How would you fix the hole at the top to make it be able to be

File: image.jpg (120KB, 750x1334px) Image search: [Google]

120KB, 750x1334px

from before if it matters

that looks a though one...

My first idea would be to use an epoxy resin putty. People use it to sculpt.
Would probably put a large lump over the hole mould it into shape then add a new hole before it sets.

https://www.youtube.com/watch?v=yOvoLmUUB-A

>>916280
The easiest fix is to superglue a bit of wire or paperclip across the top. Maybe smooth out the broken edges first. Always clean before you glue.

>>916286
This is the neatest solution, though I have no idea how hard it is to make the shape right. Maybe you can fill the whole gap with epoxy and then re-drill the hole.

>>916280
Epoxy Kit look for Weicon

you could use the epoxy putty to mould a frame for it. I think you can get coloured epoxy so you could make something quite attractive.

You would only need a small bit and then press a bit of pattern into it with a pencil.

>>916305
A mix of these solutions epoxy some bracing over the gap and fill the hole while you're at it. Then drill a new hole.

File: 10X-font-b-Blank-b-font-Acrylic-Rectangle-Keychains-Insert-1-72-x-1-1-Photo.jpg (26KB, 600x611px) Image search: [Google]

26KB, 600x611px

Buy one of these for fifty cents