>No one else will do it so no fucking bitching
Old one
>>34668083
Shit thread
>>34671805
eat my penis and look at my poverty
>>34671811
get a better flashlight and you have something decent
>>34671811
how do you like that PA 3x
>>34671811
Hi.
I'm poor too.
>>34671821
That's obvious
>>34671836
If you don't have something nice to say, don't say anything at all. Don't they teach manners anymore?
>>34671818
I like it. It has added some noticeable weight to my rifle when I had a puny red dot but I enjoy the reticle. I am trying to get it zeroed and 100% dead reckoning but wind and lack of targets is bending me over a mini fridge. I think I got it roughly dialed in but it is still a work in progress pending amazon shipments.
>>34671840
good to know , been looking at it
cinder blocks and 2x4s are cheap
>>34671855
But they're too heavy for him.
Anyone have experience with uppers from these distributors ?
tntesales.com ftfindustries.com jsesurplus.com model1sales.com
>>34671861
kek
>>34671855
Private range, so I need something portable. I got some metal do hickies that can slide onto a 2x4 and made an instant steel target fiesta. Need much heavier targets out in the great plains because of gofuckyourself 45mph winds on the regular flip floppy my paper targets all around. That webm you saw was about 30 seconds before that target became an involuntary kite and flew off past the horizon.
>>34671784
>shooting steel case
>>34671870
>failure to feed industries
kek
no, why not just ask where to order stuff from
>>34671885
>gun sounds
Yeah. That is what the rifle makes when it is pissing out cheap steel regularly instead of once a month with expensive loads. We are killing paper, why blow extra on target practice?
>>34671840
Watch that breathing boi
>>34671881
Make a stand with pvc and furring strips.
http://www.guns.com/review/portable-pvc-target-stands-can-life-get-any-easier/
>>34671899
mainly wear and tear m8
I work at a range and I've seen some funny things with steel cased ammo
>>34671898
>failure to feed industries
ha i didnt think if that
pretty much googled the shit til i had those, was looking for a 11.5" complete upper that wasn't $800
>>34671909
Way ahead of you. I made one for zeroing in. I got steel for general fun after I got the more accurate work done. Even filled the bottom with river rock pebbles to keep that son of a whore flat. We are talking winds that can prevent car doors from opening out here. It is misery with standard targets. My stand is 10lbs+ with double brace reinforced furring bracket. Just have to wait a few more days for steel to arrive.
>>34671923
Yea I've been out there.
>>34671921
what do you want on this upper?
>>34671957
>perfect world
Picatinny rail
1/7 or 1/8
A2 front sight or gasblock folding sight
>>34671984
this is a decent deal
http://www.gunbroker.com/item/672163201
does it have to be new?
>>34672018
That is brutty good.
i'd prefer new i shoot a lot when i take my others out.
>>34672038
I'd probably just get that if I were you
It takes a lot of rounds to wear a chrome lined barrel out
plus good barrels are inexpensive nowadays if you were to eventually wear it out after thousands of dollars of ammo
>>34672077
merchant... i... i want a new one merchant... not your cousins
>>34672089
okay then get a BCM
>>34672089
Get sr-15 upper
>>34672089
youre getting a lot more quality with a good used one than a $500 new one
>>34672092
>>34672112
>>34672126
http://www.armslist.com/posts/7099024/houston-texas-rifles-for-sale--colt-ar-15-sp1--223-rem
>>34672145
https://gun.deals/product/psa-16-midlength-556-nato-17-nitride-12-keymod-slant-freedom-upper-w-mbus-sight-set-no-bcg-o?mobile=true
>>34672145
https://www.bearcreekarsenal.com/ua223cm41619-p-shg-784
>>34672163
>>34672170
He wants an 11.5 upper
>>34672178
Then he's retarded for not buying the commando you posted.
>>34672232
Niggas want new stuff for some reason
>>34672241
I can understand that on some things, but shit at 470 unless it's completely shot out (it won't be) then it's a good price.
>>34672254
I agree
BCG and all
>>34672241
>can't afford brand new
>won't buy a good deal cause it's used
Pottery
>>34671784
>>34672621
When will poorfags ever learn?
>>34672996
>wanting someone else to fuck your girl before you do
cuck
>>34673019
It's about getting a better product for the same money as an inferior one
And unlike a girlfriend, it matters none at all if it's been used or not
Used comp m4 or new PRO?
>>34671821
Move the light back.
>>34673049
Used M4
>>34671899
>reloads
>sweaps up brass
>buys surplus pulled
MAXIMUM JEW.
Bushmaster Windham E2S-T 1/9
Spikes Tactical ST-15
I can hit at 500 all day with 62gr FMJBT
Good morning /arg/
I can't decide on what MD I want. Suggestions currently thinking SFMB or Warcomp/Warcop Closed Tine but I don't know. What get?
What's the best barrel length for an all around general purpose rifle? Also, are MROs good for the money?
>>34673236
16" if you don't want to deal with pin and welding your MD, otherwise 14.5"
Also I really like my MRO a lot and think it's nicer than both my H1 and T1.
>>34673235
closed tine warcomp
>>34673235
That h-handguard makes my tummy f-feel all warm
Why not a nice pingy prong MD?
>>34671899
>instead of once a month with expensive loads
If ~30cpr is breaking your back, maybe you should work on your resume first.
>>34671913
greentext pls
>>34673269
I have a SF3P but I'll probably package that with the upper I'm selling.
>>34673261
That's kind of where I'm leaning, but I also think the SFMB would be aesthetic but the FH/Comp makes more sense.
>>34673269
URX panels coming soon, but I can't decide between black or taupe.
>>34673269
Acid reflux?
Captcha: Acapulco Santa
I need that in my life.
>>34673448
Good morning CaliperAnon
>>34673448
what type of finish? duracoat? ceracoat?
>>34673468
Top-o-the mornin' to ya bb.
>>34673473
Nothing so illustrious, Aervoe military vehicle paint in field drab.
>>34673444
What's the colour scheme for the rest of the rifle?
>>34673448
Yeah...something like that ;)
and Good Morning (I said it before bb but it got lost in the mail)
>>34673235
>>34673269
>/arg/ hates a2x
>loves sf closed tine
y tho?
>>34673497
Morning Matey.
>>34673497
I haven't decided whether or not I want to go with a FDE/Coyote SOPMOD or CTR stock and FDE MIAD or MOE grip.
I thought about doing that to match the ECOS but I'm also tempted just to keep it all black and paint it.
>>34673235
Morning bbz.
My vote is for the closed tine warcomp.
>>34673512
All black.
>>34673531
Damn that makes me wanna go hike in the hill country.
>>34673503
Ever since that genius line about venomous snake camos the other day I just want to do a fuck ugly rattlecan paint job on everything I own
>>34673512
Paint the whole gun or just the ECOS?
>>34673542
> fuck ugly rattlecan paint job on everything I own
They can be a bit much if you don't idle it back.
>>34673448
What handguard is that specifically?
>>34673538
Weekend is coming up!
>>34673542
>Paint the whole gun or just the ECOS?
I'd paint the whole gun
>>34673568
It is a MI gen 2 drop in quad rail, non free float. I think I'll be replacing it soon.
>>34673542
This pic is a bit more sedate.
>>34673589
It is and I need to get back out there but I just finished the office floor so I need to get all my wife's craft shit out of my gun room.
Damn my Captcha's on a roll today: Alpaca Picasso
>>34673503
>wgws shooting the bfs lower (A2 in the background)
>>34673604
P-paint it yellow
If you painted the whole gun without getting the "distressed" look, it would look strange imo but FDE and black two tone kind of like CaliperAnon's looks nice. You also already have a coloured ACOG, would be a waste to paint it
>>34673614
>>34673618
I wanna...but I know it'd look like ass. Maybe if I build a pistol soon
>>34673637
Trust me, I've already thought about painting this yellow if I do mk18 it
>>34673626
>>34673503
I want it bad.
How is the truck doing?
>>34673656
Surely you can find a local waterjetter.
Man, I love it. I don't know how it would completely compare to the Tacoma I was shopping for but I know its got better gas mileage and more power. This little 3.6l will smoke my old 5.4l on its best day. I'm filling the tank every 2.5 weeks now instead of every ~1.2 weeks and my route is the same. Plenty of room under the back seat for a complete medical kit, rifle, ECWCS set, and a bag of tools. Bad ass sound system with blue tooth and all that bullshit.
I just want to get a bull bar, HAM and CB installed and I'll be set.
>>34673691
I was asking about FA's truck. What do you drive?
Bull bars are for posers. Get a real bumper or leave it.
coffee is 9/10 t b h
>>34673779
So I got a DPMS AP4 (M4 clone) and i want to get a full rail on the shit but i dont want to dish out the money for another gas block and also there is the fucking pin holes forever in mt damn barrel and i just want them to be used so I want to cut the triangle front sight down to make into an impromtu low profile gas block like in the pic. How many of you have done this before?
>>34673789
>mk18
pic related
>also no rear irons and b5
>>34673789
same here, 9/10
>>34673804
it says mk not mk18.
>>34673807
ive never tried their bottled stuff
>>34673789
That good huh? Nice
How are LaRue barrels?
>>34673847
good and pretty affordable
>>34673852
Are they on par with DD/BCM/FN/Colt/BA?
>>34671909
Thanks anon
>>34673855
You'll generally get better accuracy out of the Larue than all of those
maybe not as long of a barrel life though
>>34673800
Someone here has pictures, can't remember who though. Just take it slow and don't remove any more than what is in that picture
>>34671784
buying steel cased ammo
WHY?
>>34673855
>DD/BCM/FN/Colt/BA
one of these is not like the others
SP1, R6601, 6520
>>34671821
Am I retarded or is that rail both M-LOK and Keymod?
>>34673793
My Chevy shit brother.
>>34674076
>GMC
in.
Practice shooting on the submarine base today. Possibly SEALS practicing terror attacks on the boats. Hearing blanks all day.
>>34673448
I just want to say I really like your rife. It's very aesthetic.
>>34674067
yes.
>>34673501
because they're all clonelets, they don't think about what they're doing, they just buy what other trips are buying
>>34674024
You're right, BA shouldn't be there
>>34673501
One is bcm, one is surefire
One is a fh, the other is a comp/fh
>>34674025
And just like that I once again want an A2
>>34674160
That's what I was thinking :/
>>34674165
neither are aesthetic and both are comp/fh tho
>>34674173
SF one is aesthetic, and can mount sf devices.
Ordering an optic and a maxim defense PDW brace for the shorty.
>>34673235
Honestly this question is best answered with another question, do you have or do you plan to get a suppressor?
>>34674160
you're right, BA is actually good.
>>34673235
Also, I dig my SiCo Saker Trifecta three-prongs. They don't twang and I get almost zero flash at night with everything from 40gr prairie dog loads to 77gr SMK loads.
>>34673800
bro gas blocks are like $20 or less
>>34674220
So are all the others, only the BA is not chrome-lined. Do you even Sesame Street?
>>34674229
>SiCo Saker Trifecta
It's so uggo af tho. Don't get one until you can hide it under a can.
>>34674166
Do it.
>>34674127
I appreciate it, I love my rifle very much.
>>34674076
Aaaayeeee! Been a while since I've owned a General Motors. The last one was my 2002 WS6 Trans Am.
>>34673050
Why would you move the light back. That would just cast a larger shadow of your gun and lessen the effectiveness of the light.
>>34674239
>fn
>>34671784
I don't wan't to see your mini gun.
>>34674067
You're retarded. The other holes are A. To short to be mlok, B. Cut to lighten the weight.
>>34674277
Are you saying FN barrels aren't chrome lined?
>>34674177
a2x and sf ct look almost identical, at this point your just being obstinate on completely different level
>>34674207
Is that an SBR or a pistol? Also, what optic is on the middle rifle?
>>34674329
-_-
>>34674329
pistol and vortex razor HD 1-6x
>>34674329
Its a pistol, that is a KAK Shockwave Blade brace on it. The optic is a Razer HD II 1-6 with the JM reticle, which I love.
>>34674340
Too heavy
>>34674215
Yeah, I haven't decided on what can yet. It'll either be SF, SiCo, or AAC I think. I haven't yet decided. Leaning toward SF but exploring other options.
>>34674229
Good to know
>>34674353
Time for a nap
>>34674370
its 10am
>>34674368
if you can get past being Surefire Coolguy, there are superior performers that cost the same or even less
>>34674323
>>34674330
?>>34674339
>>34674340
Thanks for the replies. How does the razor compare to the strike eagle? Also, what are the benefits of a pistol vs an sbr? Is it just so you don't have to pay the tax stamp?
>>34674381
The reason I lean towards SF is because the clone will probably end up with a SF md as well.
Ignoring that, I'm willing to give other suppressors and muzzle devices a shot. I'd even consider getting the BE Meyers 249 Saker if I was set on SiCo
>>34674392
Almost identical
>>34674401
Anon isn't exactly wrong, your conformity is misleading you
>>34674412
Hes just mostly wrong
>>34674401
Drill some holes in a2x then give it the giddy special with a dremel, recoat it and there ya go. identical twins.
>>34674396
Much nicer glass, more rugged, excellent reticle, and the eyebox is gigantic even in 6x. The dot makes it fast as fuck, especially in 1x. The price is much higher, however, and it isn't a lightweight.
As for why a pistol, I'm in IL and you have ot jump through hoops to get an SBR and I don't feel like fucking with it presently. The Maxim PDW brace I'm getting is comfy to shoulder and reduces OAL nicely, so I don't mind the mild compromise.
>some nigger wants to trade his """"custom"""" stippled and cerakoted glock for my mk12 upper
>>34674470
Why would he overpay so much?
>>34674477
The kryptek cerakote adds 400% value
>>34674470
I'll trade my 442 for your cheapo mk12 upper
>>34673068
>surplus pulled
I haven't seen pulldown m193 for years, and I can get new Hornady 55gr for cheaper than pulled M855. Plus they're more consistent.
Convince me not to go 249 & SiCo Saker can over SF Warcomp CT and SOCOM can
>>34674548
249 is the better FH. Saker is the quieter can. Whole setup will be ~$600 cheaper.
>>34674588
>~$600 cheaper.
Seems to me to cost roughly about the same amount either way
>>34674401
That's a Warcomp, it's midly different, but you'd better believe the CT looks EXACTLY like an extended A2. It's frankly embarrassing that nocans on /k/ pay this much for a literal A2. The warcomp at least pretends to do something more, even if it too is useless and nobody on /k/ has or will ever have the appropriate silencer to put on it.
Ordered something for $12 off BFG and got a chapstick, 2 stickers and a pen... Laruefags btfo
>>34674645
oral lube stick
>>34674640
>even if it too is useless and nobody on /k/ has or will ever have the appropriate silencer to put on it.
This, they'd rather invest in peqs that they don't have nods for or peqs and nods than suppressors for some reason.
Giddy at least has a SF can but I think he has muzzlebrakes on his.
>>34674654
Didn't even see the warning on it yet
kek
>>34674492
Got some South African M1A3. But no, since then I haven't seen any and have been using Hornady 55gr FMJBT And 62gr FMJBT >>34674548
>>34674654
>aloe vera
Perfect for matey to rub all over the friction burns on his lips then
>>34671899
has nothing to do with what your shooting at, its about what steel (which is hard) vs brass (which is soft) does to the inside of your rifle
>>34674634
..how? A Saker is $800, a SOCOM is $1200
>>34674667
He knows that brakes spare the blast baffle, and you don't shoot without the silencer enough to use a flash hider.
>>34674703
Well that wasn't very nice
I'll trade you the whole tube for the mk12 upper
I'll even throw in the pen as a token of friendship
>>34674727
$1400 one time deal only since I already have to drive to USPS today
>>34674715
That's a $400 difference, ignoring the fact that you can readily find deals on the SOCOM suppressor to put it between $899-$999. And there's really only a $20-30 difference between the 249 Saker and whatever SF muzzle device you'd like.
>>34674725
Is that as important on a 14.5" or 16" as it is on a SBR? That was one of the reasons why I was considering the SFMB and warden and just dealing with it until I got the can.
>>34674453
Sounds like a solid idea, what's the barrel length on your pistol? If i wanted to set one up is it as easy as changing out my upper?
>>34671784
I'm no expert but I don't think you load a rifle like that
What FH should i get to replace my basic bitch A2?
>>34674824
Just keep your A2
>>34674640
It looks cool though
>>34674747
No, I don't use a brake on my 18". In fact I don't use a brake on my 12" either because they are SO incredibly obnoxious that even the rare possibility of shooting without the silencer is enough for me to have installed a FH.
But it's still smarter to use a brake to preserve the blast baffle.
Dead Air's brake has blast diffuser ports on the side which, to my ears, significantly reduce the oppressive blast of the brake, at least on 20"+ .308s. On my 16" .308 I use a FH because I shoot it mostly without silencing can.
>>34674824
Another A2 if you have to replace it. Why do you want to replace it?
>>34674931
>a2x looks like ass
>drills some holes in it and it becomes aesthetic
SF fanbois are delusional
>>34674934
Mines new but i figured there might be a more effective one out there
>>34674934
That's kind of what I thought. I was tempted to go SFMB because I've got a warden just collecting dust but I'll probably just sell that.
>>34674949
I'd just keep the A2 unless you know there is a suppressor you want or you want a purpose driven brake or something along those lines.
>>34674944
>Not friviously spending money
It's like you don't even /arg/
>>34674986
Psi pls
>>34674949
As far as I know, nothing is as good as A2 at flash hiding and also a little bit (I want to sasy 10%?) of compensator effect due to the bottom slits being covered.
>>34674931
>>34674986
This is the point, really. Which I don't get, especially /k/ where people don't have that kind of disposable income. I hate spending money for no reason, it triggers me worse than husky owners.
>>34674974
>just keep the A2 unless you know there is a suppressor you want
Exactly this. you buy the muzzle device that mounts your suppressor. Otherwise get an A2 or an effective brake, depending on what your needs are.
>>34674998
qb and his $1200 flashlight
>>34675007
I think it's cool looking. I'm still looking at extended A2s because if I can find one cheaper I'll buy it. But Burt remember, we're in the gun game. You literally throw money down range.
post yfw you realize sf released the closed tine just because they knew it'd get endless (you)s
>>34674974
>>34675007
Also, the A2 gives you the best performance in the shortest package for a 16" barrel that I can think of. My first build was a 16" with a 249F on it and it way way too fucklong. Eventually I took off the 249F and put an A2 on there.
The only reason I'm looking at another 249 is because of the Saker mount and being p&w on a 14.5"
>>34675055
>I'm still looking at extended A2s
There's literally no reason for this ever if you have a 16" barrel and don't plan on getting a SF can.
>>34674076
I usually drive Fords but I'm fond of the Chevy design. Maybe Burt can show us his model t.
>arg finally realizing pointless gucci is retarded
I like this turn of events
>>34675105
I've always liked the simplicity in your rifle
>>34675105
Everything is coming back to block Is and M4s soon. Not too long before it's kill for good
>>34675084
There's no reason to put a 6 inch diffuser on an 18 inch barrel either, but it's me fun to do to trigger /arg/
And it would be going on a 14.5. And I like the look of them, which is all that matters.
>>34675055
>extended A2
Are stainless barrels really more accurate or is that a meme?
Also, would you friendly trips recommend PSA or Aero for an assembled 18" upper?
Time to spraypaint the nightforce again.
Ill want the aadland caps before i do the kahles.
>>34675119
Suit yourself. I'd look toward the future when shopping for a MD for a 14.5"
>>34675116
It's all cyclical, the gucci game will come back one day.
>>34675145
>gay pirate lower
>>34673789
Hahah damn that is surprising it is good.
>>34673793
Fucking nice. Except the wheels. Matte black with brushed aluminum trim and faux beadlocks is fucking cancer.
Also running boards need to go.
>>34674108
Seems neat.
>>34674654
>Aloe Vera
Neat.
>>34675147
Aero unless it is a CHF PSA but I don't think they have any CHF 18" AFAIK.
A quality stainless is more accurate. A cheap POS stainless is not.
Anyone know of any ambidextrous flared magwell lowers?
Also 14.5" carbine gas "gunner" or "Hanson" profile barrels?
>>34675166
One of these days /arg/ will get super autistic about Mk12s
>>34675186
unlikely, it's a badly outdate design
>>34675186
They did once. It's a passing fad
>>34675189
Did you forget the time everyone was buying RIS IIs??
>>34675198
Do you remember the time Bobby Boucher showed up at halftime and we won the bourbon bowl?
>>34674751
Mine is a 10.5" barrel, and something around that is probably going to be ideal. You'll want a dedicated pistol lower, as the ATF likes this thing called constructive intent. Do some googling on that. Also, I think if it was once built as a rifle it cannot be converted to a pistol, but a pistol can be converted to a rifle. Google that to make sure. Plenty of AR15 pistol guides online in any case.
>>34675206
>niggerball lite
>>34675198
lol I'm so glad I never fell for RIS II meme.
>>34675206
I member
>>34675212
>Not paying 700 bucks for a rail every hates 4 months later
>Not being Psi and going through 4 of them before finding a good one, only to sell it 3 months later
>>34675212
The non FSP one doesn't even have the barrl nut aesthetic bonus the Laure or KAC does, and it's heavier IIRC
>>34675224
Has he parted out his new build yet
>>34675236
Which build, the m4 or the *cough cough* gucci build? I know he's sold like 6 RAS sets he keeps acquiring.
>>34675249
249 Saker on order
>>34674260
I'm a pretty big GM whore. 2 Impalas and now this. I want a 67 GTO and a Duramax and I'll have enough GM shit to last a lifetime.
>>34675089
I want to see what El Burto rolls around in as well.
>>34675285
I don't care.
didn't mean to >>34675249 you
>>34675296
ree
but really, sorry I don't know what is going on with muh phone
>>34675287
>I want to see what El Burto rolls around in as well.
Speeding to the gun shop
>>34675236
He will once he realizes he bought the Bubba Gump of rails
>>34675317
You think he shares his sips and Wendy's with the horse?
Bump for 14.5" carbine gas 5.56 barrel with a "
gunner" or "hanson" profile.
Would also consider 13.7" carbine gas same kinda thing. Most can compatible muzzle devices are pretty long right? Could pin and weld to a 13.7" to bring up to legal length?
Approx wait times on cans right now?
Ambidextrous lowers with flared magwells?
>>34675307
My sentences are fucked up today, autocorrect is having a field day.
>>34675331
I think he is pretty territorial with his Wendy's.
>>34675334
Current wait? A year.
If you file soon? A few months
>>34675349
I am confused. So currently people are waiting about a year but upcoming can files will be less than 6 months?
>>34675334
It's like you're trying to get me to post my meme.
Boof says wait until after the 1st to apply for cans so new ATF processing rules can take effect. NFA wait times are currently approaching a year. I personally am 10 months in on a form 1 and cans usually take longer.
>>34675359
Did you already forget what boof said
Bought IS300 in 2001, still drive. Pic related The Great Portland Snowdown of '08.
>>34675317
>>34675287
Ford fusion
>>34675359
Yes
>>34675334
>Could pin and weld to a 13.7" to bring up to legal length?
BE Meyers 249 yes. I'm not sure of anything else that'll bring a 13.7" up to 16"
I think the SFMB and SF3P can take a 14" up to 16"
I just ordered a 249 Saker but it'll probably go on a 14.5" DD LW barrel. The BA 13.7" or 14" hanson profile was tempting though.
>>34675368
That's a nigger car.
>>34675397
>13.7"
It's such an awkward length though. Not many good rails to choose from that will get a nice flush fit behind the md
>>34675409
My insurance was absurd in the '00s, like $3,600/year because it was almost exclusively driven by rich Southern California asian DORIFTO KINGU who crashed them constantly. I knew a Chinese kid who crashed TWO of them before his parents bought him an M3. Which he also crashed.
Nigger car my ass.
>>34675411
I'm pretty much stuck with 14.5" and my URX 3.1 but that's okay. It'll only be a little longer with the 249 than the SF3P.
>>34675453
>chinks
>not another form of nigger
>being blinded from this by living in a liberal paradise
>>34675456
14.5 and URX 3.1 are a good match especially if your barrel is gov profile, makes gun look like it lifts
>>34675468
>lowest amount of crime per capita vs highest amount of crime per capita
Kys whiteboi
>>34675361
>>34675367
Okay cool thanks.
>>34675368
Good taste.
>>34675397
BE Meyers okay neat. So 14.5" is probably the safer bet for non SBR can host simply because not many long can MDs are out there? A2 has convinced me that being able to easily cross state lines is important.
>>34675411
>Not many good rails to choose from that will get a nice flush fit behind the md.
See pic related.
Any over barrel cans out for ARs?
Is AAC actually shit?
>>34675475
>neither good nor flush-fitting
>>34675474
>eats dogs vs beats dogs
>>34675490
>dogs raised as farm animals are the same as home doggo
Uneducated whitey spotted
>>34675489
Just ignore him, he's tarded.
>>34675499
>kitten chow mein
>>34675474
>>34675470
Which is funny because it's only 0.5 oz heavier than the geissele mk8 and is lighter than the mk4 which is a closer mlok facsimile of the URX.
I don't see any reason to go government profile though.
>>34675510
>>34675499
>naming your cat after what you're gonna make out of her
>>34675510
Put on glawk
>>34675509
>>34675525
>couldn't find one without the line
Hello
Military is switching me from best m4 in the base with the best acog in the base to a trash m16 with no scope and I'm pretty sad.
Console me lads.
>>34675542
Be excited that you have reached true ascension
>>34671784
This pic makes me really nostalgic over my early days of /arg/ing when I only had one AR and bought bucketloads of steel case...
>>34675489
SLR rails are fine, and my point was simply that some people aren't too anal about bringing the rail right up behind the MD.
Wrote another email to Adams Arms.
Battlewerx screws and sealing plate came in. Sealing plate seems good. Good customer service on Battlewerx's part. They upgraded my original order of a stainless plate to a black ano plate free of charge. Screws do not thread into slide as expected.
It has been a whole business week and Adams Arms still hasn't sent me a shipping label yet for the warranty return.
>>34675475
>Is AAC actually shit?
Yes
>Any over barrel cans out for ARs?
Yes but you dont want them
Have a good evening /arg/
>>34671784
>>34675673
slavaboos need to be taken out back and done away with
What handguard accessory should i pick up? Afg? Vfg? Handstop?
>>34675711
it's 100% preference
>>34675673
>posp
>enlightened
>>34675717
Well shit, do they make good afgs for keymod? Guess I'll just try them all
>>34675798
>>34675711
BCM Stubby VFG
>>34675673
>all awful rifles
>>34675823
ITS JUST SO COMFY
>>34675721
requesting full image please
>>34675711
Between those three items it will come down to what is comfortable for you.
Just buy what you think looks cool, or what you can see yourself using. Use it, and decide if you like it.
>>34675669
How fast do you think cans are going to be if BOOF is right?
oh shit an anon thread
>>34675171
>running boards and rims
I hate them. They came on it, I just want some stamped flat black rims and I really hate those useless slick as snot running boards.
>>34675510
jej
>>34676025
Good job captain happy, glad to see you're paying attention.
>>34676025
and surprisingly, not shit
>>34676271
>captain happy
what?
>>34673444
Fuck, I want that rail
>>34675978
why haven't you killed yourself?
Who ever recommended the vtac sling to me, thanks
Also post creek
>>34676309
Why haven't you?
>>34676293
>surprisingly
the posts determine the quality as long as OP posts in the traditional format.
and the same people who complain about the threads being shit are the ones shitting it up with degeneracy, anime, shitposting about the same thing over and over.
dont blame the op, thats weak.
>>34676309
>>34676293
if you say so
>>34676336
well for starters, i don't look like this
>>34676349
Why are you so obsessed with fluffy
>>34676359
people are always scared of change
>>34676359
Success breeds jealousy
>>34676377
I'm glad you seem to be doing better. qb is static.
>>34676377
why did you even bother to hide your face
>>34676393
do you think he has a job now?
>>34676349
Post a pic of yourself faggot
>>34676359
He hates on fluffy so he can feel better about himself.
>>34676359
He has nothing else, just alcohol and cats.
>>34676501
stop gucci posting.
>>34676548
I didn't give you permission to respond to my post.
>>34676563
that looks like a giant vagina suit
>>34675536
"No."
>>34676501
>>34676548
>>34676563
People freak out of the Norks hitting Cali with a nuke. In my opinion they'd be doing the world a favor.
>>34676594
That looks like a school dance party after everyone bought clothes at Goodwill.
>>34676600
ugh... that looks beautiful burt.
>>34676600
>plate face down
Take the pic again
>>34676609
gucci ran out of ideas so they are doing a weird retro thing.
>>34676607
i have family there that i very much love, and i would still vote to nuke cali.
>>34676205
>Stamped flat black wheels
I like you more now.
>>34676600
What slide are you waiting on. Adams Arms customer service sucks.
https://www.inlanderarms.com/products/polymer80-pf940v2-80-pistol-frame
Waiting on that.
>>34676623
thats face up idiot.
>>34676600
Why could they not do the full size like that instead of that half abortion that looks like it was raped by an XDM?
>>34675510
>>34676719
>>34676709
look carefully moron, thats not an aluminum plate.
do these kids get more retarded by the day?
>>34676623
I don't have the new plate yet, this >>34675510 is from the engraver.
I also don't have a slide so I couldn't install it if I did.
>>34676687
They are, which is why the full size ones have been liquidating for $45 lately. The new one (I suspect, I have no inside info) will be shaped like the compact. I.E., not trash.
>>34676627
Lone Wolf, no markings, no engraving, no embellishment, just a Block. I'm trying to make it featureless. Except for the cock bulge now god damn it.
>>34676761
rip
How long till you receive it then
>and how long till i get it
>>34676761
>The new one (I suspect, I have no inside info) will be shaped like the compact. I.E., not trash.
Thank god for that. Still haven't figured out how they justify selling an 80% then even when getting bargain basement parts still ends up cheaper than an off the shelf Glock. I guess its one of the "lol this is custom so it ok" scenarios.
>>34676406
You are fluffy but if a ""nice"" job had been dropped into his lap.
>>34676774
I'm bound by the contract of dubs to put it on my Block so never, though I would gladly send it if this were an option.
Plate should be here in a day or four, the slide they tell me """""""""""""""""""""""two weeks""""""""""""""""""""""".
>>34676837
You'll get aggravated by it eventually, when you do I'll buy a cheap blawk to put it on :^
>>34676761
>Featureless
Full size PF940V2 is coming soon. Want to buy my brand new G17 MOS Slide assembly?
>>34676855
>and i got more dubs just to rub it in burt's face
>>34676837
If dubs you can throw that plate in the trash
>>34676907
top rekt
>>34676837
put it up your butt first
>>34676871
No, I don't like the MOS, optics are needlessly high up because of that dumb stupidly thick adapter plate. They should mount directly to the slide, as low as possible. S&W did it better with the CORE years ago by drilling multiple hole patterns into the slide itself, accompanied by very thin optic-specific sealing plates.
Block just can't get anything right ever.
>>34676871
>>34676994
Pic also related.
>>34676994
>Block just can't get anything right ever.
burt delete that right now im serious.
>>34677049
>just can't get anything right ever.
Hit too close to home?
>>34677085
yea i love my glock.
>>34677099
how do you like that D3 sling
>>34675823
FAGGOT
>>34676994
Mos is bad because its not very robust.
Height of optic is almost meaningless. Pure software issue.
>>34677144
>Height of optic is almost meaningless
You would have to say that to justify a six second mount. That optic is in the magnetosphere. You must have to adjust your entire body posture to get your eye behind that thing.
There's a reason pic related mount exists. It's not a "software issue." Height most certainly matters.
I get that this is a video game but what rail and barrel length on this gun?
>>34677209
A fictional 18" one which ignores M-Lok specifications.
>calle calle
>>34677111
its pretty comfy, but then again the only thing i personally can compare it to is a cheap nylon sling i was issued.
Burt is a commie
>>34677280
>i was issued
explains a lot
Didn't see a bst thread.
Anyone building am AR in TN?
I'm selling for 125.00
Generic upper
Mohawk Armory lower
MFT grip
8 Pmags/ 4 tan 4 black (30rnds)
5 aluminum mags (30rnds)
>>34677628
new>>34677676
>>34674231
I am not buying a cheapo gas block, i have heard that those are fucking shit, that gas block can get hot as hell and those cheap ones cant handle the heat.
So, can anyone really tell me that the magpul UBR stock isnt the sexiest fucking stock ever and youre a little bitch if you dont have one?
>>34673482
love your setup anon