Anyone know where i can find steel pipes that fit snug around 1/2 in steel pipe (should be 0.840 inches inner diameter)?
pour molten steel up your butt. that will fit nice and tight around the 1/2 inch pipe. make sure to load the shell first (<.|.|.<)
Don't make a supressor
Different pipes are measured differently 1/2" conduit is ID measured, but black pipe is npt threaded to be 1/2" OD.
Take your pipe to home depot and start testing different shit.
>>1079054
i know nigga, i literally said im looking for specifically 0.84 in inner diameter pipe. Also, it aint a supressor nigga
metal depot. Chances are you'll have to massage it a little with sand paper due to the manufacturing tolerances
or online metals
If i cant find a pipe that fits right, im thinking of just sanding the inside of a 3/4 in pipe, they typically have an inner diameter of .82. What would be the best tool for that do you think?
>>1079043
.080 wall 1" steel tubing will be .840 id.
Jeez, it's like nobody is a fabricator....
>>1079059
.020"? A drill, then a reamer if you need it really close.
>>1079061
"Pipe" is measured by inside diameter.
"Tubing"" is measured by outside diameter.
>aircraftspruce.com
>>1079065
.080 wall is a standard size.
Aircraft spruce has a 1 foot minimum (unless you can get lucky on a remnant).
The .003 is negligible, you won't notice it.
That's literally the thickness of a hair.
Aircraft spruce has that for $5.75 a foot in 4130 chromoly.
http://www.aircraftspruce.com/catalog/mepages/4130tubing_un1.php
>>1079059
adjustable reamer and a tap wrench is the best way if you've got drawn or seamless tube.
unfortunately the straight blades cause it to jam up on the big ugly weld seam of erw.
>>1079064
Dis shit rite here.
Pipe is ID, nominal bore. OD can fluctuate depending what schedule the pipe is, as wall thickness varies.
Tube is OD
>>1079198
>americans try to build firearms
maybe you should just google some better designs, op, you're not "scaring the government" here so maybe even consider just buying a gun from a store
You'd be better off with an %80 lower
>>1079433
this but make sure to use a drill press instead of a mill like an animal you piece of shit
>>1079059
A lathe