Does anybody have any ideas (hopefully cheap) on how I can make

File: _20160615_012451.jpg (897KB, 2340x2926px) Image search: [Google]

897KB, 2340x2926px

Here's the light I have

Really strong glue and some good guage wire. Your not going to be touching it often so this will do fine plus you can bend the wire to hide it as much as possible.

>>1008976
And do what exactly? glue it around the black base, and hang from ceiling?

>>1008977
You can do that, if that is what you want

Or just stand the wire on the ground or glue it to something else

File: Untitled-1.jpg (260KB, 1280x1024px) Image search: [Google]

260KB, 1280x1024px

>>1008977
This is is probably the method that would hide it the best, I mean it's pretty straight forward stuff.

>>1008999
Doesn't seem straight forward to me. So what is holding the light up? A piece of wire isn't going to make it levitate.

>>1009239
...the wire is glued to the light...what is wrong with you? If the light is heavier than glue can hold up then loop the wire around the base once for extra strength. you can clearly see the same sort of thing being done in the OP picture. and if the light is too heavy for a thick gauge wire to hold up then you are using the wrong type of light.

>>1008999
You could also put something behind the base of figure to make it look centered below. Good idea there

File: IMG_20160616_153727.jpg (2MB, 3120x4160px) Image search: [Google]

2MB, 3120x4160px

>>1008959
I used copper pipe for mine with JB weld, then painted over it. Used hot glue for the wire and figure.

>>1009693
Not bad, looks quite nice.