Thinking about doing full rgb led strip lighting for an apartment

Mostly because i wanted to save a little on energy, plus I want to make interesting lighting . From what i was researching, I estimated total costs to be around 300 dollars, but thats a rough estimate.

The costs would be highly dependent on the strips you use. You can get cheap ones for a couple bucks, but quality LED will be a lot more expensive.

File: output_QQzhUp.gif (3MB, 480x270px) Image search: [Google]

3MB, 480x270px

>>1145717

WS2812b are addressable and at ~$40/5 meter strip they're pretty affordable. You'll need at least a 10 amp power supply per 5M strip, and if you want to control it you'll need an Arduino ($5 knockoff) and at least an IR remote.

>>1145805
Share what you've done ws2812b thread?

File: TrumpShrine.gif (2MB, 380x214px) Image search: [Google]

2MB, 380x214px

>>1145820

File: 20161029_204957_LLS.jpg (690KB, 2322x4128px) Image search: [Google]

690KB, 2322x4128px

>>1145820

File: 20170227_202511(1).gif (807KB, 192x108px) Image search: [Google]

807KB, 192x108px

>>1145820

More.

>>1145805
Would I need one arudino per, or if i had say 20 meters of that strip could i hook them all up to the same one? Also, how much light do they put out? was thinking of making hexagon arrays to hang on the ceiling/wall

>>1145960

1 Arduino for as long as you daisy chain it. However, the signal will get weak after a certain length so you need to boost the signal.

Undiffused they can put out quite a bit of light.