Muzzle flash edition
Old thread >>29362172
>>29368107
First?
Hey guys, I built my AR last year. After damaging a receiver trying to put a barrel nut on, I figured I should buy another upper receiver and have a reputable gunsmith do it.
After reading great reviews for "Firearms Service Center" I took my pieces up there to get get it finally built.
After that, I shot it, it shot fine. Jammed on some steel ammo, ate through some brass ammo.
Then I didn't do anything with it for 8 months.
I took it back out, and it started low gassing. Not fully expelling the spent round before the first one wanted to go back in.
I off my handguard, and my gasblock was off, and pic related was what I saw. The "I'm da AR guy I built dem in da army" guy at the range said this was likely the problem. But I haven't shot it since realigning it with some calipers and specs.
The big issue I have is. I got to looking at my gun, and my handguard is damaged. The way it fits onto the barrel nut is warped and some teeth are chipped on that same handguard. Which is a $180 one from midwest industries.
Should I go up to the service center and ask them to do something about this? It has been 8 months and I've put a 200 rounds through the gun since. But damage to my handguard is unacceptable to me. Along with, there were a lot of marks on the bottom of the gas block where it looks like they realigned the block quite a few times.
What do, other than shoot my gun soon to make sure that gas problem is gone?
babbys first build
poorfag state armory melonite upper
Shpikes Tacticool Pork-eating crusader lower
Primary Arms ACSS x3
>>29368245
>>29368245
>>29368300
You should take it back and see what they say. Then watch a fucking youtube video and do that shit yourself next time
>>29368300
>>29368245
sorry matw, but nothing would likely happen in your favor since you waited so long before checking your gun.
protip. INSPECT YOUR FIREARM AT THE GUNSMITH RIGHT AFTER THEY GIVE IT BACK
>>29368342
protip don't take your gun to a """gunsmith"""
>>29368358
How else do people get their MOE furniture on their AR?
This heeer is a moozle flash m8
>>29368342
>>29368322
I figured just seeing what they'd say is logical. But, I agree I waited too fucking long. I hadn't had the money to take it out, and the initial wait to actually look at the fucking gun probably proves I'm a stupid sob.
Otherwise, I personally really didn't like how the Midwest Industries barrel nut bolted on, is there any 15 inch free float guard I could look at with a more secure torque transfer? I think that was one of the main reasons they fucked up.
I don't really like the multi-rail edgy look though. This rail is the best looking to me, I just don't like the barrel nut.
>>29368387
literally any mlok rail
guys, I'm installing my first gas block / barrel tomorrow. How worried should I be?
>>29368434
Don't be like me and actually buy a fucking block for your vise. Or else you'll fuck a receiver up and be stupid enough to take it to some big fat guy who says "We'll get err done for ya"
>>29368434
Watch a YouTube video m8. If you fuck up you are stoopid
aesthetic rifles apply within
>>29368457
>actually buy a fucking block for your vise
already got it
>>29368466
been watching them for like the past month
>>29368478
Good luck then m80. It's really not that hard
>>29368457
>Or else you'll fuck a receiver up
how did you fuck it up?
>>29368467
You should get some rail covers
>>29368065
ha that's funny i didnt even notice the lines like that before. thanks for pointing that out. that is actually pretty cool
i just used the krylon camo spray paint u can get at home depot and cut out some shapes from an old pizza box for the paint job. it definitely doesnt hold up that well, but i like the flaking paint job look on an AR
If I start tripfagging and show off cute pictures of myself with my raifu will I become /k/ famous? I heard this was the thread to ask in...
>>29368506
no reason to get any for the sides IMO. I just have a few Fagpul ones on the top where my light is mounted so the pic rail doesn't tear the shit out of my hand
>>29368522
No kys faggot. Your gun is shit
>>29368498
I torqued it down too hard between blocks of wood in a vice. Which twisted the receiver and cracked it.
It was a $50 upper receiver from Anderson, I was upset with myself for being bad. But it was the only part that I fucked up with my initial install, pretty good percentage rating compared to all the other bad luck I have.
>>29368522
>pink tutu
>Cali flag
Seem legit.
>>29368296
melonite is supposed to be a pretty good coating right?
>>29368522
At least wait for day/k/are to be over.
>>29368522
I hope you get b& like the other tranny fucks that shit up threads
>>29368532
But everyone ITT is a flaming faggot. I though you guys would like me if I attention whored enough
>>29368580
when will the le everyone is fag meme die. fuck off all you fags do is shit up threads
so for my first ar build, I got pretty much everything I wanted except the barrel I got is SS and I wanted it to be black. What can I do?
>>29368607
Get some high heat spray paint and paint it
>>29368555
Yeah, its a bit more corrosion resistant than parkerizing and its smoother/easier to clean
>>29368107
hey, i had a great idea, next thread should start at 280
>>29368864
Why stop there? We could just make a new thread right now.
Can someone recommend decent priced complete forged lower receivers for around 200$ - 250$?
>>29368387
They didn't fuck it up because the barrel nut is dirty, they ducked it up because they're incompetent retards.
>>29368963
psa?
>>29368522
Post yourself in the tutu with raifu
Would a trijicon tripower be a good sight for an ar?
Iv read up on it and besides the dim tritium and short battery life it seems like a nice sight to fuck around with.
>>29369046
Any others? I checked and they are sold out of the decent priced ones..
>>29368864
How about we stop letting gaylords like pb make threads?
Why can't calico do it anymore? Or have one designated person so shit doesn't get fucked anymore
>>29369121
aero
>>29369127
pb didn't even make this thread. He normally waits til 305 which is still gay. Stay banned retard
>>29368963
serious question: why does it have to be complete? "Building" a lower is easy as fuck.
>>29369151
I wasn't just referring to this one exact thread you gnome.
>>29369200
Maybe kys? You are worse than cg
Best pistol to go along with an AR-15?
>inb4 ar pistol
>>29369288
USP .45 tactical
>>29369192
Shit is more expensive. Decent triggers I've seen go for around 150+
>>29369288
German SIG P226 high vis sights, with a short reach trigger and SRT kit.
>My AR's new buddy
>>29369288
See >>29369333 or pic related.
Any other answers are incorrect
>>29369288
USP
>>29369357
See >>29369345 and >>29369293 for why you're wrong.
>>29369288
Depends on your AR. We talking KAC, DD, or PSA?
>>29369398
I like this tiered idea
>PTAC
HI Point
>DPMS
Sigma
>PSA
Police trade in Glock or M&P
>?
>>29369288
I like my Sig quite a bit, but that isn't a very good question.
it's monsoon season in michigan
>>29369374
Nah
>>29369312
>Shit is more expensive.
serious question #2: are you retarded?
>>29369461
Nothin like a little rain
>>29369517
>little
literally been pouring all day
If you had 2300 to spend on an ar build what would you guys rock? optics included
>>29369540
save money by getting mill spec lower and parts kit then get a nice barrel and hand guard
>>29369540
The cheapest one I could so the rest of the most ey can go into my Mateba fund.
>>29369534
How much are you going to get? Curious what it's like compared to wa
>>29369540
Rainier matched upper/lower
PSA premium lower build kit because it is actually in stock often enough
Lantac Dragon if you want a comp and no can, surefire or silencerco if you want a comp and a can
Silencerco Trifecta if you want a flash hider instead
Cryptic BCG
Geissele MK8 rail
Geissele trigger, SSA-E or SD-E for me
TA11 ACOG or TA31 ACOG
>>29369127
How about you stop ban evading?
>>29369288
AK pistol
>>29369695
Not a bad build idea, but I'd consider different rails honestly, either the DD Slim or KMR-A.
I come from nofunz country and can only choose between the following AR models
>Colt AR-15 H-bar
>Bushmaster mod. XM15
>Olympic Arms AR-15 H-bar
>Oberland Arms (OA) 15
>Armalite M 15
>STAG 15
>Smith & Wesson M&P-15
Are there any significant differences in these?
Which one would you recommend me?
Also, is it better to get one with detachable carry handle and Picatinny rail, or is fixed carry handle good enough and I can just buy a different upper if ever?
>>29369867
h-bar
>>29369867
get detachable imo, you will want optics and carry handle ones look gay
>>29368296
How much do you like your 3X? I would have ordered one if they offered an ADM combo with it.
>>29369461
ur a fucn liar
its winter
again
>>29369867
detachable definitely
what country you in?
>>29369288
Ruger super redhawk in 44 mag.
>>29369288
Beretta 92FS.
The civilian M9 pairs with the civilian M16/M4, it only makes sense.
Could use some help folks. Order myself a custom built upper and it arrive today. The thing is it has no forge marks.
Actually, aside from the T-marks between the rails, it has absolutely no markings or stamps in the metal at all. Any idea who made it or how I can tell?
The builder claimed they mainly use Anderson or Aero Precision uppers in their builds.
It may be worth noting the lower I built myself is a Spikes Tactical and it also has no forge marks.
>>29369796
>anon again provides 0 evidence to support his wild claim
Wow so surprised
>>29370035
this tbqhwyfam
>>29369897
Which of them?
>>29369913
>>29369967
But I like how it looks with carry handle ;_;
Norgay by the way
I will use it for practical sport shooting
>>29370067
nigger, this isnt a court of law. why are you trying to pretend it is? and regardless if it isnt the real one, the trip GC has a blanket ban by the mods
Everyone behold the greatest meme trigger
Presented by autistic red necks
http://youtu.be/PYThNUVZrYM
do I keep the afg?
>>29370208
Is that an aimpoint, and was that AR on fire?
>>29370217
Do you like it?
Do you use it?
Is it comfortable for you?
If you answered yes to any of those questions, then sure.
>>29370113
they look good now but youll regret it later when you eventually want to upgrade.
>>29370217
is it useful? then yes
>>29370217
Do you like it?
>if yes
keep it on
>if no
remove it
>>29370182
False
Family photo
>>29370318
you shoot 3 gun?
Reposting
>>29367105
Sure. So... Tell me what's your barrel?
-plain cmv?
-nitrided?
-cl?
Nevermind i will just say the life of each.
Cmv=7k
Nitrided=26k
Cl=33k
>>29370357
thread was reaching death as I posted this
how's it look?
>>29370356
Yeah, trying to pick up a sponsorship to upgrade my gear but I usually place top 5 when I shoot
>>29370356
I've been thinking about getting back into some 3 gun. Might grab a nice 1-6x and convert the mk12 clone into a very accurate 3 gun rifle.
>>29370528
It's fun man, money hole but I enjoy it. Got into it with some army buddies and just started competing in the league a few months ago
>>29370560
Yeah it's always been pretty fun, I just had trouble staying on top of it with my schedule. Would show up for maybe 1/10 of the shoots because busy and workaholic. The little local circuit I was on started getting heavy on indoor "tactical" range matches too, which was always kind of gay as the range was limited and space tight.
>>29370611
That kinda defeats the purpose IMO. It doesn't take a lot of skill to hit targets 3m away
>>29370641
I mean 25-50 yd still provides some decent shooting if they get creative with the layout, but yeah, nothing like the outdoor having to transition 15 yd to 200 or 300 yd.
>>29370225
yes and yes
>>29370066
this list might help
don't know if this is your first gun, but depending on the forge the brand could be in a different place than above forward assist/around the trigger guard
A (splintered) = Anchor Harvey Aluminum
AF = Alcoa Forge
C AF = Colt Alco Forge
C MB = Colt / Mueller Brass
Cardinal (stylized) = Cardinal Forge
CH = Colt Harvey Aluminum
CK = Colt / Kaiser Aluminum
Circle/Crooshairs w/"AR" = ArmaLite
CM = Colt / Martin Marietta
D (stylized) = Diemaco
DK = Diemaco / Kaiser Aluminum
E = Emco
EK = EMCO/Kaiser
E MB = EMCO/Mueller Brass
F keyhole = FNMI / Cerro Forge
FA = FNMI / Anchor Harvey
FK = FNMI / Kaiser Aluminum
FM = FN/Martin Marietta
FMB = FNMI / Mueller Brass
Keyhole = Cerro Forge
L = Lewis Machine & Tool
LK = LAR / Kaiser Aluminum
LM = LAR / Martin Marietta
M (under diamond) = Mueller Industries
PA = Capco / Anchor Harvey
PM = Capco / Martin Marietta
http://www.m4carbine.net/showthread.php?5357-Forge-markings-on-Uppers
MD-ADS came in.
I love it, and I'm not sure why I didn't get a red dot before now.
>>29370713
Neat, both my uppers are Cerro Forge.
>>29370734
>>29370705
last match I was at there was a pistol steel you had to put your right foot on the boundary marker, grab the wall with your right hand, and lean all the way left with the handgun in your left hand just to get a shot at the target. most people didn't even go for it.
>>29370786
>no 3 gun matches near me
Feels bad
>>29370779
Yeah I bet you feel silly.
>>29370779
My two anderson lowers are cerro, as well as the radical upper. There's no way my receivers were a match set, but Cerro on Cerro seems very tight. Curious what other combos are/n't
>>29370781
nice but...what's going on here?
>>29370833
bong straight pull rifle.
>>29370786
Yeah man, see a lot of that type of stuff on the indoor runs. Surprised people just skipped it, those are some of the most fun. Last 2 I went to were filled up with fatties though, I could have taken chick time to get shots off and placed high because you were gaining 2 and 3 seconds between obstacles alone while tubby folks just wobbled and hobbled their way to the next station. No fun.
>>29370848
most of them are fat and old sadly.
>>29370843
Oh...I'm sorry
>>29370833
Where should the forge marking be on the lower?
I can't find anything other than the usual markings.
>>29370904
I think it depends but that's the location on my cerro/anderson
>>29370901
ehh it scratches my itch, along with the rest of these.
>>29370950
Are both of those straight pull?
Also, how difficult is it to buy parts? Is it like the US where the lower is the actual firearm, and other stuff is easy to buy?
>>29370950
They let you have an assault sniper?!
>>29370950
helluva lot more than most people in your country, and even some in mine. keep up the good fight bongbro
>>29370963
both ar's are straight pull, the benelli is obviously semi, waiting for my extension for it.
strangely i think the upper is considered the firearm. barrels are regulated and a few other parts like bolt but other than that, most things are easily brought.
Nogunz with stupid question. no bully
Is it true that both the Bushmaster ACR and FN SCAR's lower is heavily based on the AR's lower? Or are they pretty much just a recolored AR lower, and an AR lower can fit either of the uppers?
They share striking resemblance.
>>29371034
They are designed to offer the controls in the same locations so that it is easy to transition from one rifle to the other. After that they take the same magazine. I forget if the SCAR takes AR grips or not.
whats goin on in this thread
>>29368522
Tripfags must hang
>>29371084
mad cause you cant find a dank trip like mine
>>29371034
> and an AR lower can fit either of the uppers?
No.
They're similar, but totally not interchangeable.
>>29370927
Hm
I can't find anything on my seekins sp15 lower, and of course there's nothing on the Royal Arms lower since it's billet.
>>29371066
Just talkin' bout 3 gun and fatties. Mostly fatties.
>>29371124
well the ranier is definitely a cerro but...nothing visible on the lower.
Maybe look underneath the triggerguard?
>>29368506
what are those rail covers i need them
>>29371158
Noveske
>>29370713
That's the thing, like I said, apart from the T-marks the upper receiver has NO other marks or stamps in it at all. It is totally blank.
No forge marks.
That said, is there any other way to determine the forge and whatever company did the machining?
>>29371152
That lower is the Royal arms lower, it's billet.
Also all the info and S/N is down there senpai.
The SP15 lower is on my pistol, but unless the force mark is under the trigger guard/ grip/ endplate it doesn't exist.
>>29371208
Was gonna say it looked 3d af. That's what I thought - it might actually be covered once assembled
>>29371191
I would not be able to speak on that with any authority bro sorry
But see above
>markings might be covered by furniture once assembled
R8, Suggest changes, and Quick question.
Would there be any noticeable benefit from me swapping my PSA bolt out with a BCM? My PSA is HPT and MPI and made of Carpenter 158 steel.
Not pictured: PA 1-6x in an ADM QD recon mount
>>29371351
Ultra dynamic angled shot of the other side.
>>29371351
>Would there be any noticeable benefit from me swapping my PSA bolt out with a BCM?
Not unless your PSA BCG doesn't work.
>>29371351
Nah, unless you're having issues with your PSA bolt I'd call it good.
Only suggestion I'd make is a different rail. The Gen 2 MI rails have a lousy mounting method and are kind of weak in general.
I'd suggest something like the Geissele Mk8, if you absolutely need to upgrade something.
>>29371351
mount ur front sling mount closer towards your magazine well. you will notice it being a lot easier to shoulder the rifle
>>29369940
I just got back from sighting it in
Took it out as soon as I got my ADM from Amazon today.
Great optic, pretty much a 9.5/10 in its price tier. Almost wishing I went with the 5x but I'm happy, the reticle is awesome.
how do i get spray paint OFF an AR?
>>29371480
Paint thinner
>>29371480
Acetone, probably.
>>29371124
My Rainier A4 upper doesn't have a single marking on it. Funky.
>>29371480
Aircraft remover. Keep it off plastic parts.
To whoever it was that told me I'd like Saya more as the show goes on, you were right.
Hotaru is still my waifu though.
>>29371297
I'm pretty sure that's it, but I don't care enough to check.
>>29371555
Seems that forge marking are hit or miss.
>>29371480
klean strip
>>29371425
I actually did that right after taking that picture and left it that way. I usually keep it up that far if I'm on the farm so I can just tote it over my shoulder, but when actually shooting I just move the QD button back above the mag well.
>>29371393
>>29371395
Well thanks for that. For whatever reason someone told me I should get a BCM bolt, but I didn't see any real benefit to it if the PSA was up to spec. And so far, I really like the SSKMR, but if I ever upgrade, I'll keep the geiselle in mind. The only upgrade I've been tossing around is a new trigger group. I'm mostly leaning towards geiselle on that, but I'm open to suggestions.
>>29371456
I'm debating picking one up so I don't spend $1200 on an optic, because I really don't think I should right now. I'm debating.
>>29372090
pretty much a steal then at 260
+70 for a QDM from American Defense or you can just use the one it comes with and loctite the fucker down
If you're happy with the PA RD advanced then you'll like this
>>29372187
How is the brightness on the reticle? Did you have any trouble with it washing out or was it always bright enough? I assume as long as it's bright enough you can pick it up pretty easily with the horse shoe style reticle.
Why is this thread so slow? Did somebody get banned?
>>29372234
y does it have to be fast
>>29370376
keep shooting
>>29372223
well these amps go to 11
sits good at a 2-3 for night, 4-6 for low light and 8-9 for daytime
11 is bright as hell and don't know of any practical use for it. The Horseshoe is ridiculously good for sight acquisition even if the light is off.
>>29372283
Thanks for all the information.
I'm probably going to pick one up once they are in stock again then. I would like to pick up an ACOG or ELCAN, but I don't have the coin for it at this moment.
>>29368607
Engine enamel or Cerakote.
>>29369091
Yeah theyre breddy gud.
>>29372234
quality not quantity.
>>29369288
>9 replies
>PLR in none of them
PLR
>>29372267
goddamn captcha
>>29369288
P99(c)
Which would be more practical in use for a first time AR buyer, a handguard vertical grip or a bipod?
>>29372247
It doesn't have to be, but this is a big change from the norm.
>>29372312
It's been a long time since we've had consistently quality threads, I like this.
>>29372365
Would you,
A. Shoot more off hand?
>Vertical grip
B. Shoot more prone?
>Bipod
>>29368607
Alumahyde is pretty neat stuff, but I'm not sure if it''s heat rated.
Cerakote is probably your best option, but Hig heat paint (engine bay/BBQ) would work fairly well
>>29372234
Mom won't let me shitpost
I'm getting parts together for an AR, but I can't decide against a full size rifle or a 10.5 pistol w/ shockwave brace (eventually SBR). I've owned several 16" ARs and love target shooting. But, the 10.5 would be better suited as a home defense weapon and would be awesome.
Are 10.5 AR pistols just meme guns or are they worth it? Full size or nah? Accuracy?
Pic related
>muh lower and LPK
>>29372297
AIMsurplus and Opticsplanet have them if you don't feel like waiting
but yeah you should sleep on it
>>29372420
I currently don't have the money for it.
Well I do have the money, but I also need to buy a car, so I should hold off.
Is there supposed to be a little wobble in a T-1's rheostat? The brightness settings work just fine, but I'm wondering if some play is normal.
>>29372391
I like my 10.5" a lot! But I built it after my 16"
To me the 16" took priority.
>>29372449
I know that feeling.
>pretty ok savings account
>have to constantly resist the urge to dip into it for goodies
>>29372471
I'm afraid that after I shoot my pistol I'm going to like it more than my rifle.
>>29372312
nice bc
>>29372498
>have enough to put an ELCAN on a SCAR
>really need a car
>fug
Maybe someday.
>>29372530
Get a dual sport bike and an elcan
>>29372515
Nice job paying for some overpriced junk
>trying to resist the urge to by one myself since im trying to save money...
>>29372598
>overpriced junk
lmao
>>29372605
Im just trying to tell myself i dont need it.
>>29372614
>i dont need it
life is no fun if you live by this
>>29372621
Life is no fun if you're a raging faggot either.
Why have threads been so slow recently?
>>29372574
I'm looking to spend about $3500 on the car, so I'll probably send off my 74 parts kit to Spivey once I have the car because then I'll be getting a job.
Currently hate my life. As you can probably guess. At least I have wacky bats on Saturday.
>>29372598
you jelly
>>29372605
he jelly
>>29372621
Yeah, but im saving up for a suppressor since my state is going to legalizethem in the next few days.
>>29372635
it happens all the time
you would know that if you werent a flaming newfag
>>29372635
>>29372658
got heem
>>29372655
nice, what state?
>>29372658
>been here longer than pb
>newfag
O k
>>29372690
>>been here longer than pb
>>29372498
I used cheaper parts on my pistol for the most part so the rifle still is "nicer".
Have you decided on a CH yet?
What all is still missing?
>>29372655
Are suppressors regulated under the NFA?
They need to repeal that shit.
>>29372690
>>>been faggit long time
Black or Tan ATPIAL-C?
>>29372710
trump will make /arg/ great again
>>29372670
Iowa
Just waiting for the Governor to sign the damn bill, which he said he will sign.
After all that ill get a cryptic bcg while i wat for the stamp.
>>29372690
Did your tripcode get banned again?
>>29372636
Live for the wacky bats until it gets better man.
And the shooty gats.
I'm doing wacky bats the first two weekends of next month, haven't since...november?
I'm excited.
>>29372705
It just needs it's own BCG/CH, since it's borrowing from my rifle at the moment.
Going to get a Griffin QPQ BCG, not 100% on the charging handle, but I'm thinking about the SN-ACH small latch.
Also yes, suppressors are NFA, it's stupid.
>>29372762
You're out in Colorado, right? I actually may know who you're going out to swing sticks with.
>>29372745
nice, congrats senpai
>>29372733
https://www.donaldjtrump.com/positions
https://berniesanders.com/issues/
Nick! dahnhaes is talking shit on Primary Arms micro dots, get in here and ban him!
>>29372802
>berniesanders
>anti gun
no thank you commie bastard
>>29372802
>>29372802
don't tell me you support bernie
Any of you guys ever build a bump fire SAW? I saw some on arfcom and I'm pretty turned on desu.
>>29372839
>railed gas block
>>29372839
>railed gb
d r o p p e d
>>29372839
>>29372854
Girls are so dumb.
>>29372774
I'm actually in Georgia, quite a bit away from CO.
Playing here the first weekend:
http://ruleof3.net/dtd/
And the second weekend I'm doing a different game run by the same people that's sci-fi fantasy instead of all fantasy.
>>29372829
I kinda liked him until he proved to me that he doesn't like guns.
Then he was
D R O P P E D
R
O
P
P
E
D
I'm a fedora wearing faggot and I'm trying to build a retro Ar-15/ M-16a1 clone. I would like one with the tear drop forward assist. Could anyone give me a heads up on where to get parts? Also I've been looking at Fulton armory and they have "retro" uppers for $800. I'm hoping to build one for cheaper but this may be my only option.
>>29372820
>>29372824
>>29372829
No I don't completely support any of the candidates. I just wanted to share the issue/positions pages up Bernie and Trump because I'm not sure he's read them yet.
>>29372872
You going to make it to any events in PA? Because I'll find you.
IN! Hk translucent ma passed drop test with flying color.
>>29370376
The bottom one look perfect but the top one need lil more rounding.
>>29372894
Pennsylvania?
Probably not, but it's not impossible.
Are there any particular ones I should go to?
I've got skymile type points and if there's a cheap flight I may as well if I can, why not?
>>29372905
cool.
>>29372917
The big ones I would recommend in PA are Gates of Fire in April, Rag in June. I can't make it to Rag this year because of my Reserves schedule, and Badon Hill in September.
We also try to make it down to Winter War, which is a lot closer to your locale I think.
All the other events I'm looking at on my units list are either Ohio or Indianna.
Oh, and Seige of Azure Castle is a new event, but it's at a paintball park with a castle and village and shit, so it's looking super promising. It is also in April.
I need a big boy light.
Is http://www.amazon.com/gp/aw/d/B009F7J960/ref=mp_s_a_1_1?qid=1458871496&sr=8-1&pi=SX200_QL40&keywords=surefire+flashlights&dpPl=1&dpID=31%2BV-YasJxL&ref=plSrch any good?
>>29373061
just get some stolen valor off ebay.
I will repost hk translucent mag test documenting photos in next thread.
>>29372905
>>29372917
Yea.
The test consists of dropping hk mag fresh out of freezer three time on its feed lip from 4 feet and thats actually always lick more than 4 feet because i had hold steel tape measure to extremely rough concrete i hold the lowest point of magazine above 4 feet by inch to account possible angle error. Unlike another tester i saw they hold highest point of mag at measurement this is wrong.
So. The frozen hk mag survived drop from 4 feet high fully loaded with fed val pak 55gr fmj slamming its feeding lips into ground three time fast as i could take few photo after each drop.
Then i went on to 6 feet drop for three time. The mag was not fully warm/thraw before this 6 feet drop test it isnt frozen but cold.
Throughout those testing if it spit out round i documented it and then reload the mag to full capacity for next drop. Throughout the test the mag only spit out maximum amount of two rounds and sometime only one and few time no round was spit out.
For next document photo dump the file name will say which test it is whenever its 4ft frozen drop or cold 6ft drop.
The file name will include number after word "drop" which say the number of drop photo is documenting. The lower case roman numeral is the number of photo after the drop.
The visible round outside of the magazine is very round that mag spit out if theres only one meaning for the drop mag only spit out that amount.
>>29373061
I'd recommend a primary arms light if you don't wanna bust the 75-100 dollar line. I haven't broken mine yet so it's pretty tough
so I got a new bcg from pca, when I oil it it develops some crude on it. It's like when you're sweaty and you rub your skin you get that gross dead skin rubbing off. Is this just some coating coming off or what?
>>29368153
Bruh how did you do the swede camo?
>tfw
>your ban finally expires
>>29373256
Was some butthurt fag reporting you to get you banned?
>>29373241
This pattern was the base
>>29373256
Whacha get banned for?
>>29373269
i think so, its alright i needed to actually go to bed for a few nights before 1:30
>>29373281
There is always that.
>>29373061
http://www.amazon.com/Surefire-Tactical-Single-Output-Flashlight/dp/B009F7J8MA?ie=UTF8&psc=1&redirect=true&ref_=ox_sc_sfl_title_45&smid=A30DGGRQPDAP9Y
this is what use, if its for defensive use it should be a single out put only
>>29373140
degrease it if you haven't already
>>29373275
i posted a pic a few days ago of a censored version of one of the comics that a anon was posting last week and i guess the mods weren't ok with it
>>29373336
>degrease it if you haven't already
what should I use?
>>29373336
>banned
fuggin good
>>29373350
simple green works good
>>29373357
love u 2 ;)
>>29373336
I once got banned for a few days posting mild lewds on /v/.
>>29373393
ya lesson learned
>>29373384
>cuts through barrel, slide and frame with ease
>spring survives
lelwut
>>29373393
I got banned for posting trap butt.
But it was almost fully clothed trap butt, more clothed than some girls that were being posted here at the same time.
I've also been banned for posting in a roll thread.
i got a ban for posting lewd nge dojinshi
she's all done
r8&h8
>>29373428
i think it was the rest of the spring coming out after the tension was released
>>29373455
baby's first/10
>>29373470
Didn't consider that, and it looks like it is cut mid-coil so I think you're right.
>>29373455
Probablyworkswell/10
>>29370528
You going to get one of those TNVC blem tubes or what fgt?
>>29370528
>>29370611
>>29373634
Also, I just got accepted to the Quantico shooting club, so we should go sometime.
>>29368107
WE BOLTER SOON
Also, holy shit this lower rocks.
>local company
>very good QC, regionally famous
>45/60/90* selector compatible
>setscrews for all parts, no coil/roll pins, just like the high end LR308 lowers
>not-dogshit rollmark, S/N and company info in very very small text on other side
>$89
Will be buying more.
Also also, to the anon that bought the Vortex 30mm cantilever off me, I shipped it today. Should have a tracking number in your paypal.
Final drop
>>29373662
Take better pictures, I'd like to see it
>>29373662
who makes it?
MOA?
MOA Who?
>>29373687
MOA Tactical makes it. This is their forged lower, they call it milspec+.
They also do a pretty gucci billet lower for $179.
The upper is also MOA Tactical, and is straight milspec. I got a badly blemished one for $19.97. Some chucklefuck new guy that they hired to assemble stripped uppers forewent vise jaw padding so there's some significant dings in the anodizing and the roll pin for the forward assist needs to be driven out and reset. It came as a complete/partially assembled one they were trying to get rid of.
They're local to Arnold, MO. It's a small company, the owner teaches at the state police academy and has done a couple pro tem gigs out at Gunsite, he's our local SOT.
>>29373680
Working on it. My office is dark AF, getting some better lighting set up in my gun room.
>>29373723
Cool m80
I feel dumb for thinking the SN-ACH was $20.
The short latches are $20, the SN-ACH itself is $85.
Probably going to get a Strike Industries ARCH with an extended latch.
>>29373723
Neato, their rollmark isn't too bad on the forged lower.
And that billet lower looks pretty good too.
>>29373723
>parts list
MOA Tactical forged lower
MOA Tactical forged upper, blemished
MOA Tactical upper parts kit
BCM pistol buffer tube kit, complete (pistol tube, standard carbine spring, standard carbine buffer, QD endplate, normal castle nut
AXTS Raptor charging handle
ARMS SIR #46 handguard
Green Mountain 4140CMV barrel blank stub that might maybe eek out an 8" barrel but probably a 7.5"
I have a milspec LPK from Black Rain around somewhere, would just need a barrel nut, barrel extension, and sights. Will probably also throw a KAK flashcan on it to give a bigger perceived muzzle diameter, especially if I can inset part of it under the rail.
>>29373723
Link to there stuff? I can't find them. Thanks.
What are your plans for your build?
hey is a detachable carry handle from BCM and a stock A2 forward sight frowned upon by u guys or is the /k/ approved?
>>29373825
Closeup of lower, showing the bolt release screw.
The lower uses screws instead of coil pins for the bolt catch, takedown pin, hinge pin, and selector detent/spring (requires clipping a couple coils off a normal spring). Also has a tension screw for upper fitment but I don't particularly care for those. They're better than an Accu-Wedge, but still not as good as getting a good fit out the gate.
>>29373829
Not sure they have a website, sold through a local tacticool shop. Lemme see if I have one of their business cards.
>>29373837
it's neat.. just know that you're cutting your rifles performance short
>>29373829
synergydefence.com.
They're listing the MOA forged for $95 currently, it's $89 in store.
Also here's the billet.
>https://synergydefence.com/index.php?route=product/product&path=94_90&product_id=889
Build plans are for a fuckaround gun in .300blk because I already have a barrel stub from the last barrel I turned and a handguard that sucks on a rifle but would be p. neat on a pistol, so I'm in this gun for a little over $300.
>>29373863
well i figured i would keep it on the 3 o'clock part of my rail and use my PA micro, and if/when it shits i can switch to the carry handle
>at least mine isn't perm attached to my upper
>>29373837
Approved from me. Those are ruggized like fuck but be aware you shooting speed and efficiency will be reduced.
>>29373908
see
>>29373904
any recommendations on a good place to get a front sight? my AR had a railed gas block on it when i got it
>was gift AR
>>29373908
Question:
I know you are deaf.
Is your internal monologue in ASL? Like, do you picture a hand making signs as you think?
Or do you picture written words?
>>29373927
A2?
I can send you one for the cost of a bubble mailer, if you'd like.
>>29373937
yes please daddy
>>29373903
Also I got a pretty neat sticker with it, as well as a fuckload of Magpul stickers they were trying to get rid of.
>might drive around the mall tomorrow and stick them on the windshields of riceburners
>>29373951
Aight. Email me. [email protected].
Also if you need any other misc. small parts lemme know, I've got a spare-parts bin that's overflowing.
>>29373978
sent
>>29372905
thank you for the input
going thru your drop test pics now - thanks for sacrificing an hk mag for the /k/ube
>>29373962
>might drive around the mall tomorrow and stick them on the windshields of
riceburners
Holy shit yes
>>29374017
I would consider relocating that light so that you can more easily shoot from a rest or sand bag.
I don't like having anything on the 6 oclock on my handguard (except a grip)
Whats a good inexpensive rail to throw on a rifle with a 16" carbine gas system that looks good?
>>29373130
Ooooh myyy
>pic related
>>29373241
Lots of time and tape. And a bit of spray paint.
>>29374080
Monstrum :^)
>>29373861
Neat. but im not fan. For me, it introduce new worry for it be able to unscrew and call for locite. Especially for it is in use to secure the thing which will repeative rotate in same direction the screw would. Fuck that shit to hell.
*sweating intensifies
I would lose sleep over that shit.
I prefer roll pin for im very comfort with installing and removing them.
>>29373928
Very few ask that question. only smart one do.
Answer's never never never signing its always in english text or me speaking. A lot time i would say perfect english sentences but when type often i speak in my mind as i type and often mind's voice's waaay faster and when typing i would fail to type thing like is,the,of,etc. for I simply forget to type that word and i wouldnt notice unless i proof read it or write slow.
Oh and i have asked that question to another deaf people and bilingual (only the one thats bilingual since kid often spanish/english)
Some deaf people do think in sign some say neither just the thought.
Aaaand 4chan doesnt call for typing slow for proper english or proof reading.
Good question, got any more?
>>29374080
I like Seekins and Aero. Both fit pretty much everyone's suppressors (1.75-1.8" ID) and are comfy, both come in both shelfmod and patentlok, and both are around $150 new.
If you want a ~10-11" one Cordan (I think) has a 10.5" Seekins MCSR v2 for $135 shipped. It's a little short IMO for a 16" rifle but it's a damn good handguard.
>>29374107
Literally none of those rotate the same direction as the screw, and half of them don't rotate period. Also the selector detent and takedown detent screws are captured by the grip and endplate, respectively.
Also, DPMS has been doing it for 20+ years on their LR308's and G2's and not once have I heard of one backing out. It's seriously a superior design.
>>29373927
To replace the gas block or to mount atop it?
For fsb to be pinned you would need to drill through secured fsb on barrel (barrel too). With tapered drill bit then pin it.
Or get one that have set screw.
I recommend JP FSB with adjustable gas capability.
>>29370611
what cases are those?
>>29374098
Not really into the quad rail...
>>29374118
I like aero, i have their 15" keymod on my 18" upper.
Im just looking for something to throw on a spare upper and barrel in the near future for a fuck around gun with no purpose.
>>29374170
it had a stock S&W a2 on it before the previous owner took it off, i just wanna undo that mistake
290, time for a new thread
>>29374204
What happened to quality? >:(
>>29374184
if you want to go budget, i like ALG. very solid slim rail for around $100
>>29374184
I like my matrix arms rail aside from the lack of indexing tabs.
They make other styles too if you don't like the one I've got.
>>29374204
kek
>>29374198
Unless you have the very fsb he took off you would need redrill for pinning another fsb on because every one is drilled and pinned differently.
The hole wont line up otherwise.
Sorry.
>>29374158
For me. for me.
It raise those concerns.
>>29374207
i'm teasing cz-goy
>>29373928
10/10
Fucking kek
>>29374107
ASL speakers confirmed for faster cognitive function and internal dialogue.
>>29373861
Good looking roll mark, except for the LLC
Does it work with a standard mil spec LPK?
Alright guys, after careful consideration of my intentions:
>punching paper
>remove acorn
>putting the fear of kek into bears/raccoons/opossums going through my garbage
>taking potshots at shady looking trespassing teenagers
>cuddling with
>looking badass, heavy, and tacticool for muh oper8n racial purging wet dreams
>scaring off dindu home invaders, or clubbing them to death
>basically all semi auto rifles are now illegal to purchase in my state
I have decided that I'm looking for an air rifle/pellet gun thing, not like plastic airshitter junk, like spits actual chunks of metal with 1MOA accuracy, and it would be cool if it resembled an AR, which are now fucking illegal thanks Dannel
Can someone point me in the right direction?
>>29374017
The mag's still perfecrly operational.
/k/ appreciated my gesture and sent angel to inform me that /k/ube will allow me to keep my mag.
The angel was john moses browning.
>>29374088
yeaaaa buddy. be careful primary arms likes to fuck up and send you extra stuff. I only ordered on light but they sent two
>>29374107
What's the situation with ear protection when you're deaf?
I imagine it's still important because ears are delicate even if you can't hear.
Also, can deaf folk get tinnitus?
>>29374283
Yeah, works with a milspec lower parts kit. About the only difference is I'll have to clip a couple coils off the takedown detent spring to make room for the setscrew.
The rollmark is growing on me. About the only way it could get any better is if it didn't have one (might special order one from them that's lacking it).
I'm debating on keeping this a barebones build with the USGI parts I have on hand or spring for a BAD 45* selector. Honestly the lower's so fucking nice I'll probably end up Form 1'ing it in the not too distant future, they are fucking excellent. Fit/finish is superb, features are gucci, price is insanely low.
>just looked at the receipt
>only charged me $77.45 for it
>it was marked $89.00
>no idea why
>>29374284
AirForce Texan
https://www.youtube.com/watch?v=Tdvsv6cRacU
It won't just remove acorn, it will turn acorns into mist.
>>29374293
rude
>>29368522
Depends, are you actually cute?
>>29374255
no worries, its the guy im paying problem
Which one?
>>29374321
You got it right.
Yeah deaf people can get tinnitus.
Keep in mind. Deaf isnt really "deaf". Im "profoundly deaf".
I can hear but the sound has to be above 90db for left ear and 110db for right ear. Talking is like 20-30db if i remember rite.
The gunshot at least some of themnis actually painful and unpleasant just same as it would be to hearing people.
9mm out of semiauto's fine to my ear 5.56 with birdcage or prong (directly behind the shooter)'s perfectly fine.
But anything more its painful and risking tinnitus.
I would probably turn into madman if i have tinnitus.
>>29374345
I can't find them on the website you linked. Please link a product page friend. I am interested in them.
Also Space Marines are lame. IG all the way.
>>29374379
Aha.
>>29374293
God forbid. But im diggin the light. Going to pull the trigger on it tomorrow.
>>29374380
Personal opinion is the ALG.
>>29374388
https://synergydefence.com/index.php?route=product/product&path=94_90&product_id=890
Said they've got 400 coming back from the anodizer tomorrow, there's 6 in stock now.
Also, I agree but I can't make an AR look like a lasgun.
Chaos Marines are p. cool though.
>>29374380
aero precision m-lok
http://aeroprecisionusa.com/ar15-enhanced-mlok-handguards.html
>>29374386
Interesting.
yeah, I wouldn't recommend tinnitus.
I've got a mild case of it and can hear pretty normally so it's tolerable, but there's a constant ringing all day every day.
>>29374445
Already have a aero.
>>29374380
Megafin's too weak.
Alg emr definitely.
>>29374429
Thanks for the link. Those lowers look pretty nice.
>>29374445
What muzzle device is that?
>>29374495
it's a knock off bulgy 4 piece ak booster
>>29374456
From perfectly dead and peaceful endless silent that would drive hearing people mad to endless ringing.
Wew lad! I love earpro always.
>>29374514
Could you link me please? Does it increase back pressure?
>>29368107
New thread>>29374543
Thread is dead so I'm blogposting, deal with it.
I couldn't resist preordering Nendo Galko-chan, she's so cute!
>>29374520
I'm really glad mine isn't too bad unless I'm in a silent or near silent room, or have something plugging my ears up like headphones.
Also mine isn't from anything fun like guns, I think it's from issues with my jaw or something.
>>29374559
Ever got punched in jaw?
>>29368522
sharpie in pooper