312KB, 544x900px

>>29458647
I just checked gundeals, I guess there's none to be found right now.
Get anything bear/barnaul, it's exactly the same minus the lacquer coating, sealant and spam can.

File: photo-64230-1.jpg (9KB, 250x250px) Image search: [Google]

9KB, 250x250px

>>29458568
>thinks any American gun lobbying group gives enough of a fuck about 7n6 to get the ban reversed

Bro if Ruger's stock isn't taking a hit the NRA couldn't give less of a fuck. Why do you think they cared about M855 but not 7n6?

I bet you think Chinese and Russian AKs are coming back soon too right?

And any day now prices will start dropping.

>>29458682
Thanks anyways that what I thought I know it's a shity price but I hate buying the cases of 750 for 60$ less

File: 545 stash.jpg (2MB, 1920x2560px) Image search: [Google]

2MB, 1920x2560px

>>29458706
I know...
But you can get 1200rds of wolf for 270 bucks plus shipping too. I haven't tried it myself, but I'm guessing it's fine ammo. I really do miss the days of cheap surplus, back when a 2160rd crate was 240 plus shipping.
http://www.aimsurplus.com/product.aspx?item=AW54539FMJ60

File: image.jpg (12KB, 75x125px) Image search: [Google]

12KB, 75x125px

>>29458764
Fuck man don't even show me that I'm going to cry I'm so late to the game on 5.45 and my slr is my favorite gun to shoot

Rolling for name

>>29458845
you couldn't have done that on /b/ or some other shitpost central board?

>>29446463

Finland is where Russia sent all their retarded and sick people

File: file.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

>posting it from another angle and you can't stop it.

>>29460203
Hey Kim, would you mind bumping with a less awful looking picture next time?

File: P1030099.jpg (3MB, 3648x2736px) Image search: [Google]

3MB, 3648x2736px

>>29460320
vehicle guns are fine

>>29460323
Sorry Nancy.

File: Jormungand Valmet.jpg (8KB, 225x225px) Image search: [Google]

8KB, 225x225px

>All this Valmet yet no Valmet
Shame

File: 2016-01-17%2011.28.08.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

My girl

>>29452977
In EU 90€

File: image.jpg (192KB, 780x1170px) Image search: [Google]

192KB, 780x1170px

Does any online retailer still have unconverted Saiga rifles in stock?

I'm poor so a retailer who offers layaway would be best. Thanks.

>>29460945
Sorry Ed, but I think that ship has sailed.

File: je9uny9a.jpg (153KB, 1289x1147px) Image search: [Google]

153KB, 1289x1147px

Show me the best places to buy parts kits im buying one today!

>>29461142
apex

>>29461142
Rguns

>>29449924
Interarms is still a separate branch they're just owned by High Standard now.

File: Screenshot_2016-04-01-19-08-33.png (261KB, 1080x1920px) Image search: [Google]

261KB, 1080x1920px

>>29461142
Are you the dude with no primary?
Also
>+you this post
Lol

ALERT

DDI receiver kits on centerfiresystems for $190

File: fug.jpg (906KB, 3264x2081px) Image search: [Google]

906KB, 3264x2081px

>finally buy an SLR-107FR
>taking it out of the trunk of my car when I get home
>box catches on a corner of the trunk and tears the shit out of the top of the box

Fug

>>29460945
>wants an unconverted saiga
>poor

Doesn't work like that anymore.

>>29462234
Arsenal boxes are a shit. They will tear eventually, very thing cardboard. The guns are gucci though.

>>29462234
>box catches on a corner of the trunk and tears the shit out of the top of the box

You're fucked. There's no way in hell the gun's gonna work now. Probably canted the sights along with it. Buy a new one.

File: unf.jpg (995KB, 3264x2120px) Image search: [Google]

995KB, 3264x2120px

>>29462258

Sure feels gucci, also fuck slowass unboxing montages, this is all coming out at once.

What optics should I get?

>>29462298
get a mount of some kind for western optic of choice, otherwise Kobras are good, Obzors are good, and a lot of people like the PKA-V. Personal preference man.

My wasr's bolt carrier is getting a scratch right above the handle

You know that little dimple on the dust cover on the right side? If you put the safety on its right where the safety lever flat part meets up with the dust cover. That dimple is hitting the bolt carrier when the handle moves passed it. So it's getting scratched up since it pushes the cover dimple thing out of the way.

Is there a fix? Or should I not care?

File: blyat.jpg (700KB, 2448x3024px) Image search: [Google]

700KB, 2448x3024px

>two off-center ports drilled into the compensator, and a third one drilled directly into the right side of it

I just noticed this, it looks nothing like the 74 style compensator on my old AK.

Guys, what slavic sorcery is this? I'm scared.

>>29462382
Was your old 74-style a Tapco, by any chance?

File: smol mode.jpg (526KB, 3264x2448px) Image search: [Google]

526KB, 3264x2448px

>>29462422

As a matter of fact, it was.

I'm getting the feeling I'm about to be kek'd at.

>>29462382
You appear to have the genuine article there, a real '74 brake made with real Slav gun magic. It most likely works significantly better than the Tapco copies that only resemble it superficially and don't have the original's multiple chambers and baffles and so on.

>>29462376
All AKs will do that really, the solution is to not try and charge the rifle with the safety on, because you're not supposed to do that

>>29462382
That's how real 74 style brakes are lel

>>29462820
No I mean the dust cover is scratching the bolt carrier

With the little dimple on the right side

>>29462449
Incoming bukeke.

>>29462891
There shouldn't be a dimple on your dust cover. Are you talking about where the dust cover folds in right at the ejection port? The brass deflecting area? If that's contacting your bolt carrier then just file it out until it doesn't rub anymore. Must dust cover rubbed on one of my bolt carriers, unfortunately I didn't notice it was happening til I had dicked up the finish pretty bad. But I just filed it out and the problem was solved.

File: image.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

>>29462298

Just got mine too. Hi bro.

>>29462983
>>29462382
Anybody else feel good seeing people buy AKs? Especially if I know it's their first salt rifle. Feels like there's more people on our side when I see it.

>>29463012

>>29462983 here. This is the first and only firearm I own. I figured I might as well skip the whole nugget and wasr thing.

>>29462211
Link?

>>29463012
>on our side
literally autism

>>29462983
>>29462234 here

Pretty sexy looking rifle desu

>>29462234
who gives a shit about the box.

File: final produkt2.jpg (866KB, 1536x864px) Image search: [Google]

866KB, 1536x864px

>>29452989
>A rattle can green AK would be terrible IMO

it's not so bad

>>29463839

that looks like AIDS

File: ak16.png (2MB, 1098x1020px) Image search: [Google]

2MB, 1098x1020px

ultimak installed

File: 20160401_224705.jpg (1MB, 3264x1840px) Image search: [Google]

1MB, 3264x1840px

Just finished installing the AKT trigger in my SLR-106FR. I'm excited, I think I'm going to go out tomorrow after work to try it out. The stock Arsenal trigger was absolute shit, and my WASR's G2 is much better. If I end up liking the AKT enough I'll put one in my WASR.

Also picked up my buffer tube kit and a Magpul CTR stock, as the WASR is getting the Rifle Dynamics adapter as soon as it comes in the mail.

File: 75rnd_drum_magazine_ak-47_pap_m92_pistol_3.jpg (55KB, 800x600px) Image search: [Google]

55KB, 800x600px

Are drum mags worth it?

If so, which one should I get?

>>29464500
your 3 choices are russian, romanian and chinese drums

Any input on gp1975's? A guy in my area is selling one for 650.

File: 1458622716072.png (3MB, 1602x1609px) Image search: [Google]

3MB, 1602x1609px

Are we done with the names yet?

Also, does anyone know this guys insta?
I've tried finding it but having no luck.

File: 1459058534462.jpg (318KB, 1024x1365px) Image search: [Google]

318KB, 1024x1365px

>>29465304
>Are we done with the names yet?
Whoo hoo.
Anon once again.

>>29458803
The fuck is this image?
Antman sympathizer.

>>29464560
i'll stick to chicken thanks

Which SAM7 should I get familia? I want one with the ambi safety, but im not sure how i feel about the folding stock, the regular stock is boneriffic

>>29463852
fite me irl
come at me sempai

>>29465750
The one with the fixed stock.

My father has one. I don't enjoy shooting it.

>>29465304
https://instagram.com/p/BDRV81ENHRs/

>>29465899
Cпacибo тoвapищ

File: 1455618398193.jpg (103KB, 501x640px) Image search: [Google]

103KB, 501x640px

>>29465980
Пoжaлyйcтa

Kalashnabump

>>29466241
Is that key mod on the sides and bottoms and then mlok in between them?

File: image.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

Well this followed me home for a small sum 0f 590$

>>29467833
Anywhere someone can buy this or just a section of receiver with it just for curiosity sake?
I know gun disassembly 2 is pretty good, but I like things I can hold and manipulate in my hands.

File: 545 aim surplus.png (431KB, 1431x909px) Image search: [Google]

431KB, 1431x909px

>>29467963
Ouch, crates aren't what they used to be.
Also, you could have had 2350rds of noncorrosive for that dollar amount, and I accounted for $40 of that 590 just for shipping in that equation.

>>29468049
Ya but I can't even find them now, so I said fuck it and from now on I'll buy commercial

does anyone know if the surplus stock sets from Apex come with the mounting hardware?

File: 545clips.jpg (807KB, 2397x1151px) Image search: [Google]

807KB, 2397x1151px

>>29468069
Nothing wrong with having some just to have it, there's some major cool factor to the surplus stuff.

>>29468024
Check out apexgunparts, or e-sarco

>>29468091
Tho honestly it really not that far commercial ammo
>corrosive doesn't bother me in az

>>29468162
It's not a big deal to me either in MN, I spend all of 5 mins or so cleaning.
But I'd still rather not, except on the psl since commercial 54r is a lot different in price than the cheap stuff I've stocked up on over the years.

File: ek 8-14-15 mag pm 009_0.jpg (47KB, 640x480px) Image search: [Google]

47KB, 640x480px

>>29465311

Where can I get those 7.62x39 bakelite mags, and for how much?

They are so sex.

Kek. Mfw when I have 16 crates of 7n6.

File: 584.jpg (269KB, 1024x577px) Image search: [Google]

269KB, 1024x577px

>>29468225
>5.45x39

>>29466241

Cool to see the magpul stock in military use

Thoughts on the korean steel mags? Is there a reason why they are cheaper than used steel?

>>29468248
Can't tell if ruse or not

>>29468254
Because they're terrible.

>>29468254
>>29468262

When people say "Korean" mags, are they newly made in the South for export, or are they old Nork surplus that somehow made it stateside?

Also, how do you know if it's Korean or not?

>>29468286
new south korean export magazines. It says "Made in Korea" on the bottom.

>>29467963
>tfw last winter bought two crates off of some Armslist guy who lost his job for $600 total

I've got a 5 round mag that reads "MADE IN CHINA" on the base plate
Is it just a Norinco mag or could it be a Polytech mag?

File: SLR-107FR.jpg (49KB, 660x371px) Image search: [Google]

49KB, 660x371px

>>29465750

I have an SLR-107FR, and it has a folding stock that is excellent and rock solid. However, it's a full size, non-skeleton stock.

If the SAM7 comes with a stock like this, get it. If not, get a non-folder. Avoid the spooky skeleton stock.

>>29468315
If it's not marked "CHINA POLY" and doesn't have a chrome follower, it's just a run of the mill chinese mag.

New thread

>>29468981

>>29468981

>>29468981

>>29446138

the fact a modern european country would use some shit tier peasant rifle blows my fucking mind. same with south africa