ok so i know this might be a dumb question but here go's
lets say i have 1 servo that has a torque lift of 1 kg and i want to be
able to lift something that is 2 kg if i had 2 of the same servo would i be able to lift 2 kg
>>1220979
Yes.
>>1220980
sorry if this sounds dumb but how if the same servo can only lift 1 kg of its weight wouldn't it fail and brake
>>1220988
lets say I have two 1lb blocks.
I have servos that can lift 1lb but not two.
I can definitely lift one block at a time.
I can definitely lift two blocks next to each other with two servos.
If I tape (read: weld) the blocks together, nothing has changed. It can still be lifted with 2 servos.
>>1220979
>able to lift something that is 2 kg if i had 2 of the same servo would i be able to lift 2 kg
As long as the load is spread evenly between them, i.e. they are only lifting 1kg each, you should be fine.
only board that answers brainlet questions with some patience. I just assume everyone here is older than 35
>>1221366
>I just assume everyone here is older than 35
I visualize a bunch of laconic 40 year olds who only post when someone seems to have a clue but needs guidance, vs. a shitload of know-it-alls and trolls who are here because girls just want to have fun.
It should do it without a problem as long as the manufacturer is already taking into account a certain margin. Otherwise they will be working on the edge of specs and might suffer too much wear and tear in a short amount of time.
>>1221375
In other words, if you dont abuse them too much you are ok. If you plan to move them exhaustively, maybe its better to find a stronger one. Pure common sense.
Physics wise, the strength on each servo never really exceeds 9.8N, regardless of the angle of the cords (or whatever you are using to lift the weight).
>>1221374
Urinary Tract Infection? Grab a plastic tip off a can of WD-40 and put it on your can of Great Foam. Fill your urethra and stick a toothpick in while leaving a small length protruding to grip later, let it bond with the bacteria, and then pull it out.
Should I paint my grandad's fence? Lacquer or whatever?
>>1221484
>>1220979
That's a pretty fancy fidget spinner you got there OP
>>1221374
>a bunch of laconic 40 year olds
You wouldn't be wrong.
>>1221698
I was waiting for that.