Ok guys, as promised, here it is. How to build an M16A1 clone from a Colt M16 parts kit...
Where's the best place to find original Colt kits?
*clapping intensifies* /k/ube bless you, you glorious bastard
>you do know that's flan right?
I know exactly why I have this boner.
God Bless America.
I went to the /k/ meetup at a public range (and goddamn it was crowded) crossdressed
everything will work, but it won't look 100% correct as the A2 is re-enforced at the rear
I laughed, I admit, but god damn they need to use moisturizing lotion if they want to do close up shots of their hands.
I would have noped out so fucking hard
Flandre or not
damnit, I left my daki in the car during the pictures. I don't think i could have taken it out though. range officer would probably have made me leave once he saw the naked side lel
I really only have some for collecting reasons. I don't really care for shooting them
>I really only have some for collecting reasons. I don't really care for shooting them
Same, I never cared for the AR, although I did favor them full length with fixed charging handles.
Also you look good.
although I do have to take that back.
I have 1 AR that I enjoy shooting
only my gf has access to that
That does look quite nice. This is the closest thing I have to an AR for now.
Do you remember how many of those parts kits were in stock when you bought it? I'm not sure if I want to do a build now, but there are only 5 left, and I'd like to wait until my next paycheck to buy one.
>only my gf has access to that
>tfw my ex girlfriend who liked guns and I met on 4chan liked getting fucked while _I_ was the one wearing blue panties
I really need to look her up again.
Here, have my raifu in return for the memory. Just built her.
1. Found a deal on a mint ban-era Colt Match Target upper with a target crown muzzle.
2. I live in a ban state and it was far less trouble than getting a brake welded on that could never come off without damaging the gun. You'll notice I also have no bayo lug.
jebus tity fucking christ the first 30 second of that video
my fucking face
also thanks flandre :3
Guy on the front left with the gasmask on:
nice, I recently finished my 5.56 AK-101 (the one all the way on the right)
but I paid $275 a few months ago off of Royal Tiger. I'm guessing they increased their price as the stock ran low. can't remember how many kits were on but it seemed like a good amount at the time.
mine is a childhood friend of mine. We literally grew up together, getting into all the weird shit on the internet. our tastes are almost identical as we literally fed off each since childhood.
I love it, I wish they had a standard contour barrel rather than a heavy barrel for the 12" configuration, as it is a little heavy with that.
but god damn that thing is accurate, no muzzle rise, and just a blast to shoot.
You know what makes it even better/worse? It's actually a good informative step by step video. I can see comrades actually using it as a guide to set up their ARs. All this guided by fucking Touhou girl (Cirno? Mariza?, sorry I can't into this).
I like it, although it is a little heavy for an optic I have to say. probably going to go with a pk-as instead.
pretty much, I always have more projects to work on that I can think of
but yeah there were a few steps missed, particularly installing the front sight post, which is probably the most challenging part of the build. I didn't think to make a video till I had already finished that step and that's when the idea came to my head
>what if I made a how-to video crossdressed
>Not making a video of slowly field stripping a rifle while slowly stripping himself at the same time.
They don't have USGI markings, but the design of a basic alloy lower is A2. Mine's an Anderson.
the A2 lower is not the correct lower for an a1 build, but because Nodak Spud is the only company that makes the correct a1 style lowers, they have like a year backlog on them.
pretty much any other forged lower you find out there is a2
I suppose like this
I used one from AR15sport in a better twist rate, they also have the FSB installed
they are hard to find
That I had already completed it before I had thought about making this video, after gauging interest i decided to do it but I wasn't able to cover that aspect. you have to clamp the front sight down really well after aligning it properly , and then drill through the barrel. then use a hand taper to taper the barrel and punch in the pins.
These guys do have a good alternative to the green mountain barrel, although Green mountain is known for their quality and performance.
Although, if you dont want to drill, taper, and pin the FSB, this looks like a good alternative.
comes with an A1 front sight, and has the correct 1:12 twist rate like the originals, and the bore is chrome lined.
looks like you can get them 1:9 twist for a little cheaper though, not chrome lined though.
>earlier today was thinking of ordering shit for a retro ar
>learn how to assemble a retro ar15 by some spic weaboo dressed in a moeshit princess dress while listening to moeshit music
maybe i should make a video with the lower i have sitting around
and i guess wear my dress or whatever
Why on earth would somebody go out of their way to buy a Shrubmaster stripped lower? You want to take the time to build a high quality rifle and still make people think it's a POS assembled by Remington monkeys?
>in shitty mood
>come to /k/
>see attractive kawaii crossdresser build m16 and weakly smile for me
a-am I a faggot?
>mfw that last smile and wave
>This fucking video
I DEMAND gifs and webums
I would do it myself but I am retards at cumpooters
>tainting the best M16 with your shit
I'm gettin real fuckin tired of your shit, Flandre.
Never change /k/.
I see you back there LMJ.
>even when OP isn't a faggot, OP is still a faggot.
Why do I even bother?
Please /k/, may I find some more faggotry?
I wasn't able to due to that ATF raid on them
tiger royal, back when they were $275
uhhhhh, with the correct lower, I'm going to estimate $750
>see flandre at firing line in full drag
>surprisingly good form
>he's doing fine but want to get closer for reasons
>"you should try it like this"
>put arms around him and press entire body against his so I can guide him into proper form
>can feel his breathing get heavier and hands trembling
>switch safety to full-auto
>"squeeze it for me"
>cock is being massaged between flandres buns
>can hear flandre whimpering in the pleasure of being held by a fellow /k/ operator
>pre-cum stains pants
>"y-you got it now"
>go back to firing nugget
>flandre checking me out constantly when I go to firing line
>gives me digits at end of day
>meet up later and fuck
it was a good day
I have fired an M2 outa the back of a GPW. At an iron riveted bridge. We would take turns driving and shooting.
When the old M2 was firing the entire jeep was rocking. Fun stuff. Mixed belt of AP and Tracer. We would link the mounted ammo can to one on the floor. When the barrel got hot, we would switch it out, check the headspace and do it again.
/k/ is filled with autistic furfaggot faggots horsefuckers who do nothing but watch anime, mlp, and hickok45 all day while cradling their slavshit and a mosin shoved up their asses so far that it makes them cry out sergei and Léon's names.
That's a precise description and I'm not mad about it.
I NEEED TO KNOW, THOSE EYES ARE BONER INDUCING!