Any BSD fags in here?
Just installed it on my laptop, and it seems to be running slow. I don't know what's wrong, but it could be with the way I installed it. Basically told it to fuck all the partitions I had and use the while disk.
any useful commands I could give to help troubleshoot this problem?=> 40 625142368 ada0 GPT (298G)
40 1024 ada0p1 freebsd-boot (512K)
1064 616561656 ada0p2 freebsd-ufs (294G)
616562720 8388608 ada0p3 freebsd-swap (4.0G)
624951328 191080 - free - (93M)
/dev/ada0
512 # sectorsize
320072933376 # mediasize in bytes (298G)
625142448 # mediasize in sectors
4096 # stripesize
0 # stripeoffset
620181 # Cylinders according to firmware.
16 # Heads according to firmware.
63 # Sectors according to firmware.
528RCN9MT # Disk ident.
Not_Zoned # Zone Mode
I/O command overhead:
time to read 10MB block 0.187293 sec = 0.009 msec/sector
time to read 20480 sectors 1.933846 sec = 0.094 msec/sector
calculated command overhead = 0.085 msec/sector
Seek times:
Full stroke: 250 iter in 6.803965 sec = 27.216 msec
Half stroke: 250 iter in 4.928469 sec = 19.714 msec
Quarter stroke: 500 iter in 8.369630 sec = 16.739 msec
Short forward: 400 iter in 2.339925 sec = 5.850 msec
Short backward: 400 iter in 2.823784 sec = 7.059 msec
Seq outer: 2048 iter in 0.202531 sec = 0.099 msec
Seq inner: 2048 iter in 0.332644 sec = 0.162 msec
Transfer rates:
outside: 102400 kbytes in 1.173601 sec = 87253 kbytes/sec
middle: 102400 kbytes in 1.518762 sec = 67423 kbytes/sec
inside: 102400 kbytes in 2.371640 sec = 43177 kbytes/sec
>>61331351
Is your HDD old? I think the sector size you want is 4k(4096), make sure to use that.
>>61331608
guess it's not?ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA MK3259GSXP GN003J> ATA8-ACS SATA 2.x device
ada0: Serial Number 528RCN9MT
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytescd0 at ahcich2 bus 0 scbus1 target 0 lun 0
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors)
Trying to mount root from ufs:/dev/ada0p2 [rw]...
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA MK3259GSXP GN003J> ATA8-ACS SATA 2.x device
ada0: Serial Number 528RCN9MT
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytescd0 at ahcich2 bus 0 scbus1 target 0 lun 0
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors)
Trying to mount root from ufs:/dev/ada0p2 [rw]...
>>61331925
Might want to reformat with 4k sectors.
>>61331990
yea
my fan and disk are working hard with just a browser open
The problem probably has something to do with drivers, since BSD has none
>>61333507
nah it supports my teledildonics collection just fine
but yeah no GPU or chipset support